CyclonePlotter, create options to format output grid area to user-desired area #1091

j-opatz · 2021-08-18T19:52:07Z

Describe the New Feature

Guang Ping discovered that the current build of CyclonePlotter does not allow for an area-focused output. Instead, the script hard-codes the entire globe output, regardless of where the storm tracks actually occur (ex. Atlantic Basin only).
The new feature desired would be to allow users to input a area of focus, either by a lower left lat/lon point and total gridpoints in the x and y directions, or by a 4-point grid domain.

Acceptance Testing

For testing purposes, I've acquired a GFS global trak file from Guang Ping. It's located on Seneca, under /d1/projects/METplus/METplus_Data/development/feature_1091
A successful feature upgrade to CyclonePlotter will result in a .png output that is focused on a user-defined area, rather than global.

Time Estimate

More input on this is needed from the engineer

Sub-Issues

Consider breaking the new feature down into sub-issues.

Setup config file to allow user to determine whether to use a global extent or define lons and lats defining a
region
Set up plotting in cartopy to set the extent
Set up wrapper code to support further filtering of data to only those points that lie within the user-specified region/extent

Relevant Deadlines

This ties into ongoing work with the GFDL tracker and extra-TC tracking capabilities

Funding Source

2788881

Define the Metadata

Assignee

Select engineer(s) or no engineer required
Select scientist(s) or no scientist required

Labels

Select component(s)
Select priority
Select requestor(s)

Projects and Milestone

Select Repository and/or Organization level Project(s) or add alert: NEED PROJECT ASSIGNMENT label
Select Milestone as the next official version or Future Versions

Define Related Issue(s)

Consider the impact to the other METplus components.

METplus, MET, METdatadb, METviewer, METexpress, METcalcpy, METplotpy

New Feature Checklist

See the METplus Workflow for details.

The text was updated successfully, but these errors were encountered:

…erest and replace deprecated cartopy attributes.

…ox defining the area of interest to plot.

…e area of interest to plot.

Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT

… interest to be plotted.

… config file to serve as example for plotting a specific area of the map.

* Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map.

