-
Notifications
You must be signed in to change notification settings - Fork 679
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[BUG] MoesGo MS-105Z 1 Gang Dimmer module not dimming as expected via Home Assistant (TS0601 _TZE200_la2c2uo9) #1750
Comments
It works as expected with zigbee2mqtt |
I am having the exact same issue with ZHA. Please help. |
I am also having this exact issue with ZHA. |
Same happens for the two gang version, just installed one. |
I can confirm that the issue was resolved with the latest update of home assistant version 2022.10.4 |
I can also confirm that that this issue has been resolved with an update to Home Assistant 2022.10.x |
Reported as fixed. |
With the latest version of home assistant 2022.12.1, the issue is back. |
Someone able to test this fix?: |
I could test the fix, but I'd need some guidance (still don't grock containers very well). |
Thanks for the offer but the code would have errors, so better if can test it someone able to progress through the errors. |
Just updated to latest core. Not better than before :( Still can't dim,
just switch.
Il lun 12 dic 2022, 16:45 David F. Mulcahey ***@***.***> ha
scritto:
… Closed #1750 <#1750>
as completed via #1999
<#1999>.
—
Reply to this email directly, view it on GitHub
<#1750 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAODXYPPDXFEIU7OTZ3IDZ3WM5CC5ANCNFSM6AAAAAAQLNJWEA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Will be in .4 it isn’t in .3 |
Describe the bug
I am using an EFR32MG21 based Sonoff Zigbee 3.0 USB Dongle plus ZBDongle-E with ZHA in Home Assistant. I have added a 1 gang MoesGo Smart Dimmer Module MS-105Z with a switch and one dimmable LED connected for testing. I think it is the same as this: https://zigbee.blakadder.com/Moes_MS-105Z.html It is discovered as a light named
_TZE200_la2c2uo9 TS0601 Light
and it has a switch and a dimmer slider in the Home Assistant UI.I can manually control the brightness by keeping the physically connected switch on until the desired brightness is reached, so the LED dimming circuit and the attached LED bulb works.
However, when I try to change the brightness through Home Assistant, the following happens:
To Reproduce
See description of the problem
Expected behavior
The dimmer's brightness should be directly controllable via the brightness slider. It should not require turning the switch entity off and on again. Any interaction with the slider should leave the switch entity in its previous state.
Device signature
Diagnostic information
Additional logs
The text was updated successfully, but these errors were encountered: