Skip to content

Commit

Permalink
Merge opendbc subtree
Browse files Browse the repository at this point in the history
  • Loading branch information
Vehicle Researcher committed Nov 17, 2018
2 parents 3b744f4 + 2f0b0fb commit 3e78efa
Show file tree
Hide file tree
Showing 37 changed files with 1,645 additions and 306 deletions.
2 changes: 1 addition & 1 deletion opendbc/acura_ilx_2016_can_generated.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -293,7 +293,7 @@ CM_ SG_ 780 CRUISE_SPEED "255 = no speed";
CM_ SG_ 804 CRUISE_SPEED_PCM "255 = no speed";
CM_ SG_ 829 BEEP "beeps are pleasant, chimes are for warnngs etc...";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 419 GEAR_SHIFTER 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
VAL_ 422 LIGHTS_SETTING 3 "high_beam" 2 "low_beam" 1 "position" 0 "no_lights" ;
Expand Down
1 change: 1 addition & 0 deletions opendbc/acura_rdx_2018_can_generated.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -288,6 +288,7 @@ BO_ 660 SCM_FEEDBACK: 8 SCM
CM_ SG_ 422 PARKING_BRAKE_LIGHT "Believe this is just the dash light for the parking break";
VAL_ 392 GEAR_SHIFTER 0 "S" 1 "P" 2 "R" 4 "N" 8 "D" ;
VAL_ 392 GEAR 26 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;

CM_ "CHFFR_METRIC 342 STEER_ANGLE STEER_ANGLE 0.36 180; CHFFR_METRIC 380 ENGINE_RPM ENGINE_RPM 1 0; CHFFR_METRIC 804 ENGINE_TEMPERATURE ENGINE_TEMPERATURE 1 0";
2 changes: 2 additions & 0 deletions opendbc/generator/honda/_bosch_2018.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -259,3 +259,5 @@ BO_ 891 STALK_STATUS_2: 8 XXX
SG_ PARK_LIGHTS : 36|1@0+ (1,0) [0|1] "" XXX
SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON
SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON

VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
2 changes: 1 addition & 1 deletion opendbc/generator/honda/acura_ilx_2016_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -64,7 +64,7 @@ CM_ SG_ 780 CRUISE_SPEED "255 = no speed";
CM_ SG_ 804 CRUISE_SPEED_PCM "255 = no speed";
CM_ SG_ 829 BEEP "beeps are pleasant, chimes are for warnngs etc...";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 419 GEAR_SHIFTER 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
VAL_ 422 LIGHTS_SETTING 3 "high_beam" 2 "low_beam" 1 "position" 0 "no_lights" ;
Expand Down
1 change: 1 addition & 0 deletions opendbc/generator/honda/acura_rdx_2018_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -59,6 +59,7 @@ BO_ 660 SCM_FEEDBACK: 8 SCM
CM_ SG_ 422 PARKING_BRAKE_LIGHT "Believe this is just the dash light for the parking break";
VAL_ 392 GEAR_SHIFTER 0 "S" 1 "P" 2 "R" 4 "N" 8 "D" ;
VAL_ 392 GEAR 26 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;

CM_ "CHFFR_METRIC 342 STEER_ANGLE STEER_ANGLE 0.36 180; CHFFR_METRIC 380 ENGINE_RPM ENGINE_RPM 1 0; CHFFR_METRIC 804 ENGINE_TEMPERATURE ENGINE_TEMPERATURE 1 0";
2 changes: 1 addition & 1 deletion opendbc/generator/honda/honda_civic_touring_2016_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -129,7 +129,7 @@ CM_ SG_ 420 BRAKE_HOLD_RELATED "On when Brake Hold engaged";
CM_ SG_ 450 EPB_STATE "3 \"engaged\" 2 \"disengaging\" 1 \"engaging\" 0 \"disengaged\"";
CM_ SG_ 806 REVERSE_LIGHT "Might be reverse gear selected and not the lights";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 401 GEAR_SHIFTER 32 "L" 16 "S" 8 "D" 4 "N" 2 "R" 1 "P" ;
VAL_ 401 GEAR 7 "L" 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 450 EPB_STATE 3 "engaged" 2 "disengaging" 1 "engaging" 0 "disengaged" ;
Expand Down
2 changes: 1 addition & 1 deletion opendbc/generator/honda/honda_crv_touring_2016_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -64,7 +64,7 @@ BO_ 891 WIPERS: 8 XXX