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: bikegeek <minnawin@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: j-opatz <59586397+j-opatz@users.noreply.github.com> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: j-opatz <jopatz@ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping * Feature 1230 stratosphere metrics (#1354) * Initial checkin for Meridial Mean use case * Changed the name and directories * Added some documentation * Fixed config variables * Issue 1230 Stratospheric metrics (zonal/meridional use case) put INPUT_BASE in the user_env_vars so the user doesn't need to set the INPUT_BASE environment in the current working shell * Issue #1230 remove import of metplotpy-this isn't called * Issue #1230_stratosphere_metric Add use case to the list of use cases to be run for testing * Issue 1230 Remove the INPUT_BASE from the user_env_vars section * Issue #1230 redundant files * Issue #1230 redundant files * Issue #1230 redundant files * Issue #120 replace INPUT_BASE with INPUT_FILE_NAME * Issue #1230 remove entry for INPUT_FILE_NAME, this goes in the system.conf * Update all_use_cases.txt Copy and pasted #11 from s2s use case for the Stratosphere use case but forgot to update the index to 12. * Update use_case_groups.json added use case #12 from s2s to test stratosphere use case * Issue #1230 put INPUT_FILE_NAME back under the user_env_vars * Issue #1230 forgot to include the filename * Issue #1230 clean up config file, remove uneccessary comments, group related entries in the user_env_vars * Issue #1230 remove extraneous and incorrect path to the input_filename setting * Removed pingouin dependency * Issue #1230 another cut and paste error fixed for the Stratosphere use case * Issue #1230 type in name, obs_Only should be obsOnly * Issue #1230 added the metdatadb to the env, code imports metdatadb and may require some of these dependencies * issue #1230 removed pingouin dependency from comment to reduce any confusion * issue #1230 turn off the test for the Stratosphere metrics use case * Added use case image Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: j-opatz <59586397+j-opatz@users.noreply.github.com> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: j-opatz <jopatz@ucar.edu> Co-authored-by: Hank Fisher <fisherh@ucar.edu> Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping * Feature 1230 stratosphere metrics (#1354) * Initial checkin for Meridial Mean use case * Changed the name and directories * Added some documentation * Fixed config variables * Issue 1230 Stratospheric metrics (zonal/meridional use case) put INPUT_BASE in the user_env_vars so the user doesn't need to set the INPUT_BASE environment in the current working shell * Issue #1230 remove import of metplotpy-this isn't called * Issue #1230_stratosphere_metric Add use case to the list of use cases to be run for testing * Issue 1230 Remove the INPUT_BASE from the user_env_vars section * Issue #1230 redundant files * Issue #1230 redundant files * Issue #1230 redundant files * Issue #120 replace INPUT_BASE with INPUT_FILE_NAME * Issue #1230 remove entry for INPUT_FILE_NAME, this goes in the system.conf * Update all_use_cases.txt Copy and pasted #11 from s2s use case for the Stratosphere use case but forgot to update the index to 12. * Update use_case_groups.json added use case #12 from s2s to test stratosphere use case * Issue #1230 put INPUT_FILE_NAME back under the user_env_vars * Issue #1230 forgot to include the filename * Issue #1230 clean up config file, remove uneccessary comments, group related entries in the user_env_vars * Issue #1230 remove extraneous and incorrect path to the input_filename setting * Removed pingouin dependency * Issue #1230 another cut and paste error fixed for the Stratosphere use case * Issue #1230 type in name, obs_Only should be obsOnly * Issue #1230 added the metdatadb to the env, code imports metdatadb and may require some of these dependencies * issue #1230 removed pingouin dependency from comment to reduce any confusion * issue #1230 turn off the test for the Stratosphere metrics use case * Added use case image Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> * Corrected spelling of occurrence in two places * Fixed misspelling of occurrence * Found and fixed two more misspellings of occurence * Changed version specific information to by X.Y.Z moved text indicating to click save to the bottom of the list. * Feature 1374 python packages (#1378) * Added documentation about updating spreadsheet of Python requirements * Changed references to master_metplus.py to run_metplus.py * Fixed formatting of section with run_metplus.py commands * Updated text for updating the spreadsheet * Removed a newly added section that wasn't needed Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * feature 1368 PCPCombine use zero accum (#1381) * feature 1369 grid_weight_flag in EnsembleStat (#1379) * Per #1356, change how wrappers create instances of other wrappers to ensure that config settings for the created instance do not change values in METplusConfig used by the rest of the wrappers, ci-run-all-diff * Per #1356, remove config_overrides functionality in favor of using instances -- this prevents the issue where overrides for a given tool affect the global config settings. it also forces the configs to override for an instance to be put into another config section so that it will be available in the final conf, ci-run-all-diff * Per #1356, update documentation to reflect changes * Per #1356, fixed unit test to no longer use deprecated approach to overriding config variables * feature 1247 climatology settings (#1385) * feature 1356 isolate config (#1386) * Feature 675 Continuous Integration Documentation (#1409) Co-authored-by: johnhg <johnhg@ucar.edu> * feature 1382 Filename templates in MODEL (#1414) * Feature 1289 explicit file list (#1387) * Per PR #1387 review, fix typo * Bugfix 1421 EnsembleStat use fcst fields in ens dictionary if ens is unset (#1422) * fixed missing path change for docker file path * removed variables that are not used * Feature 1408 use case ptype (#1425) * adding imagery, config file, updating internal tests * updated lists, auto testing * corrected old reference * Update use_case_groups.json Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: bikegeek <minnawin@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: Hank Fisher <fisherh@ucar.edu> Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping * Feature 1230 stratosphere metrics (#1354) * Initial checkin for Meridial Mean use case * Changed the name and directories * Added some documentation * Fixed config variables * Issue 1230 Stratospheric metrics (zonal/meridional use case) put INPUT_BASE in the user_env_vars so the user doesn't need to set the INPUT_BASE environment in the current working shell * Issue #1230 remove import of metplotpy-this isn't called * Issue #1230_stratosphere_metric Add use case to the list of use cases to be run for testing * Issue 1230 Remove the INPUT_BASE from the user_env_vars section * Issue #1230 redundant files * Issue #1230 redundant files * Issue #1230 redundant files * Issue #120 replace INPUT_BASE with INPUT_FILE_NAME * Issue #1230 remove entry for INPUT_FILE_NAME, this goes in the system.conf * Update all_use_cases.txt Copy and pasted #11 from s2s use case for the Stratosphere use case but forgot to update the index to 12. * Update use_case_groups.json added use case #12 from s2s to test stratosphere use case * Issue #1230 put INPUT_FILE_NAME back under the user_env_vars * Issue #1230 forgot to include the filename * Issue #1230 clean up config file, remove uneccessary comments, group related entries in the user_env_vars * Issue #1230 remove extraneous and incorrect path to the input_filename setting * Removed pingouin dependency * Issue #1230 another cut and paste error fixed for the Stratosphere use case * Issue #1230 type in name, obs_Only should be obsOnly * Issue #1230 added the metdatadb to the env, code imports metdatadb and may require some of these dependencies * issue #1230 removed pingouin dependency from comment to reduce any confusion * issue #1230 turn off the test for the Stratosphere metrics use case * Added use case image Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> * Corrected spelling of occurrence in two places * Fixed misspelling of occurrence * Found and fixed two more misspellings of occurence * Changed version specific information to by X.Y.Z moved text indicating to click save to the bottom of the list. * Feature 1374 python packages (#1378) * Added documentation about updating spreadsheet of Python requirements * Changed references to master_metplus.py to run_metplus.py * Fixed formatting of section with run_metplus.py commands * Updated text for updating the