huawei-router-api

A wrapper to connect with and query the API on the Huawei 4G routers (notably the Huawei B315) and any other supporting models.

Installation

npm install dialog-router-api --save

Notes

I was messing about with the web-admin panel of the router and found that it was merely a client side web-page/site that communicates with a backend API via AJAX requests.

There's a lot more to the router's API than just the ones I've been able to provide here, Some of the functions of API require you to login, and currently this doesn't seem to work at all with mine, even with the offical Huawei Android App. (router is locked down by Dialog? Different firmware?) thanks to Rolf Sormo for his implementation of the login feature, it seems to work.

Thanks to Henrik S Pedersen and Hacker Ramblings for posting their findings on the internet.

Usage

  var router = require('dialog-router-api').create({
    gateway: '192.168.8.1'
    // The IP address of your router, can be found by doing
    // ipconfig on windows or netstat -r on linux (right under 'Gateway')
  });

  router.getToken(function(error, token) {
    router.getBasicSettings(token, function(error, response){
      console.log(response);
    });
  });

API

getToken(error, token)

Responds with a token and a cookie used by the following methods to authenticate and communicate with the API.

{ cookies: 'SessionID=nOintv3yIw1utMbHCcZh063IcJKtcV4rVAoSBDNTc+NJIixBN7ukOg8MSaGf+Fck2uiBmmozJ5go63Hs8/wm44ySCrluICP6rsmzVvFzJHXFmrMm4NV0fi8NmJk+QVHY',
  token: '34/Z8of05pVMyK7+SL81x6XgWx28r/ny'
}

login(token, username, password, callback)

Logins in to the router with the provided credentials.

getMonthStatistics(token, callback)

Responds with the monthly statistics (as shown on the admin dashboard of the router).

{
  CurrentMonthDownload: [ '5222230621' ],
  // in bytes
  CurrentMonthUpload: [ '302853159' ],
  // in bytes
  MonthDuration: [ '209127' ],
  // in seconds, I assume
  MonthLastClearTime: [ '2016-2-16' ]
  // in light-years (jk)
}

getCurrentPLMN

Should respond with the Public Land Mobile Network Information, but in my case, it does not.

{
  State: [ '0' ],
  FullName: [ '41311' ],
  ShortName: [ '41311' ],
  Numeric: [ '41311' ],
  // What the fuck?
  Rat: [ '7' ]
}

getSignal(token, callback)

Responds with the signal strengths of the router

{
  pci: [ '367' ],
  sc: [ '' ],
  cell_id: [ '292609' ],
  rsrq: [ '-7dB' ],
  rsrp: [ '-93dBm' ],
  rssi: [ '-65dBm' ],
  sinr: [ '14dB' ],
  rscp: [ '' ],
  ecio: [ '' ],
  mode: [ '7' ]
}

getStatus(token, callback)

Responds with the basic status information of the router.

{
  ConnectionStatus: [ '901' ],
  WifiConnectionStatus: [ '' ],
  SignalStrength: [ '' ],
  SignalIcon: [ '4' ],
  CurrentNetworkType: [ '19' ],
  CurrentServiceDomain: [ '2' ],
  RoamingStatus: [ '0' ],
  BatteryStatus: [ '' ],
  BatteryLevel: [ '' ],
  BatteryPercent: [ '' ],
  simlockStatus: [ '0' ],
  WanIPAddress: [ '' ],
  WanIPv6Address: [ '' ],
  PrimaryDns: [ '' ],
  SecondaryDns: [ '' ],
  PrimaryIPv6Dns: [ '' ],
  SecondaryIPv6Dns: [ '' ],
  CurrentWifiUser: [ '1' ],
  TotalWifiUser: [ '32' ],
  currenttotalwifiuser: [ '32' ],
  ServiceStatus: [ '2' ],
  SimStatus: [ '1' ],
  WifiStatus: [ '1' ],
  CurrentNetworkTypeEx: [ '101' ],
  maxsignal: [ '5' ],
  wifiindooronly: [ '0' ],
  wififrequence: [ '0' ],
  classify: [ 'cpe' ],
  flymode: [ '0' ],
  cellroam: [ '1' ],
  voice_busy: [ '0' ]
}

getTrafficStatistics(token, callback)

Reponds with the total traffic statistics of the router.

{
  CurrentConnectTime: [ '7994' ],
  CurrentUpload: [ '7534237' ],
  CurrentDownload: [ '69825936' ],
  CurrentDownloadRate: [ '64' ],
  CurrentUploadRate: [ '130' ],
  TotalUpload: [ '304369972' ],
  TotalDownload: [ '5243043843' ],
  TotalConnectTime: [ '215501' ],
  showtraffic: [ '1' ]
}

getBasicSettings(token, callback)

Responds with the basic settings of the router.

{ WifiSsid: [ 'Dialog 4G' ],
  WifiChannel: [ '6' ],
  WifiHide: [ '1' ],
  WifiCountry: [ 'US' ],
  WifiMode: [ 'b/g/n' ],
  WifiRate: [ '0' ],
  WifiTxPwrPcnt: [ '100' ],
  WifiMaxAssoc: [ '32' ],
  WifiEnable: [ '1' ],
  WifiFrgThrshld: [ '2346' ],
  WifiRtsThrshld: [ '2347' ],
  WifiDtmIntvl: [ '1' ],
  WifiBcnIntvl: [ '100' ],
  WifiWme: [ '1' ],
  WifiPamode: [ '0' ],
  WifiIsolate: [ '0' ],
  WifiProtectionmode: [ '1' ],
  Wifioffenable: [ '1' ],
  Wifiofftime: [ '600' ],
  wifibandwidth: [ '0' ],
  wifiautocountryswitch: [ '0' ],
  wifiantennanum: [ '2' ],
  wifiguestofftime: [ '0' ],
  WifiRestart: [ '0' ] }

Tests

HUAWEI_GW_IP=192.168.8.1 HUAWEI_GW_PASSWORD=abc123 HUAWEI_GW_USERNAME=admin npm test

You most likely need to set your device IP and the admin credentials on the command-line like in this example.

Contributing

In lieu of a formal styleguide, take care to maintain the existing coding style. Add unit tests for any new or changed functionality. Lint and test your code.

Contributors

• Rolf Sormo

Bugs

Plenty. If you find any, please do let me know. I also don't mind pull-requests, so if you want to contribute, please do. c:

Release History

• 0.1.0 Initial release