CM_ SG_ 401 GEAR "10 = reverse, 11 = transition";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 401 GEAR_SHIFTER 32 "L" 16 "S" 8 "D" 4 "N" 2 "R" 1 "P" ;
VAL_ 401 GEAR 7 "L" 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
Expand Down
2 changes: 1 addition & 1 deletion opendbc/generator/honda/honda_fit_ex_2018_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -87,7 +87,7 @@ BO_ 884 STALK_STATUS: 8 XXX
CM_ SG_ 401 GEAR "10 = reverse, 11 = transition";
CM_ SG_ 420 BRAKE_HOLD_RELATED "On when Brake Hold engaged";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 401 GEAR_SHIFTER 32 "L" 16 "S" 8 "D" 4 "N" 2 "R" 1 "P" ;
VAL_ 401 GEAR 7 "L" 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
Expand Down
4 changes: 1 addition & 3 deletions opendbc/generator/honda/honda_odyssey_exl_2018.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -100,7 +100,7 @@ CM_ SG_ 804 CRUISE_SPEED_PCM "255 = no speed";
CM_ SG_ 806 REVERSE_LIGHT "Might be reverse gear selected and not the lights";
CM_ SG_ 829 BEEP "beeps are pleasant, chimes are for warnings etc...";

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 419 GEAR_SHIFTER 10 "S" 4 "D" 3 "N" 2 "R" 1 "P" ;
VAL_ 450 EPB_STATE 3 "engaged" 2 "disengaging" 1 "engaging" 0 "disengaged" ;
VAL_ 662 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
Expand All @@ -110,7 +110,5 @@ VAL_ 829 BEEP 3 "single_beep" 2 "triple_beep" 1 "repeated_beep" 0 "no_beep" ;
VAL_ 891 WIPERS 4 "High" 2 "Low" 0 "Off" ;
VAL_ 927 ACC_ALERTS 29 "esp_active_acc_canceled" 10 "b_pedal_applied" 9 "speed_too_low" 8 "speed_too_high" 7 "p_brake_applied" 6 "gear_no_d" 5 "seatbelt" 4 "too_steep_downhill" 3 "too_steep_uphill" 2 "too_close" 1 "no_vehicle_ahead" ;
VAL_ 806 CMBS_BUTTON 3 "pressed" 0 "released" ;
VAL_ 891 WIPERS 4 "High" 2 "Low" 0 "Off" ;
VAL_ 927 ACC_ALERTS 29 "esp_active_acc_canceled" 10 "b_pedal_applied" 9 "speed_too_low" 8 "speed_too_high" 7 "p_brake_applied" 6 "gear_no_d" 5 "seatbelt" 4 "too_steep_downhill" 3 "too_steep_uphill" 2 "too_close" 1 "no_vehicle_ahead" ;

CM_ "CHFFR_METRIC 342 STEER_ANGLE STEER_ANGLE 0.36 180; CHFFR_METRIC 380 ENGINE_RPM ENGINE_RPM 1 0; CHFFR_METRIC 804 ENGINE_TEMPERATURE ENGINE_TEMPERATURE 1 0";
2 changes: 1 addition & 1 deletion opendbc/generator/honda/honda_pilot_touring_2017_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -58,7 +58,7 @@ BO_ 660 SCM_FEEDBACK: 8 SCM
SG_ LEFT_BLINKER : 5|1@0+ (1,0) [0|1] "" EON
SG_ WIPERS_SPEED : 4|2@0+ (1,0) [0|3] "" EON

