Jbsystems Dj Kontrol 3

JB Systems dj-kontrol 3

• Manufacturer's product page
• Forum thread (Mapping Download)

This DJ controller includes a 2 channel sound card with balanced XLR outputs (+ unbalanced RCA) and a microphone input. This controller works with USB cable connected only, but for better stability, it's recommend to use the external 5V 1A Poweradapter as well.

Usage

Download the Mapping .zip file from the Forum Thread (above), unzip it and copy the two files (.js / .xml) to your Mixxx controllers folder.

• Linux: ~/.mixxx/controllers
• Windows: %USERPROFILE%\Local Settings\Application Data\Mixxx\controllers
• Mac OS X: ~/Library/Application Support/Mixxx/controllers

Start Mixxx

• On some Linux systems, Pulseaudio blocks the driver for Mixxx, so you have to start Mixxx via Terminal with:
• pasuspender mixxx

In Mixxx goto:

1. Options->Preferences->Sound Hardware:

• Sound API: ALSA
• Sample Rate: 48000Hz
• Output / Master / JB Systems DJ-Kontrol 3: USB Audio / Channels 3 - 4
• Output / Headphones / JB Systems DJ-Kontrol 3: USB Audio / Channels 1 - 2

1. Options->Preferences->Controllers:

• check: Enabled
• Load Preset for this controller

Now the controller should work with Mixxx!

Mapping

1. Select Knop
2. Load to Deck 1
3. Load to Deck 2
4. Back
5. Deck Gain
6. EQ High
7. EQ Mid
8. EQ Low
9. Deck Volume Fader
10. Mic Volume
11. Mic Input
12. Crossfader
13. Crossfader Curve Select
14. CUE Mix
15. CUE Volume
16. Headphones Output
17. CUE Pre-fader listening (Pfl) Deck 1
18. CUE Pre-fader listening (Pfl) Deck 2
19. Master (Output) Volume
20. Set Cue
21. Cue
22. Play/Pause
23. Jogwheel
24. Scratch
25. SYNC
26. Loop In
27. Loop Out (Exit)
28. Reloop
29. 2-Beat Loop
30. 4-Beat Loop
31. 8-Beat Loop
32. Halve Loop
33. Double Loop
34. Pitch range
35. Speed-/Pitch Fader
36. Pitch Bend +/-
37. Hot-Cue, delete on shift mode
38. Shift Mode
39. Needle Drop Sensor
40. Key
41. Effect on/off
42. Effect select
43. Effect Parameter 1
44. Effect Parameter 2
45. USB Port
46. RCA unbalanced output
47. XLR balanced output
48. Switch between XLR/RCA
49. external Power-plug port

---

Jogwheel functions

• Scratch Mode On: touched on top scratch
• Scratch Mode On: touched on side pitchbend
• Scratch Mode Off: always pitchbend
• Shift Mode On: Loop Move

Special features

• Parameter 1 Knob is mapped to dry/wet
• Parameter 1 Shift Knob (Filter) is mapped as Super Knob
• Parameter 2 Knob is mapped to the first setting of the selected effect
• Pitch Fader are inverted (up = + , down = -)
• Shift Btn is mapped as toggle (press to activate, press again to deactivate)

not working (yet)

• Xfader Curve Btn
• Pitch Lock Btn
• S.Start Btn
• Zoom Push Btn
• Reverse Btn
• Jogwheel Led Animations