Left Console MCAD File Directory Changes. #284
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This is an ABSIS Bus Master which utilizes a 4-pin power in from the pit PSU, and 3x MAX487 chips to drive three RS485 buses. The data and power buses have been combined into a six pin bus. This PCB is a shield for an Arduino Mega 2560 R3.
Created ABSIS Nano 2.0 template Adjusted ECAD files structure Added ABSIS Nano 2.0 project
Had old template. Updated Mega template to R3 arduino mega. Redid Bus Master.
Remove Bus Enable jumpers. Change schematic BUS Connectors to match PCB order. (Cosmetic change.) Consider if fusing is required. Add power planes. - Changed front plane to 12V_Supply, since other voltages should have fairly low downstream amperage draws comparatively. Fix adjacent pin bridges. (Move out from direct bridge to "U" bridge.) Add silkscreen box to write reference designator on the PCB.
Change schematic BUS Connectors to match PCB order. (Cosmetic change.) Consider if fusing is required. - Fusing not required due to protected PSU output to bus. Add power planes. - Added 12V plane on back plane. Fix adjacent pin bridges. (Move out from direct bridge to "U" bridge.) Add silkscreen box to write reference designator on the PCB
ABSIS NANO 2.0
Cosmetic tweaks to Master Schematic Updated Nano template with correct J1/J2 schematic pinouts.
Added Bus Master JLCPCB gerbers, smd assy files. Added Bus Master BOM. Added JLCPCB SMD BOM generator and OpenHornet BOM generator. PROTIP: Have a bunch of single row and double row 2.54mm (.100") breakaway headers handy for everything ABSIS.
Verified via JPCPCB Also BOM.
Added schematic and layout for the ABSIS Backlight controller, which consists of 12 PWM channels to control single pin addressable RGB LEDs. Testing will be accomplished to find limits of each channel power-wise. Created empty project for ABSIS Mega.
Changed connectors to minifits and increased conductor count for PWR in.
Its still not placing the SMD components correctly. Will fix.
Added ABSIS Mega Added 3D connectors to all ABSIS PCBs
Added Spreadsheet to track OH I/O Requirements (Don't know where my old one went. Dangit.) Renamed "OLD" PCB folder to obsolete. Do not use anything in the obsolete folder except for reference.
-Need to review vias on larger tracks
Added symbol library for ABSIS PCBs and blank OH interconnect.
As per John's notes: -4-Layer Board Now -Relative Paths -Add Schematic template.
Added OpenHornet Silkscreening. Added CC-BY-NC silkscreen. Added filter capacitors for 90% of the LEDs. Added Ground plane on the rear. Added +5V plane on the front. Changed from Micro-Fit to Mini-Fit Jr. 2x2 Connectors. Changed Pin assignment to: 1. +5V 2. +5V 3. GND 4. DATA IN/OUT Removed personal copyright
Left Console Backlighting ECAD
UFC Updates, Switch Bats and Drawings Complete,
Removed the .STEP.SLDPRT files and replaced them with clean .SLDPRT files.
L-Walker
added
Category: ECAD
L-Walker
added
the
Type: Bug/Obsolesce
added 4 commits
January 5, 2021 14:34
|
Pushed to wrong branch. Push from new branch to ABSIS_2.0 branch. |
Updates to the Gear Panel legend plate, inboard and outboard spacers and addition of backlight knob areas.
- Gear Panel Legend Plate Changes #285 - Left Console Knob backlighting additions #290 - Left Tweaks to outboard spacer for the EXT Lights panel to accommodate the Connectors. - Added the backlighting PCB to KY58 and accompanying changes of the panel sandwich screws to .625" - Added inlaid cutout to the in and Outboard KY58 Spacers to allow PCB to drop on-top without making panel sit proud. - Addition of cable routing cutout in the gear mechanism for the backlighting PCB connectors. - Changed the Master Arm panel spacer to accommodate the switches and backlighting PCB connectors.
Re-designed the Legend plate and added a light and legend plate to the assembly.
Left Console Updates For Backlighting
Preflight Mode re-added and text sizes resized.
GND Power Panel Update
GND Power Panel Update
… is composed by two digits. added a spreadsheet to calculate the characters.
jrsteensen
approved these changes
Feb 1, 2021
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Removed the .STEP.SLDPRT files of the left console PCB MCAD Files. Replaced them with clean .SLDPRT files and placed them into the repo directory, not a local desktop location.
Updated all of the panel Solidworks assemblies with the replacement files.
Type of change
Please delete options that are not relevant:
How Has This Been Tested?
Test Configuration:
Checklist:
MCAD: