Skip to content

denjhang/MAmidiMEmo

BranchesTags
 
 

Repository files navigation

MAmidiMEmo 5.7.1.1 Itoken (c)2019, 2024 / GPL-2.0

*** What is the MAmidiMEmo? ***

MAmidiMEmo is a virtual chiptune sound MIDI module using a MAME sound engine. You can control various chips and make sound via MIDI I/F. So, you don't need to use dedicated tracker and so on anymore. You can use your favorite MIDI sequencer to make a chip sound.

See samples https://www.youtube.com/channel/UCGYO2bEPPIM2LTNDbBEDaAQ

MAmidiMEmo adopts multi timbre method. That mean you can play multi chords on MIDI 1ch if the chip has multi ch.

e.g.) YM2151 has 8ch FM sounds, so you can play 8 chords on MIDI 1ch or sharing 8ch with MIDI 16ch like a SC-55 and so on. As well, NES APU has 2ch for square wave, so you can play 2 chords on MIDI 1ch when select a square wave timbre. However, when you select a triangle wave timbre, you can play 1 chord on MIDI 1ch. Because NES APU has only 1ch for triangle wave.

*** How to use MAmidiMEmo ***

  1. Requirements

    *H/W

     CPU: Intel Core series CPU or equivalent, at least 2.0 GHz
 MEM: at least 4GB
 Sound: DirectSound capable sound card/onboard audio
 MIDI: MIDI IN I/F

    *S/W

     OS: Windows 10 or lator
 Runtime: .NET Framework 4.7 or lator
          VC++ 2012 Runtime https://www.microsoft.com/en-au/download/details.aspx?id=30679

  2. Extract downloaded zip file. Execute "DelZoneID.ps1" on PowerShell to remove "Zone.Identifier" flag.

    ★日本語フォルダには現状対応していません★

  3. Install VC++ runtime 2012 and .NET Framework 4.7 or lator.

  4. Launch MAmidiMEmo.exe

    Note: You can change the value of audio latency, sampling rate and audio output interface by [Tool] menu. PortAudio is a low latency sound engine. See http://www.portaudio.com/ Note: Allow ★firewall communication to MAmidiMEmo and your DAW.

  5. Select MIDI I/F from toolbar. MAmidiMEmo will recevie MIDI message from the selected MIDI I/F.

    Note: You can use the loopMIDI (See http://www.tobias-erichsen.de/software/loopmidi.html) to send MIDI message from this PC to MAmidiMEmo.

  6. Add your favorite chips from the [Instruments] menu on the toolbar.

    Note: Currently supported chips are the following.

     YM2151, YM2612, YM3812, YM2413, YM2610B, YMF262
 YM2601 ★★★ Place legitimate ym2608_adpcm_rom.bin file in the Mami dir ★★★
 SID, POKEY, GB APU, SN76496, NES APU, MSM5232(+TA7630), AY-3-8910
 NAMCO CUS30, SCC, HuC6280
 C140, SPC700
 MT-32 ★★★ Place legitimate MT32_CONTROL.ROM and MT32_PCM.ROM files in the Mami dir ★★★
 CM-32P This is an incomplete simulator, not an emulator.
        You can mod and add your custom sounds by editing tbl and sound font files.
        Please contact me if you can help me to create CM-32P and SN-U110 sound fonts.
 TMS5220, SP0256, SAM

    Note: You can add the chip up to 8 per same chip type and MAmidiMEmo eats more CPU power.

  7. Select the chip from the left pane and configure the chip on the right pane.

    *[Timbres] You can edit sound character from this property. It's selected by "Program Change" MIDI message. Please refer the following articles or MAME sources to understand these timbre parameters.

    YM2151: https://www16.atwiki.jp/mxdrv/pages/24.html

    YM2612: https://www.plutiedev.com/ym2612-registers http://www.smspower.org/maxim/Documents/YM2612

    NES APU: http://hp.vector.co.jp/authors/VA042397/nes/apu.html https://wiki.nesdev.com/w/index.php/APU https://wiki.nesdev.com/w/index.php/APU_DMC

    GB APU: http://bgb.bircd.org/pandocs.htm#soundcontrolregisters https://gbdev.gg8.se/wiki/articles/Gameboy_sound_hardware http://mydocuments.g2.xrea.com/ http://marc.rawer.de/Gameboy/Docs/GBCPUman.pdf http://www.devrs.com/gb/files/hosted/GBSOUND.txt

    NAMCO CUS30: https://www.walkofmind.com/programming/pie/wsg3.htm http://fpga.blog.shinobi.jp/fpga/おんげん！

    SN76489: http://www.smspower.org/Development/SN76489 http://www.st.rim.or.jp/~nkomatsu/peripheral/SN76489.html

    SCC: http://bifi.msxnet.org/msxnet/tech/scc.html

    YM3812: http://www.oplx.com/opl2/docs/adlib_sb.txt

    YM2413: http://d4.princess.ne.jp/msx/datas/OPLL/YM2413AP.html#31 http://www.smspower.org/maxim/Documents/YM2413ApplicationManual http://hp.vector.co.jp/authors/VA054130/yamaha_curse.html

    MSM5232(+TA7630): http://www.citylan.it/wiki/images/3/3e/5232.pdf http://sr4.sakura.ne.jp/acsound/taito/taito5232.html

    AY-3-8910: http://ngs.no.coocan.jp/doc/wiki.cgi/TechHan?page=1%BE%CF+PSG%A4%C8%B2%BB%C0%BC%BD%D0%CE%CF https://w.atwiki.jp/msx-sdcc/pages/45.html http://f.rdw.se/AY-3-8910-datasheet.pdf

    SID: https://www.waitingforfriday.com/?p=661#6581_SID_Block_Diagram http://www.bellesondes.fr/wiki/doku.php?id=mos6581#mos6581_sound_interface_device_sid https://www.sfpgmr.net/blog/entry/mos-sid-6581を調べた.html

    HuC6280: http://www.magicengine.com/mkit/doc_hard_psg.html

    SPC700: https://wiki.superfamicom.org/spc700-reference

    POKEY: https://en.wikipedia.org/wiki/POKEY http://ftp.pigwa.net/stuff/collections/SIO2SD_DVD/PC/RMT%201.19/docs/rmt_en.htm https://www.atariarchives.org/dere/chapt07.php http://user.xmission.com/~trevin/atari/pokey_regs.html

    YM2610: http://www.ajworld.net/neogeodev/ym2610am2.html

    MT-32: https://sourceforge.net/projects/munt/ http://lib.roland.co.jp/support/jp/manuals/res/1809744/MT-32_j2.pdf

    CM-64: http://lib.roland.co.jp/support/jp/manuals/res/1809003/CM-64_j.pdf

    YMF262: http://map.grauw.nl/resources/sound/yamaha_ymf262.pdf

    YM2608: https://www.quarter-dev.info/archives/yamaha/YM2608_Applicatin_Manual.pdf

    TMS5220 https://www.dexsilicium.com/tms5220.pdf http://www.stuartconner.me.uk/ti_portable_speech_lab/ti_portable_speech_lab.htm

    SP0256 http://spatula-city.org/~im14u2c/sp0256-al2/Archer_SP0256-AL2.pdf

    SAM https://github.com/s-macke/SAM http://www.retrobits.net/atari/sam.shtml

    uPD1771 http://takeda-toshiya.my.coocan.jp/scv/scv.pdf

    *[Channels] Select which MIDI ch messages the chip receives.

