[stable/zfs-localpv]: update charts to 1.5.0 (#296)

Signed-off-by: shubham <shubham.bajpai@mayadata.io>

deploy/helm/charts/Chart.yaml

@@ -1,8 +1,8 @@
 apiVersion: v2
 name: zfs-localpv
 description: CSI Driver for dynamic provisioning of ZFS Persistent Local Volumes.
-version: 1.4.0
-appVersion: 1.4.0
+version: 1.5.0
+appVersion: 1.5.0
 icon: https://raw.githubusercontent.com/cncf/artwork/master/projects/openebs/icon/color/openebs-icon-color.png
 home: http://www.openebs.io/
 keywords:

deploy/helm/charts/README.md

@@ -78,7 +78,7 @@ The following table lists the configurable parameters of the OpenEBS ZFS Localpv
 | `zfsPlugin.image.registry`| Registry for openebs-zfs-plugin image| `""`|
 | `zfsPlugin.image.repository`| Image repository for openebs-zfs-plugin| `openebs/zfs-driver`|
 | `zfsPlugin.image.pullPolicy`| Image pull policy for openebs-zfs-plugin| `IfNotPresent`|
-| `zfsPlugin.image.tag`| Image tag for openebs-zfs-plugin| `1.4.0`|
+| `zfsPlugin.image.tag`| Image tag for openebs-zfs-plugin| `1.5.0`|
 | `zfsNode.driverRegistrar.image.registry`| Registry for csi-node-driver-registrar image| `k8s.gcr.io/`|
 | `zfsNode.driverRegistrar.image.repository`| Image repository for csi-node-driver-registrar| `sig-storage/csi-node-driver-registrar`|
 | `zfsNode.driverRegistrar.image.pullPolicy`| Image pull policy for csi-node-driver-registrar| `IfNotPresent`|

