qmk · tzarc · Jun 24, 2023 · Jun 18, 2023 · Jun 18, 2023 · Jun 18, 2023
diff --git a/keyboards/0xcb/1337/config.h b/keyboards/0xcb/1337/config.h
@@ -20,9 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define TAP_CODE_DELAY 10
 
-  #define RGBLIGHT_HUE_STEP 8
-  #define RGBLIGHT_SAT_STEP 8
-  #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/0xcb/1337/info.json b/keyboards/0xcb/1337/info.json
@@ -22,6 +22,8 @@
     "led": "B0"
   },
   "rgblight": {
+    "saturation_steps": 8,
+    "brightness_steps": 8,
     "led_count": 4,
     "sleep": true
   },

diff --git a/keyboards/0xcb/tutelpad/config.h b/keyboards/0xcb/tutelpad/config.h
@@ -16,10 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define RGBLIGHT_HUE_STEP 10            // The number of steps to cycle through the hue by
-#define RGBLIGHT_SAT_STEP 17            // The number of steps to increment the saturation by
-#define RGBLIGHT_VAL_STEP 17            // The number of steps to increment the brightness by
-
 #define RGBLIGHT_EFFECT_BREATHING       // Enable all additional RGB animation modes
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/0xcb/tutelpad/info.json b/keyboards/0xcb/tutelpad/info.json
@@ -12,6 +12,7 @@
         "matrix": [1, 0]
     },
     "rgblight": {
+        "hue_steps": 10,
         "led_count": 4,
         "sleep": true
     },

diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h
@@ -27,9 +27,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/1upkeyboards/1up60hse/info.json b/keyboards/1upkeyboards/1up60hse/info.json
@@ -19,6 +19,8 @@
         "breathing": true
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 14,
         "sleep": true
     },

diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h
@@ -34,6 +34,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/1upkeyboards/1up60hte/info.json b/keyboards/1upkeyboards/1up60hte/info.json
@@ -21,6 +21,8 @@
         "on_state": 0
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 14
     },
     "ws2812": {

diff --git a/keyboards/1upkeyboards/1up60rgb/config.h b/keyboards/1upkeyboards/1up60rgb/config.h
@@ -16,6 +16,3 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/1upkeyboards/1up60rgb/info.json b/keyboards/1upkeyboards/1up60rgb/info.json
@@ -18,6 +18,8 @@
     "levels": 5
   },
   "rgblight": {
+    "saturation_steps": 8,
+    "brightness_steps": 8,
     "led_count": 16
   },
   "ws2812": {

diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h
@@ -19,9 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #    define RGB_MATRIX_LED_COUNT 16
 #    ifdef RGBLIGHT_ENABLE
-#        define RGBLIGHT_HUE_STEP 8
-#        define RGBLIGHT_SAT_STEP 8
-#        define RGBLIGHT_VAL_STEP 8
 #        define RGBLIGHT_EFFECT_BREATHING
 #        define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #        define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/1upkeyboards/super16/info.json b/keyboards/1upkeyboards/super16/info.json
@@ -12,6 +12,8 @@
     "pin": "D3"
   },
   "rgblight": {
+    "saturation_steps": 8,
+    "brightness_steps": 8,
     "led_count": 16,
     "sleep": true
   },

diff --git a/keyboards/1upkeyboards/sweet16/v1/config.h b/keyboards/1upkeyboards/sweet16/v1/config.h
@@ -17,6 +17,3 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/1upkeyboards/sweet16/v1/info.json b/keyboards/1upkeyboards/sweet16/v1/info.json
@@ -4,6 +4,8 @@
         "device_version": "0.0.1"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 1
     },
     "ws2812": {

diff --git a/keyboards/25keys/aleth42/rev0/config.h b/keyboards/25keys/aleth42/rev0/config.h
@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-   #define RGBLIGHT_HUE_STEP 8
-   #define RGBLIGHT_SAT_STEP 8
-   #define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/aleth42/rev0/info.json b/keyboards/25keys/aleth42/rev0/info.json
@@ -14,6 +14,8 @@
         ]
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 6,
         "sleep": true
     },

diff --git a/keyboards/25keys/aleth42/rev1/config.h b/keyboards/25keys/aleth42/rev1/config.h
@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-   #define RGBLIGHT_HUE_STEP 8
-   #define RGBLIGHT_SAT_STEP 8
-   #define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/aleth42/rev1/info.json b/keyboards/25keys/aleth42/rev1/info.json
@@ -14,6 +14,8 @@
         ]
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 8,
         "sleep": true
     },

diff --git a/keyboards/25keys/cassette42/config.h b/keyboards/25keys/cassette42/config.h
@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#    define RGBLIGHT_HUE_STEP 8
-#    define RGBLIGHT_SAT_STEP 8
-#    define RGBLIGHT_VAL_STEP 8
 #    define RGBLIGHT_EFFECT_BREATHING
 #    define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #    define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/25keys/cassette42/info.json b/keyboards/25keys/cassette42/info.json
@@ -15,6 +15,8 @@
         ]
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 5,
         "sleep": true
     },

diff --git a/keyboards/25keys/zinc/rev1/info.json b/keyboards/25keys/zinc/rev1/info.json
@@ -8,6 +8,9 @@
   "split": {
     "soft_serial_pin": "D2"
   },
+  "rgblight": {
+    "hue_steps": 10
+  },
   "ws2812": {
     "pin": "D3"
   },

diff --git a/keyboards/25keys/zinc/rev1/post_config.h b/keyboards/25keys/zinc/rev1/post_config.h
@@ -71,8 +71,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #endif
   #define RGBLIGHT_VAL_STEP 4
 #endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
 