  8. Play MIDI file by your favorite sequencer or player. Of course, you can connect your favrite keyboard to MAmidiMEmo for live performance.

    MAmidiMEmo currently supports the following MIDI messages.

    Note On with velocity Note Off Program Change Control Change Pitch and PitchRange Volume and Expression Panpot Modulation, Modulation Depth, Modulation Range, Modulation Delay Portamento, Portamento Time All Note Off, (All Sound Off) CC#126/127 Mono/Poly mode. Spec is almost same with FITOM. Sound Control (for modifying a Timbre properties dynamically) Effect Depth (for modifying a VST properties dynamically) General Purpose Control (for modifying an instrument properties dynamically)

  9. Also, you can set the following sound driver settings from Timbre settings.

    Arpeggio ADSR Effect (Pitch/Volue/Duty macro)

  10. You can modify current timbre parameters via Sound control MIDI Message (70-75,79) dynamically. You can modify VST parameters via Effect Depth control MIDI Message (91-95) dynamically. You can modify other parameters via General Purpose control MIDI Message (16-19,80-83) dynamically.

  11. You can modify receving MIDI ch for the specific instrument via NRPN MIDI Message.

NRPN format is the following.

Bx 63 41 Bx 62 ... Specify Device ID of existing instrument. Bx 26 ... Specify Unit No of the above Device ID of existing instrument. Bx 06 <Receiving MIDI ch(1-7) bit sets. 1=On, 0=Off>

     bit  6  5  4  3  2  1  0
      ch   7  6  5  4  3  2  1

Bx 63 42 Bx 62 ... Specify Device ID of existing instrument. Bx 26 ... Specify Unit No of the above Device ID of existing instrument. Bx 06 <Receiving MIDI ch(8-14) bit sets. 1=On, 0=Off>

     bit  6  5  4  3  2  1  0
      ch  14 13 12 11 10  9  8

Bx 63 43 Bx 62 ... Specify Device ID of existing instrument. Bx 26 ... Specify Unit No of the above Device ID of existing instrument. Bx 06 <Receiving MIDI ch(15-16) bit sets. 1=On, 0=Off>

     bit  6  5  4  3  2  1  0
      ch xx xx xx xx xx 16 15
  1. (TBD) You can modify current environment and all timbre parameters via System Exclusive MIDI Message.

Master Volume: "F0 7F 7F 04 01 00 nn F7"

YM2151:(TBD)
YM2612:(TBD)
NES APU:(TBD)
GB APU:(TBD)
NAMCO CUS30:(TBD)
SN76489:(TBD)
:::
  1. SPFM

You can use a real sound chip instead of software emulation chip. Currently supported chips are YM2151 and YM2608 on SPFM. Before using the SPFM, you must setup SCCI by using the scciconfig.exe.

  1. VSIF

    You can use a real machine instead of software emulation chip. Please see tha manual. https://github.com/110-kenichi/mame/blob/master/docs/MAmidiMEmo/Manual.pdf

*** ★Known issues and limitations★ ***

  1. ★日本語フォルダには現状対応していません★
  2. You need to ★save the data ★manually on the DAW (Cubase and so on). Or, keep open the dummy editor window of the MAmidiMemo.
  3. Allow ★firewall communication to MAmidiMEmo and your DAW.
  4. MT-32 & CM32-P can not store/restore last settings.
  5. HuC6820 suddenly stop sounding. Please restart MAmi.
  6. MAmidiMEmo process stuck after sound interface changed if you used SCCI interface.

*** How to create build environment ***

  1. Install LATEST Visual Studio 2022 w/ VC++, C#, Windows Universal CRT SDK, .NET 4.7 SDK and Targeting Pack
  2. Install Windows 8.1 SDK and 10 SDK
  3. Install MinGW Development Environment(https://www.mamedev.org/tools/)
  4. Install vcpkg

