DNSCrypt

A protocol for securing communications between a client and a DNS resolver.

Description

dnscrypt-proxy provides local service which can be used directly as your local resolver or as a DNS forwarder, authenticating requests using the DNSCrypt protocol and passing them to an upstream server.

The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography and is very similar to DNSCurve, but focuses on securing communications between a client and its first-level resolver.

While not providing end-to-end security, it protects the local network, which is often the weakest point of the chain, against man-in-the-middle attacks. It also provides some confidentiality to DNS queries.

Download and integrity check

DNSCrypt can be downloaded here: dnscrypt download

Note: dnscrypt.org is now blocked by the Great Firewall of China. But the site can be accessed at dnscrypt.bit instead. Or if your current DNS resolver doesn't support Namecoin yet, the source code can also be downloaded on Github, in the "releases" section.

After having downloaded a file, compute its SHA256 digest. For example:

$ openssl dgst -sha256 dnscrypt-proxy-1.4.3.tar.bz2

Verify this digest against the expected one, that can be retrieved using a simple DNS query:

$ drill -D TXT dnscrypt-proxy-1.4.3.tar.bz2.download.dnscrypt.org

or

$ dig +dnssec TXT dnscrypt-proxy-1.4.3.tar.bz2.download.dnscrypt.org

If the content of the TXT record doesn't match the SHA256 digest you computed, please file a bug report on Github as soon as possible and don't go any further.

Installation

The daemon is known to work on recent versions of OSX, OpenBSD, Bitrig, NetBSD, Dragonfly BSD, FreeBSD, Linux, iOS (requires a jailbroken device), Android (requires a rooted device), Solaris (SmartOS) and Windows (requires MingW).

Install libsodium. On Linux, don't forget to run ldconfig if you installed it from source.

A "minimal" build of libsodium (--enable-minimal) works equally well as a full build with this proxy.

On Fedora, RHEL and CentOS, you may need to add /usr/local/lib to the paths the dynamic linker is going to look at. Before issuing ldconfig, type:

# echo /usr/local/lib > /etc/ld.so.conf.d/usr_local_lib.conf

Now, download the latest dnscrypt-proxy version and extract it:

$ bunzip2 -cd dnscrypt-proxy-*.tar.bz2 | tar xvf -
$ cd dnscrypt-proxy-*

Compile and install it using the standard procedure:

$ ./configure && make -j2
# make install

Replace -j2 with whatever number of CPU cores you want to use for the compilation process.

The proxy will be installed as /usr/local/sbin/dnscrypt-proxy by default.

Command-line switches are documented in the dnscrypt-proxy(8) man page.

Note: gcc 3.4.6 (and probably other similar versions) is known to produce broken code on Mips targets with the -Os optimization level. Use a different level (-O and -O2 are fine) or upgrade the compiler. Thanks to Adrian Kotelba for reporting this.

GUIs for dnscrypt-proxy

If you need a simple graphical user interface in order to start/stop the proxy and change your DNS settings, check out the following project:

• DNSCrypt WinClient: Easily enable/disable DNSCrypt on multiple adapters. Supports different ports and protocols, IPv6, parental controls and the proxy can act as a gateway service. Windows only, written in .NET.

• DNSCrypt Windows Service Manager: Assists in setting up DNSCrypt as a service, configure it and change network adapter DNS settings to use DNSCrypt. It includes the option to use TCP/UDP protocol, IPV4/IPV6 connectivity, choice of network adapter to configure, as well as configurations for currently available DNSCrypt providers.

• DNSCrypt OSXClient: Mac OSX application to control the DNSCrypt Proxy.

• DNSCrypt Tools for Linux: A set of tools for dnscrypt-proxy. Features a start and stop button as well as options to enable or disable from startup. Developed for Porteus Linux.

Docker images

@mengbo maintains a dnscrypt-proxy Docker image as well as a dnscrypt-wrapper Docker image.

DNSCrypt-enabled resolvers

To get started, you can use any of the public DNS resolvers supporting DNSCrypt.

If you want to add DNSCrypt support to your own public or private resolver, check out DNSCrypt-Wrapper, a server-side dnscrypt proxy that works with any name resolver.

Usage

Having a dedicated system user, with no privileges and with an empty home directory, is highly recommended. For extra security, DNSCrypt will chroot() to this user's home directory and drop root privileges for this user's uid as soon as possible.

The easiest way to start the daemon is:

# dnscrypt-proxy --daemonize --resolver-name=<resolver name>

Replace <resolver name> with the name of the resolver you want to use (the first column in the list of public resolvers).

The proxy will accept incoming requests on 127.0.0.1, tag them with an authentication code, forward them to the resolver, and validate each answer before passing it to the client.

Given such a setup, in order to actually start using DNSCrypt, you need to update your /etc/resolv.conf file and replace your current set of resolvers with:

nameserver 127.0.0.1

Other common command-line switches include:

• --daemonize in order to run the server as a background process.
• --local-address=<ip>[:port] in order to locally bind a different IP address than 127.0.0.1
• --logfile=<file> in order to write log data to a dedicated file. By default, logs are sent to stdout if the server is running in foreground, and to syslog if it is running in background.
• --loglevel=<level> if you need less verbosity in log files.
• --max-active-requests=<count> to set the maximum number of active requests. The default value is 250.
• --pidfile=<file> in order to store the PID number to a file.
• --user=<user name> in order to chroot()/drop privileges.
• --resolvers-list=<file>: to specity the path to the CSV file containing the list of available resolvers, and the parameters to use them.
• --test in order to check that the server-side proxy is properly configured and that a valid certificate can be used. This is useful for monitoring your own dnscrypt proxy. See the man page for more information.

