capebus: Geiger Cape config bugfixs #3

mranostay · 2012-11-19T06:32:48Z

The display of 'vsense-name' default is incorrect.

Signed-off-by: Matt Ranostay mranostay@gmail.com

The display of 'vsense-name' default is incorrect. Signed-off-by: Matt Ranostay <mranostay@gmail.com>

koenkooi · 2012-11-19T10:17:13Z

This is a machine generated repo, so any changed should be done against https://github.com/beagleboard/kernel/

…S block during isolation for migration commit 0bf380b upstream. When isolating for migration, migration starts at the start of a zone which is not necessarily pageblock aligned. Further, it stops isolating when COMPACT_CLUSTER_MAX pages are isolated so migrate_pfn is generally not aligned. This allows isolate_migratepages() to call pfn_to_page() on an invalid PFN which can result in a crash. This was originally reported against a 3.0-based kernel with the following trace in a crash dump. PID: 9902 TASK: d47aecd0 CPU: 0 COMMAND: "memcg_process_s" #0 [d72d3ad0] crash_kexec at c028cfdb #1 [d72d3b24] oops_end at c05c5322 #2 [d72d3b38] __bad_area_nosemaphore at c0227e60 #3 [d72d3bec] bad_area at c0227fb6 #4 [d72d3c00] do_page_fault at c05c72ec #5 [d72d3c80] error_code (via page_fault) at c05c47a4 EAX: 00000000 EBX: 000c0000 ECX: 00000001 EDX: 00000807 EBP: 000c0000 DS: 007b ESI: 00000001 ES: 007b EDI: f3000a80 GS: 6f50 CS: 0060 EIP: c030b15a ERR: ffffffff EFLAGS: 00010002 #6 [d72d3cb4] isolate_migratepages at c030b15a #7 [d72d3d1] zone_watermark_ok at c02d26cb #8 [d72d3d2c] compact_zone at c030b8de #9 [d72d3d68] compact_zone_order at c030bba1 torvalds#10 [d72d3db4] try_to_compact_pages at c030bc84 torvalds#11 [d72d3ddc] __alloc_pages_direct_compact at c02d61e7 torvalds#12 [d72d3e08] __alloc_pages_slowpath at c02d66c7 torvalds#13 [d72d3e78] __alloc_pages_nodemask at c02d6a97 torvalds#14 [d72d3eb8] alloc_pages_vma at c030a845 torvalds#15 [d72d3ed4] do_huge_pmd_anonymous_page at c03178eb torvalds#16 [d72d3f00] handle_mm_fault at c02f36c6 torvalds#17 [d72d3f30] do_page_fault at c05c70ed torvalds#18 [d72d3fb0] error_code (via page_fault) at c05c47a4 EAX: b71ff000 EBX: 00000001 ECX: 00001600 EDX: 00000431 DS: 007b ESI: 08048950 ES: 007b EDI: bfaa3788 SS: 007b ESP: bfaa36e0 EBP: bfaa3828 GS: 6f50 CS: 0073 EIP: 080487c8 ERR: ffffffff EFLAGS: 00010202 It was also reported by Herbert van den Bergh against 3.1-based kernel with the following snippet from the console log. BUG: unable to handle kernel paging request at 01c00008 IP: [<c0522399>] isolate_migratepages+0x119/0x390 *pdpt = 000000002f7ce001 *pde = 0000000000000000 It is expected that it also affects 3.2.x and current mainline. The problem is that pfn_valid is only called on the first PFN being checked and that PFN is not necessarily aligned. Lets say we have a case like this H = MAX_ORDER_NR_PAGES boundary | = pageblock boundary m = cc->migrate_pfn f = cc->free_pfn o = memory hole H------|------H------|----m-Hoooooo|ooooooH-f----|------H The migrate_pfn is just below a memory hole and the free scanner is beyond the hole. When isolate_migratepages started, it scans from migrate_pfn to migrate_pfn+pageblock_nr_pages which is now in a memory hole. It checks pfn_valid() on the first PFN but then scans into the hole where there are not necessarily valid struct pages. This patch ensures that isolate_migratepages calls pfn_valid when necessary. Reported-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Tested-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e5851da upstream. Remove spinlock as atomic_t can be used instead. Note we use only 16 lower bits, upper bits are changed but we impilcilty cast to u16. This fix possible deadlock on IBSS mode reproted by lockdep: ================================= [ INFO: inconsistent lock state ] 3.4.0-wl+ #4 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] {IN-SOFTIRQ-W} state was registered at: [<c04978ab>] __lock_acquire+0x47b/0x1050 [<c0498504>] lock_acquire+0x84/0xf0 [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib] [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib] [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211] [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211] [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211] [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211] [<c0782e87>] dev_hard_start_xmit+0x307/0x660 [<c079bb71>] sch_direct_xmit+0xa1/0x1e0 [<c0784bb3>] dev_queue_xmit+0x183/0x730 [<c078c27a>] neigh_resolve_output+0xfa/0x1e0 [<c07b436a>] ip_finish_output+0x24a/0x460 [<c07b4897>] ip_output+0xb7/0x100 [<c07b2d60>] ip_local_out+0x20/0x60 [<c07e01ff>] igmpv3_sendpack+0x4f/0x60 [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330 [<c04520fc>] run_timer_softirq+0x15c/0x2f0 [<c0449e3e>] __do_softirq+0xae/0x1e0 irq event stamp: 1838043 hardirqs last enabled at (1838043): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0 hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0 softirqs last enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0 softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&intf->seqlock)->rlock); <Interrupt> lock(&(&intf->seqlock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:2/30374: #0: (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #1: ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #2: (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211] #3: (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib] stack backtrace: Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4 Call Trace: [<c04962a6>] print_usage_bug+0x1f6/0x220 [<c0496a12>] mark_lock+0x2c2/0x300 [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0 [<c04978ec>] __lock_acquire+0x4bc/0x1050 [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0 [<c0777fb6>] ? copy_skb_header+0x26/0x90 [<c0498504>] lock_acquire+0x84/0xf0 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib] [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib] [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib] [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib] [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211] [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211] [<c0496ab4>] ? mark_held_locks+0x64/0xc0 [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50 [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211] [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211] [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10 [<c077683b>] ? skb_dequeue+0x4b/0x70 [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211] [<c045cf99>] ? process_one_work+0x109/0x3f0 [<c045d015>] process_one_work+0x185/0x3f0 [<c045cf99>] ? process_one_work+0x109/0x3f0 [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211] [<c045ed86>] worker_thread+0x116/0x270 [<c045ec70>] ? manage_workers+0x1e0/0x1e0 [<c0462f64>] kthread+0x84/0x90 [<c0462ee0>] ? __init_kthread_worker+0x60/0x60 [<c083d382>] kernel_thread_helper+0x6/0x10 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

