refactor: using definite patterns to simplify keybindings

yazi-config/preset/keymap.toml

@@ -31,8 +31,8 @@ keymap = [
 	{ on = [ "<PageUp>" ],     exec = "arrow -100%", desc = "Move cursor up one page" },
 	{ on = [ "<PageDown>" ],   exec = "arrow 100%",  desc = "Move cursor down one page" },
 
-	{ on = [ "h" ], exec = [ "escape --visual", "leave" ], desc = "Go back to the parent directory" },
-	{ on = [ "l" ], exec = [ "escape --visual", "enter" ], desc = "Enter the child directory" },
+	{ on = [ "h" ], exec = "leave", desc = "Go back to the parent directory" },
+	{ on = [ "l" ], exec = "enter", desc = "Enter the child directory" },
 
 	{ on = [ "H" ], exec = "back",    desc = "Go back to the previous directory" },
 	{ on = [ "L" ], exec = "forward", desc = "Go forward to the next directory" },
@@ -58,29 +58,29 @@ keymap = [
 	{ on = [ "<C-r>" ],   exec = "select_all --state=none",            desc = "Inverse selection of all files" },
 
 	# Operation
-	{ on = [ "o" ],         exec = [ "escape --visual", "open" ],                       desc = "Open the selected files" },
-	{ on = [ "O" ],         exec = [ "escape --visual", "open --interactive" ],         desc = "Open the selected files interactively" },
-	{ on = [ "<Enter>" ],   exec = [ "escape --visual", "open" ],                       desc = "Open the selected files" },
-	{ on = [ "<C-Enter>" ], exec = [ "escape --visual", "open --interactive" ],         desc = "Open the selected files interactively" },
-	{ on = [ "y" ],         exec = [ "escape --visual", "yank" ],                       desc = "Copy the selected files" },
-	{ on = [ "Y" ],         exec = "unyank",                                            desc = "Cancel the yank status of files" },
-	{ on = [ "x" ],         exec = [ "escape --visual", "yank --cut" ],                 desc = "Cut the selected files" },
-	{ on = [ "p" ],         exec = "paste",                                             desc = "Paste the files" },
-	{ on = [ "P" ],         exec = "paste --force",                                     desc = "Paste the files (overwrite if the destination exists)" },
-	{ on = [ "-" ],         exec = "link",                                              desc = "Symlink the absolute path of files" },
-	{ on = [ "_" ],         exec = "link --relative",                                   desc = "Symlink the relative path of files" },
-	{ on = [ "d" ],         exec = [ "escape --visual", "remove" ],                     desc = "Move the files to the trash" },
-	{ on = [ "D" ],         exec = [ "escape --visual", "remove --permanently" ],       desc = "Permanently delete the files" },
-	{ on = [ "a" ],         exec = "create",                                            desc = "Create a file or directory (ends with / for directories)" },
-	{ on = [ "r" ],         exec = [ "escape --visual", "rename --cursor=before_ext" ], desc = "Rename a file or directory" },
-	{ on = [ ";" ],         exec = [ "escape --visual", "shell" ],                      desc = "Run a shell command" },
-	{ on = [ ":" ],         exec = [ "escape --visual", "shell --block" ],              desc = "Run a shell command (block the UI until the command finishes)" },
-	{ on = [ "." ],         exec = "hidden toggle",                                     desc = "Toggle the visibility of hidden files" },
-	{ on = [ "s" ],         exec = "search fd",                                         desc = "Search files by name using fd" },
-	{ on = [ "S" ],         exec = "search rg",                                         desc = "Search files by content using ripgrep" },
-	{ on = [ "<C-s>" ],     exec = "search none",                                       desc = "Cancel the ongoing search" },
-	{ on = [ "z" ],         exec = "jump zoxide",                                       desc = "Jump to a directory using zoxide" },
-	{ on = [ "Z" ],         exec = "jump fzf",                                          desc = "Jump to a directory, or reveal a file using fzf" },
+	{ on = [ "o" ],         exec = "open",                       desc = "Open the selected files" },
+	{ on = [ "O" ],         exec = "open --interactive",         desc = "Open the selected files interactively" },
+	{ on = [ "<Enter>" ],   exec = "open",                       desc = "Open the selected files" },
+	{ on = [ "<C-Enter>" ], exec = "open --interactive",         desc = "Open the selected files interactively" },
+	{ on = [ "y" ],         exec = "yank",                       desc = "Copy the selected files" },
+	{ on = [ "Y" ],         exec = "unyank",                     desc = "Cancel the yank status of files" },
+	{ on = [ "x" ],         exec = "yank --cut",                 desc = "Cut the selected files" },
+	{ on = [ "p" ],         exec = "paste",                      desc = "Paste the files" },
+	{ on = [ "P" ],         exec = "paste --force",              desc = "Paste the files (overwrite if the destination exists)" },
+	{ on = [ "-" ],         exec = "link",                       desc = "Symlink the absolute path of files" },
+	{ on = [ "_" ],         exec = "link --relative",            desc = "Symlink the relative path of files" },
+	{ on = [ "d" ],         exec = "remove",                     desc = "Move the files to the trash" },
+	{ on = [ "D" ],         exec = "remove --permanently",       desc = "Permanently delete the files" },
+	{ on = [ "a" ],         exec = "create",                     desc = "Create a file or directory (ends with / for directories)" },
+	{ on = [ "r" ],         exec = "rename --cursor=before_ext", desc = "Rename a file or directory" },
+	{ on = [ ";" ],         exec = "shell",                      desc = "Run a shell command" },
+	{ on = [ ":" ],         exec = "shell --block",              desc = "Run a shell command (block the UI until the command finishes)" },
+	{ on = [ "." ],         exec = "hidden toggle",              desc = "Toggle the visibility of hidden files" },
+	{ on = [ "s" ],         exec = "search fd",                  desc = "Search files by name using fd" },
+	{ on = [ "S" ],         exec = "search rg",                  desc = "Search files by content using ripgrep" },
+	{ on = [ "<C-s>" ],     exec = "search none",                desc = "Cancel the ongoing search" },
+	{ on = [ "z" ],         exec = "jump zoxide",                desc = "Jump to a directory using zoxide" },
+	{ on = [ "Z" ],         exec = "jump fzf",                   desc = "Jump to a directory, or reveal a file using fzf" },
 