 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
 // USB_MAX_POWER_CONSUMPTION value

diff --git a/keyboards/25keys/zinc/reva/info.json b/keyboards/25keys/zinc/reva/info.json
@@ -8,6 +8,9 @@
   "split": {
     "soft_serial_pin": "D2"
   },
+  "rgblight": {
+    "hue_steps": 10
+  },
   "ws2812": {
     "pin": "D3"
   },

diff --git a/keyboards/25keys/zinc/reva/post_config.h b/keyboards/25keys/zinc/reva/post_config.h
@@ -71,8 +71,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #endif
   #define RGBLIGHT_VAL_STEP 4
 #endif
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
 
 #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
 // USB_MAX_POWER_CONSUMPTION value

diff --git a/keyboards/40percentclub/luddite/config.h b/keyboards/40percentclub/luddite/config.h
@@ -17,6 +17,3 @@
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
 #    define RGBLIGHT_EFFECT_TWINKLE
-// #define RGBLIGHT_HUE_STEP 10
-// #define RGBLIGHT_SAT_STEP 17
-// #define RGBLIGHT_VAL_STEP 17
diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h
@@ -27,9 +27,6 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/40percentclub/nori/info.json b/keyboards/40percentclub/nori/info.json
@@ -17,6 +17,8 @@
       "pin": "B5"
     },
     "rgblight": {
+      "saturation_steps": 8,
+      "brightness_steps": 8,
       "led_count": 10
     },
     "ws2812": {

diff --git a/keyboards/40percentclub/tomato/config.h b/keyboards/40percentclub/tomato/config.h
@@ -17,6 +17,3 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/40percentclub/tomato/info.json b/keyboards/40percentclub/tomato/info.json
@@ -9,6 +9,8 @@
     "device_version": "0.0.1"
   },
   "rgblight": {
+    "saturation_steps": 8,
+    "brightness_steps": 8,
     "led_count": 30
   },
   "ws2812": {

diff --git a/keyboards/4pplet/aekiso60/rev_a/config.h b/keyboards/4pplet/aekiso60/rev_a/config.h
@@ -1,8 +1,5 @@
 #pragma once
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/aekiso60/rev_a/info.json b/keyboards/4pplet/aekiso60/rev_a/info.json
@@ -5,6 +5,8 @@
         "device_version": "0.0.1"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 12
     },
     "ws2812": {

diff --git a/keyboards/4pplet/aekiso60/rev_b/config.h b/keyboards/4pplet/aekiso60/rev_b/config.h
@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define WS2812_EXTERNAL_PULLUP
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/aekiso60/rev_b/info.json b/keyboards/4pplet/aekiso60/rev_b/info.json
@@ -5,6 +5,8 @@
         "device_version": "0.0.2"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 12
     },
     "ws2812": {

diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/config.h b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h
@@ -25,9 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_SPI_MOSI_PAL_MODE 0
 #define WS2812_SPI_SCK_PIN A5
 #define WS2812_SPI_SCK_PAL_MODE 0
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/info.json b/keyboards/4pplet/eagle_viper_rep/rev_a/info.json
@@ -19,6 +19,8 @@
         "breathing": true
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 16
     },
     "ws2812": {

diff --git a/keyboards/4pplet/eagle_viper_rep/rev_b/config.h b/keyboards/4pplet/eagle_viper_rep/rev_b/config.h
@@ -23,9 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Underglow */
 #define WS2812_EXTERNAL_PULLUP
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/eagle_viper_rep/rev_b/info.json b/keyboards/4pplet/eagle_viper_rep/rev_b/info.json
@@ -24,6 +24,8 @@
         "scroll_lock": "B13"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 16
     },
     "ws2812": {

diff --git a/keyboards/4pplet/waffling60/rev_b/config.h b/keyboards/4pplet/waffling60/rev_b/config.h
@@ -16,9 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/waffling60/rev_b/info.json b/keyboards/4pplet/waffling60/rev_b/info.json
@@ -9,6 +9,8 @@
         "device_version": "0.0.2"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 1
     },
     "ws2812": {

diff --git a/keyboards/4pplet/waffling60/rev_c/config.h b/keyboards/4pplet/waffling60/rev_c/config.h
@@ -16,9 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 #define RGBLIGHT_EFFECT_RAINBOW_SWIRL

diff --git a/keyboards/4pplet/waffling60/rev_c/info.json b/keyboards/4pplet/waffling60/rev_c/info.json
@@ -13,6 +13,8 @@
         "rows": ["C2", "D0", "B0", "D6", "D5"]
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 1
     },
     "ws2812": {

diff --git a/keyboards/4pplet/waffling60/rev_d/config.h b/keyboards/4pplet/waffling60/rev_d/config.h
@@ -17,7 +17,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 #define WS2812_EXTERNAL_PULLUP
-
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/4pplet/waffling60/rev_d/info.json b/keyboards/4pplet/waffling60/rev_d/info.json
@@ -9,6 +9,8 @@
         "device_version": "0.0.4"
     },
     "rgblight": {
+        "saturation_steps": 8,
+        "brightness_steps": 8,
         "led_count": 1
     },
     "ws2812": {