*** Donate for supporting the MAmidiMEmo ***

Donate

*** Changes 5.7.1.1 Re-improved Hi-DPI screen handling. 5.7.1.0 Improved Hi-DPI screen handling. 5.7.0.0 Supported *.mop* file importing on TimbreManager. 5.6.18.0 Fixed Multi-Media Keys handling. 5.6.17.0 Fixed Hold Off MIDI message handling. 5.6.16.0 Fixed ch9-18 address calculation for OPL3 for SCCI. 5.6.15.0 Showed the program number name on ProgramNumbers property. Fixed ModulationRateShift prop is not working property. 5.6.14.0 Added external tool path settings on the Option dialog. Youcan launch the tool from the FM Tone Editor. 5.6.13.0 Added properties regarding modulation offset to the Midi Driver Settings on a Timbre. 5.6.12.1 Fixed some VGM file's tempo is too slow. (Rate values in VGM files are now ignored.) 5.6.12.0 Fixed AMD,PMD for OPM and OPZ. AMD and PMD can be handled simultaneously rather than exclusively. OPM engine changed to the ymfm. 5.6.11.0 Supported VGI file importing. Fixed some missing register values when importing FM tone files. 5.6.10.0 FM TimbreEditor allows copy/paste tone data from/to Clipboard. Fixed Pcm data loading size is too long. Improved DAC transfer rate. 5.6.9.1 Fixed MaxDacPcmVoices causes exception. Included manuals 5.6.9.0 Improved FM Editor function. 5.6.8.2 Fixed XGM2 PCM. 5.6.8.1 Fixed XGM/XGM2 Recording. Fixed an issue where pressing the Enter key would unintentionally close the editor window. Fixed sequential numbering of saved file names 5.6.8.0 Fixed play status icon in LCD area does not change after playing stopped. Remembered FM register patch file path information for FM Timbre. Added "Privacy" settings to the settings dialog. Enabled turboR mode for VSIF for MSX (VGM_msx*.rom). ( Pressing Z key to disable tR mode while booting ) 5.6.7.0 Added MIDI ChanelTypes value "Drum(Ignore GateTime)". 5.6.6.1 Fixed DAC in YM2612 Software SoundEngine. 5.6.6.0 Supported DAC in YM2612 Software SoundEngine. (Other chips are available upon your request) 5.6.5.1 Fixed Timbre.AssignMIDIChtoSlotNumOffset not working properly. 5.6.5.0 Supported 24bit WAVE file importing. Added Timbre List Window. You can open it from context menu of the Instrument icon. Fixed FM Editor DR, SL lines drawing for OPL series. 5.6.4.0 Added MRU and autocomplete function to directory textbox in TimbreManager. Fixed MonoMode may not work properly when CombinedTimbre is sounded. 5.6.3.0 Fixed problem with Timbre being replaced when dragging and dropping WAV files. Added the function to set DrumTimbre as well in TimbreManager. 5.6.2.2 Changed the copy function of Timbre when drag & drop in TimbreManager and DrumEditor from the Shift key to the Ctrl key. 5.6.2.1 Supported YM2149 with YM2608/YM2203 for VGMPlayer Swap Shift key effect for Drag & Drop in TimbreManager and DrumEditor. 5.6.2.0 Supported SAA1099 for VSIF MSX(FTDI) both MAmidiMEmo and VGMPlayer. You need to update VGM_msx*.rom too. 5.6.1.0 Added KeyOffStop property to FxS settings. To select envelope release timing of FxEngine when key off. 5.6.0.0 Supported SAA1099. Fixed envelope release timing of FxEngine when key off. (Preliminary) Supported XGM2 recording and fixed XGM PCM data. 5.5.0.2 Fixed supporting RF5C68. 5.5.0.0 Supported G.I.M.I.C STIC OPLL, OPN2*, SPSG, SSG, AYPSG. Supported playing RF5C68 vgm data on MEGA-CD via VGMPlayer. 5.4.4.0 Supported WAV sample rate auto conversion. 5.4.3.2 Fixed crashing while launching the x86 MAmi. (Experimentaly) Supported MSX turbo R mode for VSIF. Pressing "Z" key while booting the VGM_msx.rom/VGM_msx_Vkey.rom 5.4.3.1 Added SMS only special mode for FTDI dongle. OPLL and DSCG can sound simultenaously. 5.4.3.0 Supported mopm/mopn file importing to OPN*/OPM ★Breaking changes★ Fixed the effect of modulation effects of the ModulationDepthes property. 5.4.2.0 Fixed incorrect soundding in mono mode. 5.4.1.0 Supported SPFM for YM2413, YM3812, YMF262, YM3806 5.4.0.1 Fixed SMS(FTDI) clk generator. 5.4.0.0 Supported SMS(FTDI). FTDI dongle is compatible with for the Genesis. 5.3.0.1 Fixed minor bugs related with Font. 5.3.0.0 Added Font scale option in the Settings dialog. But not perfect. 5.2.2.0 Added KeyScaleLevel property on the FxS. 5.2.1.0 Suported MEGA CD(VSIF Genesis(FTDI)) vgm by VGMPlayer. Note1: No supported streaming vgm data. Note2: There is noise at the start of playback. 5.2.0.1 Fixed loop off processing for MEGA CD(VSIF Genesis(FTDI)). 5.2.0.0 Supported RF5C164 and MEGA CD(VSIF Genesis(FTDI)). 5.1.0.1 YM2608 Software Emulation can not be played via RPC. 5.1.0.0 Supported YM2608 for RPC server feature. Other applications can control MAmidiMEmo chips via RPC. 5.0.1.0 Added the ability to specify the number directly in the TimbreNumber setting. 5.0.0.9 Fixed LoopPoint value when importing SF2 file as 12bit PCM for SEGA MultiPCM. 5.0.0.8 Fixed noise sounding when D1R is too low for SEGA MultiPCM. 5.0.0.7 Supported 12bit PCM for SEGA MultiPCM 5.0.0.6 Fixed importing WAV file for SEGA MultiPCM. You NEED to re-create MultiPCM instrument. 5.0.0.5 Fixed Panpot for SEGA MultiPCM. Reduced internal gain level for SEGA MultiPCM. 5.0.0.4 Fixed LoopPoint calculation for SEGA MultiPCM. Fixed BaseFreq when import SF2. 5.0.0.3 (Again)Fixed frequency calculation for SEGA MultiPCM. 5.0.0.2 Supported MasterClock and 12bit RAW PCM for SEGA MultiPCM. 5.0.0.1 Fixed frequency and master clock for SEGA MultiPCM. 5.0.0.0 Supported SEGA MultiPCM. 4.9.10.1 Updated VGMPlayer(only) to support PC-8801 OPNA/OPN 4.9.10.0 Added DAC PCM mode for OPNA. Just a bonus feature :-) 4.9.9.0 Supported PC-8801 OPNA 4.9.8.1 Fixed an error on UseAltVRC6Cart prop value set by slider. 4.9.8.0 FtdiClkWidth to be adjusted when the VSIF connection is to FT232R or not. 4.9.7.1 Fixed SCC not sounding properly. 4.9.7.0 Added PcmData12 property to support 12bit PCM data for C140 chip. Warning For 12-bit PCM data, the Gain value should be lower than for 8-bit PCM data. 4.9.6.1 Fixed OPNA/B BaseFreq calculation algorithm when WAV file loading. ( 55000Hz -> 55555.55...Hz ) 4.9.6.0 Fixed RP2A03 VRC6 and FDS upper pitch is 4bit from 3bit. Fixed RP2A03 FDS velocity calculation and added FdsMasterVolume property. Fixed RP2A03 LFO values are not set properly and caclulated. Added RP2A03 Lfo Bias properly. 4.9.5.0 Fixed SP0256 freezing on high frequency sound. Added the UseAltVRC7Cart property for YM2413 as experimental Fixed unstable reconnection to the SPC700 on the G.I.M.I.C . 4.9.4.0 Preliminary supported VRC7 (VSIF - Famicom VRC6/7) as YM2413 variant chip DS1001. 4.9.3.1 Fixed SPC700 emulator keyon/keyoff 4.9.3.0 Supported a real chip of the SPC700 on the G.I.M.I.C . 4.9.2.0 Supported MAmi VRC6 CART for RP2A03. 4.9.1.2 Fixed YM2610B ADPCM-A keyon/keyoff is not working properly. 4.9.1.1 Fixed YM2610B ADPCM-B panpot is not working properly. 4.9.1.0 Updated dependent libraries. Fixed SCC/LFO morphing envelopes of SDS.Fx. 1st envelope was not applied properly. Fixed WSG editor. Text editing values were not reflected to GUI properly. 