 	# Linemode
 	{ on = [ "m", "s" ], exec = "linemode size",        desc = "Set linemode to size" },
@@ -89,10 +89,10 @@ keymap = [
 	{ on = [ "m", "n" ], exec = "linemode none",        desc = "Set linemode to none" },
 
 	# Copy
-	{ on = [ "c", "c" ], exec = [ "escape --visual", "copy path" ],             desc = "Copy the absolute path" },
-	{ on = [ "c", "d" ], exec = [ "escape --visual", "copy dirname" ],          desc = "Copy the path of the parent directory" },
-	{ on = [ "c", "f" ], exec = [ "escape --visual", "copy filename" ],         desc = "Copy the name of the file" },
-	{ on = [ "c", "n" ], exec = [ "escape --visual", "copy name_without_ext" ], desc = "Copy the name of the file without the extension" },
+	{ on = [ "c", "c" ], exec = "copy path",             desc = "Copy the absolute path" },
+	{ on = [ "c", "d" ], exec = "copy dirname",          desc = "Copy the path of the parent directory" },
+	{ on = [ "c", "f" ], exec = "copy filename",         desc = "Copy the name of the file" },
+	{ on = [ "c", "n" ], exec = "copy name_without_ext", desc = "Copy the name of the file without the extension" },
 
 	# Filter
 	{ on = [ "f" ], exec = "filter --smart", desc = "Filter the files" },

yazi-config/src/theme/theme.rs

@@ -31,10 +31,10 @@ pub struct Manager {
 	#[validate(range(min = 1, message = "Must be greater than 0"))]
 	tab_width:    u8,
 
-	// Selected counter
-	count_selected: Style,
+	// Count
 	count_copied:   Style,
 	count_cut:      Style,
+	count_selected: Style,
 
 	// Border
 	pub border_symbol: String,

yazi-core/src/help/help.rs

@@ -1,7 +1,7 @@
 use crossterm::event::KeyCode;
 use unicode_width::UnicodeWidthStr;
 use yazi_config::{keymap::{Control, Key}, KEYMAP};
-use yazi_shared::{render, term::Term, Layer};
+use yazi_shared::{render, render_and, term::Term, Layer};
 
 use super::HELP_MARGIN;
 use crate::input::Input;
@@ -49,8 +49,7 @@ impl Help {
 			}
 			Key { code: KeyCode::Enter, shift: false, ctrl: false, alt: false } => {
 				self.in_filter = None;
-				render!();
-				return true; // Don't do the `filter_apply` below, since we already have the filtered results.
+				return render_and!(true); // Don't do the `filter_apply` below, since we already have the filtered results.
 			}
 			Key { code: KeyCode::Backspace, shift: false, ctrl: false, alt: false } => {
 				input.backspace(false);

yazi-core/src/manager/commands/open.rs

@@ -25,8 +25,11 @@ impl From<Cmd> for Opt {
 
 impl Manager {
 	pub fn open(&mut self, opt: impl Into<Opt>, tasks: &Tasks) {
-		let mut opt = opt.into() as Opt;
+		if !self.active_mut().try_escape_visual() {
+			return;
+		}
 
