Change HOST/PORT env to TARGET_HOST / TARGET_PORT

README.md

@@ -45,9 +45,9 @@ configured by our [Network Observability Operator](https://github.com/netobserv/
 
 Anyway you can run it directly as an executable from your command line:
 
-```
-export HOST=...
-export PORT=...
+```bash
+export TARGET_HOST=...
+export TARGET_PORT=...
 sudo -E bin/netobserv-ebpf-agent
 ```
 

deployments/flp-daemonset-cap.yml

@@ -32,11 +32,11 @@ spec:
               - SYS_RESOURCE
           runAsUser: 0
         env:
-          - name: HOST
+          - name: TARGET_HOST
             valueFrom:
               fieldRef:
                 fieldPath: status.hostIP
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
 ---
 apiVersion: apps/v1

deployments/flp-daemonset.yml

@@ -27,11 +27,11 @@ spec:
           privileged: true
           runAsUser: 0
         env:
-          - name: HOST
+          - name: TARGET_HOST
             valueFrom:
               fieldRef:
                 fieldPath: status.hostIP
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
 ---
 apiVersion: apps/v1

deployments/flp-service.yml

@@ -27,9 +27,9 @@ spec:
           privileged: true
           runAsUser: 0
         env:
-          - name: HOST
+          - name: TARGET_HOST
             value: "flp"
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
 ---
 apiVersion: v1

docs/config.md

@@ -5,8 +5,8 @@ _Please also refer to the file [config.go](../pkg/agent/config.go) which is the
 The following environment variables are available to configure the NetObserv eBFP Agent:
 
 * `EXPORT` (default: `grpc`). Flows' exporter protocol. Accepted values are: `grpc`, `kafka`, `ipfix+udp`, `ipfix+tcp` or `direct-flp`. In `direct-flp` mode, [flowlogs-pipeline](https://github.com/netobserv/flowlogs-pipeline) is run internally from the agent, allowing more filtering, transformations and exporting options.
-* `HOST` (required if `EXPORT` is `grpc` or `ipfix+[tcp/udp]`). Host name or IP of the Flow collector.
-* `PORT` (required if `EXPORT` is `grpc` or `ipfix+[tcp/udp]`). Port of the flow collector.
+* `TARGET_HOST` (required if `EXPORT` is `grpc` or `ipfix+[tcp/udp]`). Host name or IP of the target flow or packet collector.
+* `TARGET_PORT` (required if `EXPORT` is `grpc` or `ipfix+[tcp/udp]`). Port of the target flow or packet collector.
 * `GRPC_MESSAGE_MAX_FLOWS` (default: `10000`). Specifies the limit, in number of flows, of each GRPC
   message. Messages larger than that number will be split and submitted sequentially.
 * `AGENT_IP` (optional). Allows overriding the reported Agent IP address on each flow.

e2e/cluster/base/04-agent.yml

@@ -26,11 +26,11 @@ spec:
             value: 200ms
           - name: LOG_LEVEL
             value: debug
-          - name: HOST
+          - name: TARGET_HOST
             valueFrom:
               fieldRef:
                 fieldPath: status.hostIP
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
         volumeMounts:
             - name: bpf-kernel-debug

e2e/ipfix/manifests/30-agent.yml

@@ -28,11 +28,11 @@ spec:
             value: 200ms
           - name: LOG_LEVEL
             value: debug
-          - name: HOST
+          - name: TARGET_HOST
             valueFrom:
               fieldRef:
                 fieldPath: status.hostIP
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
         volumeMounts:
             - name: bpf-kernel-debug

examples/flowlogs-dump/README.md

@@ -14,7 +14,7 @@ go build -mod vendor -o bin/flowlogs-dump-collector examples/flowlogs-dump/serve
 ```
 Start the agent using:
 ```bash
-sudo HOST=127.0.0.1 PORT=9999 ./bin/netobserv-ebpf-agent
+sudo TARGET_HOST=127.0.0.1 TARGET_PORT=9999 ./bin/netobserv-ebpf-agent
 ```
 
 Start the flowlogs-dump-collector using: (in a secondary shell)

examples/packetcapture-dump/README.md

@@ -19,7 +19,7 @@ Start the packetcapture-client using: (in a secondary shell)
 
 Start the agent using:
 ```bash
-sudo HOST=localhost PORT=9990 ENABLE_PCA=true PCA_FILTER=tcp,22 ./bin/netobserv-ebpf-agent
+sudo TARGET_HOST=localhost TARGET_PORT=9990 ENABLE_PCA=true PCA_FILTER=tcp,22 ./bin/netobserv-ebpf-agent
 ```
 
 You should see output such as:

examples/performance/deployment.yml

@@ -67,9 +67,9 @@ spec:
           value: call_error,cares_resolver,dns_resolver
         - name: GRPC_DNS_RESOLVER
           value: "ares"
-        - name: HOST
+        - name: TARGET_HOST
           value: "packet-counter"
-        - name: PORT
+        - name: TARGET_PORT
           value: "9999"
 #      resources:
 #        limits:

examples/systemd/netobserv-ebpf-agent

@@ -3,5 +3,5 @@
 # /etc/default/netobserv-ebpf-agent
 
 DIRECTION=both
-HOST=127.0.0.1
-PORT=9999
+TARGET_HOST=127.0.0.1
+TARGET_PORT=9999

pkg/agent/agent.go

@@ -294,11 +294,11 @@ func buildFlowExporter(cfg *Config, m *metrics.Metrics) (node.TerminalFunc[[]*fl
 }
 