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 419 GEAR_SHIFTER 32 "D" 8 "R" 4 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
VAL_ 422 LIGHTS_SETTING 3 "high_beam" 2 "low_beam" 1 "position" 0 "no_lights" ;
Expand Down
2 changes: 1 addition & 1 deletion opendbc/generator/honda/honda_ridgeline_black_edition_2017_can.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -53,7 +53,7 @@ BO_ 660 SCM_FEEDBACK: 8 SCM
SG_ LEFT_BLINKER : 5|1@0+ (1,0) [0|1] "" EON
SG_ WIPERS_SPEED : 4|2@0+ (1,0) [0|3] "" EON

VAL_ 399 STEER_STATUS 5 "fault" 4 "no_torque_alert_2" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
VAL_ 419 GEAR_SHIFTER 32 "D" 8 "R" 4 "P" ;
VAL_ 422 CRUISE_BUTTONS 7 "tbd" 6 "tbd" 5 "tbd" 4 "accel_res" 3 "decel_set" 2 "cancel" 1 "main" 0 "none" ;
VAL_ 422 LIGHTS_SETTING 3 "high_beam" 2 "low_beam" 1 "position" 0 "no_lights" ;
Expand Down
113 changes: 89 additions & 24 deletions opendbc/generator/toyota/_toyota_2017.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -40,6 +40,11 @@ BO_ 36 KINEMATICS: 8 XXX
SG_ YAW_RATE : 1|10@0+ (1,-512) [0|65535] "" XXX
SG_ STEERING_TORQUE : 17|10@0+ (1,-512) [0|65535] "" XXX

BO_ 37 STEER_ANGLE_SENSOR: 8 XXX
SG_ STEER_ANGLE : 3|12@0- (1.5,0) [-500|500] "deg" XXX
SG_ STEER_FRACTION : 39|4@0- (0.1,0) [-0.7|0.7] "deg" XXX
SG_ STEER_RATE : 35|12@0- (1,0) [-2000|2000] "deg/s" XXX

BO_ 166 BRAKE: 8 XXX
SG_ BRAKE_AMOUNT : 7|8@0+ (1,0) [0|255] "" XXX
SG_ BRAKE_PEDAL : 23|8@0+ (1,0) [0|255] "" XXX
Expand All @@ -57,11 +62,18 @@ BO_ 180 SPEED: 8 XXX

BO_ 466 PCM_CRUISE: 8 XXX
SG_ GAS_RELEASED : 4|1@0+ (1,0) [0|1] "" XXX
SG_ CRUISE_ACTIVE : 5|1@0+ (1,0) [0|1] "" XXX
SG_ STANDSTILL_ON : 12|1@0+ (1,0) [0|1] "" XXX
SG_ ACCEL_NET : 23|16@0- (0.001,0) [-20|20] "m/s2" XXX
SG_ CRUISE_STATE : 55|4@0+ (1,0) [0|15] "" XXX
SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 467 PCM_CRUISE_2: 8 XXX
SG_ MAIN_ON : 15|1@0+ (1,0) [0|1] "" XXX
SG_ LOW_SPEED_LOCKOUT : 14|2@0+ (1,0) [0|3] "kph" XXX
SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "kph" XXX
SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 552 ACCELEROMETER: 8 XXX
SG_ ACCEL_Z : 22|15@0- (1,0) [0|32767] "" XXX
SG_ ACCEL_X : 6|15@0- (0.001,0) [-20|20] "m/s2" XXX
Expand Down Expand Up @@ -102,23 +114,10 @@ BO_ 835 ACC_CONTROL: 8 DSU
SG_ CANCEL_REQ : 24|1@0+ (1,0) [0|1] "" HCU
SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 1556 STEERING_LEVERS: 8 XXX
SG_ TURN_SIGNALS : 29|2@0+ (1,0) [0|3] "" XXX

BO_ 37 STEER_ANGLE_SENSOR: 8 XXX
SG_ STEER_ANGLE : 3|12@0- (1.5,0) [-500|500] "deg" XXX
SG_ STEER_FRACTION : 39|4@0- (0.1,0) [-0.7|0.7] "deg" XXX
SG_ STEER_RATE : 35|12@0- (1,0) [-2000|2000] "deg/s" XXX