…condition commit 26c1917 upstream. When holding the mmap_sem for reading, pmd_offset_map_lock should only run on a pmd_t that has been read atomically from the pmdp pointer, otherwise we may read only half of it leading to this crash. PID: 11679 TASK: f06e8000 CPU: 3 COMMAND: "do_race_2_panic" #0 [f06a9dd8] crash_kexec at c049b5ec #1 [f06a9e2c] oops_end at c083d1c2 #2 [f06a9e40] no_context at c0433ded #3 [f06a9e64] bad_area_nosemaphore at c043401a #4 [f06a9e6c] __do_page_fault at c0434493 #5 [f06a9eec] do_page_fault at c083eb45 #6 [f06a9f04] error_code (via page_fault) at c083c5d5 EAX: 01fb470c EBX: fff35000 ECX: 00000003 EDX: 00000100 EBP: 00000000 DS: 007b ESI: 9e201000 ES: 007b EDI: 01fb4700 GS: 00e0 CS: 0060 EIP: c083bc14 ERR: ffffffff EFLAGS: 00010246 #7 [f06a9f38] _spin_lock at c083bc14 #8 [f06a9f44] sys_mincore at c0507b7d #9 [f06a9fb0] system_call at c083becd start len EAX: ffffffda EBX: 9e200000 ECX: 00001000 EDX: 6228537f DS: 007b ESI: 00000000 ES: 007b EDI: 003d0f00 SS: 007b ESP: 62285354 EBP: 62285388 GS: 0033 CS: 0073 EIP: 00291416 ERR: 000000da EFLAGS: 00000286 This should be a longstanding bug affecting x86 32bit PAE without THP. Only archs with 64bit large pmd_t and 32bit unsigned long should be affected. With THP enabled the barrier() in pmd_none_or_trans_huge_or_clear_bad() would partly hide the bug when the pmd transition from none to stable, by forcing a re-read of the *pmd in pmd_offset_map_lock, but when THP is enabled a new set of problem arises by the fact could then transition freely in any of the none, pmd_trans_huge or pmd_trans_stable states. So making the barrier in pmd_none_or_trans_huge_or_clear_bad() unconditional isn't good idea and it would be a flakey solution. This should be fully fixed by introducing a pmd_read_atomic that reads the pmd in order with THP disabled, or by reading the pmd atomically with cmpxchg8b with THP enabled. Luckily this new race condition only triggers in the places that must already be covered by pmd_none_or_trans_huge_or_clear_bad() so the fix is localized there but this bug is not related to THP. NOTE: this can trigger on x86 32bit systems with PAE enabled with more than 4G of ram, otherwise the high part of the pmd will never risk to be truncated because it would be zero at all times, in turn so hiding the SMP race. This bug was discovered and fully debugged by Ulrich, quote: ---- [..] pmd_none_or_trans_huge_or_clear_bad() loads the content of edx and eax. 496 static inline int pmd_none_or_trans_huge_or_clear_bad(pmd_t *pmd) 497 { 498 /* depend on compiler for an atomic pmd read */ 499 pmd_t pmdval = *pmd; // edi = pmd pointer 0xc0507a74 <sys_mincore+548>: mov 0x8(%esp),%edi ... // edx = PTE page table high address 0xc0507a84 <sys_mincore+564>: mov 0x4(%edi),%edx ... // eax = PTE page table low address 0xc0507a8e <sys_mincore+574>: mov (%edi),%eax [..] Please note that the PMD is not read atomically. These are two "mov" instructions where the high order bits of the PMD entry are fetched first. Hence, the above machine code is prone to the following race. - The PMD entry {high|low} is 0x0000000000000000. The "mov" at 0xc0507a84 loads 0x00000000 into edx. - A page fault (on another CPU) sneaks in between the two "mov" instructions and instantiates the PMD. - The PMD entry {high|low} is now 0x00000003fda38067. The "mov" at 0xc0507a8e loads 0xfda38067 into eax. ---- Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3cf003c upstream. Jian found that when he ran fsx on a 32 bit arch with a large wsize the process and one of the bdi writeback kthreads would sometimes deadlock with a stack trace like this: crash> bt PID: 2789 TASK: f02edaa0 CPU: 3 COMMAND: "fsx" #0 [eed63cbc] schedule at c083c5b3 #1 [eed63d80] kmap_high at c0500ec8 #2 [eed63db] cifs_async_writev at f7fabcd7 [cifs] #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs] #4 [eed63e50] do_writepages at c04f3e32 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a #6 [eed63ea4] filemap_fdatawrite at c04e1b3e #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs] #8 [eed63ecc] do_sync_write at c052d202 #9 [eed63f74] vfs_write at c052d4ee torvalds#10 [eed63f94] sys_write at c052df4c torvalds#11 [eed63fb0] ia32_sysenter_target at c0409a98 EAX: 00000004 EBX: 00000003 ECX: abd73b73 EDX: 012a65c6 DS: 007b ESI: 012a65c6 ES: 007b EDI: 00000000 SS: 007b ESP: bf8db178 EBP: bf8db1f8 GS: 0033 CS: 0073 EIP: 40000424 ERR: 00000004 EFLAGS: 00000246 Each task would kmap part of its address array before getting stuck, but not enough to actually issue the write. This patch fixes this by serializing the marshal_iov operations for async reads and writes. The idea here is to ensure that cifs aggressively tries to populate a request before attempting to fulfill another one. As soon as all of the pages are kmapped for a request, then we can unlock and allow another one to proceed. There's no need to do this serialization on non-CONFIG_HIGHMEM arches however, so optimize all of this out when CONFIG_HIGHMEM isn't set. Reported-by: Jian Li <jiali@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f torvalds#10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e torvalds#11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f torvalds#12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad torvalds#13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 torvalds#14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a torvalds#15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 torvalds#16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b torvalds#17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 torvalds#18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c torvalds#19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 torvalds#20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 torvalds#21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] torvalds#22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] torvalds#23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 torvalds#24 [ffff8810343bfee8] kthread at ffffffff8108dd96 torvalds#25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit 89d7ae3 ] As reported by Alan Cox, and verified by Lin Ming, when a user attempts to add a CIPSO option to a socket using the CIPSO_V4_TAG_LOCAL tag the kernel dies a terrible death when it attempts to follow a NULL pointer (the skb argument to cipso_v4_validate() is NULL when called via the setsockopt() syscall). This patch fixes this by first checking to ensure that the skb is non-NULL before using it to find the incoming network interface. In the unlikely case where the skb is NULL and the user attempts to add a CIPSO option with the _TAG_LOCAL tag we return an error as this is not something we want to allow. A simple reproducer, kindly supplied by Lin Ming, although you must have the CIPSO DOI #3 configure on the system first or you will be caught early in cipso_v4_validate(): #include <sys/types.h> #include <sys/socket.h> #include <linux/ip.h> #include <linux/in.h> #include <string.h> struct local_tag { char type; char length; char info[4]; }; struct cipso { char type; char length; char doi[4]; struct local_tag local; }; int main(int argc, char **argv) { int sockfd; struct cipso cipso = { .type = IPOPT_CIPSO, .length = sizeof(struct cipso), .local = { .type = 128, .length = sizeof(struct local_tag), }, }; memset(cipso.doi, 0, 4); cipso.doi[3] = 3; sockfd = socket(AF_INET, SOCK_DGRAM, 0); #define SOL_IP 0 setsockopt(sockfd, SOL_IP, IP_OPTIONS, &cipso, sizeof(struct cipso)); return 0; } CC: Lin Ming <mlin@ss.pku.edu.cn> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit bea6832 upstream. On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: - Adjust filename - Most conversions in the original code are implicit] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit f1b5c99 upstream. The ZTE (Vodafone) K5006-Z use the following interface layout: 00 DIAG 01 secondary 02 modem 03 networkcard 04 storage Ignoring interface #3 which is handled by the qmi_wwan driver. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit a85d0d7 upstream. When call_crda() is called we kick off a witch hunt search for the same regulatory domain on our internal regulatory database and that work gets kicked off on a workqueue, this is done while the cfg80211_mutex is held. If that workqueue kicks off it will first lock reg_regdb_search_mutex and later cfg80211_mutex but to ensure two CPUs will not contend against cfg80211_mutex the right thing to do is to have the reg_regdb_search() wait until the cfg80211_mutex is let go. The lockdep report is pasted below. cfg80211: Calling CRDA to update world regulatory domain ====================================================== [ INFO: possible circular locking dependency detected ] 3.3.8 #3 Tainted: G O ------------------------------------------------------- kworker/0:1/235 is trying to acquire lock: (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] but task is already holding lock: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (reg_regdb_search_mutex){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211] -> #1 (reg_mutex#2){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211] -> #0 (cfg80211_mutex){+.+...}: [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(reg_regdb_search_mutex); lock(reg_mutex#2); lock(reg_regdb_search_mutex); lock(cfg80211_mutex); *** DEADLOCK *** 3 locks held by kworker/0:1/235: #0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460 #1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460 #2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] stack backtrace: Call Trace: [<80290fd4>] dump_stack+0x8/0x34 [<80291bc4>] print_circular_bug+0x2ac/0x2d8 [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] Reported-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 7d9b110 upstream. Do not kfree() the mtd_info; it is handled in the mtd subsystem and already freed by nand_release(). Instead kfree() the struct omap_nand_info allocated in omap_nand_probe which was not freed before. This patch fixes following error when unloading the omap2 module: ---8<--- ~ $ rmmod omap2 ------------[ cut here ]------------ kernel BUG at mm/slab.c:3126! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: omap2(-) CPU: 0 Not tainted (3.6.0-rc3-00230-g155e36d-dirty #3) PC is at cache_free_debugcheck+0x2d4/0x36c LR is at kfree+0xc8/0x2ac pc : [<c01125a0>] lr : [<c0112efc>] psr: 200d0193 sp : c521fe08 ip : c0e8ef90 fp : c521fe5c r10: bf0001fc r9 : c521e000 r8 : c0d99c8c r7 : c661ebc0 r6 : c065d5a4 r5 : c65c4060 r4 : c78005c0 r3 : 00000000 r2 : 00001000 r1 : c65c4000 r0 : 00000001 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 86694019 DAC: 00000015 Process rmmod (pid: 549, stack limit = 0xc521e2f0) Stack: (0xc521fe08 to 0xc5220000) fe00: c008a874 c00bf44c c515c6d0 200d0193 c65c4860 c515c240 fe20: c521fe3c c521fe30 c008a9c0 c008a854 c521fe5c c65c4860 c78005c0 bf0001fc fe40: c780ff40 a00d0113 c521e000 00000000 c521fe84 c521fe60 c0112efc c01122d8 fe60: c65c4860 c0673778 c06737ac 00000000 00070013 00000000 c521fe9c c521fe88 fe80: bf0001fc c0112e40 c0673778 bf001ca8 c521feac c521fea0 c02ca11c bf0001ac fea0: c521fec4 c521feb0 c02c82c4 c02ca100 c0673778 bf001ca8 c521fee4 c521fec8 fec0: c02c8dd8 c02c8250 00000000 bf001ca8 bf001ca8 c0804ee0 c521ff04 c521fee8 fee0: c02c804c c02c8d20 bf001924 00000000 bf001ca8 c521e000 c521ff1c c521ff08 ff00: c02c950c c02c7fbc bf001d48 00000000 c521ff2c c521ff20 c02ca3a4 c02c94b8 ff20: c521ff3c c521ff30 bf001938 c02ca394 c521ffa4 c521ff40 c009beb4 bf001930 ff40: c521ff6c 70616d6f b6fe0032 c0014f84 70616d6f b6fe0032 00000081 60070010 ff60: c521ff84 c521ff70 c008e1f4 c00bf328 0001a004 70616d6f c521ff94 0021ff88 ff80: c008e368 0001a004 70616d6f b6fe0032 00000081 c0015028 00000000 c521ffa8 ffa0: c0014dc0 c009bcd0 0001a004 70616d6f bec2ab38 00000880 bec2ab38 00000880 ffc0: 0001a004 70616d6f b6fe0032 00000081 00000319 00000000 b6fe1000 00000000 ffe0: bec2ab30 bec2ab20 00019f00 b6f539c0 60070010 bec2ab38 aaaaaaaa aaaaaaaa Backtrace: [<c01122cc>] (cache_free_debugcheck+0x0/0x36c) from [<c0112efc>] (kfree+0xc8/0x2ac) [<c0112e34>] (kfree+0x0/0x2ac) from [<bf0001fc>] (omap_nand_remove+0x5c/0x64 [omap2]) [<bf0001a0>] (omap_nand_remove+0x0/0x64 [omap2]) from [<c02ca11c>] (platform_drv_remove+0x28/0x2c) r5:bf001ca8 r4:c0673778 [<c02ca0f4>] (platform_drv_remove+0x0/0x2c) from [<c02c82c4>] (__device_release_driver+0x80/0xdc) [<c02c8244>] (__device_release_driver+0x0/0xdc) from [<c02c8dd8>] (driver_detach+0xc4/0xc8) r5:bf001ca8 r4:c0673778 [<c02c8d14>] (driver_detach+0x0/0xc8) from [<c02c804c>] (bus_remove_driver+0x9c/0x104) r6:c0804ee0 r5:bf001ca8 r4:bf001ca8 r3:00000000 [<c02c7fb0>] (bus_remove_driver+0x0/0x104) from [<c02c950c>] (driver_unregister+0x60/0x80) r6:c521e000 r5:bf001ca8 r4:00000000 r3:bf001924 [<c02c94ac>] (driver_unregister+0x0/0x80) from [<c02ca3a4>] (platform_driver_unregister+0x1c/0x20) r5:00000000 r4:bf001d48 [<c02ca388>] (platform_driver_unregister+0x0/0x20) from [<bf001938>] (omap_nand_driver_exit+0x14/0x1c [omap2]) [<bf001924>] (omap_nand_driver_exit+0x0/0x1c [omap2]) from [<c009beb4>] (sys_delete_module+0x1f0/0x2ec) [<c009bcc4>] (sys_delete_module+0x0/0x2ec) from [<c0014dc0>] (ret_fast_syscall+0x0/0x48) r8:c0015028 r7:00000081 r6:b6fe0032 r5:70616d6f r4:0001a004 Code: e1a00005 eb0d9172 e7f001f2 e7f001f2 (e7f001f2) ---[ end trace 6a30b24d8c0cc2ee ]--- Segmentation fault --->8--- This error was introduced in 67ce04b which was the first commit of this driver. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit abce9ac upstream. tpm_write calls tpm_transmit without checking the return value and assigns the return value unconditionally to chip->pending_data, even if it's an error value. This causes three bugs. So if we write to /dev/tpm0 with a tpm_param_size bigger than TPM_BUFSIZE=0x1000 (e.g. 0x100a) and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a) tpm_transmit returns -E2BIG which is assigned to chip->pending_data as -7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully been written to the TPM, altough this is not true (bug #1). As we did write more than than TPM_BUFSIZE bytes but tpm_write reports that only TPM_BUFSIZE bytes have been written the vfs tries to write the remaining bytes (in this case 10 bytes) to the tpm device driver via tpm_write which then blocks at /* cannot perform a write until the read has cleared either via tpm_read or a user_read_timer timeout */ while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); for 60 seconds, since data_pending is -7 and nobody is able to read it (since tpm_read luckily checks if data_pending is greater than 0) (#bug 2). After that the remaining bytes are written to the TPM which are interpreted by the tpm as a normal command. (bug #3) So if the last bytes of the command stream happen to be a e.g. tpm_force_clear this gets accidentally sent to the TPM. This patch fixes all three bugs, by propagating the error code of tpm_write and returning -E2BIG if the input buffer is too big, since the response from the tpm for a truncated value is bogus anyway. Moreover it returns -EBUSY to userspace if there is a response ready to be read. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Mike Galbraith <mgalbraith@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org

…gs() Problem: 1) Huge page mapping of anonymous memory is initially invalid. Will be faulted in by copy-on-write mechanism. 2) Userspace attempts store at the end of the huge mapping. 3) TLB Refill exception handler fill TLB with a normal (4K sized) invalid page at the end of the huge mapping virtual address range. 4) Userspace restarted, and re-attempts the store at the end of the huge mapping. 5) Page from #3 is invalid, we get a fault and go to the hugepage fault handler. This tries to map a huge page and calls huge_ptep_set_access_flags() to install the mapping. 6) We just call the generic ptep_set_access_flags() to set up the page tables, but the flush there assumes a normal (4K sized) page and only tries to flush the first part of the huge page virtual address out of the TLB, since the existing entry from step #3 doesn't conflict, nothing is flushed. 7) We attempt to load the mapping into the TLB, but because it conflicts with the entry from step #3, we get a Machine Check exception. The fix: Flush the entire rage covered by the huge page in huge_ptep_set_access_flags(), and remove the optimization in local_flush_tlb_range() so that the flush actually does the correct thing. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Hillf Danton <dhillf@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/4661/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> (cherry picked from commit dd617f2)

…estroy() Because ->pre_destroy() could fail and can't be called under cgroup_mutex, cgroup destruction did something very ugly. 1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise. 2. Release cgroup_mutex and call ->pre_destroy(). 3. Re-grab cgroup_mutex and verify it can still be destroyed; fail otherwise. 4. Continue destroying. In addition to being ugly, it has been always broken in various ways. For example, memcg ->pre_destroy() expects the cgroup to be inactive after it's done but tasks can be attached and detached between #2 and #3 and the conditions that memcg verified in ->pre_destroy() might no longer hold by the time control reaches #3. Now that ->pre_destroy() is no longer allowed to fail. We can switch to the following. 1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise. 2. Deactivate CSS's and mark the cgroup removed thus preventing any further operations which can invalidate the verification from #1. 3. Release cgroup_mutex and call ->pre_destroy(). 4. Re-grab cgroup_mutex and continue destroying. After this change, controllers can safely assume that ->pre_destroy() will only be called only once for a given cgroup and, once ->pre_destroy() is called, the cgroup will stay dormant till it's destroyed. This removes the only reason ->pre_destroy() can fail - new task being attached or child cgroup being created inbetween. Error out path is removed and ->pre_destroy() invocation is open coded in cgroup_rmdir(). v2: cgroup_call_pre_destroy() removal moved to this patch per Michal. Commit message updated per Glauber. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Glauber Costa <glommer@parallels.com>

Errata Titles: i103: Delay needed to read some GP timer, WD timer and sync timer registers after wakeup (OMAP3/4) i767: Delay needed to read some GP timer registers after wakeup (OMAP5) Description (i103/i767): If a General Purpose Timer (GPTimer) is in posted mode (TSICR [2].POSTED=1), due to internal resynchronizations, values read in TCRR, TCAR1 and TCAR2 registers right after the timer interface clock (L4) goes from stopped to active may not return the expected values. The most common event leading to this situation occurs upon wake up from idle. GPTimer non-posted synchronization mode is not impacted by this limitation. Workarounds: 1). Disable posted mode 2). Use static dependency between timer clock domain and MPUSS clock domain 3). Use no-idle mode when the timer is active Workarounds #2 and #3 are not pratical from a power standpoint and so workaround #1 has been implemented. Disabling posted mode adds some CPU overhead for configuring and reading the timers as the CPU has to wait for accesses to be re-synchronised within the timer. However, disabling posted mode guarantees correct operation. Please note that it is safe to use posted mode for timers if the counter (TCRR) and capture (TCARx) registers will never be read. An example of this is the clock-event system timer. This is used by the kernel to schedule events however, the timers counter is never read and capture registers are not used. Given that the kernel configures this timer often yet never reads the counter register it is safe to enable posted mode in this case. Hence, for the timer used for kernel clock-events, posted mode is enabled by overriding the errata for devices that are impacted by this defect. For drivers using the timers that do not read the counter or capture registers and wish to use posted mode, can override the errata and enable posted mode by making the following function calls. __omap_dm_timer_override_errata(timer, OMAP_TIMER_ERRATA_I103_I767); __omap_dm_timer_enable_posted(timer); Both dmtimers and watchdogs are impacted by this defect this patch only implements the workaround for the dmtimer. Currently the watchdog driver does not read the counter register and so no workaround is necessary. Posted mode will be disabled for all OMAP2+ devices (including AM33xx) using a GP timer as a clock-source timer to guarantee correct operation. This is not necessary for OMAP24xx devices but the default clock-source timer for OMAP24xx devices is the 32k-sync timer and not the GP timer and so should not have any impact. This should be re-visited for future devices if this errata is fixed. Confirmed with Vaibhav Hiremath that this bug also impacts AM33xx devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