4.9.0.1 Fixed Receiving ch is not working properly. 4.9.0.0 Added MIDI THRU instrument. Supported variable pitch and volume for RP2A03 DPCM. 4.8.2.1 Added VGM_P6M.bin for ROM Cartridge of PC-6001. 4.8.2.0 Added Copy button on the SCC WSG Morph Editor. 4.8.1.0 Improved VSIF stability and supported DAC PCM(Real only) for Famicom ★Please update VGMPlay_nes*.nes 4.8.0.0 Added SCC WSG Morph Editor. Displayed the ToolTip in the FM Timbe Editor only once. 4.7.9.0 Improved VSTi close processing to avoid crashing on some DAWs. Improved initialize routine for the Real Chip Fixed VGM recording folder is not created. 4.7.8.2 Remove dummy VSTi window to avoid crashing. 4.7.8.1 Fixed GUI layout of the Dialog. 4.7.8.0 Fixed GUI layout of the Dialog for Hi-DPI display. Thanks Akibasuki-san! Fixed freezing while YM2608 ADPCM transferring. Fixed MasterClock handling for SPFM Fixed CombinedTimbre delay sounding Accepted no SEGA, KONAMI, CAPCOM PCM chips to play VGM files 4.7.7.0 Supported displaying Timbre/CombinedTimbre name for some props. 4.7.6.2 Supported OKIM6259 Improved DAC stream performance for VGM file 4.7.6.1 Improved DAC PCM souding. Added option dialog for VGMPlayer. 4.7.6.0 Improved DAC PCM souding timing & XGM/VGM player souding timing. 4.7.5.1 Fixed DAC nosie for VSIF for Genesis/MD. 4.7.5.0 Supported DrumTibre.GateTime = 0 for YM2612 DAC PCM to play end of PCM. 4.7.4.1 Supported K053260 for VGMPlayer. 4.7.4.0 Supported SEGAPCM for VGMPlayer. Improved DAC performance. 4.7.3.0 Added Min Max values for Randmizer on FM Timbre Editor. Improved Reset menu behavior for Property Fixed YM2151 Timbre Settings (Degraded at v4.6.9.0) 4.7.2.0 Added UseExprForModulator, ExprTargetModulators property for the FM Synth Timbre. You can change FM Modulator(Operator) TL by MIDI Expression. Improved DAC performance of VGMPlayer. Added Timbre Manager. You can manage Timbres more easily. Improved Drum Editor function. Fixed VGMPlayer not sounding sound on Genesis/MD with some flashcart. 4.7.1.0 Improved data transfer speed for FTDI. 4.7.0.0 Supported XGM recording by NRPN. For more information, see the manual. Fixed XGM DAC playing issue created by MAmi. 4.6.10.0 Added SerializeData Save/Load feature Supported Import/Export FM tone file as MAmi format. Re-fixed Save/Load error on DAW. Fixed VGMPlay DAC volume. 4.6.9.0 Added ADSR.SR property. Fixed ADSR.SL for SN76489 volume calculation. Fixed Software Envelope ReleasePoint when point is zero. Added AssignMIDIChtoSlotNumOffset property for AssignMIDIChtoSlotNum. Fixed MONO mode. When key on on mono mode ch, completele OFF the last note sound. Reduced crashing while closing DAW. Improved FTDI speed for MAmidiMEmo. Fixed Save/Load error on DAW. (Preliminary) Added sin/sq/tri wave create button on the SW Envelope editor. (Preliminary) Supported LegatoFootSwitch(CC#68). Enabled only MONO = 1 and RecentlyUsedSlot mode. (Preliminary) Supported DAC PCM for YM2612 for REAL HARDWARE. 4.6.8.1 (Experimentaly)Supported SE mode and 5 ch mode for YM2612. (Experimentaly)Added MIDI ch equals FM ch mode for YM2612 and DCSG( AssignMIDIChtoSlotNum property ). 4.6.8.0 Added VelocitySensitivity for FM Career TL on MidiDriverSettings. ★Default value is "2". "0" means Velocity equals TL. "3" is default value of previous version. Improved latency of VSTi module for certain DAW. Added FineTunes Property. FineTunes Property can change by RPN. 4.6.7.1 Fixed importing .FF/.FFOPM file. Fixed velocity is invalid. 4.6.7.0 Supported importing .FF/.FFOPM file. 4.6.6.2 Not sounding fixed for OPM of GIMIC 4.6.6.1 Tentatively fixed SID emulator output frequency changes when sample rate is other than 48KHz. 4.6.6.0 Suppressed F/W dialog at startup. And add the "-chip_server" option to enable RPC server feature to control MAmidiMEmo chips from other applications. 4.6.5.8 Supported OKI MSM6258 for VGMPlayer. OKI MSM6258 can be sounded by OPNA/OPN2 DAC 4.6.5.7 Improved performance of G.I.M.I.C . 4.6.5.6 Supported OPN3-L for proxy of OPNA Reset G.I.M.I.C before start playing a VGM or reset instrument. Fixed freezing while ADPCM data transferring on YM2608 and RP2A03. 4.6.5.5 Supported OPN3L for G.I.M.I.C as proxy of OPNA. 4.6.5.3 Fixed OPM could not be selected on VGMPlayer 4.6.5.2 Supported G.I.M.I.C by VGMPlayer for OPM & OPNA User DirectAccess API for G.I.M.I.C to avoid cache miss 4.6.5.1 Fixed ADPCM volume cache for YM2608 for GIMIC. 4.6.5.0 Supported GIMIC for YM2608 & YM2151. 　　　　 ★Remove c86ctl.dll if exists on the MAmidiMEmo dir if you want to use the GIMIC for YM2608 & YM2151.★ 4.6.4.2 Supported ADPCM light wait mode for SPFM/SPFM Light to play DAC. 4.6.4.1 Added Chip information area for VGMPlayer. 4.6.4.0 Fixed MGS file playing not started for VGMPlayer. (Experimantal)Changed VelocityMap and NoteMap property behavior. Parameter changes are temporary, not permanent. 4.6.3.0 Added the "$" keyword for the NoteMap property. The "$" keyword indicates its own value. 4.6.2.0 Added the NoteMap property in the Midi Driver Settings[MDS] in the Timbre settings. 4.6.1.1 Fixed RP2A03 FDS FreqMulitplyEnvelopes prop processing. 4.6.1.0 Re-fixed envelopes & MONO mode processing. 4.6.0.0 Added RP2A03 FDS LFO properties & envelopes. Fixed envelopes processing for some chips. 4.5.11.2 Improved DAC performance for OPN2 for MSX/P6. Please update rom, too. 4.5.11.1 Fixed a negative result in some cases on FTDI div offset for VGMPlayer. 4.5.11.0 Improved VSIF(FTDI) transfer speed. Please reset & re-adjust FTDI clk width. 4.5.10.0 Supported SPFM(Light) for VGM Player. Supported Pseudo DAC for OPNA for playing OPN2 DAC for VGM Player. 4.5.9.0 Shown non-modal window in taskbar. 4.5.8.2 Fixed typo F#9 for CombinedTimbre KeyRange. (Thanks D.M.88-san!) Fixed no-sounding when playing a VGM file contains dual chip mode. 4.5.8.1 Added FTDI baudrate change UI for VGMPlayer. 4.5.8.0 Renamed CM-32P user soundfont table sample file name. You need to remove "_memo" from tbl file name to use properly. Changed MSX rom filename for for VSIF(FTDI) to VGM_msx*.rom from VGMPlay_msx*.rom. Added tape(wav) files for VSIF(FTDI) for PC-6001. Supported the m3u playlist file for VGMPlayer. 4.5.7.2.1 Fixed VGMPlayer for YM2612 DAC. 4.5.7.2 Improved VSIF(FTDI) transfer speed. Please re-adjust FTDI CLK. 4.5.7.1 Fixed a minor bug. 4.5.7.0 Improved VSIF(FTDI) transfer speed. Please adjust FTDI CLK. 4.5.6.1 Fixed a SCC port error for VGMPlayer. 4.5.6.0 Supported OPN chip for VGMPlayer. Please update VGMPlay_msx.rom, too. (Thanks Niga-san!) Supported PC-6001 for VSIF(FTDI). VSIF(FTDI) spec is same as MSX. (Thanks Niga-san!) 4.5.5.4 Fixed an exception occuring on Serialize property for CM32P & MT32. 4.5.5.3 Added chip clock converter for VGMPlayer. 