BO_ 467 PCM_CRUISE_2: 8 XXX
SG_ MAIN_ON : 15|1@0+ (1,0) [0|1] "" XXX
SG_ LOW_SPEED_LOCKOUT : 14|2@0+ (1,0) [0|3] "kph" XXX
SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "kph" XXX
SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 921 PCM_CRUISE_SM: 8 XXX
SG_ MAIN_ON : 4|1@0+ (1,0) [0|1] "" XXX
SG_ CRUISE_CONTROL_STATE : 11|4@0+ (1,0) [0|15] "" XXX
SG_ DISTANCE_LINES : 14|2@0+ (1,0) [0|3] "" XXX
SG_ UI_SET_SPEED : 31|8@0+ (1,0) [0|255] "" XXX

BO_ 951 ESP_CONTROL: 8 ESP
Expand Down Expand Up @@ -149,6 +148,9 @@ BO_ 1042 LKAS_HUD: 8 XXX

BO_ 1553 UI_SEETING: 8 XXX
SG_ UNITS : 26|2@0+ (1,0) [0|3] "" XXX

BO_ 1556 STEERING_LEVERS: 8 XXX
SG_ TURN_SIGNALS : 29|2@0+ (1,0) [0|3] "" XXX

BO_ 1568 SEATS_DOORS: 8 XXX
SG_ SEATBELT_DRIVER_UNLATCHED : 62|1@0+ (1,0) [0|1] "" XXX
Expand All @@ -160,32 +162,95 @@ BO_ 1568 SEATS_DOORS: 8 XXX
BO_ 1570 LIGHT_STALK: 8 SCM
SG_ AUTO_HIGH_BEAM : 37|1@0+ (1,0) [0|1] "" XXX

BO_ 1161 RSA1: 8 FCM
SG_ TSGN1 : 7|8@0+ (1,0) [0|0] "" XXX
SG_ TSGNGRY1 : 12|3@0+ (1,0) [0|0] "" XXX
SG_ TSGNHLT1 : 9|2@0+ (1,0) [0|0] "" XXX
SG_ SPDVAL1 : 23|8@0+ (1,0) [0|0] "kph" XXX
SG_ SPLSGN1 : 31|4@0+ (1,0) [0|0] "" XXX
SG_ SPLSGN2 : 27|4@0+ (1,0) [0|0] "" XXX
SG_ TSGN2 : 39|8@0+ (1,0) [0|0] "" XXX
SG_ TSGNGRY2 : 44|3@0+ (1,0) [0|0] "" XXX
SG_ TSGNHLT2 : 41|2@0+ (1,0) [0|0] "" XXX
SG_ SPDVAL2 : 55|8@0+ (1,0) [0|0] "" XXX
SG_ BZRRQ_P : 63|2@0+ (1,0) [0|0] "" XXX
SG_ BZRRQ_A : 61|2@0+ (1,0) [0|0] "" XXX
SG_ SYNCID1 : 59|4@0+ (1,0) [0|0] "" XXX

BO_ 1162 RSA2: 8 FCM
SG_ TSGN3 : 7|8@0+ (1,0) [0|0] "" XXX
SG_ TSGNGRY3 : 12|3@0+ (1,0) [0|0] "" XXX
SG_ TSGNHLT3 : 9|2@0+ (1,0) [0|0] "" XXX
SG_ SPLSGN3 : 31|4@0+ (1,0) [0|0] "" XXX
SG_ SPLSGN4 : 27|4@0+ (1,0) [0|0] "" XXX
SG_ TSGN4 : 39|8@0+ (1,0) [0|0] "" XXX
SG_ TSGNGRY4 : 44|3@0+ (1,0) [0|0] "" XXX
SG_ TSGNHLT4 : 41|2@0+ (1,0) [0|0] "" XXX
SG_ DPSGNREQ : 54|1@0+ (1,0) [0|0] "" XXX
SG_ SGNNUMP : 53|3@0+ (1,0) [0|0] "" XXX
SG_ SGNNUMA : 50|3@0+ (1,0) [0|0] "" XXX
SG_ SPDUNT : 63|2@0+ (1,0) [0|0] "" XXX
SG_ TSRWMSG : 61|2@0+ (1,0) [0|0] "" XXX
SG_ SYNCID2 : 59|4@0+ (1,0) [0|0] "" XXX

BO_ 1163 RSA3: 8 FCM
SG_ TSREQPD : 7|1@0+ (1,0) [0|0] "" XXX
SG_ TSRMSW : 6|1@0+ (1,0) [0|0] "" XXX
SG_ OTSGNNTM : 5|2@0+ (1,0) [0|0] "" XXX
SG_ NTLVLSPD : 3|2@0+ (1,0) [0|0] "" XXX
SG_ OVSPNTM : 1|2@0+ (1,0) [0|0] "" XXX
SG_ OVSPVALL : 11|4@0+ (1,-5) [0|0] "" XXX
SG_ OVSPVALM : 19|4@0+ (1,-5) [0|0] "" XXX
SG_ OVSPVALH : 27|4@0+ (1,-5) [0|0] "" XXX
SG_ TSRSPU : 33|2@0+ (1,0) [0|0] "" XXX

CM_ SG_ 36 ACCEL_Y "unit is tbd";
CM_ SG_ 36 YAW_RATE "verify";
CM_ SG_ 36 STEERING_TORQUE "does not seem the steer torque, tbd";
CM_ SG_ 37 STEER_FRACTION "1/15th of the signal STEER_ANGLE, which is 1.5 deg; note that 0x8 is never set";
CM_ SG_ 37 STEER_RATE "factor is tbd";
CM_ SG_ 466 ACCEL_NET "net acceleration produced by the system, given ACCEL_CMD, road grade and other factors";
CM_ SG_ 467 SET_SPEED "43 kph are shown as 28mph, so conversion isnt perfect";
CM_ SG_ 467 LOW_SPEED_LOCKOUT "in low speed lockout, system would always disengage below 28mph";
CM_ SG_ 560 BRAKE_PRESSED "another brake pressed?";
CM_ SG_ 951 BRAKE_LIGHTS_ACC "brake lights when ACC commands decel";
CM_ SG_ 608 STEER_TORQUE_DRIVER "driver torque";
CM_ SG_ 608 STEER_OVERRIDE "set when driver torque exceeds a certain value";
CM_ SG_ 614 ANGLE "set to measured angle when ipas control isn't active";
CM_ SG_ 37 STEER_FRACTION "1/15th of the signal STEER_ANGLE, which is 1.5 deg; note that 0x8 is never set";
CM_ SG_ 37 STEER_RATE "factor is tbd";
CM_ SG_ 467 SET_SPEED "43 kph are shown as 28mph, so conversion isnt perfect";
CM_ SG_ 467 LOW_SPEED_LOCKOUT "in low speed lockout, system would always disengage below 28mph";
CM_ SG_ 921 UI_SET_SPEED "set speed shown in UI with user set unit";
CM_ SG_ 951 BRAKE_LIGHTS_ACC "brake lights when ACC commands decel";
CM_ SG_ 1042 SET_ME_1 "unclear what this is, but it's always 1 in drive traces";
CM_ SG_ 1042 REPEATED_BEEPS "recommended for fcw and other important alerts";
VAL_ 466 CRUISE_STATE 8 "active" 7 "standstill" 1 "off" ;
VAL_ 467 LOW_SPEED_LOCKOUT 2 "low speed locked" 1 "ok" ;
CM_ SG_ 1161 SPDVAL1 "Numbers 0-199 is displayed, 200-254 displays circle without number and 255 is for no limit.";
CM_ SG_ 1161 SYNCID1 "counter from 1 to f at 1 Hz";
CM_ SG_ 1161 SPDVAL2 "conditional speed value 70"
CM_ SG_ 1162 SGNNUMP "1 if SPDVAL1 is set, otherwise 0";
CM_ SG_ 1162 SYNCID2 "counter from 1 to f at 1 Hz";
CM_ SG_ 1163 TSREQPD "always 1";
CM_ SG_ 1163 TSRMSW "always 1";
CM_ SG_ 1163 OTSGNNTM "always 3";
CM_ SG_ 1163 NTLVLSPD "always 3";
CM_ SG_ 1163 OVSPNTM "always 3";
CM_ SG_ 1163 OVSPVALL "-5 at start then 2 after 2 seconds";
CM_ SG_ 1163 OVSPVALM "-5 at start then 5 after 2 seconds";
CM_ SG_ 1163 OVSPVALH "-5 at start then 10 after 2 seconds";
CM_ SG_ 1163 TSRSPU "always 1";

