Support for the Pico

_Boards/RaspberryPi/Pico/MFBoards.h

@@ -0,0 +1,57 @@
+#ifndef MFBoardMicro_h
+#define MFBoardMicro_h
+
+#ifndef MF_SEGMENT_SUPPORT
+#define MF_SEGMENT_SUPPORT 1
+#endif
+#ifndef MF_LCD_SUPPORT
+#define MF_LCD_SUPPORT 1
+#endif
+#ifndef MF_STEPPER_SUPPORT
+#define MF_STEPPER_SUPPORT 1
+#endif
+#ifndef MF_SERVO_SUPPORT
+#define MF_SERVO_SUPPORT 1
+#endif
+#ifndef MF_ANALOG_SUPPORT
+#define MF_ANALOG_SUPPORT 1
+#endif
+#ifndef MF_OUTPUT_SHIFTER_SUPPORT
+#define MF_OUTPUT_SHIFTER_SUPPORT 1
+#endif
+#ifndef MF_INPUT_SHIFTER_SUPPORT
+#define MF_INPUT_SHIFTER_SUPPORT 1
+#endif
+#ifndef MF_MUX_SUPPORT
+#define MF_MUX_SUPPORT 1
+#endif
+#ifndef MF_DIGIN_MUX_SUPPORT
+#define MF_MUX_SUPPORT       1
+#define MF_DIGIN_MUX_SUPPORT 1
+#endif
+
+#define MAX_OUTPUTS         26
+#define MAX_BUTTONS         26
+#define MAX_LEDSEGMENTS     4
+#define MAX_ENCODERS        8
+#define MAX_STEPPERS        6
+#define MAX_MFSERVOS        8
+#define MAX_MFLCD_I2C       2
+#define MAX_ANALOG_INPUTS   3
+#define MAX_OUTPUT_SHIFTERS 4
+#define MAX_INPUT_SHIFTERS  4
+#define MAX_DIGIN_MUX       4
+
+#define STEPS               64
+#define STEPPER_SPEED       400     // 300 already worked, 467, too?
+#define STEPPER_ACCEL       800
+
+#define MOBIFLIGHT_TYPE         "MobiFlight RaspiPico"
+#define MOBIFLIGHT_SERIAL       "0987654321"
+#define MOBIFLIGHT_NAME         "MobiFlight RaspiPico"
+#define EEPROM_SIZE             4096    // EEPROMSizeRaspberryPico
+#define MEMLEN_CONFIG           1496    // MUST be less than EEPROM_SIZE!! MEM_OFFSET_CONFIG + MEM_LEN_CONFIG <= EEPROM_SIZE, see: eeprom_write_block (MEM_OFFSET_CONFIG, configBuffer, MEM_LEN_CONFIG);
+#define MEMLEN_NAMES_BUFFER     1000    // max. size for configBuffer, contains only names from inputs
+#define MF_MAX_DEVICEMEM        2000    // max. memory size for devices
+
+#endif

platformio.ini

@@ -19,11 +19,13 @@
 ; Common build settings across all devices
 [env]
 lib_deps = 
-	arduino-libraries/Servo @ 1.1.8
 	https://github.com/MobiFlight/LedControl#1.1.0
 	waspinator/AccelStepper @ 1.61
 	https://github.com/MobiFlight/LiquidCrystal_I2C#v1.1.4
 	https://github.com/MobiFlight/Arduino-CmdMessenger#4.2.1
+	ricaun/ArduinoUniqueID @ ^1.3.0
+lib_deps_Atmel =
+	arduino-libraries/Servo @ 1.1.8
 build_flags =
 	-DMF_REDUCE_FUNCT_LEDCONTROL
 	-DMAXCALLBACKS=30
@@ -61,7 +63,8 @@ build_src_filter =
 	${env.build_src_filter}
 	+<../_Boards/Atmel>
 lib_deps = 
-	${env.lib_deps}	
+	${env.lib_deps}
+	${env.lib_deps_Atmel}
 monitor_speed = 115200
 extra_scripts = 
 	${env.extra_scripts}
@@ -78,7 +81,8 @@ build_src_filter =
 	${env.build_src_filter}
 	+<../_Boards/Atmel>
 lib_deps = 
-	${env.lib_deps}	
+	${env.lib_deps}
+	${env.lib_deps_Atmel}
 monitor_speed = 115200
 extra_scripts = 
 	${env.extra_scripts}
@@ -96,7 +100,8 @@ build_src_filter =
 	${env.build_src_filter}
 	+<../_Boards/Atmel>
 lib_deps = 
-	${env.lib_deps}	
+	${env.lib_deps}
+	${env.lib_deps_Atmel}
 monitor_speed = 115200
 extra_scripts = 
 	${env.extra_scripts}
@@ -112,7 +117,32 @@ build_flags =
 build_src_filter = 
 	${env.build_src_filter}
 	+<../_Boards/Atmel>
-lib_deps = 
+lib_deps =
+	${env.lib_deps}
+	${env.lib_deps_Atmel}
+monitor_speed = 115200
+extra_scripts = 
+	${env.extra_scripts}
+
+; Build settings for the Raspberry Pico original
+[env:raspberrypico]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git
+board = pico
+framework = arduino
+board_build.core = earlephilhower			; select new core
+board_build.filesystem_size = 0M			; configure filesystem size. Default 0 Mbyte.
+lib_ldf_mode = chain+
+upload_protocol = mbed						; for debugging upoading can be changed to picoprobe
+;debug_tool = picoprobe						; and uncomment this for debugging w/ picoprobe
+build_flags =
+	${env.build_flags}
+	-DUSE_INTERRUPT
+	-I./_Boards/RaspberryPi/Pico
+	-fpermissive
+build_src_filter =
+	${env.build_src_filter}
+	+<../_Boards/RaspberryPi>
+lib_deps =
 	${env.lib_deps}
 monitor_speed = 115200
 extra_scripts = 

