add Hannah910 V2 PCB and VIA support

keyboards/mechlovin/hannah910/config.h

@@ -20,12 +20,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Mechlovin
-#define PRODUCT Hannah910
-#define DESCRIPTION A replace PCB for TGR910 keyboard
+#define VENDOR_ID       0x4D4C // ML-MechLovin'
+#define MANUFACTURER    Mechlovin
+#define PRODUCT         Mechlovin Hannah910
+#define DESCRIPTION     Mechlovin Hannah910
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -54,32 +52,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 3
 
 #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-#define RGBLED_NUM 9
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
+#define RGBLIGHT_LIMIT_VAL 255
 #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/mechlovin/hannah910/hannah910.h

@@ -17,54 +17,8 @@
 
 #include "quantum.h"
 
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT_all( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \
-    k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \
-    k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \
-    k61, k62, k63,      k64,      k65,      k66,      k67, k68, k69, k70, k71  \
-) \
-{ \
-    { k00, k01, k02, k03,   k04, k05,   k06, k07,   k08, k09,   k10, k11, k12, k13, k14 }, \
-    { k15, k16, k17, k18,   k19, k20,   k21, k22,   k23, k24,   k25, k26, k27, k28, k29 }, \
-    { k30, k31, k32, k33,   k34, k35,   k36, k37,   k38, k39,   k40, k41, k42, k43, k45 }, \
-    { k46, k47, k48, k49,   k50, k51,   k52, k53,   k54, k55,   k56, k57, k58, k59, k60 }, \
-    { k61, k62, k63, KC_NO, k64, KC_NO, k65, KC_NO, k66, KC_NO, k67, k68, k69, k70, k71 }, \
-}
-#define LAYOUT_iso( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, \
-    k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27,      k29, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k45, \
-    k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \
-    k61, k62, k63,                k65,                k67, k68, k69, k70, k71  \
-) \
-{ \
-    { k00, k01, k02, k03,   k04,   k05,   k06,   k07,   k08, k09,   k10, k11, k12, k13,   k14 }, \
-    { k15, k16, k17, k18,   k19,   k20,   k21,   k22,   k23, k24,   k25, k26, k27, KC_NO, k29 }, \
-    { k30, k31, k32, k33,   k34,   k35,   k36,   k37,   k38, k39,   k40, k41, k42, k43,   k45 }, \
-    { k46, k47, k48, k49,   k50,   k51,   k52,   k53,   k54, k55,   k56, k57, k58, k59,   k60 }, \
-    { k61, k62, k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69, k70,   k71 }, \
-}
-
-#define LAYOUT_ansi( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13,      \
-    k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
-    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41,      k43, k45, \
-    k46,      k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \
-    k61, k62, k63,                k65,                k67, k68, k69, k70, k71  \
-) \
-{ \
-    { k00, k01,   k02, k03,   k04,   k05,   k06, k07,   k08,   k09,   k10, k11, k12,   k13, KC_NO }, \
-    { k15, k16,   k17, k18,   k19,   k20,   k21, k22,   k23,   k24,   k25, k26, k27,   k28, k29   }, \
-    { k30, k31,   k32, k33,   k34,   k35,   k36, k37,   k38,   k39,   k40, k41, KC_NO, k43, k45   }, \
-    { k46, KC_NO, k48, k49,   k50,   k51,   k52, k53,   k54,   k55,   k56, k57, k58,   k59, k60   }, \
-    { k61, k62,   k63, KC_NO, KC_NO, KC_NO, k65, KC_NO, KC_NO, KC_NO, k67, k68, k69,   k70, k71 }, \
-}
+#ifdef KEYBOARD_mechlovin_hannah910_rev1
+    #include "rev1.h"
+#elif KEYBOARD_mechlovin_hannah910_rev2
+    #include "rev2.h"
+#endif

keyboards/mechlovin/hannah910/readme.md

@@ -4,12 +4,18 @@
 
 Replacement PCB and plate for TGR 910 keyboard 
 
-Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin)  
-Hardware Supported: TGR910 CE, TGR910 SE  
-Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/)
+* Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin)
+* Hardware Supported: TGR910 CE, TGR910 SE 
+* Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make mechlovin/hannah910:default
+    make mechlovin/hannah910/rev1:default
+    make mechlovin/hannah910/rev2:default
+
+Make firmware for keymap with VIA:
+
+    make mechlovin/hannah910/rev1:via
+    make mechlovin/hannah910/rev2:via
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mechlovin/hannah910/rev1/config.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#define PRODUCT_ID 0x9101 
+#define DEVICE_VER 0x0001
+
+#define RGBLED_NUM 9

keyboards/mechlovin/hannah910/keymaps/ansi/keymap.c → keyboards/mechlovin/hannah910/rev1/keymaps/ansi/keymap.c

@@ -23,7 +23,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
         KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
     ),
-    [1] = LAYOUT_ansi( /* Base */
+    [1] = LAYOUT_ansi( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT_ansi( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT_ansi( /* Layer2 */
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,

keyboards/mechlovin/hannah910/rev1/keymaps/ansi/readme.md

@@ -0,0 +1 @@
+# The ansi keymap for hannah910v1

keyboards/mechlovin/hannah910/keymaps/default/keymap.c → keyboards/mechlovin/hannah910/rev1/keymaps/default/keymap.c

@@ -15,15 +15,30 @@
  */
 #include QMK_KEYBOARD_H
 
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT_all( /* Base */
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,   KC_9,     KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,   KC_O,     KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_INS,
-        LT(1,KC_CAPS),     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,   KC_L,     KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT,  KC_HOME,
-        KC_LSFT, KC_NUHS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        LT(1,KC_CAPS),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,   KC_L,     KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  KC_HOME,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
         KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
     ),
-    [1] = LAYOUT_all( /* Base */
+    [1] = LAYOUT_all( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT_all( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT_all( /* Layer2 */
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/mechlovin/hannah910/rev1/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for hannah910v1

keyboards/mechlovin/hannah910/rev1/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 Mechlovin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all( /* Base */
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,   KC_9,     KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,   KC_O,     KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_INS,
+        LT(1,KC_CAPS),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,   KC_L,     KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  KC_HOME,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,           KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT_all( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT_all( /* Layer2 */
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+};

keyboards/mechlovin/hannah910/rev1/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The default keymap (VIA support) for hannah910v1

keyboards/mechlovin/hannah910/rev1/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/mechlovin/hannah910/rev1/readme.md

@@ -0,0 +1,15 @@
+# hannah910
+
+![hannah910](https://i.imgur.com/n8WN5Z7.jpg)
+
+Replacement PCB and plate for TGR 910 keyboard 
+
+* Keyboard Maintainer: [Mechlovin'](https://github.com/mechlovin)
+* Hardware Supported: TGR910 CE, TGR910 SE
+* Hardware Availability: [Reddit Group Buy](https://www.reddit.com/r/mechmarket/comments/dhwvbn/gb_1015_update_hannah_910_group_buy_tgr_910/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechlovin/hannah910/rev1:default 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).