VAL_ 466 CRUISE_STATE 8 "active" 7 "standstill" 1 "off";
VAL_ 467 LOW_SPEED_LOCKOUT 2 "low speed locked" 1 "ok";
VAL_ 614 STATE 3 "enabled" 1 "disabled";
VAL_ 614 DIRECTION_CMD 3 "right" 2 "center" 1 "left";
VAL_ 1553 UNITS 1 "km" 2 "miles";
VAL_ 1556 TURN_SIGNALS 3 "none" 2 "right" 1 "left" ;
VAL_ 921 CRUISE_CONTROL_STATE 2 "disabled" 11 "hold" 10 "hold_waiting_user_cmd" 6 "enabled" 5 "faulted";
VAL_ 1042 LDA_ALERT 3 "hold with continuous beep" 2 "LDA unavailable" 1 "hold" 0 "none";
VAL_ 1042 BARRIERS 3 "both" 2 "right" 1 "left" 0 "none";
VAL_ 1042 RIGHT_LINE 3 "orange" 2 "double" 1 "solid" 0 "none";
VAL_ 1042 LEFT_LINE 3 "orange" 2 "double" 1 "solid" 0 "none";
VAL_ 921 CRUISE_CONTROL_STATE 2 "disabled" 11 "hold" 10 "hold_waiting_user_cmd" 6 "enabled" 5 "faulted";
VAL_ 1553 UNITS 1 "km" 2 "miles";
VAL_ 1556 TURN_SIGNALS 3 "none" 2 "right" 1 "left";
VAL_ 1161 TSGN1 1 "speed sign" 0 "none";
VAL_ 1161 TSGN2 1 "speed sign" 0 "none";
VAL_ 1161 SPLSGN2 15 "conditional" 0 "none";
VAL_ 1162 TSGN3 0 "none" 1 "speed sign" 2 "0 unlimited" 7 "unlimited" 16 "highway" 17 "no highway" 18 "motorway" 19 "no motorway" 20 "in city" 21 "outside city" 22 "pedestrian area" 23 "no pedestrian area" 65 "no overtaking left" 66 "no overtaking right" 67 "overtaking allowed again" 65 "no overtake" 129 "no entry";
VAL_ 1162 SPLSGN3 15 "conditional" 0 "none";


CM_ "CHFFR_METRIC 37 STEER_ANGLE STEER_ANGLE 0.36 180";
39 changes: 39 additions & 0 deletions opendbc/generator/toyota/lexus_is_2018_pt.dbc
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,39 @@
CM_ "IMPORT _toyota_2017.dbc"
CM_ "IMPORT _comma.dbc"

BO_ 550 BRAKE_MODULE: 8 XXX
SG_ BRAKE_PRESSURE : 0|9@0+ (1,0) [0|511] "" XXX
SG_ BRAKE_POSITION : 16|9@0+ (1,0) [0|511] "" XXX
SG_ BRAKE_PRESSED : 37|1@0+ (1,0) [0|1] "" XXX

BO_ 705 GAS_PEDAL: 8 XXX
SG_ GAS_RELEASED : 3|1@0+ (1,0) [0|1] "" XXX
SG_ GAS_PEDAL : 55|8@0+ (0.005,0) [0|1] "" XXX

BO_ 608 STEER_TORQUE_SENSOR: 8 XXX
SG_ STEER_TORQUE_EPS : 47|16@0- (0.73,0) [-20000|20000] "" XXX
SG_ STEER_TORQUE_DRIVER : 15|16@0- (1,0) [-32768|32767] "" XXX
SG_ STEER_OVERRIDE : 0|1@0+ (1,0) [0|1] "" XXX
SG_ CHECKSUM : 63|8@0+ (1,0) [0|255] "" XXX

