Open OCD and STM32 Board Usage

In order to deploy and debug code on STM32 boards (correctly), ensure that you are observing the following guidelines:

Look at the README for OpenOCD support

This README is located under <repo root>\Zelig\tools\openocd

Download and install ST-Link v2 Utility and drivers

This can be found here: http://www.st.com/web/en/catalog/tools/PF258168

Download and install OpenOCD for windows

Links can be found here: http://openocd.org/getting-openocd/ Place the contents of the compressed file into this directory <repo root>\Zelig\tools\openocd and into <SDK drop>\tools\openocd if your SDK is already installed

Uninstall and re-install the SDK extension

In Visual Studio, go to Tools->Extensions and Updates and uninstall the Llilum SDK VSIX, then follow the installation steps in https://github.com/NETMF/llilum/wiki/SDK-User-Guide

Set up the appropriate configurations in the SDK project

• In Program.cs, uncomment the appropriate "#define" for the board you are using
• Right click on the Native project, and go to properties
• In the Debugging tab, ensure that GDB Server is set to OpenOCD and Deploy Tool is ST-Link v2 Utility
• Verify that the STLink-Utility Path is correct
• In the Llilum Configuration tab, ensure that the correct board is selected