Skip to content

Slurm Issues

Jump to bottom
rexcsn edited this page Oct 16, 2020 · 1 revision

Slurm will not mark non responsive node as down, if node is within ResumeTimeout

Issue description

Issue was first reported in issue #2117 and applicable to pcluster running on new slurm scaling architecture, aws-parallelcluster>=2.9.0 and scheduler==slurm.

The issue is slurm will not mark non-responsive nodes as down within ResumeTimeout of node power up. Slurm will requeue jobs automatically if a node running the job is down. As a result, this issue might also result in long requeue time for jobs that have non-responsive nodes.

ParallelCluster current sets ResumeTimeout to 3600 seconds, so in practice customer may need to wait ~1 hr for slurm to place a newly launched, non-responsive node into down.

The issue can be reproduced by powering up a node and making node non-responsive within ~1 hr of launch time by killing slurmd on compute or stopping the backing instance.

Not applicable

This issue is not applicable to the following scenarios, in which ParallelCluster process will actively set problematic nodes to down:

  • Terminated instances
  • Instances with scheduled event
  • Instances with failing instance status check == impaired
  • Instances with failing system status check == impaired
  • Instances failing during bootstrap process. These instances will self-terminate, and fall under terminated instances case.

Root cause

Based on communication with SchedMD, we confirm that this issue is due to designed behavior of slurm.

Currently slurm's logic will not place non-responsive node in down nor mark node as non-responsive with * suffix, if node is within ResumeTimeout of the node's power_up time.

After ResumeTimeout expires, normal logic regarding non-responsive nodes will take place, and SlurmdTimeout will solely control how long slurm will wait before marking non-responsive nodes as down.

In general, ParallelCluster's current integration with slurm was designed to mostly rely on scheduler to provide health check regrading the operating status of nodes. As a result, users might experience this slurm health check issue directly in cluster operation.

Mitigation

Since the issue is dependent on ResumeTimeout, the issue can be mitigated if users modify ResumeTimeout to be a shorter time.

From the official documentation of ResumeTimeout:

Maximum time permitted (in seconds) between when a node resume request is issued and when the node is actually available for use

ParallelCluster current sets ResumeTimeout to 3600 seconds because different customer might have different bootstrap time, and we do not want to impose a low limit on the maximum time permitted for a node to join the cluster.

However, users can tune ResumeTimeout to the specific time it take for their compute instances to complete bootstrapping and join the cluster.

Please follow the below instructions to modify ResumeTimeout:

  1. Stop cluster by executing pcluster stop <cluster name>
  2. ssh into Head node with pcluster ssh <cluster name>.
  3. Manually set ResumeTimeout to chosen time by modify /opt/slurm/etc/slurm.conf in Head node.
  4. Restart slurmctld by executing sudo systemctl restart slurmctld or sudo service slurmctld restart, depending on your OS
  5. Verify that new ResumeTimeout is set in slurm by executing scontrol show config | grep "ResumeTimeout"
  6. Start cluster by executing pcluster start <cluster name>

Here are some things to consider when tuning ResumeTimeout:

  • This is the max time allowed between a node being powered up and a compute instance joining the cluster by starting slurmd. If slurmd is not started on a compute instance by ResumeTimeout the node will be marked as down
  • This time will need to be longer than the compute instance bootstrap time
  • This time will need to be longer, if user has limits applicable to RunInstances that delays launch of instances on a large scale
  • It's always better to start with a longer ResumeTimeout to prevent issues and lower to follow the actual time it takes for compute to join cluster for a particular setup
  • As a general starting point, ResumeTimeout=1200, i.e. 20 mins, should be a safe timeout for most cluster setups

Next steps

We have communicated with SchedMD why we think this behavior is undesirable and inconsistent with the documentation on ResumeTimeout and SlurmdTimeout. We will try to continually push for a change regarding this behavior.

Clone this wiki locally