BO_ 610 EPS_STATUS: 5 EPS
SG_ IPAS_STATE : 3|4@0+ (1,0) [0|15] "" XXX
SG_ LKA_STATE : 31|7@0+ (1,0) [0|127] "" XXX
SG_ TYPE : 24|1@0+ (1,0) [0|1] "" XXX
SG_ CHECKSUM : 39|8@0+ (1,0) [0|255] "" XXX

BO_ 956 GEAR_PACKET: 8 XXX
SG_ GEAR : 13|6@0+ (1,0) [0|63] "" XXX

BO_ 1009 PCM_CRUISE_3: 8 XXX
SG_ MAIN_ON : 13|1@0+ (1,0) [0|3] "" XXX
SG_ CRUISE_STATE : 10|1@0+ (1,0) [0|1] "" XXX
SG_ SET_SPEED : 23|8@0+ (1,0) [0|255] "mph" XXX

CM_ SG_ 550 BRAKE_PRESSURE "seems prop to pedal force";
CM_ SG_ 550 BRAKE_POSITION "seems proportional to pedal displacement, unclear the max value of 0x1c8";
CM_ SG_ 610 TYPE "seems 1 on Corolla, 0 on all others";
CM_ SG_ 1009 SET_SPEED "units seem to be whatever the car is set to";
VAL_ 956 GEAR 0 "D" 1 "S" 8 "N" 16 "R" 32 "P";
VAL_ 610 IPAS_STATE 5 "override" 3 "enabled" 1 "disabled";
VAL_ 610 LKA_STATE 25 "temporary_fault" 9 "temporary_fault2" 5 "active" 1 "standby";
15 changes: 15 additions & 0 deletions opendbc/gm_global_a_powertrain.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -35,13 +35,18 @@ BS_:

BU_: K16_BECM K73_TCIC K9_BCM K43_PSCM K17_EBCM K20_ECM K114B_HPCM NEO K124_ASCM EPB
VAL_TABLE_ TurnSignals 2 "Right Turn" 1 "Left Turn" 0 "None" ;
VAL_TABLE_ Intellibeam 1 "Active" 0 "Inactive" ;
VAL_TABLE_ HighBeamsActive 1 "Active" 0 "Inactive" ;
VAL_TABLE_ HighBeamsTemporary 1 "Active" 0 "Inactive" ;
VAL_TABLE_ ACCLeadCar 1 "Present" 0 "Not Present" ;
VAL_TABLE_ ACCCmdActive 1 "Active" 0 "Inactive" ;
VAL_TABLE_ BrakePedalPressed 1 "Pressed" 0 "Depressed" ;
VAL_TABLE_ DistanceButton 1 "Active" 0 "Inactive" ;
VAL_TABLE_ LKAButton 1 "Active" 0 "Inactive" ;
VAL_TABLE_ ACCButtons 6 "Cancel" 5 "Main" 3 "Set" 2 "Resume" 1 "None" ;
VAL_TABLE_ DriveModeButton 1 "Active" 0 "Inactive" ;
VAL_TABLE_ PRNDL 3 "Reverse" 2 "Drive" 1 "Neutral" 0 "Park" ;
VAL_TABLE_ ESPButton 1 "Active" 0 "Inactive" ;
VAL_TABLE_ DoorStatus 1 "Opened" 0 "Closed" ;
VAL_TABLE_ SeatBeltStatus 1 "Latched" 0 "Unlatched" ;
VAL_TABLE_ LKASteeringCmdActive 1 "Active" 0 "Inactive" ;
Expand Down Expand Up @@ -81,9 +86,13 @@ BO_ 298 BCMDoorBeltStatus: 8 K9_BCM

