Probleme de pas du moteur #40
-
|
|
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 13 replies
-
|
Dilan, looks like your 3rd picture wasn't fully uploaded, please re-attach it. So from what I understand, your problem is that you expected the cross-slide to move 2.53mm but it only moved 1mm? You need to get the following data from your hardware:
Once you have these numbers, fill them in https://github.com/kachurovskiy/nanoels/blob/main/h1/NanoEls.ino#L6-L8 and re-upload the sketch to your Arduino. Cheers! |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
Looks great, well done! 🥳🎉 |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Je vous enverrai d'autres photo pour mettre sur le github si possible en exemple de build merci |
Beta Was this translation helpful? Give feedback.
-
|
Marquage Boite (2).docx Il faut l'imprimer a l'échelle 1:1 si problème me contacter a la suite de se message merci |
Beta Was this translation helpful? Give feedback.
Dilan, looks like your 3rd picture wasn't fully uploaded, please re-attach it.
So from what I understand, your problem is that you expected the cross-slide to move 2.53mm but it only moved 1mm? You need to get the following data from your hardware:
Once you have these numbers, fill them in https://github.com/kachurovskiy/nanoels/blob/main/h1/NanoEls.ino#L6-L8 and re-upload the sketch to your Arduino.
Cheers!