4.5.5.2 Fixed VGM/XGM playback routine for VGMPlayer. Added VGMPlay_msx_Vkey.rom (See the manual for details) 4.5.5.1 Fixed Graphic EQ error when sample rate is low. 4.5.5.0 Supported Y8950 for VGMPlayer. Improved VGM playback routine for VGMPlayer. 4.5.4.4 Improved SCC, OPL3 checking algorithm of VGMPlay_msx.rom. (Thanks Niga-san, Uniskie-san!) Fixed sound off routine for YM2612, DCSG. (Thanks Niga-san!) 4.5.4.3 Improved MMM(DCSG) checking algorithm of VGMPlay_msx.rom. (Thanks Niga-san, Uniskie-san!) Fixed OPL3 data transfer timing of VGMPlayer.exe. (Thanks Niga-san!) 4.5.4.2 Improved MMM(DCSG) checking algorithm of VGMPlay_msx.rom. (Thanks Uniskie-san!) 4.5.4.1 Improved slot checking algorithm of VGMPlay_msx.rom. (Thanks Uniskie-san!) Fixed VSIF command receive routine of VGMPlay_msx.rom. (Thanks Uniskie-san!) 4.5.4.0 Improved SCC,OPLL and OPM slot change performance for VSIF - MSX. 4.5.3.0 Supported Memory Mapped I/O for OPLL (Experimental) NOTE You need to configure ROM launcher settings (Sofarun and so on) to use the "Memory Mapped I/O for OPLL". At least you can't put ROM data on SCC cartridge. 4.5.2.0 Fixed SCC and OPLL initialization for VSIF - MSX(FTDI) I/F (Thanks Niga-san & Uniskie-san) Fixed maximum frequency for OPLL. 4.5.1.0 Re-fixed calculation of the Envelope Release point "/". You can place "/" at the end of line. Fixed SCC wave form morphing envelope value. You can specify the value up to int max. Experimentally supported OPM chips for VSIF - MSX(FTDI) I/F. Please use new VGMPlay_msx.rom. 4.5.0.0 Changed SCC, OPLL and OPM slot number property value for for VSIF - MSX(FTDI) I/F. MSX searches sound chips and configure it automatically at startup. (Thanks Niga-san) Experimentally supported OPM, DCSG and OPN2 chips for VSIF - MSX(FTDI) I/F. 4.4.4.0 Changed VSIF - MSX I/F frame format by compression frame data. Please update VGMPlay_msx.rom, too. 4.4.3.0 Improved stability of VSIF - MSX I/F for a faster machine. Please update VGMPlay_msx.rom, too. 4.4.2.0 Improved stability of VSIF - MSX I/F. Please update VGMPlay_msx.rom, too. Changed default value of FtdiClkWidth 17 to 18 for VSTI - MSX I/F. 4.4.1.0 Fixed crashing a real MSX machine when transmitting the data via VSIF. 4.4.0.0 Added RPC server feature to sound chips from your application. See the manual for details. 4.3.10.1 Added "FILT.Auto" property value for SID chips. 4.3.9.0 Added MIDI Delay Test tool. You can open the tool from [Tool] menu. 4.3.8.2 Improved MONO mode for playing legato. 4.3.8.0 Fixed importing mucom88 tone data to avoid skipping. Added Copy & Paste button to FM tone editor window for all timbre mode. Fixed MIDI I/F combobox doropdown width. Improved boot sequence of VSIF Genesis(FTDI) to avoid outputing unwanted sound. 4.3.7.0 Ignored Pitch change message for MSM5232. 4.3.6.0 Fixed(Changed) calculation of the Envelope Release point "/". The process after the Envelope Release point was completely broken. 4.3.5.0 Fixed SID FxEngine after Key off sequence. 4.3.4.0 Added Master Clock prop to SID chips and changed default clock from NTSC to PAL. 4.3.3.0 Improved performance for VSIF for SID chip. Please upload VSIF_C64.prg to your C64. 4.3.2.0 Improved performance for VSIF for SID chip. 4.3.1.0 Added SYNC, RING, TEST flags envelope FxS for SID chip. 4.3.0.0 Supported SID chip for VSIF. 4.2.0.0 Updated ymfm engine to latest. ymfm is used for OPZ, OPQ, OPN2, OPLL. Supported YM3806(aka OPQ) chip. YM3806(YM3533) is used by PORTATONE PSR-70. Fixed some minor bugs for OPM,OPZ. 4.1.3.0 Supported Media Key for midi player. 4.1.2.0 Auto move to next track when finished playing the current midi file. Temporary pause auto VGM/WAV recording function when finished playing the current midi file to split WAV/VGM file. 4.1.1.1 Suppressed annoying message dialog for OPL3 Tone Editor. 4.1.1.0 Added "Auto Rec VGM","Auto Rec WAV" button to MIDI player. Added Media List pane. 4.1.0.7 Improved VGM recording. Re-initialize registers after turning on the VGM recording feature. 4.1.0.6 Fixed VGM recording for YM2612(#18). 4.1.0.5 Fixed an error on YM2151 tone editor. 4.1.0.4 Re-supported VGM recording feature for YM2413 & YM2612. 4.1.0.3 Fixed VGM recording feature. Send register initialize commands before recording. 4.1.0.2 Fixed crashing while opening the window. 4.1.0.1 Fixed crashing some chips when adding it. 4.1.0.0 Fixed VSIF resource leak for some chips. Added supporting CMI8738(OPL3) PCIe card for YMF262. Experimental x64 Only 4.0.2.3 Re-fixed panpot of OPL family. 4.0.2.2 Fixed panpot of OPL family. 4.0.2.1 Fixed crashing on YM2151 Editor. 4.0.2.0 Added several variations of the OPLL family. YM2423, YMF281, DS1001. Added SIN/TRI/SQ/SAW wave creating buttons on a WSG editor. 4.0.1.6 Fixed MasterClock calculation for YM2151 and YM2414. MasterClock setting was not working. Fixed ScaleTuning calculation. ScaleTuning settings was not working for KeyShift settings. 4.0.1.5 Re-fixed SCCI instance disposing sequence. Please see limitation. Fixed VSIF for UART mode. 4.0.1.4 Fixed SCCI instance disposing sequence. Fixed Piano control painting status on the FM Editor. 4.0.1.3 Updated SCCI modules. 4.0.1.2 Fixed SCCI instance disposing sequence. 4.0.1.1 Fixed VSIF for MSX. The upper 2 bits of Reg #7 must be set to 10xxxxx. 4.0.1.0 Increased octave range for OPN and OPL family. Improved FM Editor ability. Multiple FM Editors can be opened. 4.0.0.4 Fixed YM2414 LR channel operation. 4.0.0.3 Fixed YM2414 LR channel operation. Fixed YM2414 initialization and deinitialization. 4.0.0.2 Fixed YM2414 Editor. MML Serialize data does not show correct values. 4.0.0.1 Fixed RP2A03 NOISE ch does not sound properly. 4.0.0.0 Removed "Experimental" from YM2414. Fixed LFOD and LFD calculation again for YM2414. Updated sample files for YM2414. Supported SPFM for YM2414. Supported KVS, LS for YM2151 and fixed KVS of YM2414. 3.9.7.3 Fixed LFOD and LFD calculation for YM2414. 3.9.7.2 Improved syx importer for YM2414 and improved sample files for YM2414. Still Experimental Fixed failing to load FxS settings 3.9.7.1 Improved YM2414 and added sample files. Still Experimental Added syx file loading feature for YM2414. 3.9.7.0 Added some useful menus. Added some features to FM Sound Editor. You can Copy/Swap operator values by dragging Serialize Values Label. If you want to swap values, press the Shift key while dragging. You can change same operator values by Shift/Ctrl key pressing. Added Graphic Equalizer property as Filter. Applied DC cutoff filter always. Reduced MAmi file size Moved properties related with MIDI to Midi Driver Settings sub property 3.9.6.1 Fixed a possible crash on startup. Supported loading Timbres from a spc file for SPC700. 3.9.6.0 Supported BRR file with loop header for SPC700. 3.9.5.0 Added Slot Assign Algorithm property to the "MIDI(Dedicated)" category. Added filter buttons to the property pane. 3.9.4.1 Fixed YM2414(OPZ)(as experimantal) LFO flags. 