General Settings
Up to date as of version 1.6
In this section you can change some general settings, that does not really fit under any of the other sections:
The device settings are explained in the First Startup section, however here you can set the COM port and the baud rate.
Here is a number of settings, starting with the Auto send default setup next time, checking this checkbox will make sure that next time that ArduLED starts, it will connect to the Arduino and send the setup by itself. This requires that there is an autosaved setup file, wich are being made when you manually press the send setup button. Then there is the Enable Server at Startup Checkbox, checking it will automatically start the server next time ArduLED starts, this is usefull if you activly use the app. The Start at mode combobox, sets what section to jump to after ArduLED have send the setup. There is also a Open menu aswell? checkbox, wich tells if the visual menu should be opened aswell. Then there are four checkboxes next, telling if the autoloaded savefiles for Animation and Instruction should be startet automatically and if they should be looped. If you have checked both checkboxes, then ArduLED will prioritise the Instructions and not run the Animations.
Here you find the RGB Color order, this setting is only usfull for people who have problems with what color there should be shown, and what color is being shown. Normally having it set to RGB should be fine, but some will find the need to set it to RBG, since not all LEDs are designed the same way.