Vestax Vci 100Mkii

Vestax VCI-100MKII

Vestax went out of business in 2014.

• Product page in archive.org
• ASIO driver for Windows in serato.com
• Forum thread

Mapping for Mixxx 2.1

[Functions] in brackets are executed if a shift button of the deck is pressed. {Functions} in braces are executed if a shift button of the other deck is pressed. Changes after the previous version are in bold.

1. Unfocus EffectSlot of the EffectUnit [Select EffectUnit1/2]
2. Focus next EffectSlot of the EffectUnit [Select EffectUnit3/4]
3. Meta knob of the EffectSlot1, or if EffectSlotN is focused Parameter1 of it [Set the link to meta knob][1]
4. Meta knob of the EffectSlot2, or if EffectSlotN is focused Parameter2 of it [Set the link to meta knob]
5. Meta knob of the EffectSlot3, or if EffectSlotN is focused Parameter3 of it [Set the link to meta knob]
6. Super knob, or if EffectSlotN is focused Parameter4 of it [Set the link to meta knob], or if enabled by #33 Wet/dry mix of the EffectUnit
7. EQ high
8. EQ mid
9. EQ low
10. Pitch (up and down to 3 semitones continuously, or in keylock mode discretely)
11. Filter (super knob of Quick Effect)
12. Gain
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch [Brake (if released before full stop, playback resumes)]
20. Jog (locked in slip mode)
21. Play [Reverse]
22. Cue [Cue and Play]
23. Activate [Clear] hotcue1
24. Activate [Clear] hotcue2
25. Sync mode [Adjust beatgrid to the current playposition]
26. Keylock mode [Quantize mode]
27. Loop by default loop size[2] [Reloop], or in loop Exit the loop [Set loop out position]
28. Halve default loop size [Jump backward], or in loop Halve the loop [Jump it backward] {Halve jump size[3] of the other deck}
29. Double default loop size [Jump forward], or in loop Double the loop [Jump it forward] {Double jump size of the other deck}
30. Enable [Set next effect to] EffectSlot1 of the EffectUnit
31. Enable [Set next effect to] EffectSlot2 of the EffectUnit
32. Enable [Set next effect to] EffectSlot3 of the EffectUnit
33. Enable #6 to control wet/dry mix of [Set next effect chain to] the EffectUnit
34. Slip mode (affect scratch, brake, pause, reverse, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3] for the channel
37. Enable EffectUnit2 [EffectUnit4] for the channel
38. Up: previous item and scroll, Down: next item and scroll, Left: previous pane [load to left], Right: next pane [load to right], Push: choose item
39. Channel select

Mapping for Mixxx 2.0

[Functions] in brackets are executed if a shift button of the deck is pressed.

1. Set previous effect chain to the EffectUnit [Select EffectUnit1/2]
2. Set next effect chain to the EffectUnit [Select EffectUnit3/4]
3. Parameter1 of Effect1 of the EffectUnit
4. Parameter2 of Effect1 of the EffectUnit
5. Parameter3 of Effect1 of the EffectUnit
6. Wet/dry mix of the EffectUnit
7. EQ high
8. EQ mid
9. EQ low
10. Gain
11. Filter (high pass only)[4]
12. Pitch (semitones only)
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch
20. Jog (locked in slip mode)
21. Play [Adjust beatgrid to the current playposition]
22. Cue [Adjust beatgrid to match another playing deck]
23. Cue and Play [Move beatgrid earlier]
24. Sync mode [Move beatgrid later]
25. Quantize mode [Zoom in waveform]
26. Keylock mode [Zoom out waveform]
27. Loop by default loop size[5] [Reloop], or in loop Exit the loop [Set loop out position]
28. Halve default loop size, or in loop Halve the loop [Move the loop backward by 1/2 beat]
29. Double default loop size, or in loop Double the loop [Move the loop forward by 1/2 beat]
30. Activate [Clear] hotcue1
31. Activate [Clear] hotcue2
32. Activate [Clear] hotcue3
33. Activate [Clear] hotcue4
34. Slip mode (affect scratch, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3] for the channel
37. Enable EffectUnit2 [EffectUnit4] for the channel
38. Up: previous track and scroll, Down: next track and scroll, Left: load to left, Right: load to right, Push: load to first stopped
39. Channel select

1. left-right inverse -> right inverse -> left inverse -> full inverse -> none -> full -> left -> right -> left-right

2. size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29

3. size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29

4. see the article or use Controller Wizard (choose "Quick Effect Super Knob") for low-high pass

5. size < 1/4: LED28 & 29; 1/4 ≤ size < 4: LED28; 4 < size ≤ 64: LED29; 64 < size: LED28 & 29