3.9.4.0 Added user custom timbre files for CM-32P. You can use your custom sound font by modifying the cm32p_user_internal_tone.tbl and cm32p_user_card_tone.tbl. For more details, see the file. Changed YM2612 sound engine to the "ymfm" engine. If you noticed an issue, please contact me. 3.9.3.8 Fixed YM2612 sounding not properly. 3.9.3.7 Fixed YM2612 sounding not properly after reinitialized. 3.9.3.6 Fixed crashing CM-32P(again). 3.9.3.5 Fixed MIDI instruments not accepting All Sound Off MIDI events. 3.9.3.4 Fixed crashing when set the S/W keyboard MIDI ch "B". 3.9.3.3 Fixed crashing CM-32P. Added YM2414(OPZ) as experimantal. And, added FITOM bank file reader as experimantal. 3.9.3.2 Fixed some minor bugs and refactored. Fixed a WOPL and OPL file importer. 3.9.3.1 Supported importing a OPL file to YMF262 Tone Editor. 3.9.3.0 Added Key On/Off delay time property to a Timbre property. Supported importing a WOPL file to YMF262 Tone Editor. Supported importing a OPL file to YM3812 Tone Editor. Improved YM2413 drum sounds. You can specify custom F-Num value and added enhanced drum set. Supported Generic UART for AY-3-8910 for VGMPlayer. 3.9.2.2 Fixed performance hit for VSIF Improved "Piano" control graphics. 3.9.2.1 Improved VGMPlayer & VSIF for MSX. 3.9.2.0 Updated VGMPlayer to support MSX. Fixed Mami path parsing for reading the VSTI ini file. 3.9.1.0 Improved CombinedTimbre feature. 3.9.0.0 Improved CombinedTimbre feature. Fixed some minor bug. 3.8.0.1 Fixed note name F# does not exist on the DrumTimbre.BaseNote property. ;-< ★You need to re-configure old save data if you use it.★ 3.8.0.0 Added Velocity Mapping feature. Supported VSIF for MSX. You can drive PSG, OPLL, SCC, OPL3 sound chip on the real MSX. 3.7.5.0 Supported Scale Tuning. You can set it on ScaleTuning property to the MIDI(Dedicated) category. Supported Channel After Touch MIDI event. You can set the effect on the SCCS property on a Timbre property. 3.7.4.0 Fixed Master Clock prop crashing when resetting the value to default. Supported DPCM play for Real Famicom. Added ArpMethod property for FxSettings. Supported 64bit version of the SCCI. 3.7.3.2 Fixed SoundFont loader for SPC700. Loader could not load 2nd and later samples. 3.7.3.1 Improved square wave low frequency range of VSIF - Famicom. Added function that can be cleared write cache data when Panic button pressed. 3.7.3.0 Supported VSIF for Famicom. 3.7.2.0 Ignored invalid VGM data and improved performance for VGMPlayer. Supported 115200bps for VSIF for Genesis UART mode. 3.7.1.0 Fixed the Panic button that the FM synthesizer can be stopped completely. Updated VSIF engine and added VSIF VGMPlayer. 3.7.0.0 Fixed unexpected font error on startup ( Just ignoring... ). Fixed unexpected sound stop (retry) Added VSIF sound engine to play music through Real SMS, Genesis console. 3.6.2.0 Added PanShift Envelope property to the FxS. 3.6.1.0 Added Maximize/FIR/Rand Button to the Envelope Editor Dialog. 3.6.0.1 Fixed unexpected sound stop (maybe) 3.6.0.0 Added uPD1771. 3.5.1.3 Fixed unexpected sounding in Huc6280. 3.5.1.2 Improved performance (a little) in VST mode. 3.5.1.1 Fixed unexpected error occurred while enabling SCCI in VST mode. 3.5.1.0 Supported localization for ja-JP. 3.5.0.1 Fixed crashing in POKEY. 3.5.0.0 Supported VSTi plugin mode. Use the .\VST\MAmiVSTi.dll file and edit ini file. DO NOT USE old .\MAmiVSTi.dll file. Trash it. 3.3.2.1 Fixed FxS not working in some chips. 3.3.2.0 Breaking changed SCC & FDS LFO & PCE LFO morph data table format. 3.3.1.0 Supported dynamic LFO wave form changing for the FDS and HuC6280 chip. You can change LFO wave form by "MorphEnvelops" property in the FxS settings. Updated MAME Core. 3.3.0.0 Added SN76477. Fixed double value slider could not set float value properly. 3.2.0.2 Fixed SAM icon. 3.2.0.0 Added the SAM is a TTS software for consoles of the ATARI and AMIGA. 3.1.1.0 Supported converting words to allophones for the SP0256 Chip. 3.1.0.0 Added SP0256 Chip. 3.0.0.0 Added TMS5220 Chip and preset voices. 2.9.1.1 Fixed the issue that envelope settings are not applied of AY-3-8910 and YM2608. Added SyncWithNoteFrequencyDivider property to the YM2608 (Same with AY-3-8910). 2.9.1.0 Supported the SPFM to sound on a real chip for the AY-3-8910. 2.9.0.2 Temporary fixed OPNA SSG noisy* sound (*Emulation engine only) Breaking changed OPNA SSG sound type property. 2.9.0.1 Fixed unexpected exception while sounding. 2.9.0.0 Added Master Clock property to YM2151, YM2608, YM2610B, YM2612. Supported SCCI with 64 bit version of MAmidiMEmo. However, this feature needs more CPU power. 2.8.1.1 Fixed incorrect NAMCO CUS30 waveform applying. 2.8.1.0 Updated sample sound and fixed some minor issue. 2.8.0.1 Fixed unexpected error in FM Tone Selector. 2.8.0.0 Supported *.gwi tone file for FM Synthesis Editor. Added Random button & FIR button to the WSG Editor. 2.7.1.1 Fixed YMF262 FM Synthesis editor error. 2.7.1.0 Fixed YMF262 FM Synthesis editor error. 2.7.0.0 Fixed unexpected sounding when volume changing on CUS30. 2.6.9.0 Improved new sound channel assignment algorithm. 2.6.8.0 Fixed new sound channel assignment algorithm for the Drum ch. 2.6.7.0 Fixed HOLD1 not working properly. 2.6.6.0 Fixed new sound channel assignment algorithm in the Follower mode. 2.6.5.0 Fixed & improved sound channel assignment algorithm to keep last sounding channel for YM2413 (v2.6.3.0 changes did not applied to YM2413). 2.6.4.0 Supported dynamic wave form changing for the SCC1 chip. You can change wave form by "MorphEnvelops" property in the FxS settings. Removed force dump disabling hack in FM chips. 2.6.3.0 Fixed RYTHM ch volume calculation in the YM2608 chip. Fixed SCCS, GPCS values calculation. Improved sound channel assignment algorithm to keep last sounding channel. If you does not like this, please contact me. 2.6.2.0 Turned off write cache for frequency register in the real YM2608 and YM2515 chip. 2.6.1.0 Fixed CH mode set 3 instead of 6 in YM2608. Affected only S/W emulation. 2.6.0.0 Fixed crashing when FM operators was reset. Fixed SSG tone frequency in real YM2608 chip. 2.5.9.0 Supported downloading and opening a text file from the FM tone downloading dialog. The main reason is to make sure of the license and warning messages. 2.5.8.0 Supported downloading a FM tone (In the near future, you can download other data maybe) from cloud. Thanks to DM-88-san. 2.5.7.0 Added "Dumping sound" to RHYTHM sound in YM2608 when key off received. Fixed ADPCM-B not sounding unexpectedly in YM2608. Improved ADPCM-B in YM2608 transfer speed via SCCI. Fixed SSG sounding unexpectedly when volume changing in YM2608 and YM2610B Supported GM RESET ans GS RESET SysEx message. When received, reset all MIDI parameters and off all notes. 2.5.6.0 Supported importing the MUCOM88, FMP, PMD, VOPM sound font file into the FM Timbres props. 2.5.5.0 Added tone selector dialog that shows when imported a tone file that has multiple tones. 