spreadsheet * Removed a newly added section that wasn't needed Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * feature 1368 PCPCombine use zero accum (#1381) * feature 1369 grid_weight_flag in EnsembleStat (#1379) * Per #1356, change how wrappers create instances of other wrappers to ensure that config settings for the created instance do not change values in METplusConfig used by the rest of the wrappers, ci-run-all-diff * Per #1356, remove config_overrides functionality in favor of using instances -- this prevents the issue where overrides for a given tool affect the global config settings. it also forces the configs to override for an instance to be put into another config section so that it will be available in the final conf, ci-run-all-diff * Per #1356, update documentation to reflect changes * Per #1356, fixed unit test to no longer use deprecated approach to overriding config variables * feature 1247 climatology settings (#1385) * feature 1356 isolate config (#1386) * Feature 675 Continuous Integration Documentation (#1409) Co-authored-by: johnhg <johnhg@ucar.edu> * feature 1382 Filename templates in MODEL (#1414) * Feature 1289 explicit file list (#1387) * Per PR #1387 review, fix typo * Bugfix 1421 EnsembleStat use fcst fields in ens dictionary if ens is unset (#1422) * fixed missing path change for docker file path * removed variables that are not used * Feature 1408 use case ptype (#1425) * adding imagery, config file, updating internal tests * updated lists, auto testing * corrected old reference * Update use_case_groups.json * only trigger testing workflow for pull requests that are going into develop or main_* branches * Feature 1371 blocking wr (#1426) * turn off use cases for push events * Feature 1392 climo_cdf.direct_prob and SeriesAnalysis (#1396) * Changed event triggering rules for documentation workflow so that it will run for pull requests even if no files in the docs directory have changed. A recent pull request passed but develop failed after it was approved because files that were referenced in the use case documentation files had been deleted as part of the PR. * feature 1273 TCGen -edeck and -shape (#1424) * Feature 966 Fix mask.poly logic (#1430) * Feature 1030 total seconds documentation (#1428) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * get branch name in job controls job * replace logic to update input data volumes with call to dtcenter/metplus-action-data-update action * feature 1431 remove obs_prepbufr_map (#1433) * Per #675, added images and updated content * added statsmodel package to metplotpy docker conda environment * Added fcst_file_type to two wrappers (#1437) Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added release notes for tasks that have already been completed for beta6 * updated env var for METplotpy base to match changes made to the METplotpy repository * Updated METplotpy base env var to preemptively match changes from PR dtcenter/METplotpy#197. Once that PR is merged into develop, a test workflow will run that should fix this issue. * removed commented code that is no longer used * update the instructions for updating test input data to ensure volume_mount_directories file is updated in the upcoming version directory, i.e. v4.1, so that the Docker data volumes from the release will be created properly * removed duplicate script * updated script to copy volume_mount_directories file into new METplus version directory * added logic to skip files that are temporary copies of tar files that should not be added to new version directory * updated release guide instructions for creating METplus data directory for next development cycle * Feature 911 tc trackint (#1439) Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added new use cases that are currently being reviewed to release notes * updated event info in contributor's guide * Feature 626 fix hovmoeller documentation (#1444) * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py replace hovmoeller_diagram.conf with UserScript_obsPrecip_obsOnly_Hovmoeller.conf * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py Removed a typo: UserScript This uses data from... Now: This uses data from... * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py * Modified the PR template to add review of the source issue metadata ci-skip-all * feature_1403_python_components_table (#1446) * creating new METplus Components Python Requirements * adding a return to test * testing use case links * testing use case links #2 * testing use case links #3 * testing use case links #4 * Filling in some use cases * fixing indentation #1403 * fixing indentation #1403 take 2 * fixing indentation #1403 take 3 * cleaning up anything after # in the links #1403 * entries thru D #1403 * entries thru H #1403 * fixing indents #1403 * fixing indents #1403 take 2 * fixing web name #1403 * entries thru L #1403 * entry matplotlib #1403 * entry matplotlib #1403 marking duplicate names * entry metcalcpy #1403 * entry metcalcpy fix indents #1403 * entry matplotlib #1403 fixing duplicate names * entry metplotpy #1403 * entry metplotpy #1403 marking duplicate names * entry metplotpy #1403 fixing * entry thru ps #1403 * double names #1403 * character fix #1403 * adding in missing links #1403 * thru pyproj #1403 * problem with line 353 #1403 * thru pyproj #1403 typos * more duplicate names #1403 * line break #1403 * loose ends #1403 * adding >= to some of the versions #1403 * adding name to the Use Cases to avoid duplicate naming issues TEST #1403 * adding name to the Use Cases to avoid duplicate naming issues thru pyproj #1403 * adding thru pyresample #1403 * fixing pyresample typo #1403 * adding thru scikit-image #1403 * fixing line breaks#1403 * web links thru scikit-learn #1403 * web links thru scipy #1403 * web links thru sklearn #1403 * Duplicate web names. temp. fix #1403 * Duplicate web names fixed #1403 * Duplicate web names fixing #3 #1403 * Duplicate web names fixing #4 #1403 * Duplicate web names fixing #5 #1403 * table end #1403 * table loose ends #1403 * Removed unnecessary comma * table loose ends after pull request #1403 * Minor modifications to METplus Component column * Changed description of pyproj * Added link for last referenced use case * Attempting to fix doc warning Co-authored-by: jprestop <jpresto@ucar.edu> * Feature 1318 usecase aviso (#1440) * Correct small typo. * Update pull_request_template.md * Added files for ReadTheDocs (#864) * Updated documentation links for ReadtheDocs * Update pull_request_template.md Added entry for completion date for pull request review. * Adding python embedding script to read AVISO, RTOFS, HYCOM and OSTIA data * Updated the script - working but only RMSE values match * Adding documentation for the AVISO case * Adding a conf file for the AVISO case * Updates to the codel to include model3, obs, climo3 but also has many extra print statements, netcdf output files which needs to be cleaned * Cleaning up the conf file and adding SAL1L2 to get the model_climo sdev and obs_climo sdev * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Adding an image to the use case. Image Courtesy: EMC/NOAA website * added to use case list * updated case description * removed merge issues * caught second docs issue * removed other doc merge issues, turned off auto test * more merge comments sneaking in Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: bikegeek <minnawin@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: Hank Fisher <fisherh@ucar.edu> Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping * Feature 1230 stratosphere metrics (#1354) * Initial checkin for Meridial Mean use case * Changed the name and directories * Added some documentation * Fixed config variables * Issue 1230 Stratospheric metrics (zonal/meridional use case) put INPUT_BASE in the user_env_vars so the user doesn't need to set the INPUT_BASE environment in the current working shell * Issue #1230 remove import of metplotpy-this isn't called * Issue #1230_stratosphere_metric Add use case to the list of use cases to be run for testing * Issue 1230 Remove the INPUT_BASE from the user_env_vars section * Issue #1230 redundant files * Issue #1230 redundant files * Issue #1230 redundant files * Issue #120 replace INPUT_BASE with INPUT_FILE_NAME * Issue #1230 remove entry for INPUT_FILE_NAME, this goes in the system.conf * Update all_use_cases.txt Copy and pasted #11 from s2s use case for the Stratosphere use case but forgot to update the index to 12. * Update use_case_groups.json added use case #12 from s2s to test stratosphere use case * Issue #1230 put INPUT_FILE_NAME back under the user_env_vars * Issue #1230 forgot to include the filename * Issue #1230 clean up config file, remove uneccessary comments, group related entries in the user_env_vars * Issue #1230 remove extraneous and incorrect path to the input_filename setting * Removed pingouin dependency * Issue #1230 another cut and paste error fixed for the Stratosphere use case * Issue #1230 type in name, obs_Only should be obsOnly * Issue #1230 added the metdatadb to the env, code imports metdatadb and may require some of these dependencies * issue #1230 removed pingouin dependency from comment to reduce any confusion * issue #1230 turn off the test for the Stratosphere metrics use case * Added use case image Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> * Corrected spelling of occurrence in two places * Fixed misspelling of occurrence * Found and fixed two more misspellings of occurence * Changed version specific information to by X.Y.Z moved text indicating to click save to the bottom of the list. * Feature 1374 python packages (#1378) * Added documentation about updating spreadsheet of Python requirements * Changed references to master_metplus.py to run_metplus.py * Fixed formatting of section with run_metplus.py commands * Updated text for updating the spreadsheet * Removed a newly added section that wasn't needed Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * feature 1368 PCPCombine use zero accum (#1381) * feature 1369 grid_weight_flag in EnsembleStat (#1379) * Per #1356, change how wrappers create instances of other wrappers to ensure that config settings for the created instance do not change values in METplusConfig used by the rest of the wrappers, ci-run-all-diff * Per #1356, remove config_overrides functionality in favor of using instances -- this prevents the issue where overrides for a given tool affect the global config settings. it also forces the configs to override for an instance to be put into another config section so that it will be available in the final conf, ci-run-all-diff * Per #1356, update documentation to reflect changes * Per #1356, fixed unit test to no longer use deprecated approach to overriding config variables * feature 1247 climatology settings (#1385) * feature 1356 isolate config (#1386) * Feature 675 Continuous Integration Documentation (#1409) Co-authored-by: johnhg <johnhg@ucar.edu> * feature 1382 Filename templates in MODEL (#1414) * Feature 1289 explicit file list (#1387) * Per PR #1387 review, fix typo * Bugfix 1421 EnsembleStat use fcst fields in ens dictionary if ens is unset (#1422) * fixed missing path change for docker file path * removed variables that are not used * Feature 1408 use case ptype (#1425) * adding imagery, config file, updating internal tests * updated lists, auto testing * corrected old reference * Update use_case_groups.json * only trigger testing workflow for pull requests that are going into develop or main_* branches * Feature 1371 blocking wr (#1426) * turn off use cases for push events * Feature 1392 climo_cdf.direct_prob and SeriesAnalysis (#1396) * Changed event triggering rules for documentation workflow so that it will run for pull requests even if no files in the docs directory have changed. A recent pull request passed but develop failed after it was approved because files that were referenced in the use case documentation files had been deleted as part of the PR. * feature 1273 TCGen -edeck and -shape (#1424) * Feature 966 Fix mask.poly logic (#1430) * Feature 1030 total seconds documentation (#1428) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * get branch name in job controls job * replace logic to update input data volumes with call to dtcenter/metplus-action-data-update action * feature 1431 remove obs_prepbufr_map (#1433) * Per #675, added images and updated content * added statsmodel package to metplotpy docker conda environment * Added fcst_file_type to two wrappers (#1437) Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added release notes for tasks that have already been completed for beta6 * updated env var for METplotpy base to match changes made to the METplotpy repository * Updated METplotpy base env var to preemptively match changes from PR dtcenter/METplotpy#197. Once that PR is merged into develop, a test workflow will run that should fix this issue. * removed commented code that is no longer used * update the instructions for updating test input data to ensure volume_mount_directories file is updated in the upcoming version directory, i.e. v4.1, so that the Docker data volumes from the release will be created properly * removed duplicate script * updated script to copy volume_mount_directories file into new METplus version directory * added logic to skip files that are temporary copies of tar files that should not be added to new version directory * updated release guide instructions for creating METplus data directory for next development cycle * Feature 911 tc trackint (#1439) Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added new use cases that are currently being reviewed to release notes * updated event info in contributor's guide * Feature 626 fix hovmoeller documentation (#1444) * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py replace hovmoeller_diagram.conf with UserScript_obsPrecip_obsOnly_Hovmoeller.conf * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py Removed a typo: UserScript This uses data from... Now: This uses data from... * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py * Modified the PR template to add review of the source issue metadata ci-skip-all * feature_1403_python_components_table (#1446) * creating new METplus Components Python Requirements * adding a return to test * testing use case links * testing use case links #2 * testing use case links #3 * testing use case links #4 * Filling in some use cases * fixing indentation #1403 * fixing indentation #1403 take 2 * fixing indentation #1403 take 3 * cleaning up anything after # in the links #1403 * entries thru D #1403 * entries thru H #1403 * fixing indents #1403 * fixing indents #1403 take 2 * fixing web name #1403 * entries thru L #1403 * entry matplotlib #1403 * entry matplotlib #1403 marking duplicate names * entry metcalcpy #1403 * entry metcalcpy fix indents #1403 * entry matplotlib #1403 fixing duplicate names * entry metplotpy #1403 * entry metplotpy #1403 marking duplicate names * entry metplotpy #1403 fixing * entry thru ps #1403 * double names #1403 * character fix #1403 * adding in missing links #1403 * thru pyproj #1403 * problem with line 353 #1403 * thru pyproj #1403 typos * more duplicate names #1403 * line break #1403 * loose ends #1403 * adding >= to some of the versions #1403 * adding name to the Use Cases to avoid duplicate naming issues TEST #1403 * adding name to the Use Cases to avoid duplicate naming issues thru pyproj #1403 * adding thru pyresample #1403 * fixing pyresample typo #1403 * adding thru scikit-image #1403 * fixing line breaks#1403 * web links thru scikit-learn #1403 * web links thru scipy #1403 * web links thru sklearn #1403 * Duplicate web names. temp. fix #1403 * Duplicate web names fixed #1403 * Duplicate web names fixing #3 #1403 * Duplicate web names fixing #4 #1403 * Duplicate web names fixing #5 #1403 * table end #1403 * table loose ends #1403 * Removed unnecessary comma * table loose ends after pull request #1403 * Minor modifications to METplus Component column * Changed description of pyproj * Added link for last referenced use case * Attempting to fix doc warning Co-authored-by: jprestop <jpresto@ucar.edu> * Feature 1318 usecase aviso (#1440) * Correct small typo. * Update pull_request_template.md * Added files for ReadTheDocs (#864) * Updated documentation links for ReadtheDocs * Update pull_request_template.md Added entry for completion date for pull request review. * Adding python embedding script to read AVISO, RTOFS, HYCOM and OSTIA data * Updated the script - working but only RMSE values match * Adding documentation for the AVISO case * Adding a conf file for the AVISO case * Updates to the codel to include model3, obs, climo3 but also has many extra print statements, netcdf output files which needs to be cleaned * Cleaning up the conf file and adding SAL1L2 to get the model_climo sdev and obs_climo sdev * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Adding an image to the use case. Image Courtesy: EMC/NOAA website * added to use case list * updated case description * removed merge issues * caught second docs issue * removed other doc merge issues, turned off auto test * more merge comments sneaking in Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: bikegeek <minnawin@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: j-opatz <59586397+j-opatz@users.noreply.github.com> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: j-opatz <jopatz@ucar.edu> Co-authored-by: Hank Fisher <fisherh@ucar.edu> Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu>