BO_ 309 ECMPRDNL: 8 K20_ECM
SG_ PRNDL : 2|3@0+ (1,0) [0|0] "" NEO
SG_ ESPButton : 4|1@0+ (1,0) [0|1] "" XXX

BO_ 320 BCMTurnSignals: 3 K9_BCM
SG_ TurnSignals : 19|2@0+ (1,0) [0|0] "" NEO
SG_ Intellibeam : 13|1@0+ (1,0) [0|1] "" XXX
SG_ HighBeamsActive : 7|1@0+ (1,0) [0|1] "" XXX
SG_ HighBeamsTemporary : 5|1@0+ (1,0) [0|1] "" XXX

BO_ 328 PSCM_148: 1 K43_PSCM

Expand Down Expand Up @@ -118,6 +127,7 @@ BO_ 481 ASCMSteeringButton: 7 K124_ASCM
SG_ DistanceButton : 22|1@0+ (1,0) [0|0] "" NEO
SG_ LKAButton : 23|1@0+ (1,0) [0|0] "" NEO
SG_ ACCButtons : 46|3@0+ (1,0) [0|0] "" NEO
SG_ DriveModeButton : 39|1@0+ (1,0) [0|1] "" XXX

BO_ 485 PSCMSteeringAngle: 8 K43_PSCM
SG_ SteeringWheelAngle : 15|16@0- (0.0625,0) [-540|540] "deg" NEO
Expand Down Expand Up @@ -224,8 +234,10 @@ BA_ "UseGMParameterIDs" 0;
VAL_ 481 DistanceButton 1 "Active" 0 "Inactive" ;
VAL_ 481 LKAButton 1 "Active" 0 "Inactive" ;
VAL_ 481 ACCButtons 6 "Cancel" 5 "Main" 3 "Set" 2 "Resume" 1 "None" ;
VAL_ 481 DriveModeButton 1 "Active" 0 "Inactive" ;
VAL_ 452 CruiseState 4 "Standstill" 3 "Faulted" 1 "Active" 0 "Off" ;
VAL_ 309 PRNDL 3 "Reverse" 2 "Drive" 1 "Neutral" 0 "Park" ;
VAL_ 309 ESPButton 1 "Active" 0 "Inactive" ;
VAL_ 384 LKASteeringCmdActive 1 "Active" 0 "Inactive" ;
VAL_ 880 ACCLeadCar 1 "Present" 0 "Not Present" ;
VAL_ 880 ACCGapLevel 3 "Far" 2 "Med" 1 "Near" 0 "Inactive" ;
Expand All @@ -237,4 +249,7 @@ VAL_ 388 LKATorqueDeliveredStatus 3 "Failed" 2 "Temp. Limited" 1 "Active" 0 "Ina
VAL_ 489 BrakePedalPressed 1 "Pressed" 0 "Depressed" ;
VAL_ 715 GasRegenCmdActiveInv 1 "Inactive" 0 "Active" ;
VAL_ 715 GasRegenCmdActive 1 "Active" 0 "Inactive" ;
VAL_ 320 Intellibeam 1 "Active" 0 "Inactive" ;
VAL_ 320 HighBeamsActive 1 "Active" 0 "Inactive" ;
VAL_ 320 HighBeamsTemporary 1 "Active" 0 "Inactive" ;

1 change: 1 addition & 0 deletions opendbc/honda_accord_lx15t_2018_can_generated.dbc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -264,6 +264,7 @@ BO_ 891 STALK_STATUS_2: 8 XXX
SG_ CHECKSUM : 59|4@0+ (1,0) [0|3] "" EON
SG_ COUNTER : 61|2@0+ (1,0) [0|3] "" EON

VAL_ 399 STEER_STATUS 6 "tmp_fault" 5 "fault_1" 4 "no_torque_alert_2" 3 "low_speed_lockout" 2 "no_torque_alert_1" 0 "normal" ;
CM_ "honda_accord_lx15t_2018_can.dbc starts here"


Expand Down
Loading

0 comments on commit 3e78efa

Please sign in to comment.