2.5.4.0 Supported importing the MUCOM88, FMP, PMD, VOPM sound font file into the FM Synthesis Editor. Supported loading a WAV file (16bit mono) as ADPCM-B data for YM2608, YM2610B chips. 2.5.3.0 Fixed PSG sounding unexpectedly when volume changing. Supported MIDI IN B. Supported Master Volume SysEx command. Try to send "F0 7F 7F 04 01 00 nn F7" to change master volume. Fixed CUS30 Volume calculation. Added YM2608(OPNA) chip. Place legitimate ym2608_adpcm_rom.bin file in the Mami dir to play rhythm sound. Supported the SPFM to sound in real chip for YM2151 and YM2608 chips. Only 32 bit version 2.5.2.0 Supported dynamic change FM Synthesis Op.Enable value. Added FM Synthesis register value randomizer to FM Synthesis Editor. Added FM Synthesis global register to FM Synthesis Editor. 2.5.1.0 Improved MIDI file Player UI. 2.5.0.0 Added MIDI file Player tab. Supported MAmidi file that is MAmi file and midi file are archived file. To create MAmidi file, load midi file and export MAmidi file. Fixed portamento time (Almost the same as the GS module portamento time). 2.4.0.1 Improved UI. Supported basic formula for SoundControlChangeSettings and GeneralPurposeControlSettings properties. Added Data Entry slider to Piano GUI. Use a mouse wheel to change the value. Fixed freezing in MT32. Fixed key off behavior of Fx Engine. Updated MSGS.SF for CM32-P. 2.4.0.0 Added Envelope Editor. 2.3.0.2 Fixed key off ignored issue while modulation is active in OPL. Fixed to turn off modulation after key off. Applied Metro Style GUI and improved UI. 2.3.0.1 Fixed YMF262 sample file and some minor bugs. 2.3.0.0 Added YMF262(OPL3) chip. Fixed Combined Drum does not sounding properly. 2.2.5.1 Improved FM Synthesis Editor UI. 2.2.5.0 Added PCM playback feature to HuC6280. Fixed an error when opening the floating point value slider in some props. Fixed SR(Sustain Rate) is extra parameter for OPL is not affected. Added a FM Synthesis GUI Editor. 2.2.4.0 Fixed issue of modulation CC. Fixed an error in MSM5232. Improved NOISE ch freqeucncy in SN76496, GBAPU, AY8910. You can change freq by pitch change CC. Improved NOISE ch function in AY8910. 2.2.3.0 Fixed issues related with SID property. Improved sf loader for SPC700 and C140. Added ZoneID remover script. 2.2.2.0 Fixed not applying Relese Point for Envelope. Fixed sound off timing while envelope processing. Added sf2 loading feature to context menu of C140 instrument. Removed DrumTimbreTable prop from C140 and SPC700 insts (Not suitable for PCM insts). Please use DrumTimbres prop to sound drum. Improved assignment of YM2413 drum sounds. Improved YM2413 custom sound sounding algorithm. Fixed error when opening a YM2610B Timbre prop. 2.2.1.0 Fixed HuC6820 WSG sound can't delete last noise sound. 2.2.0.0 Fixed Piano GUI for CM32-P and MT-32. Fixed HuC6820 volume calculation algorithm. Fixed not saving WSG Type of NAMCO CUS30 Timbre. Fixed error when opening a YM2413 Timbre property. Added sf2 loading feature to context menu of SPC700 instrument. 2.1.0.0 Changed YM2413 engine to emu2413 engine to get more sounds accuracy. Added Tone Envelope property for YM2413 FxS settings. Added CM32-P Card #16. Added MML like serialize property to the FM Synthesis chip. Fixed FM Synthesis sounds. 2.0.4.0 Extended POLY mode control change message. You can specify the number of reserved voices. Fixed crashing on boot. 2.0.3.0 Improved sounds output timing accuracy. Supported HOLD1 control change message. 2.0.2.0 Improved MT-32 sounds output timing & latency. 2.0.1.0 Fixed crashing in some chip... 2.0.0.0 Fixed some minor bugs. Panic button sometimes does not work. SerializeData does not work and cause crash. FxS Arp does not work properly in Fixed mode. Property Reset menu does not work properly. Mono mode does not work properly. RP2A03 Tri channel is stopped by Noise channel. Specific property value does not save. Added KeyShift, PitchShift, IgnoreKeyOff prop to Timbre prop. Added Combined Timbre feature to Timbre prop. Treat patched Timbre as one Timbre. Added Follower mode feature to Timbre prop. Share voice ch with another units. Added Drum part to Timbre prop. Added Global Arpeggio Settins to Instrument prop. Added Instrument cloning menu in the instrument pane on the Main window. Exposed RP2A03 Liner Counter Length. Applied "Force Dump mode" always to FM Synthesis unit to prevent incomplete attack rate. Added virtual SR parameter to YM2413. Added sample of MAmi files. Added drag & drop feature that MAmi file can be dropped into instrument list pnae. 1.3.1.0 Added VGM supported chips. GB APU, HuC6280 1.3.0.0 Synced sound engine to MAME 0221 (May improved some sound accuracy). Added wave file output feature. Please re-open option dialog and press [OK] to commit new settings. Added VGM file separetedly output feature. Only supported the following chips. YM2151, YM2612, YM3812, YM2413, POKEY, SN76496, NES APU, AY-3-8910 1.2.1.0 Added CM-32P SN-U110-10 simulation . 1.2.0.0 Added CM-32P (This is an incomplete simulator). Using FluidLite https://github.com/divideconcept/FluidLite , Using GeneralUser GS http://schristiancollins.com/generaluser.php Fixed RPN/NRPN MIDI massages can not be handled properly. OMG. 1.1.0.0 Added MT-32 MIDI module ( imported from MUNT https://sourceforge.net/projects/munt/ ) Place legitimate MT32_CONTROL.ROM and MT32_PCM.ROM files in the Mami dir. 1.0.0.0 Added YM2610B chip. 0.9.4.2 Fixed Key ch of piano pane is not applied properly. 0.9.4.1 Fixed YM2413 serialized data could not apply properly. 0.9.4.0 Added FDS, VRC6 tone type to the NES APU. FDS, VRC6 was imported from VirtuaNES https://github.com/ivysnow/virtuanes Added HuC6280 and SPC700(RAM limit breaking) and POKEY. Fixed and changed "Partial Reserve" feature for GBA ( and HuC6280 ). 0.9.3.1 Fixed invalid portamento source note and followed portamento speed to GM2 spec. 0.9.3.0 Added alternate property editor window. That can be popup from toolbar in the Property pane. Added "Sound Control Settings" feature in Timbre settings. You can link the Sound control MIDI message value with the Timbre property value. (Also VST effects and other props, too) Added modifying receving MIDI ch for the specific instrument via NRPN MIDI Message feature. See the section No.8 of this README. Fixed arpeggio algorithm. When last one key is up, the key is not held in hold mode. Otherwise, keep arpeggio. Fixed 2nd AY8910 outputs noise, C140 panpot gain formula follows GM2 spec, some minor bugs. 0.8.0.0 Supports piano clicks by mouse. Supports Mono mode(CC#126,CC#127) almost same with FITOM 0.7.0.0 Added SID, C140(RAM limit breaking) chips, Displays Oscilloscope, Supports VST Effect plugin 0.6.1.0 Changed to new sound timer engine for perfect sound timing 0.6.0.0 Added sound driver effects and portamento feature 0.5.0.0 Added several chips 0.1.0.0 First release

