Merge branch 'Introduce-connection-tracking-offload'

Paul Blakey says:

====================
Introduce connection tracking offload

Background
----------

The connection tracking action provides the ability to associate connection state to a packet.
The connection state may be used for stateful packet processing such as stateful firewalls
and NAT operations.

Connection tracking in TC SW
----------------------------

The CT state may be matched only after the CT action is performed.
As such, CT use cases are commonly implemented using multiple chains.
Consider the following TC filters, as an example:
1. tc filter add dev ens1f0_0 ingress prio 1 chain 0 proto ip flower \
    src_mac 24:8a:07:a5:28:01 ct_state -trk \
    action ct \
    pipe action goto chain 2

2. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \
    ct_state +trk+new \
    action ct commit \
    pipe action tunnel_key set \
        src_ip 0.0.0.0 \
        dst_ip 7.7.7.8 \
        id 98 \
        dst_port 4789 \
    action mirred egress redirect dev vxlan0

3. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \
    ct_state +trk+est \
    action tunnel_key set \
        src_ip 0.0.0.0 \
        dst_ip 7.7.7.8 \
        id 98 \
        dst_port 4789 \
    action mirred egress redirect dev vxlan0

Filter multipath-tcp#1 (chain 0) decides, after initial packet classification, to send the packet to the
connection tracking module (ct action).
Once the ct_state is initialized by the CT action the packet processing continues on chain 2.

Chain 2 classifies the packet based on the ct_state.
Filter multipath-tcp#2 matches on the +trk+new CT state while filter multipath-tcp#3 matches on the +trk+est ct_state.

MLX5 Connection tracking HW offload - MLX5 driver patches
------------------------------

The MLX5 hardware model aligns with the software model by realizing a multi-table
architecture. In SW the TC CT action sets the CT state on the skb. Similarly,
HW sets the CT state on a HW register. Driver gets this CT state while offloading
a tuple with a new ct_metadata action that provides it.

Matches on ct_state are translated to HW register matches.

TC filter with CT action broken to two rules, a pre_ct rule, and a post_ct rule.
pre_ct rule:
   Inserted on the corrosponding tc chain table, matches on original tc match, with
   actions: any pre ct actions, set fte_id, set zone, and goto the ct table.
   The fte_id is a register mapping uniquely identifying this filter.
post_ct_rule:
   Inserted in a post_ct table, matches on the fte_id register mapping, with
   actions: counter + any post ct actions (this is usally 'goto chain X')

post_ct table is a table that all the tuples inserted to the ct table goto, so
if there is a tuple hit, packet will continue from ct table to post_ct table,
after being marked with the CT state (mark/label..)

This design ensures that the rule's actions and counters will be executed only after a CT hit.
HW misses will continue processing in SW from the last chain ID that was processed in hardware.

The following illustrates the HW model:

+-------------------+      +--------------------+    +--------------+
+ pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct      +----->
+ original match    +   |  + tuple + zone match + |  + fte_id match +  |
+-------------------+   |  +--------------------+ |  +--------------+  |
                        v                         v                    v
                     set chain miss mapping    set mark             original
                     set fte_id                set label            filter
                     set zone                  set established      actions
                     set tunnel_id             do nat (if needed)
                     do decap

To fill CT table, driver registers a CB for flow offload events, for each new
flow table that is passed to it from offloading ct actions. Once a flow offload
event is triggered on this CB, offload this flow to the hardware CT table.

Established events offload
--------------------------

Currently, act_ct maintains an FT instance per ct zone. Flow table entries
are created, per ct connection, when connections enter an established
state and deleted otherwise. Once an entry is created, the FT assumes
ownership of the entries, and manages their aging. FT is used for software
offload of conntrack. FT entries associate 5-tuples with an action list.

The act_ct changes in this patchset:
Populate the action list with a (new) ct_metadata action, providing the
connection's ct state (zone,mark and label), and mangle actions if NAT
is configured.

Pass the action's flow table instance as ct action entry parameter,
so  when the action is offloaded, the driver may register a callback on
it's block to receive FT flow offload add/del/stats events.

Netilter changes
--------------------------
The netfilter changes export the relevant bits, and add the relevant CBs
to support the above.

Applying this patchset
--------------------------

On top of current net-next ("r8169: simplify getting stats by using netdev_stats_to_stats64"),
pull Saeed's ct-offload branch, from git git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git
and fix the following non trivial conflict in fs_core.c as follows:

Then apply this patchset.

Changelog:
  v2->v3:
    Added the first two patches needed after rebasing on net-next:
     "net/mlx5: E-Switch, Enable reg c1 loopback when possible"
     "net/mlx5e: en_rep: Create uplink rep root table after eswitch offloads table"
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -78,6 +78,16 @@ config MLX5_ESWITCH
 	        Legacy SRIOV mode (L2 mac vlan steering based).
 	        Switchdev mode (eswitch offloads).
 
+config MLX5_TC_CT
+	bool "MLX5 TC connection tracking offload support"
+	depends on MLX5_CORE_EN && NET_SWITCHDEV && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT
+	default y
+	help
+	  Say Y here if you want to support offloading connection tracking rules
+	  via tc ct action.
+
+	  If unsure, set to Y
+
 config MLX5_CORE_EN_DCB
 	bool "Data Center Bridging (DCB) Support"
 	default y

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -37,6 +37,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH)     += en_rep.o en_tc.o en/tc_tun.o lib/port_tu
 					lib/geneve.o en/mapping.o en/tc_tun_vxlan.o en/tc_tun_gre.o \
 					en/tc_tun_geneve.o diag/en_tc_tracepoint.o
 mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += en/hv_vhca_stats.o
+mlx5_core-$(CONFIG_MLX5_TC_CT)	     += en/tc_ct.o
 
 #
 # Core extra