* Feature 1091 extent cycloneplotter (#1218) * Github #1091 add support to define plot's extent * Github #1091 Add support for defining plot's extent * Github #1091 add support for defining plot extent * GitHub #1091 Provide support to define plotting a bounding box of interest and replace deprecated cartopy attributes. * Github Issue #1091 Add configuration support to define the bounding box defining the area of interest to plot. * Github Issue #1091 provide support to define bounding box defining the area of interest to plot. * Github Issue #1091 Removed unused shapely imports * GItHub Issue #1091 Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT * Github #1091 Include config settings needed to indicate the region of interest to be plotted. * Github Issue #1091 Keep only the North Hemisphere lon and lats in the config file to serve as example for plotting a specific area of the map. * convert file back to unix format via dos2unix and added change that was lost in merge * return None from function instead of exiting so that METplus clean up functionality will still run * fixed indentation * fixed indentation - for loop should not be nested inside other for loop * fixed check for failure in retrieve_data function * feature 1223 error if file not found (#1238) * feature 1252 allow dictionary value for time_summary.width (#1253) * feature 1213 obs_quality_inc/exc (#1260) * Feature 1203 ioda2nc (#1262) * Add default title for the new use case issue template. * Feature 1019 harmonic preprocessing (#1272) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Feature 1266 gen ens prod missing ensembles (#1275) * Feature 1049 statistics list (#1271) * first attempt at a table #1049 * 2nd attempt, smaller, different formatting table #1049 * trying to get rid of git error message by adding this to the index #1049 * alignment #1049 * trying to text wrap in a table #1049 * attempting to create text wrapping in tables #1049 * removing role, trying to wrap text #1049 * removing html break, trying to wrap text #1049 * adding code to wrap text #1049 * removing code to wrap text #1049 * fixing naming typo #1049 * hitting returns in table #1049 * removing typo file, removing line breaks #1049 * attempting a simple table for text wrapping #1049 * attempting to bold header row in simple table #1049 * simple table line break attempt #1049 * simple table line break attempt #2 #1049 * simple table line break attempt #3 #1049 * trying another | #1049 * 2 trying another | #1049 * 3 trying another | #1049 * trying a blank line #1049 * trying reformating grid #1049 * 2 trying reformating grid #1049 * 3 trying reformating grid #1049 * 4 trying reformating grid #1049 * adding in one more table row #1049 * adding more text #1049 * trying glossary format #1049 * 2 trying glossary format #1049 * 3 trying glossary format #1049 * 4 trying glossary format #1049 * adding glossary format 2D objects #1049 * fixing glossary format 2D objects #1049 * adding glossary items #1049 * fixing glossary format #1049 * hopefully all examples are working #1049 * changing reference to tool * removing 2D object examples * removing the unwrapped table * adding ACC into the example * fixing formatting #1049 * fixing formatting take 2 #1049 * fixing formatting take 3 #1049 * bolding and language change #1049 * fixing spacing #1049 * fixing spacing again #1049 * changing title #1049 * trying superscript #1049 * superscript glossary #1049 * removing quotes #1049 * fixing spacing #1049 * Tara has decided to go with the glossary format. Removing table example. #1049 * Adding 2D objects #1049 * 2D objects fix #1049 * 2D objects fix attempt 2 #1049 * 2D objects fix attempt 3 #1049 * 2D objects fix attempt 4 #1049 * 2D objects fix attempt 5 #1049 * 2D objects fix attempt 7 #1049 * 2D objects fix attempt 8 #1049 * ABR added #1049 * adding remaining AB items to list #1049 * adding remaining ACC_ items to list #1049 * ADLAND & AFSS entries #1049 * A entries #1049 * fixing formatting #1049 * fixing formatting #2 #1049 * removing new entries to make it run #1049 * adding a couple back in #1049 * adding a couple more back in #1049 * tool key at the bottom #1049 * spacing changes #1049 * spacing changes another try #1049 * fixing spacing #1049 * fixing spacing attempt 2 #1049 * fixing spacing attempt 3 #1049 * through AREA items #1049 * AMODEL listed twice but it's not #1049 * AMODEL listed twice but it's not #2 #1049 * AMODEL added question marks so it will run #1049 * final A entries #1049 * naming the glossary statistics in hopes of not conflicting with original glossary #1049 * removing glossary statistics space #1049 * Testing multiple glossary names * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, working on attempts to have multiple glossaries with the same term * Per #1067, removing code with attempts at mutiple glossaries * Per #1067, adding back three question marks due to duplicate term * paring down list, adding a table for review * problems with table * still trying to get it to publish * still trying to get a second line in the table * still trying to get a second line in the table 2 * testing different formatting * testing different formatting * trying to comment out the glossary inner workings * formatting again * line breaks in table #1049 * adding in some more for an example #1049 * adding new entries in through AREA #1049 * fixing line breaks #1049 * fixing line breaks #1049 #2 * fixing line breaks and warning messages #1049 * fixing line breaks #1049 * adding AREA_RATIO through ASPECT_DIFF * fixing typo #1049 * fixing typo #1049 * fixing typo #1049 take 2 * adding AXIS_ANG to BCMSE #1049 * adding spacing #1049 * adding spacing removing commas #1049 * removing comma #1049 * BOUNDARY_DIST thru BSS_SMPL #1049 * BOUNDARY_DIST splitting across 2 lines #1049 * cleaning up typos #1049 * calibration thru centriod_dist #1049 * centriod_lat thru centroid_y #1049 * fixing spacing #1049 * removing test glossary #1049 * climo_mean thru crtk_err #1049 * fixing crtk_err spacing #1049 * fixing spacing #1049 * CSI to CURVATURE_Y #1049 * CURVATURE_X & Y spacing #1049 * DEV_CAT to DURATION_DIFF #1049 * EC_VALUE to F #1049 * F_RATE TO FBS #1049 * Fixing spacing #1049 * fcst_clus thru fcst_conv_radius #1049 * removing CTOP_PRS #1049 * fixing the order of tools for FBAR and FBIAS #1049 * fixing spacing #1049 * adding grid-stat to all point-stat entries #1049 * adding fixing spacing #1049 * adding fixing spacing take 2 #1049 * adding fixing spacing take 3 #1049 * adding fixing spacing take 4 #1049 * adding fixing spacing take 5 #1049 * adding fixing spacing take 6 #1049 * adding fixing spacing take 7 #1049 * fixing spacing with a period take 7 #1049 * first attempt fcst_ #1049 * fixing typos #1049 * thru FOBAR #1049 * thru end of F #1049 * g thru h #1049 * i thru intensity #s #1049 * fixing typos #1049 * capturing example for Julie #1049 * thru k #1049 * fixing typos #1049 * thru L #1049 * thru MG #1049 * thru N_ENS #1049 * thru all N #1049 * fixing FBIAS alignment #1049 * fixing ME and MSE alignment #1049 * fixing ME alignment take 2 #1049 * thru OBS_E #1049 * fixing alignment #1049 * fixing alignment n_thresh #1049 * thru OBS_thresh #1049 * thru O #1049 * fixing OOBAR formating #1049 * thru PR_CORR #1049 * commented lines out with line total info #1049 * commented lines out with line total info take 2 #1049 * thru R #1049 * thru SPEED #1049 * thru S #1049 * thru T #1049 * thru U #1049 * thru V #1049 * thru V #1049 * thru Z #1049 * Update statistics_list.rst Tara is testing editing in UI * Update