src/Config.cpp

@@ -6,11 +6,10 @@
 
 #include "mobiflight.h"
 #include "MFEEPROM.h"
-
 #include "Button.h"
 #include "Encoder.h"
 #include "Output.h"
-
+#include "ArduinoUniqueID.h"
 #if MF_ANALOG_SUPPORT == 1
 #include "Analog.h"
 #endif
@@ -54,8 +53,15 @@ const uint8_t MEM_LEN_NAME      = 48;
 const uint8_t MEM_OFFSET_SERIAL = MEM_OFFSET_NAME + MEM_LEN_NAME;
 const uint8_t MEM_LEN_SERIAL    = 11;
 const uint8_t MEM_OFFSET_CONFIG = MEM_OFFSET_NAME + MEM_LEN_NAME + MEM_LEN_SERIAL;
-
+#if defined(ARDUINO_ARCH_AVR)
 char      serial[MEM_LEN_SERIAL]     = MOBIFLIGHT_SERIAL;
+#elif defined(ARDUINO_ARCH_RP2040)
+// Pico has a unique 64-bit device identifier which is retrieved from the external NOR flash device at boot.
+// These 8 bytes are transferred to characters, so 16 bytes are required
+// Additionally 3 bytes for "SN-" and one byte for the NULL terminator is required
+// On first start up only "SN" is written to the EEPROM to check first start up of the firmware
+char      serial[PICO_UNIQUE_BOARD_ID_SIZE_BYTES * 2 + 1 + 3]     = MOBIFLIGHT_SERIAL;
+#endif
 char      name[MEM_LEN_NAME]         = MOBIFLIGHT_NAME;
 const int MEM_LEN_CONFIG             = MEMLEN_CONFIG;
 char      nameBuffer[MEM_LEN_CONFIG] = "";
@@ -437,15 +443,42 @@ bool getStatusConfig()
 // ************************************************************
 void generateSerial(bool force)
 {
-    MFeeprom.read_block(MEM_OFFSET_SERIAL, serial, MEM_LEN_SERIAL);
-    if (!force && serial[0] == 'S' && serial[1] == 'N')
+    if (force) {
+#if defined(ARDUINO_ARCH_AVR)
+        // A serial number is forced to generated from the user
+        // It is very likely that the reason is a double serial number as the UniqueID for AVR's must not be Unique
+        // so generate one acc. the old style and use millis() for seed
+        randomSeed(millis());
+        sprintf(serial, "SN-%03x-", (unsigned int)random(4095));
+        sprintf(&serial[7], "%03x", (unsigned int)random(4095));
+        MFeeprom.write_block(MEM_OFFSET_SERIAL, serial, MEM_LEN_SERIAL);
+#endif
         return;
-    randomSeed(analogRead(RANDOM_SEED_INPUT));
-    sprintf(serial, "SN-%03x-", (unsigned int)random(4095));
-    sprintf(&serial[7], "%03x", (unsigned int)random(4095));
-    MFeeprom.write_block(MEM_OFFSET_SERIAL, serial, MEM_LEN_SERIAL);
-    if (!force) {
-        MFeeprom.write_byte(MEM_OFFSET_CONFIG, 0x00); // First byte of config to 0x00 to ensure to start 1st time with empty config, but not if forced from the connector to generate a new one
+    }
+
+    if (MFeeprom.read_byte(MEM_OFFSET_SERIAL) == 'S' && MFeeprom.read_byte(MEM_OFFSET_SERIAL + 1) == 'N') {
+        // A serial number according old style is already generated and saved to the eeprom
+        // So keep it to avoid a connector message with orphaned board
+        MFeeprom.read_block(MEM_OFFSET_SERIAL, serial, MEM_LEN_SERIAL);
+        return;
+    }
+
+    // Read the uniqueID and use it as serial numnber
+    sprintf(serial, "SN-");
+    for (size_t i = 0; i < UniqueIDsize; i++) {
+        if (UniqueID[i] < 0x10) {
+            sprintf(&serial[3 + i * 2], "0%X", UniqueID[i]);
+        } else {
+            sprintf(&serial[3 + i * 2], "%X", UniqueID[i]);
+        }
+    }
+
+    if (MFeeprom.read_byte(MEM_OFFSET_SERIAL) != 'I' && MFeeprom.read_byte(MEM_OFFSET_SERIAL + 1) != 'D') {
+        // Coming here it's the first start up of the board and no serial number or UniqueID is available
+        // mark this in the eeprom that a UniqueID is used on first start up
+        MFeeprom.write_block(MEM_OFFSET_SERIAL, "ID", 2);
+        // Set first byte of config to 0x00 to ensure with empty config on 1st start up
+        MFeeprom.write_byte(MEM_OFFSET_CONFIG, 0x00);
     }
 }
 

