V2 Hardware Design

PCB changes:

1. Changed the footprint for the 1N4148 diodes and the resistors so that they can also work with SMD components
2. Removed the pin header under the SSD1306 screen
3. Rerouted a few traces to move them away from the edge
4. Replaced the JST connectors under the space bar with standard 2.54mm pitch pin headers

Frame changes:

1. Replaced the 3D printed standoffs with standard M2.5 standoffs
2. Removed the spacer between switch plate and the PCB. The plate is now held in place entirely by the switches.
3. Increased the spacing between the PCB and the bottom plate by 1mm

V1 Hardware Design

Initial version.