+		let mut opt = opt.into() as Opt;
 		let selected = if opt.hovered {
 			self.hovered().map(|h| vec![&h.url]).unwrap_or_default()
 		} else {

yazi-core/src/manager/commands/paste.rs

@@ -18,10 +18,11 @@ impl Manager {
 		let opt = opt.into() as Opt;
 
 		let dest = self.cwd();
-		if self.yanked.cut {
-			tasks.file_cut(&self.yanked, dest, opt.force);
-		} else {
+		if !self.yanked.cut {
 			tasks.file_copy(&self.yanked, dest, opt.force, opt.follow);
 		}
+
+		tasks.file_cut(&self.yanked, dest, opt.force);
+		self.unyank(());
 	}
 }

yazi-core/src/manager/commands/remove.rs

@@ -18,6 +18,10 @@ impl From<Cmd> for Opt {
 
 impl Manager {
 	pub fn remove(&mut self, opt: impl Into<Opt>, tasks: &Tasks) {
+		if !self.active_mut().try_escape_visual() {
+			return;
+		}
+
 		let opt = opt.into() as Opt;
 		let targets = self.selected_or_hovered().into_iter().cloned().collect();
 		tasks.file_remove(targets, opt.force, opt.permanently);

yazi-core/src/manager/commands/rename.rs

@@ -52,8 +52,10 @@ impl Manager {
 		Ok(Self::_hover(Some(new)))
 	}
 
-	pub fn rename(&self, opt: impl Into<Opt>) {
-		if !self.active().selected.is_empty() {
+	pub fn rename(&mut self, opt: impl Into<Opt>) {
+		if !self.active_mut().try_escape_visual() {
+			return;
+		} else if !self.active().selected.is_empty() {
 			return self.bulk_rename();
 		}
 

yazi-core/src/manager/commands/unyank.rs

@@ -2,8 +2,17 @@ use yazi_shared::{event::Cmd, render};
 
 use crate::manager::Manager;
 
+pub struct Opt;
+
+impl From<Cmd> for Opt {
+	fn from(_: Cmd) -> Self { Self }
+}
+impl From<()> for Opt {
+	fn from(_: ()) -> Self { Self }
+}
+
 impl Manager {
-	pub fn unyank(&mut self, _: Cmd) {
+	pub fn unyank(&mut self, _: impl Into<Opt>) {
 		render!(!self.yanked.is_empty());
 
 		self.yanked = Default::default();

yazi-core/src/manager/commands/yank.rs

@@ -14,6 +14,10 @@ impl From<Cmd> for Opt {
 
 impl Manager {
 	pub fn yank(&mut self, opt: impl Into<Opt>) {
+		if !self.active_mut().try_escape_visual() {
+			return;
+		}
+
 		let selected: HashSet<_> = self.selected_or_hovered().into_iter().cloned().collect();
 		if selected.is_empty() {
 			return;

yazi-core/src/tab/commands/back.rs

@@ -0,0 +1,7 @@
+use yazi_shared::event::Cmd;
+
+use crate::tab::Tab;
+
+impl Tab {
+	pub fn back(&mut self, _: Cmd) { self.backstack.shift_backward().cloned().map(|u| self.cd(u)); }
+}

yazi-core/src/tab/commands/cd.rs

@@ -33,6 +33,10 @@ impl Tab {
 	}
 
 	pub fn cd(&mut self, opt: impl Into<Opt>) {
+		if !self.try_escape_visual() {
+			return;
+		}
+
 		let opt = opt.into() as Opt;
 		if opt.interactive {
 			return self.cd_interactive();

yazi-core/src/tab/commands/copy.rs

@@ -13,8 +13,11 @@ impl From<Cmd> for Opt {
 }
 
 impl Tab {
-	pub fn copy(&self, opt: impl Into<Opt>) {
+	pub fn copy(&mut self, opt: impl Into<Opt>) {
 		let opt = opt.into() as Opt;
+		if !self.try_escape_visual() {
+			return;
+		}
 
 		let mut s = OsString::new();
 		let mut it = self.selected_or_hovered().into_iter().peekable();

yazi-core/src/tab/commands/enter.rs

@@ -1,40 +1,9 @@
-use std::mem;
+use yazi_shared::event::Cmd;
 
-use yazi_shared::{event::Cmd, render};
-
-use crate::{manager::Manager, tab::Tab};
-
-pub struct Opt;
-impl From<()> for Opt {
-	fn from(_: ()) -> Self { Self }
-}
-impl From<Cmd> for Opt {
-	fn from(_: Cmd) -> Self { Self }
-}
+use crate::tab::Tab;
 
 impl Tab {
-	pub fn enter(&mut self, _: impl Into<Opt>) {
-		let Some(hovered) = self.current.hovered().filter(|h| h.is_dir()).map(|h| h.url()) else {
-			return;
-		};
-
-		// Current
-		let rep = self.history_new(&hovered);
-		let rep = mem::replace(&mut self.current, rep);
-		if rep.cwd.is_regular() {
-			self.history.insert(rep.cwd.clone(), rep);
-		}
-
-		// Parent
-		if let Some(rep) = self.parent.take() {
-			self.history.insert(rep.cwd.clone(), rep);
-		}
-		self.parent = Some(self.history_new(&hovered.parent_url().unwrap()));
-
-		// Backstack
-		self.backstack.push(hovered);
-
-		Manager::_refresh();
-		render!();
+	pub fn enter(&mut self, _: Cmd) {
+		self.current.hovered().filter(|h| h.is_dir()).map(|h| h.url()).map(|u| self.cd(u));
 	}
 }