src/MF_Modules/MFEEPROM.cpp

@@ -6,11 +6,15 @@
 
 #include <Arduino.h>
 #include "MFEEPROM.h"
+#include "MFBoards.h"
 
 MFEEPROM::MFEEPROM() {}
 
 void MFEEPROM::init(void)
 {
+#if defined(ARDUINO_ARCH_RP2040)
+    EEPROM.begin(EEPROM_SIZE);
+#endif
     _eepromLength = EEPROM.length();
 }
 
@@ -29,6 +33,9 @@ bool MFEEPROM::write_byte(uint16_t adr, const uint8_t data)
 {
     if (adr >= _eepromLength) return false;
     EEPROM.write(adr, data);
+#if defined(ARDUINO_ARCH_RP2040)
+    EEPROM.commit();
+#endif
     return true;
 }
 

src/MF_Modules/MFEEPROM.h

@@ -44,6 +44,9 @@ class MFEEPROM
     {
         if (adr + sizeof(T) > _eepromLength) return false;
         EEPROM.put(adr, t);
+#if defined(ARDUINO_ARCH_RP2040)
+        EEPROM.commit();
+#endif
         return true;
     }
 
@@ -54,6 +57,9 @@ class MFEEPROM
         for (uint16_t i = 0; i < len; i++) {
             EEPROM.put(adr + i, t[i]);
         }
+#if defined(ARDUINO_ARCH_RP2040)
+        EEPROM.commit();
+#endif
         return true;
     }
 };

src/MF_Servo/MFServo.cpp

@@ -12,7 +12,11 @@ void MFServo::moveTo(int absolute)
     if (_targetPos != newValue) {
         _targetPos = newValue;
         if (!_initialized) {
+#if defined(ARDUINO_ARCH_RP2040)
+            _servo.attach(_pin, 544, 2400);
+#else
             _servo.attach(_pin);
+#endif
             _initialized = true;
         }
     }

src/allocateMem.cpp

@@ -6,10 +6,19 @@
 
 #include "mobiflight.h"
 
-char     deviceBuffer[MF_MAX_DEVICEMEM] = {0};
+#if defined (ARDUINO_ARCH_AVR)
+uint8_t     deviceBuffer[MF_MAX_DEVICEMEM] = {0};
+#else
+std::size_t    deviceBuffer[MF_MAX_DEVICEMEM] = {0};
+#endif
+
 uint16_t nextPointer                    = 0;
 
-char    *allocateMemory(uint8_t size)
+#if defined (ARDUINO_ARCH_AVR)
+uint8_t     *allocateMemory(uint8_t size)
+#else
+std::size_t    *allocateMemory(uint8_t size)
+#endif
 {
     uint16_t actualPointer = nextPointer;
     nextPointer            = actualPointer + size;

src/allocateMem.h

@@ -8,9 +8,12 @@
 
 #include <new>
 
-extern char deviceBuffer[];
+#if defined (ARDUINO_ARCH_AVR)
+uint8_t     *allocateMemory(uint8_t size);
+#else
+std::size_t    *allocateMemory(uint8_t size);
+#endif
 
-char       *allocateMemory(uint8_t size);
 void        ClearMemory();
 uint16_t    GetAvailableMemory();
 bool        FitInMemory(uint8_t size);