-
Notifications
You must be signed in to change notification settings - Fork 2
GRID OPERATORS
Controls are referenced by ids. Buttons can use ids from 0 to 255, faders can use ids from 0 to 63. Controls can overlap, and presses are processed by all the controls that include that grid button. G.LED and G.REC will be applied on top of everything else.
Defining a control enables it. Disabling a control will hide it. Disabling a group disables all controls within that group. G.LED and G.REC cannot be disabled, instead they have to be cleared.
x and y specify the top left corner, x is the horizontal coordinate between 0 (left) and 15 (right),y is the vertical coordinate between 0 (top) and 15 (bottom). w and h are width and height. level is the brightness level between 0 (completely dark) and 15 (the brightest). There are two special brightness levels: -1 (dim) and -2 (brighten). Level -3 clears (makes it transparent again).
A control can only belong to one group at a time. Operators that don't take groups as a parameter will use the currently selected group which is set with G.GRP. There are 64 groups available (ids: 0 to 63).
For script parameter possible values can be 1-10, where 9 is Metro and 10 is Init. Same script can be shared by multiple controls, in which case take advantage of the ops that give you the value or the id of the last control pressed.
Also see STARTING SIMPLE
G.RST
full reset (reset all controls to defaults, clear all LEDs, reset dim level)
G.CLR
clear all LEDs
G.DIM level
set dim level 0..14 (higher values dim more). to remove set to 0
G.ROTATE 1/0
rotate grid 180 degrees
G.KEY x y action
emulate grid key press (set action to 1 for press, 0 for release)
there are also button and fader specific group ops - see BUTTONS/FADERS sections below
G.GRP G.GRP id
get or set the current group
G.GRP.EN id G.GRP.EN id 1/0
check if a group is enabled or enable/disable a group
G.GRP.RST id
reset all controls within a group to defaults
G.GRP.SW id
switch a group (enable specified group, disable all others)
G.GRP.SC id G.GRP.SC id script
get assigned script or assign a script to a group
G.GRPI
get id of the last group that received input
to dim set level to -1
to brighten set level to -2
to clear set level to -3
G.LED x y G.LED x y level
get LED level or set LED to level
G.LED.C x y
clear LED (same as using G.LED with level -3)
G.REC x y w h fill border
draw a rectangle (use width or height of 1 for lines)
G.RCT x1 y1 x2 y2 fill border
draw a rectangle using start/end coordinates
G.BTN id x y w h latch level script
initialize a button in the current group and assign a script (0 for no script)
set latch to 0 for momentary, any other value for latching
G.GBT group id x y w h latch level script
same as above but with group specified
G.BTX id x y w h latch level script columns rows
create a block of buttons with the specified number of columns and rows
ids are incremented sequentially
G.GBX group id x y w h latch level script columns rows
same as above but with group specified
G.BTN.EN id G.BTN.EN id 1/0
check if a button is enabled or enable/disable a button
G.BTN.X id G.BTN.X id x
get or set x coordinate
G.BTN.Y id G.BTN.Y id y
get or set y coordinate
G.BTN.V id G.BTN.V id value
get or set value. 1 means the button is pressed, 0 not pressed
G.BTN.L id G.BTN.L id level
get or set brightness level
G.BTNI
get id of the last pressed
G.BTNX G.BTNX x
get or set x coordinate of the last pressed
G.BTNY G.BTNY y
get or set y coordinate of the last pressed
G.BTNV G.BTNV value
get or set value of the last pressed
G.BTNL G.BTNL level
get or set brightness level of the last pressed
G.BTN.SW id
set value for specified button to 1, set it to 0 for all others within the same group
G.BTN.PR id action
emulate button press. set action to 1 for press, 0 for release
(action is ignored for latching buttons)
G.GBTN.V group value
set value for all buttons in a group
G.GBTN.L group odd_level even_level
set brightness level for all buttons in a group
G.GBTN.C group
get the count of all currently pressed buttons in a group
G.GBTN.I group index
get the id of a currently pressed button by index (index is 0-based)
G.GBTN.W group
get the width of a block represented by currently pressed buttons in a group
G.GBTN.H group
get the height of a block represented by currently pressed buttons in a group
G.GBTN.X1 group
get x coordinate for the leftmost pressed button in a group
G.GBTN.X2 group
get x coordinate for the rightmost pressed button in a group
G.GBTN.Y1 group
get y coordinate for the highest pressed button in a group
G.GBTN.Y2 group
get y coordinate for the lowest pressed button in a group
G.FDR id x y w h type level script
initialize fader in the current group and assign a script (0 for no script)
type selects fader type:
0 - coarse, horizontal bar
1 - coarse, vertical bar
2 - coarse, horizontal dot
3 - coarse, vertical dot
4 - fine, horizontal bar
5 - fine, vertical bar
6 - fine, horizontal dot
7 - fine, vertical dot
level is brightness level for coarse faders, max value level for fine faders
G.GFD group id x y w h type level script
same as above but with group specified
G.FDX id x y w h type level script columns rows
create a block of faders with the specified number of columns and rows
ids are incremented sequentially
G.GFX group id x y w h type level script columns rows
same as above but with group specified
G.FDR.EN id G.FDR.EN id 1/0
check if a fader is enabled or enable/disable a fader
G.FDR.X id G.FDR.X id x
get/set x coordinate
G.FDR.Y id G.FDR.Y id y
get/set y coordinate
G.FDR.V id G.FDR.V id value
get/set value scaled to fader min max (set range with G.GFDR.RN)
G.FDR.N id G.FDR.N id value
get/set value in grid units
G.FDR.L id G.FDR.L id level
get or set level (brightness level for coarse faders, max value level for fine faders)
G.FDRI
get id of the last pressed
G.FDRX G.FDRX x
get or set x coordinate of the last pressed
G.FDRY G.FDRY y
get or set y coordinate of the last pressed
G.FDRV G.FDRV value
get or set value of the last pressed scaled to fader min max
G.FDRN G.FDRN value
get or set value of the last pressed
G.FDRL G.FDRL level
get or set level of the last pressed
G.FDR.PR id value
emulate fader press
G.GFDR.V group value
set value for all faders in group
G.GFDR.N group value
set value for all faders in group
G.GFDR.L group odd_level even_level
set level for all faders in group
G.GFDR.RN group min max
set range for fader values (by default 0..16383)
applies to all faders within that group
G.XYP
G.GXYP
G.XYPX
G.XYP.EN
G.XYP.LAT
G.XYP.L
G.XYP.X id index
G.XYP.Y id index
G.XYPI
G.XYPN
G.XYPX
G.XYPY
G.XYPL
G.GOL
G.GGOL
G.GOLX
G.GOL.EN
G.GOL.L
G.GOL.V
G.GOL.DENS
G.GOL.CLK
G.GOL.RND
G.GOL.NEW
G.GOL.RULES
G.GOL.SHF