statistics_list.rst Updates through the A's * Update statistics_list.rst Cleaning up the A's * Update statistics_list.rst Standardizing MODE and MTD entries * Update statistics_list.rst Updating B's and C's * Update statistics_list.rst Testing adding TC-Stat and TCST to an entry * Update statistics_list.rst Clean up of a few A-Cs and then update of Ds * Update statistics_list.rst A few clean-ups and Es * Update statistics_list.rst Halfway through Fs... * Update statistics_list.rst A little clean up and the rest of Fs * Update statistics_list.rst G, H, I, Ks * Update statistics_list.rst L, M, Ns * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst A little clean-up and Os * Update statistics_list.rst Rs * Update statistics_list.rst S and Ts * Update statistics_list.rst The rest of the list * Update statistics_list.rst Removed Attr from Stat Type thru E * Update statistics_list.rst Remove Attr from Statistics Type through Gs * Update statistics_list.rst Remove Attr from Statistic Type through Rs * Update statistics_list.rst Remove Attr from Stat Type to the end * Update statistics_list.rst Cleaned up some Line Type typos * Update statistics_list.rst Still more Attr cleanup Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> * Feature 1263 v4.1.0 beta4 (#1277) * update version to note development towards beta5 * Feature 934 release stage doc (#1235) * Per #934 add stages of the METplus release cycle. * Per #934, adding link to descriptions of the release cycle in the User's Guide. * Per #934, made corrections * Per #934, changed Beta and Release Candidate (rc) from bold to subsubsections. * Update index.rst Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * Feature 344 met util refactor (#1292) * removed deprecated sections from config examples * minor change to METplus release guide to add a link to the PDF of the User's Guide instead of downloading it and attaching it to the release * Feature 1285 extract tiles mtd times (#1315) * Feature 896 more met config (#1322) * removed incorrect search keyword * added workflow_dispatch event so workflow can be triggered by an external repository such as MET to test to ensure that changes from that repo will break anything in METplus * added another input argument for workflow_dispatch event * added job with name that shows the event name or the repository name if triggered by an external repository such as MET * GHA: add username that triggered external event to event info job name * added required input argument for external trigger that contains the commit hash of the push event that triggered in the other repo * change event info to show commit hash instead of username that merged the PR * changed input names to match names of event in repository that triggered workflow * feature 1320 OMP_NUM_THREADS (#1338) * Feature 1183 memory documentation (#1340) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * add email address of user who triggered push event to job name * Feature 1166 series analysis field info (#1353) * Feature 1116 usecase smos (#1348) Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * turn off new use case from every push * feature 1236 Control Members in EnsembleStat and GenEnsProd (#1357) * added optional argument to change the directory to untar new input data into so the same Dockerfile can be used to add data for other METplus components such as MET * feature 1358 v4.1.0-beta5 release (#1359) * update version for next development cycle * Feature 1216 usecase smap (#1361) * Adding a conf file for SMAP * Adding a directory to host the read file * Removing temp file * Updated the valid dates to match Todd's code * Adding documentation for SMAP case * Updates the valis dates to match Todd's code * Removing a tmp file * Typo in file name * Updating the input RTOFS to have the init time instead of the valid time ii the file name * updated file paths, tesing * updated use case descriptions, rearranged use case group testing * put new use case into its own group so that the diff logic can evaluate marine_and_cryosphere:3. The truth data for 3-4 does not exist yet so the diff fails. Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * updated marine_and_cryo grouping * Feature 1230 stratosphere metrics (#1354) * Initial checkin for Meridial Mean use case * Changed the name and directories * Added some documentation * Fixed config variables * Issue 1230 Stratospheric metrics (zonal/meridional use case) put INPUT_BASE in the user_env_vars so the user doesn't need to set the INPUT_BASE environment in the current working shell * Issue #1230 remove import of metplotpy-this isn't called * Issue #1230_stratosphere_metric Add use case to the list of use cases to be run for testing * Issue 1230 Remove the INPUT_BASE from the user_env_vars section * Issue #1230 redundant files * Issue #1230 redundant files * Issue #1230 redundant files * Issue #120 replace INPUT_BASE with INPUT_FILE_NAME * Issue #1230 remove entry for INPUT_FILE_NAME, this goes in the system.conf * Update all_use_cases.txt Copy and pasted #11 from s2s use case for the Stratosphere use case but forgot to update the index to 12. * Update use_case_groups.json added use case #12 from s2s to test stratosphere use case * Issue #1230 put INPUT_FILE_NAME back under the user_env_vars * Issue #1230 forgot to include the filename * Issue #1230 clean up config file, remove uneccessary comments, group related entries in the user_env_vars * Issue #1230 remove extraneous and incorrect path to the input_filename setting * Removed pingouin dependency * Issue #1230 another cut and paste error fixed for the Stratosphere use case * Issue #1230 type in name, obs_Only should be obsOnly * Issue #1230 added the metdatadb to the env, code imports metdatadb and may require some of these dependencies * issue #1230 removed pingouin dependency from comment to reduce any confusion * issue #1230 turn off the test for the Stratosphere metrics use case * Added use case image Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> * Corrected spelling of occurrence in two places * Fixed misspelling of occurrence * Found and fixed two more misspellings of occurence * Changed version specific information to by X.Y.Z moved text indicating to click save to the bottom of the list. * Feature 1374 python packages (#1378) * Added documentation about updating spreadsheet of Python requirements * Changed references to master_metplus.py to run_metplus.py * Fixed formatting of section with run_metplus.py commands * Updated text for updating the spreadsheet * Removed a newly added section that wasn't needed Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> * feature 1368 PCPCombine use zero accum (#1381) * feature 1369 grid_weight_flag in EnsembleStat (#1379) * Per #1356, change how wrappers create instances of other wrappers to ensure that config settings for the created instance do not change values in METplusConfig used by the rest of the wrappers, ci-run-all-diff * Per #1356, remove config_overrides functionality in favor of using instances -- this prevents the issue where overrides for a given tool affect the global config settings. it also forces the configs to override for an instance to be put into another config section so that it will be available in the final conf, ci-run-all-diff * Per #1356, update documentation to reflect changes * Per #1356, fixed unit test to no longer use deprecated approach to overriding config variables * feature 1247 climatology settings (#1385) * feature 1356 isolate config (#1386) * Feature 675 Continuous Integration Documentation (#1409) Co-authored-by: johnhg <johnhg@ucar.edu> * feature 1382 Filename templates in MODEL (#1414) * Feature 1289 explicit file list (#1387) * Per PR #1387 review, fix typo * Bugfix 1421 EnsembleStat use fcst fields in ens dictionary if ens is unset (#1422) * fixed missing path change for docker file path * removed variables that are not used * Feature 1408 use case ptype (#1425) * adding imagery, config file, updating internal tests * updated lists, auto testing * corrected old reference * Update use_case_groups.json * only trigger testing workflow for pull requests that are going into develop or main_* branches * Feature 1371 blocking wr (#1426) * turn off use cases for push events * Feature 1392 climo_cdf.direct_prob and SeriesAnalysis (#1396) * Changed event triggering rules for documentation workflow so that it will run for pull requests even if no files in the docs directory have changed. A recent pull request passed but develop failed after it was approved because files that were referenced in the use case documentation files had been deleted as part of the PR. * feature 1273 TCGen -edeck and -shape (#1424) * Feature 966 Fix mask.poly logic (#1430) * Feature 1030 total seconds documentation (#1428) Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_WeatherRegime.py * Update UserScript_fcstGFS_obsERA_Blocking.py * Update UserScript_obsERA_obsOnly_Blocking.py * Update UserScript_obsERA_obsOnly_WeatherRegime.py * get branch name in job controls job * replace logic to update input data volumes with call to dtcenter/metplus-action-data-update action * feature 1431 remove obs_prepbufr_map (#1433) * Per #675, added images and updated content * added statsmodel package to metplotpy docker conda environment * Added fcst_file_type to two wrappers (#1437) Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added release notes for tasks that have already been completed for beta6 * updated env var for METplotpy base to match changes made to the METplotpy repository * Updated METplotpy base env var to preemptively match changes from PR dtcenter/METplotpy#197. Once that PR is merged into develop, a test workflow will run that should fix this issue. * removed commented code that is no longer used * update the instructions for updating test input data to ensure volume_mount_directories file is updated in the upcoming version directory, i.e. v4.1, so that the Docker data volumes from the release will be created properly * removed duplicate script * updated script to copy volume_mount_directories file into new METplus version directory * added logic to skip files that are temporary copies of tar files that should not be added to new version directory * updated release guide instructions for creating METplus data directory for next development cycle * Feature 911 tc trackint (#1439) Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> * added new use cases that are currently being reviewed to release notes * updated event info in contributor's guide * Feature 626 fix hovmoeller documentation (#1444) * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py replace hovmoeller_diagram.conf with UserScript_obsPrecip_obsOnly_Hovmoeller.conf * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py Removed a typo: UserScript This uses data from... Now: This uses data from... * Update UserScript_obsPrecip_obsOnly_Hovmoeller.py * Modified the PR template to add review of the source issue metadata ci-skip-all * feature_1403_python_components_table (#1446) * creating new METplus Components Python Requirements * adding a return to test * testing use case links * testing use case links #2 * testing use case links #3 * testing use case links #4 * Filling in some use cases * fixing indentation #1403 * fixing indentation #1403 take 2 * fixing indentation #1403 take 3 * cleaning up anything after # in the links #1403 * entries thru D #1403 * entries thru H #1403 * fixing indents #1403 * fixing indents #1403 take 2 * fixing web name #1403 * entries thru L #1403 * entry matplotlib #1403 * entry matplotlib #1403 marking duplicate names * entry metcalcpy #1403 * entry metcalcpy fix indents #1403 * entry matplotlib #1403 fixing duplicate names * entry metplotpy #1403 * entry metplotpy #1403 marking duplicate names * entry metplotpy #1403 fixing * entry thru ps #1403 * double names #1403 * character fix #1403 * adding in missing links #1403 * thru pyproj #1403 * problem with line 353 #1403 * thru pyproj #1403 typos * more duplicate names #1403 * line break #1403 * loose ends #1403 * adding >= to some of the versions #1403 * adding name to the Use Cases to avoid duplicate naming issues TEST #1403 * adding name to the Use Cases to avoid duplicate naming issues thru pyproj #1403 * adding thru pyresample #1403 * fixing pyresample typo #1403 * adding thru scikit-image #1403 * fixing line breaks#1403 * web links thru scikit-learn #1403 * web links thru scipy #1403 * web links thru sklearn #1403 * Duplicate web names. temp. fix #1403 * Duplicate web names fixed #1403 * Duplicate web names fixing #3 #1403 * Duplicate web names fixing #4 #1403 * Duplicate web names fixing #5 #1403 * table end #1403 * table loose ends #1403 * Removed unnecessary comma * table loose ends after pull request #1403 * Minor modifications to METplus Component column * Changed description of pyproj * Added link for last referenced use case * Attempting to fix doc warning Co-authored-by: jprestop <jpresto@ucar.edu> * Feature 1318 usecase aviso (#1440) * Correct small typo. * Update pull_request_template.md * Added files for ReadTheDocs (#864) * Updated documentation links for ReadtheDocs * Update pull_request_template.md Added entry for completion date for pull request review. * Adding python embedding script to read AVISO, RTOFS, HYCOM and OSTIA data * Updated the script - working but only RMSE values match * Adding documentation for the AVISO case * Adding a conf file for the AVISO case * Updates to the codel to include model3, obs, climo3 but also has many extra print statements, netcdf output files which needs to be cleaned * Cleaning up the conf file and adding SAL1L2 to get the model_climo sdev and obs_climo sdev * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Updating the file to fix the standard names and add the model3, climo3 and obs3 * Adding an image to the use case. Image Courtesy: EMC/NOAA website * added to use case list * updated case description * removed merge issues * caught second docs issue * removed other doc merge issues, turned off auto test * more merge comments sneaking in Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> * Revert "Feature 1318 usecase aviso (#1440)" (#1459) This reverts commit d3021de. Co-authored-by: bikegeek <3753118+bikegeek@users.noreply.github.com> Co-authored-by: bikegeek <minnawin@ucar.edu> Co-authored-by: George McCabe <23407799+georgemccabe@users.noreply.github.com> Co-authored-by: johnhg <johnhg@ucar.edu> Co-authored-by: Christina Kalb <kalb@ucar.edu> Co-authored-by: lisagoodrich <33230218+lisagoodrich@users.noreply.github.com> Co-authored-by: Julie Prestopnik <jpresto@seneca.rap.ucar.edu> Co-authored-by: TaraJensen <jensen@ucar.edu> Co-authored-by: jprestop <jpresto@ucar.edu> Co-authored-by: Mrinal Biswas <biswas@ucar.edu> Co-authored-by: Hank Fisher <fisherh@ucar.edu> Co-authored-by: Hank Fisher <fisherh@kiowa.rap.ucar.edu> Co-authored-by: Minna Win <minnawin@kiowa.rap.ucar.edu> Co-authored-by: Christina Kalb <kalb@kiowa.rap.ucar.edu> Co-authored-by: Hank Fisher <fisherh@seneca.rap.ucar.edu> Co-authored-by: Mrinal Biswas <biswas@seneca.rap.ucar.edu>

