This program gets data from the BMP180 sensor. It uses a pine64 as its base.

In order to get this to work the following needs to be installed.

i2c-tools python3-dev python3-Adafruit-GPIO

RPi.GPIO also needs to be installed, if the pine64 is not working install the pine64 gpio library. https://github.com/swkim01/RPi.GPIO-PineA64

After those are installed the included Adafruit bmp280 library needs to be installed.

The program is able to run by overriding he Adafruit I2C library and forcing the program to return the correct setting for the BMP280 library to use. Once this is done the device is able to communicate correctly.

Import links for Pine64: http://joey.hazlett.us/pine64/pine64_pins.html

An example link for the database would be as follows

http://10.0.0.100:8000/data.sqlite

Above is just an example