When sched_show_task() is invoked from try_to_freeze_tasks(), there is no RCU read-side critical section, resulting in the following splat: [ 125.780730] =============================== [ 125.780766] [ INFO: suspicious RCU usage. ] [ 125.780804] 3.7.0-rc3+ #988 Not tainted [ 125.780838] ------------------------------- [ 125.780875] /home/rafael/src/linux/kernel/sched/core.c:4497 suspicious rcu_dereference_check() usage! [ 125.780946] [ 125.780946] other info that might help us debug this: [ 125.780946] [ 125.781031] [ 125.781031] rcu_scheduler_active = 1, debug_locks = 0 [ 125.781087] 4 locks held by s2ram/4211: [ 125.781120] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff811e2acf>] sysfs_write_file+0x3f/0x160 [ 125.781233] #1: (s_active#94){.+.+.+}, at: [<ffffffff811e2b58>] sysfs_write_file+0xc8/0x160 [ 125.781339] #2: (pm_mutex){+.+.+.}, at: [<ffffffff81090a81>] pm_suspend+0x81/0x230 [ 125.781439] #3: (tasklist_lock){.?.?..}, at: [<ffffffff8108feed>] try_to_freeze_tasks+0x2cd/0x3f0 [ 125.781543] [ 125.781543] stack backtrace: [ 125.781584] Pid: 4211, comm: s2ram Not tainted 3.7.0-rc3+ #988 [ 125.781632] Call Trace: [ 125.781662] [<ffffffff810a3c73>] lockdep_rcu_suspicious+0x103/0x140 [ 125.781719] [<ffffffff8107cf21>] sched_show_task+0x121/0x180 [ 125.781770] [<ffffffff8108ffb4>] try_to_freeze_tasks+0x394/0x3f0 [ 125.781823] [<ffffffff810903b5>] freeze_kernel_threads+0x25/0x80 [ 125.781876] [<ffffffff81090b65>] pm_suspend+0x165/0x230 [ 125.781924] [<ffffffff8108fa29>] state_store+0x99/0x100 [ 125.781975] [<ffffffff812f5867>] kobj_attr_store+0x17/0x20 [ 125.782038] [<ffffffff811e2b71>] sysfs_write_file+0xe1/0x160 [ 125.782091] [<ffffffff811667a6>] vfs_write+0xc6/0x180 [ 125.782138] [<ffffffff81166ada>] sys_write+0x5a/0xa0 [ 125.782185] [<ffffffff812ff6ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 125.782242] [<ffffffff81669dd2>] system_call_fastpath+0x16/0x1b This commit therefore adds the needed RCU read-side critical section. Reported-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

cgroup_create_dir() does weird dancing with dentry refcnt. On success, it gets and then puts it achieving nothing. On failure, it puts but there isn't no matching get anywhere leading to the following oops if cgroup_create_file() fails for whatever reason. ------------[ cut here ]------------ kernel BUG at /work/os/work/fs/dcache.c:552! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU 2 Pid: 697, comm: mkdir Not tainted 3.7.0-rc4-work+ #3 Bochs Bochs RIP: 0010:[<ffffffff811d9c0c>] [<ffffffff811d9c0c>] dput+0x1dc/0x1e0 RSP: 0018:ffff88001a3ebef8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88000e5b1ef8 RCX: 0000000000000403 RDX: 0000000000000303 RSI: 2000000000000000 RDI: ffff88000e5b1f58 RBP: ffff88001a3ebf18 R08: ffffffff82c76960 R09: 0000000000000001 R10: ffff880015022080 R11: ffd9bed70f48a041 R12: 00000000ffffffea R13: 0000000000000001 R14: ffff88000e5b1f58 R15: 00007fff57656d60 FS: 00007ff05fcb3800(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004046f0 CR3: 000000001315f000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mkdir (pid: 697, threadinfo ffff88001a3ea000, task ffff880015022080) Stack: ffff88001a3ebf48 00000000ffffffea 0000000000000001 0000000000000000 ffff88001a3ebf38 ffffffff811cc889 0000000000000001 ffff88000e5b1ef8 ffff88001a3ebf68 ffffffff811d1fc9 ffff8800198d7f18 ffff880019106ef8 Call Trace: [<ffffffff811cc889>] done_path_create+0x19/0x50 [<ffffffff811d1fc9>] sys_mkdirat+0x59/0x80 [<ffffffff811d2009>] sys_mkdir+0x19/0x20 [<ffffffff81be1e02>] system_call_fastpath+0x16/0x1b Code: 00 48 8d 90 18 01 00 00 48 89 93 c0 00 00 00 4c 89 a0 18 01 00 00 48 8b 83 a0 00 00 00 83 80 28 01 00 00 01 e8 e6 6f a0 00 eb 92 <0f> 0b 66 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 fe 41 RIP [<ffffffff811d9c0c>] dput+0x1dc/0x1e0 RSP <ffff88001a3ebef8> ---[ end trace 1277bcfd9561ddb0 ]--- Fix it by dropping the unnecessary dget/dput() pair. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org

…/kernel/git/paulg/linux Paul Gortmaker says: ==================== Changes since v1: -get rid of essentially unused variable spotted by Neil Horman (patch #2) -drop patch #3; defer it for 3.9 content, so Neil, Jon and Ying can discuss its specifics at their leisure while net-next is closed. (It had no direct dependencies to the rest of the series, and was just an optimization) -fix indentation of accept() code directly in place vs. forking it out to a separate function (was patch torvalds#10, now patch #9). Rebuilt and re-ran tests just to ensure nothing odd happened. Original v1 text follows, updated pull information follows that. --------- Here is another batch of TIPC changes. The most interesting thing is probably the non-blocking socket connect - I'm told there were several users looking forward to seeing this. Also there were some resource limitation changes that had the right intent back in 2005, but were now apparently causing needless limitations to people's real use cases; those have been relaxed/removed. There is a lockdep splat fix, but no need for a stable backport, since it is virtually impossible to trigger in mainline; you have to essentially modify code to force the probabilities in your favour to see it. The rest can largely be categorized as general cleanup of things seen in the process of getting the above changes done. Tested between 64 and 32 bit nodes with the test suite. I've also compile tested all the individual commits on the chain. I'd originally figured on this queue not being ready for 3.8, but the extended stabilization window of 3.7 has changed that. On the other hand, this can still be 3.9 material, if that simply works better for folks - no problem for me to defer it to 2013. If anyone spots any problems then I'll definitely defer it, rather than rush a last minute respin. =================== Signed-off-by: David S. Miller <davem@davemloft.net>

store_host_reset() has tried to re-invent the wheel to compare sysfs strings. Unfortunately it did so poorly and never bothered to check the input from userspace before overwriting stack with it, so something simple as: echo "WoopsieWoopsie" > /sys/devices/pseudo_0/adapter0/host0/scsi_host/host0/host_reset would result in: [ 316.310101] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81f5bac7 [ 316.310101] [ 316.320051] Pid: 6655, comm: sh Tainted: G W 3.7.0-rc5-next-20121114-sasha-00016-g5c9d68d-dirty torvalds#129 [ 316.320051] Call Trace: [ 316.340058] pps pps0: PPS event at 1352918752.620355751 [ 316.340062] pps pps0: capture assert seq torvalds#303 [ 316.320051] [<ffffffff83b3856b>] panic+0xcd/0x1f4 [ 316.320051] [<ffffffff81f5bac7>] ? store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff8110b996>] __stack_chk_fail+0x16/0x20 [ 316.320051] [<ffffffff81f5bac7>] store_host_reset+0xd7/0x100 [ 316.320051] [<ffffffff81e55bb3>] dev_attr_store+0x13/0x30 [ 316.320051] [<ffffffff812f7db1>] sysfs_write_file+0x101/0x170 [ 316.320051] [<ffffffff8127acc8>] vfs_write+0xb8/0x180 [ 316.320051] [<ffffffff8127ae80>] sys_write+0x50/0xa0 [ 316.320051] [<ffffffff83c03418>] tracesys+0xe1/0xe6 Fix this by uninventing whatever was going on there and just use sysfs_streq. Bug introduced by 2944369 ("[SCSI] scsi: Added support for adapter and firmware reset"). [jejb: added necessary const to prevent compile warnings] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: James Bottomley <JBottomley@Parallels.com>

…for success and failure. FC transport on receiving bsg_job submission failure, calls bsg_job->job_done() and sets the bsg_job->reply->result the returned value. In contrast, when the success code (0) is returned fc transport doesn't call bsg_job->job_done() and doesn't populate bsg_job->reply->result. Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: <stable@vger.kernel.org> #3.7 Signed-off-by: James Bottomley <JBottomley@Parallels.com>

… sequence while unloading qla2xxx driver. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: <stable@vger.kernel.org> #3.7 Signed-off-by: James Bottomley <JBottomley@Parallels.com>

…ck() Signed-off-by: Steve Hodgson <steve@purestorage.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: <stable@vger.kernel.org> #3.7 Signed-off-by: James Bottomley <JBottomley@Parallels.com>

Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

Commit 648bb56 ("cgroup: lock cgroup_mutex in cgroup_init_subsys()") made cgroup_init_subsys() grab cgroup_mutex before invoking ->css_alloc() for the root css. Because memcg registers hotcpu notifier from ->css_alloc() for the root css, this introduced circular locking dependency between cgroup_mutex and cpu hotplug. Fix it by moving hotcpu notifier registration to a subsys initcall. ====================================================== [ INFO: possible circular locking dependency detected ] 3.7.0-rc4-work+ torvalds#42 Not tainted ------------------------------------------------------- bash/645 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [<ffffffff8110c5b7>] cgroup_lock+0x17/0x20 but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109300f>] cpu_hotplug_begin+0x2f/0x60 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x97/0x1e0 mutex_lock_nested+0x61/0x3b0 get_online_cpus+0x3c/0x60 rebuild_sched_domains_locked+0x1b/0x70 cpuset_write_resmask+0x298/0x2c0 cgroup_file_write+0x1ef/0x300 vfs_write+0xa8/0x160 sys_write+0x52/0xa0 system_call_fastpath+0x16/0x1b -> #0 (cgroup_mutex){+.+.+.}: __lock_acquire+0x14ce/0x1d20 lock_acquire+0x97/0x1e0 mutex_lock_nested+0x61/0x3b0 cgroup_lock+0x17/0x20 cpuset_handle_hotplug+0x1b/0x560 cpuset_update_active_cpus+0xe/0x10 cpuset_cpu_inactive+0x47/0x50 notifier_call_chain+0x66/0x150 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x20/0x40 _cpu_down+0x7e/0x2f0 cpu_down+0x36/0x50 store_online+0x5d/0xe0 dev_attr_store+0x18/0x30 sysfs_write_file+0xe0/0x150 vfs_write+0xa8/0x160 sys_write+0x52/0xa0 system_call_fastpath+0x16/0x1b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(cgroup_mutex); lock(cpu_hotplug.lock); lock(cgroup_mutex); *** DEADLOCK *** 5 locks held by bash/645: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8123bab8>] sysfs_write_file+0x48/0x150 #1: (s_active#42){.+.+.+}, at: [<ffffffff8123bb38>] sysfs_write_file+0xc8/0x150 #2: (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81079277>] cpu_hotplug_driver_lock+0x1 +7/0x20 #3: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81093157>] cpu_maps_update_begin+0x17/0x20 #4: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109300f>] cpu_hotplug_begin+0x2f/0x60 stack backtrace: Pid: 645, comm: bash Not tainted 3.7.0-rc4-work+ torvalds#42 Call Trace: print_circular_bug+0x28e/0x29f __lock_acquire+0x14ce/0x1d20 lock_acquire+0x97/0x1e0 mutex_lock_nested+0x61/0x3b0 cgroup_lock+0x17/0x20 cpuset_handle_hotplug+0x1b/0x560 cpuset_update_active_cpus+0xe/0x10 cpuset_cpu_inactive+0x47/0x50 notifier_call_chain+0x66/0x150 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x20/0x40 _cpu_down+0x7e/0x2f0 cpu_down+0x36/0x50 store_online+0x5d/0xe0 dev_attr_store+0x18/0x30 sysfs_write_file+0xe0/0x150 vfs_write+0xa8/0x160 sys_write+0x52/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Yan Burman reported following lockdep warning : ============================================= [ INFO: possible recursive locking detected ] 3.7.0+ torvalds#24 Not tainted --------------------------------------------- swapper/1/0 is trying to acquire lock: (&n->lock){++--..}, at: [<ffffffff8139f56e>] __neigh_event_send +0x2e/0x2f0 but task is already holding lock: (&n->lock){++--..}, at: [<ffffffff813f63f4>] arp_solicit+0x1d4/0x280 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock); lock(&n->lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by swapper/1/0: #0: (((&n->timer))){+.-...}, at: [<ffffffff8104b350>] call_timer_fn+0x0/0x1c0 #1: (&n->lock){++--..}, at: [<ffffffff813f63f4>] arp_solicit +0x1d4/0x280 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff81395400>] dev_queue_xmit+0x0/0x5d0 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff813cb41e>] ip_finish_output+0x13e/0x640 stack backtrace: Pid: 0, comm: swapper/1 Not tainted 3.7.0+ torvalds#24 Call Trace: <IRQ> [<ffffffff8108c7ac>] validate_chain+0xdcc/0x11f0 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff81120565>] ? kmem_cache_free+0xe5/0x1c0 [<ffffffff8108d570>] __lock_acquire+0x440/0xc30 [<ffffffff813c3570>] ? inet_getpeer+0x40/0x600 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8108ddf5>] lock_acquire+0x95/0x140 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff81448d4b>] _raw_write_lock_bh+0x3b/0x50 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8139f56e>] __neigh_event_send+0x2e/0x2f0 [<ffffffff8139f99b>] neigh_resolve_output+0x16b/0x270 [<ffffffff813cb62d>] ip_finish_output+0x34d/0x640 [<ffffffff813cb41e>] ? ip_finish_output+0x13e/0x640 [<ffffffffa046f146>] ? vxlan_xmit+0x556/0xbec [vxlan] [<ffffffff813cb9a0>] ip_output+0x80/0xf0 [<ffffffff813ca368>] ip_local_out+0x28/0x80 [<ffffffffa046f25a>] vxlan_xmit+0x66a/0xbec [vxlan] [<ffffffffa046f146>] ? vxlan_xmit+0x556/0xbec [vxlan] [<ffffffff81394a50>] ? skb_gso_segment+0x2b0/0x2b0 [<ffffffff81449355>] ? _raw_spin_unlock_irqrestore+0x65/0x80 [<ffffffff81394c57>] ? dev_queue_xmit_nit+0x207/0x270 [<ffffffff813950c8>] dev_hard_start_xmit+0x298/0x5d0 [<ffffffff813956f3>] dev_queue_xmit+0x2f3/0x5d0 [<ffffffff81395400>] ? dev_hard_start_xmit+0x5d0/0x5d0 [<ffffffff813f5788>] arp_xmit+0x58/0x60 [<ffffffff813f59db>] arp_send+0x3b/0x40 [<ffffffff813f6424>] arp_solicit+0x204/0x280 [<ffffffff813a1a70>] ? neigh_add+0x310/0x310 [<ffffffff8139f515>] neigh_probe+0x45/0x70 [<ffffffff813a1c10>] neigh_timer_handler+0x1a0/0x2a0 [<ffffffff8104b3cf>] call_timer_fn+0x7f/0x1c0 [<ffffffff8104b350>] ? detach_if_pending+0x120/0x120 [<ffffffff8104b748>] run_timer_softirq+0x238/0x2b0 [<ffffffff813a1a70>] ? neigh_add+0x310/0x310 [<ffffffff81043e51>] __do_softirq+0x101/0x280 [<ffffffff814518cc>] call_softirq+0x1c/0x30 [<ffffffff81003b65>] do_softirq+0x85/0xc0 [<ffffffff81043a7e>] irq_exit+0x9e/0xc0 [<ffffffff810264f8>] smp_apic_timer_interrupt+0x68/0xa0 [<ffffffff8145122f>] apic_timer_interrupt+0x6f/0x80 <EOI> [<ffffffff8100a054>] ? mwait_idle+0xa4/0x1c0 [<ffffffff8100a04b>] ? mwait_idle+0x9b/0x1c0 [<ffffffff8100a6a9>] cpu_idle+0x89/0xe0 [<ffffffff81441127>] start_secondary+0x1b2/0x1b6 Bug is from arp_solicit(), releasing the neigh lock after arp_send() In case of vxlan, we eventually need to write lock a neigh lock later. Its a false positive, but we can get rid of it without lockdep annotations. We can instead use neigh_ha_snapshot() helper. Reported-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5a50508 ("mm/rmap: Convert the struct anon_vma::mutex to an rwsem") turned anon_vma mutex to rwsem. However, the properly annotated nested locking in mm_take_all_locks() has been converted from mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem); to down_write(&anon_vma->root->rwsem); which is incomplete, and causes the false positive report from lockdep below. Annotate the fact that mmap_sem is used as an outter lock to serialize taking of all the anon_vma rwsems at once no matter the order, using the down_write_nest_lock() primitive. This patch fixes this lockdep report: ============================================= [ INFO: possible recursive locking detected ] 3.8.0-rc2-00036-g5f73896 torvalds#171 Not tainted --------------------------------------------- qemu-kvm/2315 is trying to acquire lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 but task is already holding lock: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&anon_vma->rwsem); lock(&anon_vma->rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by qemu-kvm/2315: #0: (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170 #1: (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0 #2: (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0 #3: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0 stack backtrace: Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f73896 torvalds#171 Call Trace: print_deadlock_bug+0xf2/0x100 validate_chain+0x4f6/0x720 __lock_acquire+0x359/0x580 lock_acquire+0x121/0x190 down_write+0x3f/0x70 mm_take_all_locks+0x149/0x1b0 do_mmu_notifier_register+0x68/0x170 mmu_notifier_register+0xe/0x10 kvm_create_vm+0x22b/0x330 [kvm] kvm_dev_ioctl+0xf8/0x1a0 [kvm] do_vfs_ioctl+0x9d/0x350 sys_ioctl+0x91/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mel Gorman <mel@csn.ul.ie> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bjørn Mork says: ==================== The 2 first patches in this series are required to make the Sierra Wireless MC7710 card work in MBIM mode. They may also be required for other Qualcomm firmware based MBIM devices. Patch #1 was previously posted as a standalone patch. This version is a replacement, removing a theoretical NULL pointer exception. Patch #3 fixes a bug I introduced in v3.7 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

