mikroSDK v2.7.0 released
·
201 commits
to master
since this release
v2.7.0
- released: 2022-12-01
2.7.0
Changes
AVR
AVR MCUs supported!
MCU | MCU | MCU |
---|---|---|
AT90USB1286 | AT90USB1287 | AT90USB646 |
AT90USB647 | ATmega128 | ATmega1280 |
ATmega1281 | ATmega1284 | ATmega1284P |
ATmega128A | ATmega16 | ATmega164A |
ATmega164P | ATmega164PA | ATmega168 |
ATmega168A | ATmega168P | ATmega168PA |
ATmega168PB | ATmega16A | ATmega16U4 |
ATmega2560 | ATmega2561 | ATmega32 |
ATmega324A | ATmega324P | ATmega324PA |
ATmega324PB | ATmega328 | ATmega32A |
ATmega32U4 | ATmega64 | ATmega640 |
ATmega644 | ATmega644A | ATmega644P |
ATmega644PA | ATmega64A | ATxmega128A1U |
ATxmega128A3 | ATxmega128A3U | ATxmega128A4U |
ATxmega128B1 | ATxmega128B3 | ATxmega128D3 |
ATxmega128D4 | ATxmega16A4 | ATxmega16A4U |
ATxmega16D4 | ATxmega16E5 | ATxmega192A3 |
ATxmega192A3U | ATxmega192D3 | ATxmega256A3 |
ATxmega256A3B | ATxmega256A3BU | ATxmega256A3U |
ATxmega256D3 | ATxmega32A4 | ATxmega32A4U |
ATxmega32D3 | ATxmega32D4 | ATxmega32E5 |
ATxmega384D3 | ATxmega64A1U | ATxmega64A3 |
ATxmega64A3U | ATxmega64A4U | ATxmega64B1 |
ATxmega64B3 | ATxmega64D3 | ATxmega64D4 |
ATmega328PB | ATmega169A | ATmega169P |
ATmega169PA | ATmega325 | ATmega3250 |
ATmega3250A | ATmega3250P | ATmega3250PA |
ATmega325A | ATmega325P | ATmega325PA |
ATmega329 | ATmega3290 | ATmega3290A |
ATmega3290P | ATmega329A | ATmega329P |
ATmega329PA | ATmega645 | ATmega6450 |
ATmega6450A | ATmega6450P | ATmega645A |
ATmega645P | ATmega649 | ATmega6490 |
ATmega6490A | ATmega6490P | ATmega649A |
ATmega649P |
Supported modules:
- NEW Software I2C implemention for AVR MCUs
- ADC (Full module support)
- SPI (Full module support)
- UART (Full module support)
- I2C (Full module support)
- PWM (Full module support)
- GPIO (Full module support)
Files added:
- assembly.h
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- CMakeLists.txt
- common_macros.h
- hal_ll_adc.c
- hal_ll_adc.c
- hal_ll_adc.h
- hal_ll_analog_in_map.h
- hal_ll_bit_control.h
- hal_ll_core.c
- hal_ll_core.h
- hal_ll_core_defines.h
- hal_ll_core_port.h
- hal_ll_gpio.c
- hal_ll_gpio.h
- hal_ll_gpio_constants.h
- hal_ll_gpio_port.c
- hal_ll_gpio_port.h
- hal_ll_i2c_master.c
- hal_ll_i2c_master.c
- hal_ll_i2c_master.c
- hal_ll_i2c_master.h
- hal_ll_i2c_pin_map.h
- hal_ll_one_wire.c
- hal_ll_one_wire.h
- hal_ll_pin_names.h
- hal_ll_spi_master.c
- hal_ll_spi_master.c
- hal_ll_spi_master.h
- hal_ll_spi_master_pin_map.h
- hal_ll_target.h
- hal_ll_target_names.h
- hal_ll_tim.c
- hal_ll_tim.c
- hal_ll_tim.c
- hal_ll_tim.h
- hal_ll_tim_pin_map.h
- hal_ll_uart.c
- hal_ll_uart.c
- hal_ll_uart.h
- hal_ll_uart_pin_map.h
2.7.0
Improvements
- Improved
Graphic Library
implementation- Improvement for issue of bad conversion for special case
- Added check if result is
+Inf
, or-Inf
since cast to integer is undefined - Added
max
andmin
int instead
- Added option to disable/enable whole module based on availability
2.7.0
Fixes
- Fixed VTFT imlplementation for
PIC18F57Q43
- API now returns adequate active instance for further use
- Fixed
I2C
implementation 2 for PIC 8bit devices- Restart signal is now generated adequatelly
- Fix impacts following devices:
PIC18F25K42
PIC18F26K42
PIC18F27K42
PIC18F45K42
PIC18F46K42
PIC18F47K42
PIC18F55K42
PIC18F56K42
PIC18F57K42
PIC18LF25K42
PIC18LF26K42
PIC18LF27K42
PIC18LF45K42
PIC18LF46K42
PIC18LF47K42
PIC18LF55K42
PIC18LF56K42
PIC18LF57K42
PIC18F57Q43
- Fixed
GPIO
implementation forRISC-V
devices- Unlock routine fixed for SWJ pins
- User is now available to use SWJ pins
- Affects all
GIGADEVICE
MCUs
- Fixed TFT port setting for:
MCU CARD 11 FOR PIC
- Set to adequate 8bit port
- Fixed inclusion of adequate
mcu_definitions
header file for following MCUs:STM32L100C6_AUx
STM32L100R8_ATx
STM32L100RB_ATx
STM32L151C6_ATx
STM32L151C6_AUx
STM32L151C8_ATx
STM32L151C8_AUx
STM32L151CB_ATx
STM32L151CB_AUx
STM32L151R6_AHx
STM32L151R6_ATx
STM32L151R8_AHx
STM32L151R8_ATx
STM32L151RB_AHx
STM32L151RB_ATx
STM32L151RC_ATx
STM32L151V8_AHx
STM32L151V8_ATx
STM32L151VB_AHx
STM32L151VB_ATx
STM32L151VC_ATx
STM32L152C6_ATx
STM32L152C6_AUx
STM32L152C8_ATx
STM32L152C8_AUx
STM32L152CB_ATx
STM32L152CB_AUx
STM32L152R6_AHx
STM32L152R6_ATx
STM32L152R8_AHx
STM32L152R8_ATx
STM32L152RB_AHx
STM32L152RB_ATx
STM32L152RC_ATx
STM32L152V8_AHx
STM32L152V8_ATx
STM32L152VB_AHx
STM32L152VB_ATx
STM32L152VC_ATx
STM32L162RC_ATx
STM32L162VC_ATx
2.7.0
NEW HARDWARE
Support added for following hardware:
2.7.0
PLANET DEBUG
- Incoming update with newly released AVR boards
2.7.0
Collaborators
We would like to thank the following people for contributing:
- @Valentin Hubert
- Software I2C full implementation for AVR