*** Licenses ***

*Split700 - gocha https://github.com/gocha/split700/blob/master/LICENSE

*MathParserTK - Yerzhan Kalzhani https://github.com/kirnbas/MathParserTK

*PeakFilter - filoe https://github.com/filoe/cscore/blob/master/CSCore/DSP/PeakFilter.cs

*ymfm - Aaron Giles https://github.com/aaronsgiles/ymfm/tree/main License: BSD 3-Clause License https://github.com/aaronsgiles/ymfm/blob/main/LICENSE

*WinRing0 - hiyohiyo https://crystaldew.info/2010/02/28/winring0-end/ License: 修正 BSD ライセンス https://openlibsys.org/manual-ja/License.html

*c86ctl - honet http://c86box.com/software.html License: BSD-3-Clause license https://github.com/honet/c86ctl/blob/development/LICENSE

*oki - Copyright (c) 2001 Tetsuya Isaki. All rights reserved. http://www.pastel-flower.jp/~isaki/NetBSD/src/?sys/dev/ic/msm6258.c umjammer https://github.com/umjammer/vavi-sound/blob/master/src/main/java/vavi/sound/adpcm/oki/Oki.java

*airfont 380Final by Milton Paredes, mpj factory studios https://musical-artifacts.com/artifacts/635 License: Public Domain

*MDPlayer - kumatan https://github.com/kuma4649/MDPlayer License: MIT https://github.com/kuma4649/MDPlayer/blob/stable/LICENSE.txt

*C700 - osoumen https://github.com/osoumen/C700 License: LGPL2.1 https://github.com/osoumen/C700/blob/master/COPYING

*NAudio - Mark Heath https://github.com/naudio/NAudio License: MIT license https://github.com/naudio/NAudio?tab=MIT-1-ov-file#readme

About

MAmidiMEmo

Resources

Readme

License

View license
Activity

Stars

3 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

378 tags

Packages

No packages published

Languages

  • C++ 94.1%
  • C# 3.0%
  • C 1.6%
  • Lua 0.6%
  • Scala 0.2%
  • Python 0.2%
  • Other 0.3%