Infinix Note 30 30 Pro

Infinix Note 30/30 Pro (X6883B/X678B)

Works as expected.

Steps to install

WARNING: This guide assumes that you are using the A slot instead of the B slot. To move to the A slot, use fastboot set_active a, flash super.img from firmware and reboot, or you can use the B slot by replacing all the "_a" suffix to "_b" suffix.

• Unlock bootloader
• Disable VBMETA

  fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img
  

• Enter fastboot

  adb reboot fastboot
  

  or

  fastboot reboot fastboot
  

• Remove or resize product and system_ext partitions (optional, but highly recommended since they take a large amount of space)

  fastboot delete-logical-partition product_a
  fastboot delete-logical-partition system_ext_a
  

  or resize it by doing the following

  fastboot resize-logical-partition product_a 335872
  fastboot resize-logical-partition system_ext_a 335872
  fastboot format:ext4 product_a
  fastboot format:ext4 system_ext_a
  

• Flash the GSI

  fastboot flash system_a system-ab-gsi.img
  

• Wipe data

  fastboot -w
  

• Reboot the device

Flash using TWRP instead

Disable VBMETA

Using Recovery (TWRP/OrangeFox):

• Flash FLASH_DISABLE_VBMETA.zip in recovery.

Flashing Generic System Image (GSI)

With TWRP terminal:

• Ensure your current system is in slot _a.
• Execute the following commands:

  lptools resize product_a 335872 # Do not change this value
  lptools resize system_a 4617089843 # or 5368709120 (4.3GB or 5GB system)

• Reboot to recovery.
• Flash product_gsi.img to the product partition.
• Install GSI to the system partition.
• Format DATA.
• Reboot the system.

Hardware Support

Component	Comment
Camera	Works
Speaker / Mic	Works
Headphone	Works
USB DAC	Works
USB OTG	Works
GPS	Works
Bluetooth	Works
NFC	Works
WiFi	Works
SIM / Mobile Data / Voice	Works
Tethering	Works
Proximity Sensor	Works
Accelerometer / Gyroscope	Works
VoLTE	Works with "IMS features / Install IMS APK for MediaTek S vendor /
	Force presence of 4G calling / Re-toggle VoLTE in SIM settings"
RCS Message	Works
Fingerprint	Works
Brightness	Works
Auto Brightness	Works
Offline Charging	Works
Fast Charging	Works
Display Refreshing Rate	Supports 60/90/120Hz with "Misc features / Force FPS"
	Enable "Dynamic FPS" for dynamic switching
Double Tap To Wake	Works
Vibration	Works

Tweaks and Fixes

If you happen to use older GSI builds or experienced stuttering, you can try installing the module below:

GSI Module for Infinix Note 30/Pro v2.7

This module will fix stuttering, status bar, brightness for base Note 30, auto brightness, clock position in status bar, and enable OTG.

Use as a Magisk/KSU module.

---

Tested By:

• Deca1708 - Infinix Note 30 - TrebleDroid Android 14
• rama982 - Infinix Note 30 Pro - TrebleDroid Android 14
• ryenyuku - Infinix Note 30 - LineageOS 21