commit 1dd9bc0 upstream. fs_context::user_ns is used by fuse_parse_param(), even during remount, so it needs to be set to the existing value for reconfigure. Reproducer: #include <fcntl.h> #include <sys/mount.h> int main() { char opts[128]; int fd = open("/dev/fuse", O_RDWR); sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd); mkdir("mnt", 0777); mount("foo", "mnt", "fuse.foo", 0, opts); mount("foo", "mnt", "fuse.foo", MS_REMOUNT, opts); } Crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 129 Comm: syz_make_kuid Not tainted 5.3.0-rc5-next-20190821 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:map_id_range_down+0xb/0xc0 kernel/user_namespace.c:291 [...] Call Trace: map_id_down kernel/user_namespace.c:312 [inline] make_kuid+0xe/0x10 kernel/user_namespace.c:389 fuse_parse_param+0x116/0x210 fs/fuse/inode.c:523 vfs_parse_fs_param+0xdb/0x1b0 fs/fs_context.c:145 vfs_parse_fs_string+0x6a/0xa0 fs/fs_context.c:188 generic_parse_monolithic+0x85/0xc0 fs/fs_context.c:228 parse_monolithic_mount_data+0x1b/0x20 fs/fs_context.c:708 do_remount fs/namespace.c:2525 [inline] do_mount+0x39a/0xa60 fs/namespace.c:3107 ksys_mount+0x7d/0xd0 fs/namespace.c:3325 __do_sys_mount fs/namespace.c:3339 [inline] __se_sys_mount fs/namespace.c:3336 [inline] __x64_sys_mount+0x20/0x30 fs/namespace.c:3336 do_syscall_64+0x4a/0x1a0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+7d6a57304857423318a5@syzkaller.appspotmail.com Fixes: 408cbe6 ("vfs: Convert fuse to use the new mount API") Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0216234 upstream. We release wrong pointer on error path in cpu_cache_level__read function, leading to segfault: (gdb) r record ls Starting program: /root/perf/tools/perf/perf record ls ... [ perf record: Woken up 1 times to write data ] double free or corruption (out) Thread 1 "perf" received signal SIGABRT, Aborted. 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 (gdb) bt #0 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 #1 0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6 #2 0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6 #3 0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6 #4 0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6 #5 0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc.. #6 0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac.. #7 0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz.. ... Releasing the proper pointer. Fixes: 720e98b ("perf tools: Add perf data cache feature") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org: # v4.6+ Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 443f2d5 upstream. Observe a segmentation fault when 'perf stat' is asked to repeat forever with the interval option. Without fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.000211692 3,13,89,82,34,157 cycles 10.000380119 1,53,98,52,22,294 cycles 10.040467280 17,16,79,265 cycles Segmentation fault This problem was only observed when we use forever option aka -r 0 and works with limited repeats. Calling print_counter with ts being set to NULL, is not a correct option when interval is set. Hence avoid print_counter(NULL,..) if interval is set. With fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.019866622 3,15,14,43,08,697 cycles 10.039865756 3,15,16,31,95,261 cycles 10.059950628 1,26,05,47,158 cycles 5.009902655 3,14,52,62,33,932 cycles 10.019880228 3,14,52,22,89,154 cycles 10.030543876 66,90,18,333 cycles 5.009848281 3,14,51,98,25,437 cycles 10.029854402 3,15,14,93,04,918 cycles 5.009834177 3,14,51,95,92,316 cycles Committer notes: Did the 'git bisect' to find the cset introducing the problem to add the Fixes tag below, and at that time the problem reproduced as: (gdb) run stat -r0 -I500 sleep 1 <SNIP> Program received signal SIGSEGV, Segmentation fault. print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); (gdb) bt #0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 #1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938 #2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411 #3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370 #4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429 #5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473 #6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588 (gdb) Mostly the same as just before this patch: Program received signal SIGSEGV, Segmentation fault. 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep); (gdb) bt #0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 #1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670) at util/stat-display.c:1172 #2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656 #3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960 #4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310 #5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362 #6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406 #7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531 (gdb) Fixes: d4f63a4 ("perf stat: Introduce print_counters function") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.2+ Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4f2a572 upstream. Daniel Vetter uncovered a nasty cycle in using the mmu-notifiers to invalidate userptr objects which also happen to be pulled into GGTT mmaps. That is when we unbind the userptr object (on mmu invalidation), we revoke all CPU mmaps, which may then recurse into mmu invalidation. We looked for ways of breaking the cycle, but the revocation on invalidation is required and cannot be avoided. The only solution we could see was to not allow such GGTT bindings of userptr objects in the first place. In practice, no one really wants to use a GGTT mmapping of a CPU pointer... Just before Daniel's explosive lockdep patches land in v5.4-rc1, we got a genuine blip from CI: <4>[ 246.793958] ====================================================== <4>[ 246.793972] WARNING: possible circular locking dependency detected <4>[ 246.793989] 5.3.0-gbd6c56f50d15-drmtip_372+ #1 Tainted: G U <4>[ 246.794003] ------------------------------------------------------ <4>[ 246.794017] kswapd0/145 is trying to acquire lock: <4>[ 246.794030] 000000003f565be6 (&dev->struct_mutex/1){+.+.}, at: userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794250] but task is already holding lock: <4>[ 246.794263] 000000001799cef9 (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe6/0x2a0 <4>[ 246.794291] which lock already depends on the new lock. <4>[ 246.794307] the existing dependency chain (in reverse order) is: <4>[ 246.794322] -> #3 (&anon_vma->rwsem){++++}: <4>[ 246.794344] down_write+0x33/0x70 <4>[ 246.794357] __vma_adjust+0x3d9/0x7b0 <4>[ 246.794370] __split_vma+0x16a/0x180 <4>[ 246.794385] mprotect_fixup+0x2a5/0x320 <4>[ 246.794399] do_mprotect_pkey+0x208/0x2e0 <4>[ 246.794413] __x64_sys_mprotect+0x16/0x20 <4>[ 246.794429] do_syscall_64+0x55/0x1c0 <4>[ 246.794443] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794456] -> #2 (&mapping->i_mmap_rwsem){++++}: <4>[ 246.794478] down_write+0x33/0x70 <4>[ 246.794493] unmap_mapping_pages+0x48/0x130 <4>[ 246.794519] i915_vma_revoke_mmap+0x81/0x1b0 [i915] <4>[ 246.794519] i915_vma_unbind+0x11d/0x4a0 [i915] <4>[ 246.794519] i915_vma_destroy+0x31/0x300 [i915] <4>[ 246.794519] __i915_gem_free_objects+0xb8/0x4b0 [i915] <4>[ 246.794519] drm_file_free.part.0+0x1e6/0x290 <4>[ 246.794519] drm_release+0xa6/0xe0 <4>[ 246.794519] __fput+0xc2/0x250 <4>[ 246.794519] task_work_run+0x82/0xb0 <4>[ 246.794519] do_exit+0x35b/0xdb0 <4>[ 246.794519] do_group_exit+0x34/0xb0 <4>[ 246.794519] __x64_sys_exit_group+0xf/0x10 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #1 (&vm->mutex){+.+.}: <4>[ 246.794519] i915_gem_shrinker_taints_mutex+0x6d/0xe0 [i915] <4>[ 246.794519] i915_address_space_init+0x9f/0x160 [i915] <4>[ 246.794519] i915_ggtt_init_hw+0x55/0x170 [i915] <4>[ 246.794519] i915_driver_probe+0xc9f/0x1620 [i915] <4>[ 246.794519] i915_pci_probe+0x43/0x1b0 [i915] <4>[ 246.794519] pci_device_probe+0x9e/0x120 <4>[ 246.794519] really_probe+0xea/0x3d0 <4>[ 246.794519] driver_probe_device+0x10b/0x120 <4>[ 246.794519] device_driver_attach+0x4a/0x50 <4>[ 246.794519] __driver_attach+0x97/0x130 <4>[ 246.794519] bus_for_each_dev+0x74/0xc0 <4>[ 246.794519] bus_add_driver+0x13f/0x210 <4>[ 246.794519] driver_register+0x56/0xe0 <4>[ 246.794519] do_one_initcall+0x58/0x300 <4>[ 246.794519] do_init_module+0x56/0x1f6 <4>[ 246.794519] load_module+0x25bd/0x2a40 <4>[ 246.794519] __se_sys_finit_module+0xd3/0xf0 <4>[ 246.794519] do_syscall_64+0x55/0x1c0 <4>[ 246.794519] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 246.794519] -> #0 (&dev->struct_mutex/1){+.+.}: <4>[ 246.794519] __lock_acquire+0x15d8/0x1e90 <4>[ 246.794519] lock_acquire+0xa6/0x1c0 <4>[ 246.794519] __mutex_lock+0x9d/0x9b0 <4>[ 246.794519] userptr_mn_invalidate_range_start+0x18f/0x220 [i915] <4>[ 246.794519] __mmu_notifier_invalidate_range_start+0x85/0x110 <4>[ 246.794519] try_to_unmap_one+0x76b/0x860 <4>[ 246.794519] rmap_walk_anon+0x104/0x280 <4>[ 246.794519] try_to_unmap+0xc0/0xf0 <4>[ 246.794519] shrink_page_list+0x561/0xc10 <4>[ 246.794519] shrink_inactive_list+0x220/0x440 <4>[ 246.794519] shrink_node_memcg+0x36e/0x740 <4>[ 246.794519] shrink_node+0xcb/0x490 <4>[ 246.794519] balance_pgdat+0x241/0x580 <4>[ 246.794519] kswapd+0x16c/0x530 <4>[ 246.794519] kthread+0x119/0x130 <4>[ 246.794519] ret_from_fork+0x24/0x50 <4>[ 246.794519] other info that might help us debug this: <4>[ 246.794519] Chain exists of: &dev->struct_mutex/1 --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem <4>[ 246.794519] Possible unsafe locking scenario: <4>[ 246.794519] CPU0 CPU1 <4>[ 246.794519] ---- ---- <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&mapping->i_mmap_rwsem); <4>[ 246.794519] lock(&anon_vma->rwsem); <4>[ 246.794519] lock(&dev->struct_mutex/1); <4>[ 246.794519] *** DEADLOCK *** v2: Say no to mmap_ioctl Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111744 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111870 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190928082546.3473-1-chris@chris-wilson.co.uk (cherry picked from commit a431174) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b66f31e ] This patch fixes the lock inversion complaint: ============================================ WARNING: possible recursive locking detected 5.3.0-rc7-dbg+ #1 Not tainted -------------------------------------------- kworker/u16:6/171 is trying to acquire lock: 00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm] but task is already holding lock: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&id_priv->handler_mutex); lock(&id_priv->handler_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u16:6/171: #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] stack backtrace: CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x8a/0xd6 __lock_acquire.cold+0xe1/0x24d lock_acquire+0x106/0x240 __mutex_lock+0x12e/0xcb0 mutex_lock_nested+0x1f/0x30 rdma_destroy_id+0x78/0x4a0 [rdma_cm] iw_conn_req_handler+0x5c9/0x680 [rdma_cm] cm_work_handler+0xe62/0x1100 [iw_cm] process_one_work+0x56d/0xac0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 This is not a bug as there are actually two lock classes here. Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org Fixes: de910bd ("RDMA/cma: Simplify locking needed for serialization of callbacks") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 5effc09 upstream. 8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ab0db04 ] When running with -o enospc_debug you can get the following splat if one of the dump_space_info's trip ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc5+ torvalds#20 Tainted: G OE ------------------------------------------------------ dd/563090 is trying to acquire lock: ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs] but task is already holding lock: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&cache->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs] find_free_extent+0x7ef/0x13b0 [btrfs] btrfs_reserve_extent+0x9b/0x180 [btrfs] btrfs_alloc_tree_block+0xc1/0x340 [btrfs] alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs] __btrfs_cow_block+0x122/0x530 [btrfs] btrfs_cow_block+0x106/0x210 [btrfs] commit_cowonly_roots+0x55/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&space_info->lock){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs] btrfs_inode_rsv_release+0x4f/0x170 [btrfs] btrfs_clear_delalloc_extent+0x155/0x480 [btrfs] clear_state_bit+0x81/0x1a0 [btrfs] __clear_extent_bit+0x25c/0x5d0 [btrfs] clear_extent_bit+0x15/0x20 [btrfs] btrfs_invalidatepage+0x2b7/0x3c0 [btrfs] truncate_cleanup_page+0x47/0xe0 truncate_inode_pages_range+0x238/0x840 truncate_pagecache+0x44/0x60 btrfs_setattr+0x202/0x5e0 [btrfs] notify_change+0x33b/0x490 do_truncate+0x76/0xd0 path_openat+0x687/0xa10 do_filp_open+0x91/0x100 do_sys_openat2+0x215/0x2d0 do_sys_open+0x44/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&tree->lock#2){+.+.}-{2:2}: _raw_spin_lock+0x25/0x30 find_first_extent_bit+0x32/0x150 [btrfs] write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs] __btrfs_write_out_cache+0x172/0x480 [btrfs] btrfs_write_out_cache+0x7a/0xf0 [btrfs] btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs] commit_cowonly_roots+0x245/0x300 [btrfs] btrfs_commit_transaction+0x4ed/0xac0 [btrfs] close_ctree+0xf9/0x2f5 [btrfs] generic_shutdown_super+0x6c/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x36/0x70 cleanup_mnt+0x104/0x160 task_work_run+0x5f/0x90 __prepare_exit_to_usermode+0x1bd/0x1c0 do_syscall_64+0x5e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&ctl->tree_lock){+.+.}-{2:2}: __lock_acquire+0x1240/0x2460 lock_acquire+0xab/0x360 _raw_spin_lock+0x25/0x30 btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &ctl->tree_lock --> &space_info->lock --> &cache->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cache->lock); lock(&space_info->lock); lock(&cache->lock); lock(&ctl->tree_lock); *** DEADLOCK *** 6 locks held by dd/563090: #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200 #1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs] #2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs] #3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs] #4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs] #5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs] stack backtrace: CPU: 3 PID: 563090 Comm: dd Tainted: G OE 5.8.0-rc5+ torvalds#20 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011 Call Trace: dump_stack+0x96/0xd0 check_noncircular+0x162/0x180 __lock_acquire+0x1240/0x2460 ? wake_up_klogd.part.0+0x30/0x40 lock_acquire+0xab/0x360 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] _raw_spin_lock+0x25/0x30 ? btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_free_space+0x2b/0xa0 [btrfs] btrfs_dump_space_info+0xf4/0x120 [btrfs] btrfs_reserve_extent+0x176/0x180 [btrfs] __btrfs_prealloc_file_range+0x145/0x550 [btrfs] ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs] cache_save_setup+0x28d/0x3b0 [btrfs] btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs] btrfs_commit_transaction+0xcc/0xac0 [btrfs] ? start_transaction+0xe0/0x5b0 [btrfs] btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs] btrfs_check_data_free_space+0x4c/0xa0 [btrfs] btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs] ? ktime_get_coarse_real_ts64+0xa8/0xd0 ? trace_hardirqs_on+0x1c/0xe0 btrfs_file_write_iter+0x3cf/0x610 [btrfs] new_sync_write+0x11e/0x1b0 vfs_write+0x1c9/0x200 ksys_write+0x68/0xe0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is because we're holding the block_group->lock while trying to dump the free space cache. However we don't need this lock, we just need it to read the values for the printk, so move the free space cache dumping outside of the block group lock. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…onfig [ Upstream commit 8a473c3 ] When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by a quirk with a devm allocated structure and the probe is deferred, in the next probe we will see an use-after-free condition (verified with KASAN). This can be avoided by using statically allocated configurations - which simplifies the code quite a bit as well. KASAN issue fixed. [ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f [ 23.301875] ================================================================== [ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105 [ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3 [ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020 [ 23.302329] Workqueue: events deferred_probe_work_func [ 23.302331] Call Trace: [ 23.302339] dump_stack+0x76/0xa0 [ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e [ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0 [ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302365] __kasan_report.cold+0x37/0x86 [ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302375] kasan_report+0x38/0x50 [ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302389] platform_drv_probe+0x66/0xc0 Fixes: 629ba12 ("ASoC: Intel: boards: split woofer and tweeter support") Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 18c850f upstream. There's long existed a lockdep splat because we open our bdev's under the ->device_list_mutex at mount time, which acquires the bd_mutex. Usually this goes unnoticed, but if you do loopback devices at all suddenly the bd_mutex comes with a whole host of other dependencies, which results in the splat when you mount a btrfs file system. ====================================================== WARNING: possible circular locking dependency detected 5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted ------------------------------------------------------ systemd-journal/509 is trying to acquire lock: ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs] but task is already holding lock: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (sb_pagefaults){.+.+}-{0:0}: __sb_start_write+0x13e/0x220 btrfs_page_mkwrite+0x59/0x560 [btrfs] do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 asm_exc_page_fault+0x1e/0x30 -> #5 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x60/0x80 _copy_from_user+0x20/0xb0 get_sg_io_hdr+0x9a/0xb0 scsi_cmd_ioctl+0x1ea/0x2f0 cdrom_ioctl+0x3c/0x12b4 sr_block_ioctl+0xa4/0xd0 block_ioctl+0x3f/0x50 ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&cd->lock){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 sr_block_open+0xa2/0x180 __blkdev_get+0xdd/0x550 blkdev_get+0x38/0x150 do_dentry_open+0x16b/0x3e0 path_openat+0x3c9/0xa00 do_filp_open+0x75/0x100 do_sys_openat2+0x8a/0x140 __x64_sys_openat+0x46/0x70 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&bdev->bd_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 __blkdev_get+0x6a/0x550 blkdev_get+0x85/0x150 blkdev_get_by_path+0x2c/0x70 btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] open_fs_devices+0x88/0x240 [btrfs] btrfs_open_devices+0x92/0xa0 [btrfs] btrfs_mount_root+0x250/0x490 [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x119/0x380 [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 do_mount+0x8c6/0xca0 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 btrfs_run_dev_stats+0x36/0x420 [btrfs] commit_cowonly_roots+0x91/0x2d0 [btrfs] btrfs_commit_transaction+0x4e6/0x9f0 [btrfs] btrfs_sync_file+0x38a/0x480 [btrfs] __x64_sys_fdatasync+0x47/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 btrfs_commit_transaction+0x48e/0x9f0 [btrfs] btrfs_sync_file+0x38a/0x480 [btrfs] __x64_sys_fdatasync+0x47/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}: __lock_acquire+0x1241/0x20c0 lock_acquire+0xb0/0x400 __mutex_lock+0x7b/0x820 btrfs_record_root_in_trans+0x44/0x70 [btrfs] start_transaction+0xd2/0x500 [btrfs] btrfs_dirty_inode+0x44/0xd0 [btrfs] file_update_time+0xc6/0x120 btrfs_page_mkwrite+0xda/0x560 [btrfs] do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_pagefaults); lock(&mm->mmap_lock#2); lock(sb_pagefaults); lock(&fs_info->reloc_mutex); *** DEADLOCK *** 3 locks held by systemd-journal/509: #0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0 #1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs] #2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs] stack backtrace: CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x92/0xc8 check_noncircular+0x134/0x150 __lock_acquire+0x1241/0x20c0 lock_acquire+0xb0/0x400 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] ? lock_acquire+0xb0/0x400 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] __mutex_lock+0x7b/0x820 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] ? kvm_sched_clock_read+0x14/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0xc/0xb0 btrfs_record_root_in_trans+0x44/0x70 [btrfs] start_transaction+0xd2/0x500 [btrfs] btrfs_dirty_inode+0x44/0xd0 [btrfs] file_update_time+0xc6/0x120 btrfs_page_mkwrite+0xda/0x560 [btrfs] ? sched_clock+0x5/0x10 do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fa3972fdbfe Code: Bad RIP value. Fix this by not holding the ->device_list_mutex at this point. The device_list_mutex exists to protect us from modifying the device list while the file system is running. However it can also be modified by doing a scan on a device. But this action is specifically protected by the uuid_mutex, which we are holding here. We cannot race with opening at this point because we have the ->s_mount lock held during the mount. Not having the ->device_list_mutex here is perfectly safe as we're not going to change the devices at this point. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add some comments ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… set [ Upstream commit 1101c87 ] We received an error report that perf-record caused 'Segmentation fault' on a newly system (e.g. on the new installed ubuntu). (gdb) backtrace #0 __read_once_size (size=4, res=<synthetic pointer>, p=0x14) at /root/0-jinyao/acme/tools/include/linux/compiler.h:139 #1 atomic_read (v=0x14) at /root/0-jinyao/acme/tools/include/asm/../../arch/x86/include/asm/atomic.h:28 #2 refcount_read (r=0x14) at /root/0-jinyao/acme/tools/include/linux/refcount.h:65 #3 perf_mmap__read_init (map=map@entry=0x0) at mmap.c:177 #4 0x0000561ce5c0de39 in perf_evlist__poll_thread (arg=0x561ce68584d0) at util/sideband_evlist.c:62 #5 0x00007fad78491609 in start_thread (arg=<optimized out>) at pthread_create.c:477 #6 0x00007fad7823c103 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 The root cause is, evlist__add_bpf_sb_event() just returns 0 if HAVE_LIBBPF_SUPPORT is not defined (inline function path). So it will not create a valid evsel for side-band event. But perf-record still creates BPF side band thread to process the side-band event, then the error happpens. We can reproduce this issue by removing the libelf-dev. e.g. 1. apt-get remove libelf-dev 2. perf record -a -- sleep 1 root@test:~# ./perf record -a -- sleep 1 perf: Segmentation fault Obtained 6 stack frames. ./perf(+0x28eee8) [0x5562d6ef6ee8] /lib/x86_64-linux-gnu/libc.so.6(+0x46210) [0x7fbfdc65f210] ./perf(+0x342e74) [0x5562d6faae74] ./perf(+0x257e39) [0x5562d6ebfe39] /lib/x86_64-linux-gnu/libpthread.so.0(+0x9609) [0x7fbfdc990609] /lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x7fbfdc73b103] Segmentation fault (core dumped) To fix this issue, 1. We either install the missing libraries to let HAVE_LIBBPF_SUPPORT be defined. e.g. apt-get install libelf-dev and install other related libraries. 2. Use this patch to skip the side-band event setup if HAVE_LIBBPF_SUPPORT is not set. Committer notes: The side band thread is not used just with BPF, it is also used with --switch-output-event, so narrow the ifdef to the BPF specific part. Fixes: 23cbb41 ("perf record: Move side band evlist setup to separate routine") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200805022937.29184-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b0f3b87 ] https://bugzilla.kernel.org/show_bug.cgi?id=208565 PID: 257 TASK: ecdd0000 CPU: 0 COMMAND: "init" #0 [<c0b420ec>] (__schedule) from [<c0b423c8>] #1 [<c0b423c8>] (schedule) from [<c0b459d4>] #2 [<c0b459d4>] (rwsem_down_read_failed) from [<c0b44fa0>] #3 [<c0b44fa0>] (down_read) from [<c044233c>] #4 [<c044233c>] (f2fs_truncate_blocks) from [<c0442890>] #5 [<c0442890>] (f2fs_truncate) from [<c044d408>] #6 [<c044d408>] (f2fs_evict_inode) from [<c030be18>] #7 [<c030be18>] (evict) from [<c030a558>] #8 [<c030a558>] (iput) from [<c047c600>] #9 [<c047c600>] (f2fs_sync_node_pages) from [<c0465414>] torvalds#10 [<c0465414>] (f2fs_write_checkpoint) from [<c04575f4>] torvalds#11 [<c04575f4>] (f2fs_sync_fs) from [<c0441918>] torvalds#12 [<c0441918>] (f2fs_do_sync_file) from [<c0441098>] torvalds#13 [<c0441098>] (f2fs_sync_file) from [<c0323fa0>] torvalds#14 [<c0323fa0>] (vfs_fsync_range) from [<c0324294>] torvalds#15 [<c0324294>] (do_fsync) from [<c0324014>] torvalds#16 [<c0324014>] (sys_fsync) from [<c0108bc0>] This can be caused by flush_dirty_inode() in f2fs_sync_node_pages() where iput() requires f2fs_lock_op() again resulting in livelock. Reported-by: Zhiguo Niu <Zhiguo.Niu@unisoc.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e89c4a9 upstream. I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 torvalds#932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 torvalds#932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eed8f88 upstream. This reverts commit 61eee4a ("ALSA: hda: Add support for Loongson 7A1000 controller") to fix the following error on the Loongson LS7A platform: rcu: INFO: rcu_preempt self-detected stall on CPU <SNIP> NMI backtrace for cpu 0 CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3 Hardware name: , BIOS Workqueue: events azx_probe_work [snd_hda_intel] <SNIP> Call Trace: [<ffffffff80211a64>] show_stack+0x9c/0x130 [<ffffffff8065a740>] dump_stack+0xb0/0xf0 [<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140 [<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200 [<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190 [<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8 [<ffffffff802b91d4>] update_process_times+0x2c/0xb8 [<ffffffff802cad80>] tick_sched_timer+0x40/0xb8 [<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0 [<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8 [<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0 [<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198 [<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90 [<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8 [<ffffffff80296124>] generic_handle_irq+0x44/0x60 [<ffffffff80b3cfd0>] do_IRQ+0x18/0x28 [<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100 [<ffffffff80209a20>] handle_int+0x140/0x14c [<ffffffff802402e8>] irq_exit+0xf8/0x100 Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA controller, it needs some workarounds which are not merged into the upstream kernel at this time, so it should revert this patch now. Fixes: 61eee4a ("ALSA: hda: Add support for Loongson 7A1000 controller") Cc: <stable@vger.kernel.org> # 5.9-rc1+ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1598348388-2518-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 87fe29b upstream. Move all allocations outside of the regulator_lock()ed section. ====================================================== WARNING: possible circular locking dependency detected 5.7.13+ torvalds#535 Not tainted ------------------------------------------------------ f2fs_discard-179:7/702 is trying to acquire lock: c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0 but task is already holding lock: cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: [...] -> #3 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire.part.11+0x40/0x50 fs_reclaim_acquire+0x24/0x28 __kmalloc_track_caller+0x54/0x218 kstrdup+0x40/0x5c create_regulator+0xf4/0x368 regulator_resolve_supply+0x1a0/0x200 regulator_register+0x9c8/0x163c [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock [...] Fixes: f8702f9 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8a39e8c ] When compiling with DEBUG=1 on Fedora 32 I'm getting crash for 'perf test signal': Program received signal SIGSEGV, Segmentation fault. 0x0000000000c68548 in __test_function () (gdb) bt #0 0x0000000000c68548 in __test_function () #1 0x00000000004d62e9 in test_function () at tests/bp_signal.c:61 #2 0x00000000004d689a in test__bp_signal (test=0xa8e280 <generic_ ... #3 0x00000000004b7d49 in run_test (test=0xa8e280 <generic_tests+1 ... #4 0x00000000004b7e7f in test_and_print (t=0xa8e280 <generic_test ... #5 0x00000000004b8927 in __cmd_test (argc=1, argv=0x7fffffffdce0, ... ... It's caused by the symbol __test_function being in the ".bss" section: $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [28] .bss NOBITS 0000000000c356a0 008346a0 00000000000511f8 0000000000000000 WA 0 0 32 $ nm perf | grep __test_function 0000000000c68548 B __test_function I guess most of the time we're just lucky the inline asm ended up in the ".text" section, so making it specific explicit with push and pop section clauses. $ readelf -a ./perf | less [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [13] .text PROGBITS 0000000000431240 00031240 0000000000306faa 0000000000000000 AX 0 0 16 $ nm perf | grep __test_function 00000000004d62c8 T __test_function Committer testing: $ readelf -wi ~/bin/perf | grep producer -m1 <c> DW_AT_producer : (indirect string, offset: 0x254a): GNU C99 10.2.1 20200723 (Red Hat 10.2.1-1) -mtune=generic -march=x86-64 -ggdb3 -std=gnu99 -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ^^^^^ ^^^^^ ^^^^^ $ Before: $ perf test signal 20: Breakpoint overflow signal handler : FAILED! $ After: $ perf test signal 20: Breakpoint overflow signal handler : Ok $ Fixes: 8fd34e1 ("perf test: Improve bp_signal") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200911130005.1842138-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 22fe5a2 ] The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 torvalds#10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 torvalds#11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 torvalds#12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 torvalds#13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 torvalds#10 0x559fbbc0109b in run_test tests/builtin-test.c:410 torvalds#11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 torvalds#12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 torvalds#13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 torvalds#14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 torvalds#15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 torvalds#16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 torvalds#17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 torvalds#18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 torvalds#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 torvalds#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 torvalds#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 torvalds#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 843d926 ] syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842e ("net/ipv6: Add fib6_null_entry") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