j-opatz added this to the METplus-4.1.0 milestone Aug 18, 2021

j-opatz assigned bikegeek and j-opatz Aug 18, 2021

j-opatz changed the title ~~CyclonePlotter, ability to focus on user-desired map area~~ CyclonePlotter, create options to format output grid area to user-desired area Aug 19, 2021

TaraJensen removed the alert: NEED ACCOUNT KEY Need to assign an account key to this issue label Oct 8, 2021

bikegeek added a commit that referenced this issue Oct 20, 2021

Github #1091 add support to define plot's extent

7dc7f0c

bikegeek added a commit that referenced this issue Oct 20, 2021

Github #1091 Add support for defining plot's extent

e930f82

bikegeek added a commit that referenced this issue Oct 20, 2021

Github #1091 add support for defining plot extent

42c7d1f

bikegeek added a commit that referenced this issue Oct 22, 2021

GitHub #1091 Provide support to define plotting a bounding box of int…

890c3f4

…erest and replace deprecated cartopy attributes.

bikegeek added a commit that referenced this issue Oct 22, 2021

Github Issue #1091 Add configuration support to define the bounding b…

7be5e32

…ox defining the area of interest to plot.

bikegeek added a commit that referenced this issue Oct 22, 2021

Github Issue #1091 provide support to define bounding box defining th…

db6ab40

…e area of interest to plot.

bikegeek added a commit that referenced this issue Oct 22, 2021

Github Issue #1091 Removed unused shapely imports

eeb80bf

bikegeek linked a pull request Oct 22, 2021 that will close this issue

Feature 1091 extent cycloneplotter #1218

Merged

12 tasks

bikegeek added a commit that referenced this issue Oct 22, 2021

GItHub Issue #1091

d0dc530

Removed duplicate CYCLONE_PLOTTER_GLOBAL_PLOT

bikegeek added a commit that referenced this issue Oct 22, 2021

Github #1091 Include config settings needed to indicate the region of…

d60a69d

… interest to be plotted.

bikegeek added a commit that referenced this issue Oct 27, 2021

Github Issue #1091 Keep only the North Hemisphere lon and lats in the…

c09a716

… config file to serve as example for plotting a specific area of the map.

bikegeek added a commit that referenced this issue Oct 27, 2021

Github Issue #1091 Merge branch 'develop-ref' into develop

fa40cca

georgemccabe closed this as completed Nov 16, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

CyclonePlotter, create options to format output grid area to user-desired area #1091

CyclonePlotter, create options to format output grid area to user-desired area #1091

j-opatz commented Aug 18, 2021 •

edited by bikegeek

Loading

CyclonePlotter, create options to format output grid area to user-desired area #1091

CyclonePlotter, create options to format output grid area to user-desired area #1091

Comments

j-opatz commented Aug 18, 2021 • edited by bikegeek Loading

Describe the New Feature

Acceptance Testing

Time Estimate

Sub-Issues

Relevant Deadlines

Funding Source

Define the Metadata

Assignee

Labels

Projects and Milestone

Define Related Issue(s)

New Feature Checklist

j-opatz commented Aug 18, 2021 •

edited by bikegeek

Loading