Skip to content

zli117/Pico-Keyboard

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

51 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Pico-Keyboard

A hot-swappable mechanical keyboard built from scratch with Pi Pico board, and 3D printed case, with a very configurable firmware. The firmware is in a separate repo: https://github.com/zli117/PicoMK and can be reused for other RP2040 keyboards.

Pictures

Top View Side View

PCB

PCB

Case

Plate Bottom

Build Pictures

PCB Solder Bottom View

Overall Cost Breakdown

In total per keyboard material cost is roughly $129.57

  • 5 PCB from JLCPCB with shipping: $39.52. Roughly $7.9 per board.
  • 100 hot-swappable PCB socket: $14.50. Used 68, so total $9.86.
  • Pi Pico: $4.99.
  • EC11 Rotary Encoder: $1.10 each.
  • COM-09032 Joystick: $4.50 each.
  • 100 1N4148 diodes: $4.99. Used 70 so $3.50.
  • 150 WS2812B: $14.49. Used 17, so total $1.64.
  • 3D printed case. Each part weight about 50g and there are 5 (2 for plate, and 3 for bottom). Total weight 250g roughly $6.
  • SSD1306 white color: $3 each.
  • GMMK encoder knob: $10.
  • Clear joystick knob: $5.
  • Stabilizers: $16.99 per set.
  • Akko clear translucent keycap: $39.99.
  • Akko blue switch: $9.99 per 45. Used 68, so total $15.10

Build Instructions

PCB

PCB is designed with KiCAD 6, and everything is under the PCB folder. Pre-plotted files that can be uploaded to board factory are in Gerber.zip file. However, different factory may have different plotting settings, so it's recommended to replot with KiCad following factory's instruction. The provided one is for JLCPCB.

Case

Case is designed with Fusion 360. The file ends in .f3z contains the original Fusion 360 source. My build used SUNLU Clear PLA and is sliced with Cura. I put screw holes on the bottom to secure the PCB, but in practice it's not necessary to screw down the PCB once you've installed switches. So those are optional. The screws between plate and bottom are not optional however.

Firmware

Firmware is in a separate repo: PicoMK. Please see the instruction on how to configure and build the firmware there.

PCB Library Licenses

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

CC BY-SA 4.0