The --resolver-address=<ip>[:port], --provider-name=<certificate provider FQDN> and --provider-key=<provider public key> switches can be specified in order to use a DNSCrypt-enabled recursive DNS service not listed in the configuration file.

Running dnscrypt-proxy using systemd

On a system using systemd, and when compiled with --with-systemd, the proxy can take advantage of systemd's socket activation instead of creating the sockets itself. The proxy will also notify systemd on successful startup.

Two sockets need to be configured: a UDP socket (ListenStream) and a TCP socket (ListenDatagram) sharing the same port.

The source distribution includes the dnscrypt-proxy.socket and dnscrypt-proxy.service files that can be used as a starting point.

Installation as a service (Windows only)

The proxy can be installed as a Windows service.

See README-WINDOWS.markdown for more information on DNSCrypt on Windows.

Using DNSCrypt in combination with a DNS cache

The DNSCrypt proxy is not a DNS cache. This means that incoming queries will not be cached and every single query will require a round-trip to the upstream resolver.

For optimal performance, the recommended way of running DNSCrypt is to run it as a forwarder for a local DNS cache, like unbound or powerdns-recursor.

Both can safely run on the same machine as long as they are listening to different IP addresses (preferred) or different ports.

If your DNS cache is unbound, all you need is to edit the unbound.conf file and add the following lines at the end of the server section:

do-not-query-localhost: no

forward-zone:
  name: "."
  forward-addr: 127.0.0.1@40

The first line is not required if you are using different IP addresses instead of different ports.

Then start dnscrypt-proxy, telling it to use a specific port (40, in this example):

# dnscrypt-proxy --local-address=127.0.0.1:40 --daemonize

IPv6 support

IPv6 is fully supported. IPv6 addresses with a port number should be specified as [ip]:port

# dnscrypt-proxy --local-address='[::1]:40' ...

Queries using nonstandard ports / over TCP

Some routers and firewalls can block outgoing DNS queries or transparently redirect them to their own resolver. This especially happens on public Wifi hotspots, such as coffee shops.

As a workaround, the port number can be changed using the --resolver-port=<port> option. For example, OpenDNS servers reply to queries sent to ports 53, 443 and 5353.

By default, dnscrypt-proxy sends outgoing queries to UDP port 443.

In addition, the DNSCrypt proxy can force outgoing queries to be sent over TCP. For example, TCP port 443, which is commonly used for communication over HTTPS, may not be filtered.

The --tcp-only command-line switch forces this behavior. When an incoming query is received, the daemon immediately replies with a "response truncated" message, forcing the client to retry over TCP. The daemon then authenticates the query and forwards it over TCP to the resolver.

--tcp-only is slower than UDP because multiple queries over a single TCP connections aren't supported yet, and this workaround should never be used except when bypassing a filter is actually required.

EDNS payload size

DNS packets sent over UDP have been historically limited to 512 bytes, which is usually fine for queries, but sometimes a bit short for replies.

Most modern authoritative servers, resolvers and stub resolvers support the Extension Mechanism for DNS (EDNS) that, among other things, allows a client to specify how large a reply over UDP can be.

Unfortunately, this feature is disabled by default on a lot of operating systems. It has to be explicitly enabled, for example by adding options edns0 to the /etc/resolv.conf file on most Unix-like operating systems.

dnscrypt-proxy can transparently rewrite outgoing packets before authenticating them, in order to add the EDNS0 mechanism. By default, a conservative payload size of 1252 bytes is advertised.

This size can be made larger by starting the proxy with the --edns-payload-size=<bytes> command-line switch. Values up to 4096 are usually safe.

A value below or equal to 512 will disable this mechanism, unless a client sends a packet with an OPT section providing a payload size.

The hostip utility

The DNSCrypt proxy ships with a simple tool named hostip that resolves a name to IPv4 or IPv6 addresses.

This tool can be useful for starting some services before dnscrypt-proxy.

Queries made by hostip are not authenticated.

Plugins

dnscrypt-proxy can be extended with plugins. A plugin acts as a filter that can locally inspect and modify queries and responses.

The plugin API is documented in the README-PLUGINS.markdown file.

Any number of plugins can be combined (chained) by repeating the --plugin command-line switch.

The default distribution ships with some example plugins:

• libdcplugin_example_ldns_aaaa_blocking: Directly return an empty response to AAAA queries

Example usage:

# dnscrypt-proxy ... \
--plugin libdcplugin_example_ldns_aaaa_blocking.la

If IPv6 connectivity is not available on your network, this plugin avoids waiting for responses about IPv6 addresses from upstream resolvers. This can improve your web browsing experience.

• libdcplugin_example_ldns_blocking: Block specific domains and IP addresses.

This plugin returns a REFUSED response if the query name is in a list of blacklisted names, or if at least one of the returned IP addresses happens to be in a list of blacklisted IPs.

Recognized switches are:

--domains=<file>
--ips=<file>

A file should list one entry per line.

IPv4 and IPv6 addresses are supported. For names, leading and trailing wildcards (*) are also supported (e.g. *xxx*, *.example.com, ads.*)

# dnscrypt-proxy ... \
--plugin libdcplugin_example,--ips=/etc/blk-ips,--domains=/etc/blk-names

• libdcplugin_example-logging: Log client queries

This plugin logs the client queries to the standard output (default) or to a file.

# dnscrypt-proxy ... \
--plugin libdcplugin_example_logging,/var/log/dns.log

• Extra plugins

Additional plugins can be found on Github: Masquerade plugin, GeoIP plugin.