@offset

commit 64b7f67 upstream. On setxattr() syscall path due to an apprent typo the size of a dynamically allocated memory chunk for storing struct smb2_file_full_ea_info object is computed incorrectly, to be more precise the first addend is the size of a pointer instead of the wanted object size. Coincidentally it makes no difference on 64-bit platforms, however on 32-bit targets the following memcpy() writes 4 bytes of data outside of the dynamically allocated memory. ============================================================================= BUG kmalloc-16 (Not tainted): Redzone overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201 INFO: Object 0x6f171df3 @offset=352 fp=0x00000000 Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi Redzone 79e69a6f: 73 68 32 0a sh2. Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: dump_stack+0x54/0x6e print_trailer+0x12c/0x134 check_bytes_and_report.cold+0x3e/0x69 check_object+0x18c/0x250 free_debug_processing+0xfe/0x230 __slab_free+0x1c0/0x300 kfree+0x1d3/0x220 smb2_set_ea+0x27d/0x540 cifs_xattr_set+0x57f/0x620 __vfs_setxattr+0x4e/0x60 __vfs_setxattr_noperm+0x4e/0x100 __vfs_setxattr_locked+0xae/0xd0 vfs_setxattr+0x4e/0xe0 setxattr+0x12c/0x1a0 path_setxattr+0xa4/0xc0 __ia32_sys_lsetxattr+0x1d/0x20 __do_fast_syscall_32+0x40/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 Fixes: 5517554 ("cifs: Add support for writing attributes on SMB2+") Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a466c85 ] When closing and freeing the source device we could end up doing our final blkdev_put() on the bdev, which will grab the bd_mutex. As such we want to be holding as few locks as possible, so move this call outside of the dev_replace->lock_finishing_cancel_unmount lock. Since we're modifying the fs_devices we need to make sure we're holding the uuid_mutex here, so take that as well. There's a report from syzbot probably hitting one of the cases where the bd_mutex and device_list_mutex are taken in the wrong order, however it's not with device replace, like this patch fixes. As there's no reproducer available so far, we can't verify the fix. https://lore.kernel.org/lkml/000000000000fc04d105afcf86d7@google.com/ dashboard link: https://syzkaller.appspot.com/bug?extid=84a0634dc5d21d488419 WARNING: possible circular locking dependency detected 5.9.0-rc5-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.0/6878 is trying to acquire lock: ffff88804c17d780 (&bdev->bd_mutex){+.+.}-{3:3}, at: blkdev_put+0x30/0x520 fs/block_dev.c:1804 but task is already holding lock: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 btrfs_finish_chunk_alloc+0x281/0xf90 fs/btrfs/volumes.c:5255 btrfs_create_pending_block_groups+0x2f3/0x700 fs/btrfs/block-group.c:2109 __btrfs_end_transaction+0xf5/0x690 fs/btrfs/transaction.c:916 find_free_extent_update_loop fs/btrfs/extent-tree.c:3807 [inline] find_free_extent+0x23b7/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #3 (sb_internal#2){.+.+}-{0:0}: percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write+0x234/0x470 fs/super.c:1672 sb_start_intwrite include/linux/fs.h:1690 [inline] start_transaction+0xbe7/0x1170 fs/btrfs/transaction.c:624 find_free_extent_update_loop fs/btrfs/extent-tree.c:3789 [inline] find_free_extent+0x25e1/0x2e60 fs/btrfs/extent-tree.c:4127 btrfs_reserve_extent+0x166/0x460 fs/btrfs/extent-tree.c:4206 cow_file_range+0x3de/0x9b0 fs/btrfs/inode.c:1063 btrfs_run_delalloc_range+0x2cf/0x1410 fs/btrfs/inode.c:1838 writepage_delalloc+0x150/0x460 fs/btrfs/extent_io.c:3439 __extent_writepage+0x441/0xd00 fs/btrfs/extent_io.c:3653 extent_write_cache_pages.constprop.0+0x69d/0x1040 fs/btrfs/extent_io.c:4249 extent_writepages+0xcd/0x2b0 fs/btrfs/extent_io.c:4370 do_writepages+0xec/0x290 mm/page-writeback.c:2352 __writeback_single_inode+0x125/0x1400 fs/fs-writeback.c:1461 writeback_sb_inodes+0x53d/0xf40 fs/fs-writeback.c:1721 wb_writeback+0x2ad/0xd40 fs/fs-writeback.c:1894 wb_do_writeback fs/fs-writeback.c:2039 [inline] wb_workfn+0x2dc/0x13e0 fs/fs-writeback.c:2080 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 -> #2 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}: __flush_work+0x60e/0xac0 kernel/workqueue.c:3041 wb_shutdown+0x180/0x220 mm/backing-dev.c:355 bdi_unregister+0x174/0x590 mm/backing-dev.c:872 del_gendisk+0x820/0xa10 block/genhd.c:933 loop_remove drivers/block/loop.c:2192 [inline] loop_control_ioctl drivers/block/loop.c:2291 [inline] loop_control_ioctl+0x3b1/0x480 drivers/block/loop.c:2257 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (loop_ctl_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 lo_open+0x19/0xd0 drivers/block/loop.c:1893 __blkdev_get+0x759/0x1aa0 fs/block_dev.c:1507 blkdev_get fs/block_dev.c:1639 [inline] blkdev_open+0x227/0x300 fs/block_dev.c:1753 do_dentry_open+0x4b9/0x11b0 fs/open.c:817 do_open fs/namei.c:3251 [inline] path_openat+0x1b9a/0x2730 fs/namei.c:3368 do_filp_open+0x17e/0x3c0 fs/namei.c:3395 do_sys_openat2+0x16d/0x420 fs/open.c:1168 do_sys_open fs/open.c:1184 [inline] __do_sys_open fs/open.c:1192 [inline] __se_sys_open fs/open.c:1188 [inline] __x64_sys_open+0x119/0x1c0 fs/open.c:1188 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&bdev->bd_mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &bdev->bd_mutex --> sb_internal#2 --> &fs_devs->device_list_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_devs->device_list_mutex); lock(sb_internal#2); lock(&fs_devs->device_list_mutex); lock(&bdev->bd_mutex); *** DEADLOCK *** 3 locks held by syz-executor.0/6878: #0: ffff88809070c0e0 (&type->s_umount_key#70){++++}-{3:3}, at: deactivate_super+0xa5/0xd0 fs/super.c:365 #1: ffffffff8a5b37a8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_close_devices+0x23/0x1f0 fs/btrfs/volumes.c:1178 #2: ffff8880908cfce0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: close_fs_devices.part.0+0x2e/0x800 fs/btrfs/volumes.c:1159 stack backtrace: CPU: 0 PID: 6878 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 check_noncircular+0x324/0x3e0 kernel/locking/lockdep.c:1827 check_prev_add kernel/locking/lockdep.c:2496 [inline] check_prevs_add kernel/locking/lockdep.c:2601 [inline] validate_chain kernel/locking/lockdep.c:3218 [inline] __lock_acquire+0x2a96/0x5780 kernel/locking/lockdep.c:4426 lock_acquire+0x1f3/0xae0 kernel/locking/lockdep.c:5006 __mutex_lock_common kernel/locking/mutex.c:956 [inline] __mutex_lock+0x134/0x10e0 kernel/locking/mutex.c:1103 blkdev_put+0x30/0x520 fs/block_dev.c:1804 btrfs_close_bdev fs/btrfs/volumes.c:1117 [inline] btrfs_close_bdev fs/btrfs/volumes.c:1107 [inline] btrfs_close_one_device fs/btrfs/volumes.c:1133 [inline] close_fs_devices.part.0+0x1a4/0x800 fs/btrfs/volumes.c:1161 close_fs_devices fs/btrfs/volumes.c:1193 [inline] btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179 close_ctree+0x688/0x6cb fs/btrfs/disk-io.c:4149 generic_shutdown_super+0x144/0x370 fs/super.c:464 kill_anon_super+0x36/0x60 fs/super.c:1108 btrfs_kill_super+0x38/0x50 fs/btrfs/super.c:2265 deactivate_locked_super+0x94/0x160 fs/super.c:335 deactivate_super+0xad/0xd0 fs/super.c:366 cleanup_mnt+0x3a3/0x530 fs/namespace.c:1118 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x460027 RSP: 002b:00007fff59216328 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 0000000000076035 RCX: 0000000000460027 RDX: 0000000000403188 RSI: 0000000000000002 RDI: 00007fff592163d0 RBP: 0000000000000333 R08: 0000000000000000 R09: 000000000000000b R10: 0000000000000005 R11: 0000000000000246 R12: 00007fff59217460 R13: 0000000002df2a60 R14: 0000000000000000 R15: 00007fff59217460 Signed-off-by: Josef Bacik <josef@toxicpanda.com> [ add syzbot reference ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 27dada0 ] The defer ops code has been finishing items in the wrong order -- if a top level defer op creates items A and B, and finishing item A creates more defer ops A1 and A2, we'll put the new items on the end of the chain and process them in the order A B A1 A2. This is kind of weird, since it's convenient for programmers to be able to think of A and B as an ordered sequence where all the sub-tasks for A must finish before we move on to B, e.g. A A1 A2 D. Right now, our log intent items are not so complex that this matters, but this will become important for the atomic extent swapping patchset. In order to maintain correct reference counting of extents, we have to unmap and remap extents in that order, and we want to complete that work before moving on to the next range that the user wants to swap. This patch fixes defer ops to satsify that requirement. The primary symptom of the incorrect order was noticed in an early performance analysis of the atomic extent swap code. An astonishingly large number of deferred work items accumulated when userspace requested an atomic update of two very fragmented files. The cause of this was traced to the same ordering bug in the inner loop of xfs_defer_finish_noroll. If the ->finish_item method of a deferred operation queues new deferred operations, those new deferred ops are appended to the tail of the pending work list. To illustrate, say that a caller creates a transaction t0 with four deferred operations D0-D3. The first thing defer ops does is roll the transaction to t1, leaving us with: t1: D0(t0), D1(t0), D2(t0), D3(t0) Let's say that finishing each of D0-D3 will create two new deferred ops. After finish D0 and roll, we'll have the following chain: t2: D1(t0), D2(t0), D3(t0), d4(t1), d5(t1) d4 and d5 were logged to t1. Notice that while we're about to start work on D1, we haven't actually completed all the work implied by D0 being finished. So far we've been careful (or lucky) to structure the dfops callers such that D1 doesn't depend on d4 or d5 being finished, but this is a potential logic bomb. There's a second problem lurking. Let's see what happens as we finish D1-D3: t3: D2(t0), D3(t0), d4(t1), d5(t1), d6(t2), d7(t2) t4: D3(t0), d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3) t5: d4(t1), d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) Let's say that d4-d11 are simple work items that don't queue any other operations, which means that we can complete each d4 and roll to t6: t6: d5(t1), d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) t7: d6(t2), d7(t2), d8(t3), d9(t3), d10(t4), d11(t4) ... t11: d10(t4), d11(t4) t12: d11(t4) <done> When we try to roll to transaction torvalds#12, we're holding defer op d11, which we logged way back in t4. This means that the tail of the log is pinned at t4. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot get roll to t11 because there isn't enough space left before we'd run into t4. Let's shift back to the original failure. I mentioned before that I discovered this flaw while developing the atomic file update code. In that scenario, we have a defer op (D0) that finds a range of file blocks to remap, creates a handful of new defer ops to do that, and then asks to be continued with however much work remains. So, D0 is the original swapext deferred op. The first thing defer ops does is rolls to t1: t1: D0(t0) We try to finish D0, logging d1 and d2 in the process, but can't get all the work done. We log a done item and a new intent item for the work that D0 still has to do, and roll to t2: t2: D0'(t1), d1(t1), d2(t1) We roll and try to finish D0', but still can't get all the work done, so we log a done item and a new intent item for it, requeue D0 a second time, and roll to t3: t3: D0''(t2), d1(t1), d2(t1), d3(t2), d4(t2) If it takes 48 more rolls to complete D0, then we'll finally dispense with D0 in t50: t50: D<fifty primes>(t49), d1(t1), ..., d102(t50) We then try to roll again to get a chain like this: t51: d1(t1), d2(t1), ..., d101(t50), d102(t50) ... t152: d102(t50) <done> Notice that in rolling to transaction torvalds#51, we're holding on to a log intent item for d1 that was logged in transaction #1. This means that the tail of the log is pinned at t1. If the log is very small or there are a lot of other threads updating metadata, this means that we might have wrapped the log and cannot roll to t51 because there isn't enough space left before we'd run into t1. This is of course problem #2 again. But notice the third problem with this scenario: we have 102 defer ops tied to this transaction! Each of these items are backed by pinned kernel memory, which means that we risk OOM if the chains get too long. Yikes. Problem #1 is a subtle logic bomb that could hit someone in the future; problem #2 applies (rarely) to the current upstream, and problem #3 applies to work under development. This is not how incremental deferred operations were supposed to work. The dfops design of logging in the same transaction an intent-done item and a new intent item for the work remaining was to make it so that we only have to juggle enough deferred work items to finish that one small piece of work. Deferred log item recovery will find that first unfinished work item and restart it, no matter how many other intent items might follow it in the log. Therefore, it's ok to put the new intents at the start of the dfops chain. For the first example, the chains look like this: t2: d4(t1), d5(t1), D1(t0), D2(t0), D3(t0) t3: d5(t1), D1(t0), D2(t0), D3(t0) ... t9: d9(t7), D3(t0) t10: D3(t0) t11: d10(t10), d11(t10) t12: d11(t10) For the second example, the chains look like this: t1: D0(t0) t2: d1(t1), d2(t1), D0'(t1) t3: d2(t1), D0'(t1) t4: D0'(t1) t5: d1(t4), d2(t4), D0''(t4) ... t148: D0<50 primes>(t147) t149: d101(t148), d102(t148) t150: d102(t148) <done> This actually sucks more for pinning the log tail (we try to roll to t10 while holding an intent item that was logged in t1) but we've solved problem #1. We've also reduced the maximum chain length from: sum(all the new items) + nr_original_items to: max(new items that each original item creates) + nr_original_items This solves problem #3 by sharply reducing the number of defer ops that can be attached to a transaction at any given time. The change makes the problem of log tail pinning worse, but is improvement we need to solve problem #2. Actually solving #2, however, is left to the next patch. Note that a subsequent analysis of some hard-to-trigger reflink and COW livelocks on extremely fragmented filesystems (or systems running a lot of IO threads) showed the same symptoms -- uncomfortably large numbers of incore deferred work items and occasional stalls in the transaction grant code while waiting for log reservations. I think this patch and the next one will also solve these problems. As originally written, the code used list_splice_tail_init instead of list_splice_init, so change that, and leave a short comment explaining our actions. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ca10845 upstream. While running btrfs/061, btrfs/073, btrfs/078, or btrfs/178 we hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc3+ #4 Not tainted ------------------------------------------------------ kswapd0/100 is trying to acquire lock: ffff96ecc22ef4a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330 but task is already holding lock: ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x65/0x80 slab_pre_alloc_hook.constprop.0+0x20/0x200 kmem_cache_alloc+0x37/0x270 alloc_inode+0x82/0xb0 iget_locked+0x10d/0x2c0 kernfs_get_inode+0x1b/0x130 kernfs_get_tree+0x136/0x240 sysfs_get_tree+0x16/0x40 vfs_get_tree+0x28/0xc0 path_mount+0x434/0xc00 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (kernfs_mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7e0 kernfs_add_one+0x23/0x150 kernfs_create_link+0x63/0xa0 sysfs_do_create_link_sd+0x5e/0xd0 btrfs_sysfs_add_devices_dir+0x81/0x130 btrfs_init_new_device+0x67f/0x1250 btrfs_ioctl+0x1ef/0x2e20 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7e0 btrfs_chunk_alloc+0x125/0x3a0 find_free_extent+0xdf6/0x1210 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb0/0x310 alloc_tree_block_no_bg_flush+0x4a/0x60 __btrfs_cow_block+0x11a/0x530 btrfs_cow_block+0x104/0x220 btrfs_search_slot+0x52e/0x9d0 btrfs_insert_empty_items+0x64/0xb0 btrfs_insert_delayed_items+0x90/0x4f0 btrfs_commit_inode_delayed_items+0x93/0x140 btrfs_log_inode+0x5de/0x2020 btrfs_log_inode_parent+0x429/0xc90 btrfs_log_new_name+0x95/0x9b btrfs_rename2+0xbb9/0x1800 vfs_rename+0x64f/0x9f0 do_renameat2+0x320/0x4e0 __x64_sys_rename+0x1f/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: __lock_acquire+0x119c/0x1fc0 lock_acquire+0xa7/0x3d0 __mutex_lock+0x7e/0x7e0 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 kthread+0x138/0x160 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> kernfs_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(kernfs_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/100: #0: ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8dd65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290 #2: ffff96ed2ade30e0 (&type->s_umount_key#36){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0 stack backtrace: CPU: 0 PID: 100 Comm: kswapd0 Not tainted 5.9.0-rc3+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb8 check_noncircular+0x12d/0x150 __lock_acquire+0x119c/0x1fc0 lock_acquire+0xa7/0x3d0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 __mutex_lock+0x7e/0x7e0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? lock_acquire+0xa7/0x3d0 ? find_held_lock+0x2b/0x80 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 ? _raw_spin_unlock_irqrestore+0x41/0x50 ? add_wait_queue_exclusive+0x70/0x70 ? balance_pgdat+0x670/0x670 kthread+0x138/0x160 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 This happens because we are holding the chunk_mutex at the time of adding in a new device. However we only need to hold the device_list_mutex, as we're going to iterate over the fs_devices devices. Move the sysfs init stuff outside of the chunk_mutex to get rid of this lockdep splat. CC: stable@vger.kernel.org # 4.4.x: f3cd2c5: btrfs: sysfs, rename device_link add/remove functions CC: stable@vger.kernel.org # 4.4.x Reported-by: David Sterba <dsterba@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 66d204a upstream. Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 torvalds#10 do_syscall_64+0x33/0x77 torvalds#11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7837fa8 upstream. Dave reported a problem with my rwsem conversion patch where we got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-default+ #1297 Not tainted ------------------------------------------------------ kswapd0/76 is trying to acquire lock: ffff9d5d25df2530 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] but task is already holding lock: ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 fs_reclaim_acquire.part.0+0x25/0x30 kmem_cache_alloc+0x30/0x9c0 alloc_inode+0x81/0x90 iget_locked+0xcd/0x1a0 kernfs_get_inode+0x1b/0x130 kernfs_get_tree+0x136/0x210 sysfs_get_tree+0x1a/0x50 vfs_get_tree+0x1d/0xb0 path_mount+0x70f/0xa80 do_mount+0x75/0x90 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (kernfs_mutex){+.+.}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 __mutex_lock+0xa0/0xaf0 kernfs_add_one+0x23/0x150 kernfs_create_dir_ns+0x58/0x80 sysfs_create_dir_ns+0x70/0xd0 kobject_add_internal+0xbb/0x2d0 kobject_add+0x7a/0xd0 btrfs_sysfs_add_block_group_type+0x141/0x1d0 [btrfs] btrfs_read_block_groups+0x1f1/0x8c0 [btrfs] open_ctree+0x981/0x1108 [btrfs] btrfs_mount_root.cold+0xe/0xb0 [btrfs] legacy_get_tree+0x2d/0x60 vfs_get_tree+0x1d/0xb0 fc_mount+0xe/0x40 vfs_kern_mount.part.0+0x71/0x90 btrfs_mount+0x13b/0x3e0 [btrfs] legacy_get_tree+0x2d/0x60 vfs_get_tree+0x1d/0xb0 path_mount+0x70f/0xa80 do_mount+0x75/0x90 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (btrfs-extent-00){++++}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot+0x6d4/0xfd0 [btrfs] check_committed_ref+0x69/0x200 [btrfs] btrfs_cross_ref_exist+0x65/0xb0 [btrfs] run_delalloc_nocow+0x446/0x9b0 [btrfs] btrfs_run_delalloc_range+0x61/0x6a0 [btrfs] writepage_delalloc+0xae/0x160 [btrfs] __extent_writepage+0x262/0x420 [btrfs] extent_write_cache_pages+0x2b6/0x510 [btrfs] extent_writepages+0x43/0x90 [btrfs] do_writepages+0x40/0xe0 __writeback_single_inode+0x62/0x610 writeback_sb_inodes+0x20f/0x500 wb_writeback+0xef/0x4a0 wb_do_writeback+0x49/0x2e0 wb_workfn+0x81/0x340 process_one_work+0x233/0x5d0 worker_thread+0x50/0x3b0 kthread+0x137/0x150 ret_from_fork+0x1f/0x30 -> #1 (btrfs-fs-00){++++}-{3:3}: __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 down_read_nested+0x45/0x220 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot+0x6d4/0xfd0 [btrfs] btrfs_lookup_inode+0x3a/0xc0 [btrfs] __btrfs_update_delayed_inode+0x93/0x2c0 [btrfs] __btrfs_commit_inode_delayed_items+0x7de/0x850 [btrfs] __btrfs_run_delayed_items+0x8e/0x140 [btrfs] btrfs_commit_transaction+0x367/0xbc0 [btrfs] btrfs_mksubvol+0x2db/0x470 [btrfs] btrfs_mksnapshot+0x7b/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] btrfs_ioctl+0xd0b/0x2690 [btrfs] __x64_sys_ioctl+0x6f/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add+0x91/0xc60 validate_chain+0xa6e/0x2a20 __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 __mutex_lock+0xa0/0xaf0 __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x3cc/0x560 [btrfs] evict+0xd6/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x121/0x1a0 do_shrink_slab+0x16d/0x3b0 shrink_slab+0xb1/0x2e0 shrink_node+0x230/0x6a0 balance_pgdat+0x325/0x750 kswapd+0x206/0x4d0 kthread+0x137/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> kernfs_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(kernfs_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/76: #0: ffffffffa40cbba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffffa40b8b58 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0 #2: ffff9d5d322390e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50 stack backtrace: CPU: 2 PID: 76 Comm: kswapd0 Not tainted 5.9.0-default+ #1297 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x77/0x97 check_noncircular+0xff/0x110 ? save_trace+0x50/0x470 check_prev_add+0x91/0xc60 validate_chain+0xa6e/0x2a20 ? save_trace+0x50/0x470 __lock_acquire+0x582/0xac0 lock_acquire+0xca/0x430 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] __mutex_lock+0xa0/0xaf0 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] ? __lock_acquire+0x582/0xac0 ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] ? btrfs_evict_inode+0x30b/0x560 [btrfs] ? __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs] btrfs_evict_inode+0x3cc/0x560 [btrfs] evict+0xd6/0x1c0 dispose_list+0x48/0x70 prune_icache_sb+0x54/0x80 super_cache_scan+0x121/0x1a0 do_shrink_slab+0x16d/0x3b0 shrink_slab+0xb1/0x2e0 shrink_node+0x230/0x6a0 balance_pgdat+0x325/0x750 kswapd+0x206/0x4d0 ? finish_wait+0x90/0x90 ? balance_pgdat+0x750/0x750 kthread+0x137/0x150 ? kthread_mod_delayed_work+0xc0/0xc0 ret_from_fork+0x1f/0x30 This happens because we are still holding the path open when we start adding the sysfs files for the block groups, which creates a dependency on fs_reclaim via the tree lock. Fix this by dropping the path before we start doing anything with sysfs. Reported-by: David Sterba <dsterba@suse.com> CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5223cc6 ] When enabling qgroups we walk the tree_root and then add a qgroup item for every root that we have. This creates a lock dependency on the tree_root and qgroup_root, which results in the following lockdep splat (with tree locks using rwsem), eg. in tests btrfs/017 or btrfs/022: ====================================================== WARNING: possible circular locking dependency detected 5.9.0-default+ #1299 Not tainted ------------------------------------------------------ btrfs/24552 is trying to acquire lock: ffff9142dfc5f630 (btrfs-quota-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] but task is already holding lock: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 down_read_nested+0x46/0x130 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_item+0x6e/0x140 [btrfs] btrfs_create_tree+0x1cb/0x240 [btrfs] btrfs_quota_enable+0xcd/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-quota-00){++++}-{3:3}: check_prev_add+0x91/0xc30 validate_chain+0x491/0x750 __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 down_read_nested+0x46/0x130 __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] add_qgroup_item.part.0+0x72/0x210 [btrfs] btrfs_quota_enable+0x3bb/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(btrfs-quota-00); lock(btrfs-root-00); lock(btrfs-quota-00); *** DEADLOCK *** 5 locks held by btrfs/24552: #0: ffff9142df431478 (sb_writers#10){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0xa0 #1: ffff9142f9b10cc0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl_quota_ctl+0x7b/0xe0 [btrfs] #2: ffff9142f9b11a08 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_enable+0x3b/0x790 [btrfs] #3: ffff9142df431698 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x406/0x510 [btrfs] #4: ffff9142dfc5d0b0 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] stack backtrace: CPU: 1 PID: 24552 Comm: btrfs Not tainted 5.9.0-default+ #1299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack+0x77/0x97 check_noncircular+0xf3/0x110 check_prev_add+0x91/0xc30 validate_chain+0x491/0x750 __lock_acquire+0x3fb/0x730 lock_acquire.part.0+0x6a/0x130 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] ? lock_acquire+0xc4/0x140 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] down_read_nested+0x46/0x130 ? __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] __btrfs_tree_read_lock+0x35/0x1c0 [btrfs] ? btrfs_root_node+0xd9/0x200 [btrfs] __btrfs_read_lock_root_node+0x3a/0x50 [btrfs] btrfs_search_slot_get_root+0x11d/0x290 [btrfs] btrfs_search_slot+0xc3/0x9f0 [btrfs] btrfs_insert_empty_items+0x58/0xa0 [btrfs] add_qgroup_item.part.0+0x72/0x210 [btrfs] btrfs_quota_enable+0x3bb/0x790 [btrfs] btrfs_ioctl_quota_ctl+0xc9/0xe0 [btrfs] __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by dropping the path whenever we find a root item, add the qgroup item, and then re-lookup the root item we found and continue processing roots. Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 49d11be ] I got the following lockdep splat with tree locks converted to rwsem patches on btrfs/104: ====================================================== WARNING: possible circular locking dependency detected 5.9.0+ torvalds#102 Not tainted ------------------------------------------------------ btrfs-cleaner/903 is trying to acquire lock: ffff8e7fab6ffe30 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x32/0x170 but task is already holding lock: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&fs_info->commit_root_sem){++++}-{3:3}: down_read+0x40/0x130 caching_thread+0x53/0x5a0 btrfs_work_helper+0xfa/0x520 process_one_work+0x238/0x540 worker_thread+0x55/0x3c0 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 -> #2 (&caching_ctl->mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7b0 btrfs_cache_block_group+0x1e0/0x510 find_free_extent+0xb6e/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&space_info->groups_sem){++++}-{3:3}: down_read+0x40/0x130 find_free_extent+0x2ed/0x12f0 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb1/0x330 alloc_tree_block_no_bg_flush+0x4f/0x60 __btrfs_cow_block+0x11d/0x580 btrfs_cow_block+0x10c/0x220 commit_cowonly_roots+0x47/0x2e0 btrfs_commit_transaction+0x595/0xbd0 sync_filesystem+0x74/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x36/0xa0 cleanup_mnt+0x12d/0x190 task_work_run+0x5c/0xa0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x54/0x280 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1167/0x2150 lock_acquire+0xb9/0x3d0 down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 btrfs_find_root+0x35/0x1b0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 kthread+0x13a/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: btrfs-root-00 --> &caching_ctl->mutex --> &fs_info->commit_root_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->commit_root_sem); lock(&caching_ctl->mutex); lock(&fs_info->commit_root_sem); lock(btrfs-root-00); *** DEADLOCK *** 3 locks held by btrfs-cleaner/903: #0: ffff8e7fab628838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: cleaner_kthread+0x6e/0x140 #1: ffff8e7faadac640 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x40b/0x5c0 #2: ffff8e7fab628a88 (&fs_info->commit_root_sem){++++}-{3:3}, at: btrfs_find_all_roots+0x41/0x80 stack backtrace: CPU: 0 PID: 903 Comm: btrfs-cleaner Not tainted 5.9.0+ torvalds#102 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 __lock_acquire+0x1167/0x2150 ? __bfs+0x42/0x210 lock_acquire+0xb9/0x3d0 ? __btrfs_tree_read_lock+0x32/0x170 down_read_nested+0x43/0x130 ? __btrfs_tree_read_lock+0x32/0x170 __btrfs_tree_read_lock+0x32/0x170 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x614/0x9d0 ? find_held_lock+0x2b/0x80 btrfs_find_root+0x35/0x1b0 ? do_raw_spin_unlock+0x4b/0xa0 btrfs_read_tree_root+0x61/0x120 btrfs_get_root_ref+0x14b/0x600 find_parent_nodes+0x3e6/0x1b30 btrfs_find_all_roots_safe+0xb4/0x130 btrfs_find_all_roots+0x60/0x80 btrfs_qgroup_trace_extent_post+0x27/0x40 btrfs_add_delayed_data_ref+0x3fd/0x460 btrfs_free_extent+0x42/0x100 __btrfs_mod_ref+0x1d7/0x2f0 walk_up_proc+0x11c/0x400 walk_up_tree+0xf0/0x180 btrfs_drop_snapshot+0x1c7/0x780 ? btrfs_clean_one_deleted_snapshot+0x73/0x110 btrfs_clean_one_deleted_snapshot+0xfb/0x110 cleaner_kthread+0xd4/0x140 ? btrfs_alloc_root+0x50/0x50 kthread+0x13a/0x150 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 BTRFS info (device sdb): disk space caching is enabled BTRFS info (device sdb): has skinny extents This happens because qgroups does a backref lookup when we create a delayed ref. From here it may have to look up a root from an indirect ref, which does a normal lookup on the tree_root, which takes the read lock on the tree_root nodes. To fix this we need to add a variant for looking up roots that searches the commit root of the tree_root. Then when we do the backref search using the commit root we are sure to not take any locks on the tree_root nodes. This gets rid of the lockdep splat when running btrfs/104. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3ad216e ] When afs_write_end() is called with copied == 0, it tries to set the dirty region, but there's no way to actually encode a 0-length region in the encoding in page->private. "0,0", for example, indicates a 1-byte region at offset 0. The maths miscalculates this and sets it incorrectly. Fix it to just do nothing but unlock and put the page in this case. We don't actually need to mark the page dirty as nothing presumably changed. Fixes: 65dd2d6 ("afs: Alter dirty range encoding in page->private") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e773ca7 ] Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eb2667b ] Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create(): [ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3 [ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 59.603673] Call Trace: [ 59.604286] dump_stack+0x107/0x163 [ 59.605237] ubsan_epilogue+0xb/0x5a [ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e [ 59.607335] ? lock_downgrade+0x6c0/0x6c0 [ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 59.609166] io_uring_create.cold+0x99/0x149 [ 59.610114] io_uring_setup+0xd6/0x140 [ 59.610975] ? io_uring_create+0x2510/0x2510 [ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400 [ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80 [ 59.614038] ? trace_hardirqs_on+0x5b/0x180 [ 59.615056] do_syscall_64+0x2d/0x40 [ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 59.617007] RIP: 0033:0x7f2bb8a0b239 This is caused by roundup_pow_of_two() if the input entries larger enough, e.g. 2^32-1. For sq_entries, it will check first and we allow at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do round up first, that may overflow and truncate it to 0, which is not the expected behavior. So check the cq size first and then do round up. Fixes: 88ec321 ("io_uring: round-up cq size before comparing with rounded sq size") Reported-by: Abaci Fuzz <abaci@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

capebus: Geiger Cape config bugfixs

83ada81

The display of 'vsense-name' default is incorrect. Signed-off-by: Matt Ranostay <mranostay@gmail.com>

koenkooi closed this Nov 19, 2012

koenkooi pushed a commit that referenced this pull request Dec 18, 2012

drbd: Take a reference on tconn when finding a tconn by name

0ace9df

Rule #3 of kref.txt Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

capebus: Geiger Cape config bugfixs #3

capebus: Geiger Cape config bugfixs #3

mranostay commented Nov 19, 2012

koenkooi commented Nov 19, 2012

capebus: Geiger Cape config bugfixs #3

capebus: Geiger Cape config bugfixs #3

Conversation

mranostay commented Nov 19, 2012

koenkooi commented Nov 19, 2012