deploy/helm/charts/crds/zfsrestore.yaml

@@ -76,6 +76,151 @@ spec:
           - InProgress
           - Invalid
           type: string
+        volSpec:
+          description: VolumeInfo defines ZFS volume parameters for all modes in which
+            ZFS volumes can be created like - ZFS volume with filesystem, ZFS Volume
+            exposed as zfs or ZFS volume exposed as raw block device. Some of the
+            parameters can be only set during creation time (as specified in the details
+            of the parameter), and a few are editable. In case of Cloned volumes,
+            the parameters are assigned the same values as the source volume.
+          properties:
+            capacity:
+              description: Capacity of the volume
+              minLength: 1
+              type: string
+            compression:
+              description: 'Compression specifies the block-level compression algorithm
+                to be applied to the ZFS Volume. The value "on" indicates ZFS to use
+                the default compression algorithm. The default compression algorithm
+                used by ZFS will be either lzjb or, if the lz4_compress feature is
+                enabled, lz4. Compression property can be edited after the volume
+                has been created. The change will only be applied to the newly-written
+                data. For instance, if the Volume was created with "off" and the next
+                day the compression was modified to "on", the data written prior to
+                setting "on" will not be compressed. Default Value: off.'
+              pattern: ^(on|off|lzjb|gzip|gzip-[1-9]|zle|lz4)$
+              type: string
+            dedup:
+              description: 'Deduplication is the process for removing redundant data
+                at the block level, reducing the total amount of data stored. If a
+                file system has the dedup property enabled, duplicate data blocks
+                are removed synchronously. The result is that only unique data is
+                stored and common components are shared among files. Deduplication
+                can consume significant processing power (CPU) and memory as well
+                as generate additional disk IO. Before creating a pool with deduplication
+                enabled, ensure that you have planned your hardware requirements appropriately
+                and implemented appropriate recovery practices, such as regular backups.
+                As an alternative to deduplication consider using compression=lz4,
+                as a less resource-intensive alternative. should be enabled on the
+                zvol. Dedup property can be edited after the volume has been created.
+                Default Value: off.'
+              enum:
+              - "on"
+              - "off"
+              type: string
+            encryption:
+              description: 'Enabling the encryption feature allows for the creation
+                of encrypted filesystems and volumes. ZFS will encrypt file and zvol
+                data, file attributes, ACLs, permission bits, directory listings,
+                FUID mappings, and userused / groupused data. ZFS will not encrypt
+                metadata related to the pool structure, including dataset and snapshot
+                names, dataset hierarchy, properties, file size, file holes, and deduplication
+                tables (though the deduplicated data itself is encrypted). Default
+                Value: off.'
+              pattern: ^(on|off|aes-128-[c,g]cm|aes-192-[c,g]cm|aes-256-[c,g]cm)$
+              type: string
+            fsType:
+              description: 'FsType specifies filesystem type for the zfs volume/dataset.
+                If FsType is provided as "zfs", then the driver will create a ZFS
+                dataset, formatting is not required as underlying filesystem is ZFS
+                anyway. If FsType is ext2, ext3, ext4 or xfs, then the driver will
+                create a ZVOL and format the volume accordingly. FsType can not be
+                modified once volume has been provisioned. Default Value: ext4.'
+              type: string
+            keyformat:
+              description: KeyFormat specifies format of the encryption key The supported
+                KeyFormats are passphrase, raw, hex.
+              enum:
+              - passphrase
+              - raw
+              - hex
+              type: string
+            keylocation:
+              description: KeyLocation is the location of key for the encryption
+              type: string
+            ownerNodeID:
+              description: OwnerNodeID is the Node ID where the ZPOOL is running which
+                is where the volume has been provisioned. OwnerNodeID can not be edited
+                after the volume has been provisioned.
+              minLength: 1
+              type: string
+            poolName:
+              description: poolName specifies the name of the pool where the volume
+                has been created. PoolName can not be edited after the volume has
+                been provisioned.
+              minLength: 1
+              type: string
+            recordsize:
+              description: 'Specifies a suggested block size for files in the file
+                system. The size specified must be a power of two greater than or
+                equal to 512 and less than or equal to 128 Kbytes. RecordSize property
+                can be edited after the volume has been created. Changing the file
+                system''s recordsize affects only files created afterward; existing
+                files are unaffected. Default Value: 128k.'
+              minLength: 1
+              type: string
+            shared:
+              description: Shared specifies whether the volume can be shared among
+                multiple pods. If it is not set to "yes", then the ZFS-LocalPV Driver
+                will not allow the volumes to be mounted by more than one pods.
+              enum:
+              - "yes"
+              - "no"
+              type: string
+            snapname:
+              description: SnapName specifies the name of the snapshot where the volume
+                has been cloned from. Snapname can not be edited after the volume
+                has been provisioned.
+              type: string
+            thinProvision:
+              description: 'ThinProvision describes whether space reservation for
+                the source volume is required or not. The value "yes" indicates that
+                volume should be thin provisioned and "no" means thick provisioning
+                of the volume. If thinProvision is set to "yes" then volume can be
+                provisioned even if the ZPOOL does not have the enough capacity. If
+                thinProvision is set to "no" then volume can be provisioned only if
+                the ZPOOL has enough capacity and capacity required by volume can
+                be reserved. ThinProvision can not be modified once volume has been
+                provisioned. Default Value: no.'
+              enum:
+              - "yes"
+              - "no"
+              type: string
+            volblocksize:
+              description: 'VolBlockSize specifies the block size for the zvol. The
+                volsize can only be set to a multiple of volblocksize, and cannot
+                be zero. VolBlockSize can not be edited after the volume has been
+                provisioned. Default Value: 8k.'
+              minLength: 1
+              type: string
+            volumeType:
+              description: volumeType determines whether the volume is of type "DATASET"
+                or "ZVOL". If fstype provided in the storageclass is "zfs", a volume
+                of type dataset will be created. If "ext4", "ext3", "ext2" or "xfs"
+                is mentioned as fstype in the storageclass, then a volume of type
+                zvol will be created, which will be further formatted as the fstype
+                provided in the storageclass. VolumeType can not be modified once
+                volume has been provisioned.
+              enum:
+              - ZVOL
+              - DATASET
+              type: string
+          required:
+          - capacity
+          - ownerNodeID
+          - poolName
+          - volumeType
+          type: object
       required:
       - spec
       - status

deploy/helm/charts/values.yaml

@@ -2,7 +2,7 @@
 # This is a YAML-formatted file.
 # Declare variables to be passed into your templates.
 release:
-  version: "1.4.0"
+  version: "1.5.0"
 
 imagePullSecrets:
 # - name: "image-pull-secret"
@@ -123,7 +123,7 @@ zfsPlugin:
     repository: openebs/zfs-driver
     pullPolicy: IfNotPresent
     # Overrides the image tag whose default is the chart appVersion.
-    tag: 1.4.0
+    tag: 1.5.0
 
 role: openebs-zfs