 func buildGRPCExporter(cfg *Config, m *metrics.Metrics) (node.TerminalFunc[[]*flow.Record], error) {
-	if cfg.Host == "" || cfg.Port == 0 {
+	if cfg.TargetHost == "" || cfg.TargetPort == 0 {
 		return nil, fmt.Errorf("missing target host or port: %s:%d",
-			cfg.Host, cfg.Port)
+			cfg.TargetHost, cfg.TargetPort)
 	}
-	grpcExporter, err := exporter.StartGRPCProto(cfg.Host, cfg.Port, cfg.GRPCMessageMaxFlows, m)
+	grpcExporter, err := exporter.StartGRPCProto(cfg.TargetHost, cfg.TargetPort, cfg.GRPCMessageMaxFlows, m)
 	if err != nil {
 		return nil, err
 	}
@@ -364,11 +364,11 @@ func buildKafkaExporter(cfg *Config, m *metrics.Metrics) (node.TerminalFunc[[]*f
 }
 
 func buildIPFIXExporter(cfg *Config, proto string) (node.TerminalFunc[[]*flow.Record], error) {
-	if cfg.Host == "" || cfg.Port == 0 {
+	if cfg.TargetHost == "" || cfg.TargetPort == 0 {
 		return nil, fmt.Errorf("missing target host or port: %s:%d",
-			cfg.Host, cfg.Port)
+			cfg.TargetHost, cfg.TargetPort)
 	}
-	ipfix, err := exporter.StartIPFIXExporter(cfg.Host, cfg.Port, proto)
+	ipfix, err := exporter.StartIPFIXExporter(cfg.TargetHost, cfg.TargetPort, proto)
 	if err != nil {
 		return nil, err
 	}

pkg/agent/agent_test.go

@@ -29,10 +29,10 @@ func TestFlowsAgent_InvalidConfigs(t *testing.T) {
 		c: Config{Export: "foo"},
 	}, {
 		d: "GRPC: missing host",
-		c: Config{Export: "grpc", Port: 3333},
+		c: Config{Export: "grpc", TargetPort: 3333},
 	}, {
 		d: "GRPC: missing port",
-		c: Config{Export: "grpc", Host: "flp"},
+		c: Config{Export: "grpc", TargetHost: "flp"},
 	}, {
 		d: "Kafka: missing brokers",
 		c: Config{Export: "kafka"},

pkg/agent/config.go

@@ -42,11 +42,11 @@ type Config struct {
 	// Accepted values for Flows are: grpc (default), kafka, ipfix+udp, ipfix+tcp or direct-flp.
 	// Accepted values for Packets are: grpc (default) or tcp
 	Export string `env:"EXPORT" envDefault:"grpc"`
-	// Host is the host name or IP of the Flow collector, when the EXPORT variable is
+	// Host is the host name or IP of the flow or packet collector, when the EXPORT variable is
 	// set to "grpc"
-	Host string `env:"HOST"`
-	// Port is the port the Flow collector, when the EXPORT variable is set to "grpc"
-	Port int `env:"PORT"`
+	TargetHost string `env:"TARGET_HOST"`
+	// Port is the port the flow or packet collector, when the EXPORT variable is set to "grpc"
+	TargetPort int `env:"TARGET_PORT"`
 	// GRPCMessageMaxFlows specifies the limit, in number of flows, of each GRPC message. Messages
 	// larger than that number will be split and submitted sequentially.
 	GRPCMessageMaxFlows int `env:"GRPC_MESSAGE_MAX_FLOWS" envDefault:"10000"`
@@ -193,14 +193,14 @@ type Config struct {
 func manageDeprecatedConfigs(cfg *Config) {
 	if len(cfg.FlowsTargetHost) != 0 {
 		clog.Infof("Using deprecated FlowsTargetHost %s", cfg.FlowsTargetHost)
-		cfg.Host = cfg.FlowsTargetHost
+		cfg.TargetHost = cfg.FlowsTargetHost
 	}
 
 	if cfg.FlowsTargetPort != 0 {
 		clog.Infof("Using deprecated FlowsTargetPort %d", cfg.FlowsTargetPort)
-		cfg.Port = cfg.FlowsTargetPort
+		cfg.TargetPort = cfg.FlowsTargetPort
 	} else if cfg.PCAServerPort != 0 {
 		clog.Infof("Using deprecated PCAServerPort %d", cfg.PCAServerPort)
-		cfg.Port = cfg.PCAServerPort
+		cfg.TargetPort = cfg.PCAServerPort
 	}
 }

pkg/agent/packets_agent.go

@@ -135,12 +135,12 @@ func packetsAgent(cfg *Config,
 }
 
 func buildGRPCPacketExporter(cfg *Config) (node.TerminalFunc[[]*flow.PacketRecord], error) {
-	if cfg.Host == "" || cfg.Port == 0 {
+	if cfg.TargetHost == "" || cfg.TargetPort == 0 {
 		return nil, fmt.Errorf("missing target host or port for PCA: %s:%d",
-			cfg.Host, cfg.Port)
+			cfg.TargetHost, cfg.TargetPort)
 	}
 	plog.Info("starting gRPC Packet send")
-	pcapStreamer, err := exporter.StartGRPCPacketSend(cfg.Host, cfg.Port)
+	pcapStreamer, err := exporter.StartGRPCPacketSend(cfg.TargetHost, cfg.TargetPort)
 	if err != nil {
 		return nil, err
 	}

scripts/agent.yml

@@ -34,11 +34,11 @@ spec:
             value: 200ms
           - name: LOG_LEVEL
             value: debug
-          - name: HOST
+          - name: TARGET_HOST
             valueFrom:
               fieldRef:
                 fieldPath: status.hostIP
-          - name: PORT
+          - name: TARGET_PORT
             value: "9999"
           - name: ENABLE_RTT
             value: "true"