Latest version of the SMuFF firmware to be compiled in PlatformIO

This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.

SKR V1.4 TURBO Stepper Driver Jumper Configuration Manual

A how-to guide on how to install BigTreeTech Eddy Probe

This is my project to enable serial (UART) connected BigTreeTech-TouchScreens with Klipper by emulating anything it needs with macros.

grblHAL driver for LPC1968 and LPC1769

SKR PRO V1.1 Stepper Driver Jumper Configuration Manual

GTR V1.0 Stepper Driver Jumper Configuration Manual

SKR PRO V1.2 Stepper Driver Jumper Configuration Manual

SKR V1.3 Stepper Driver Jumper Configuration Manual

Ender 3 build featuring SKR Mini E3 V2.0 / Hemera / Filament Detection / BLTouch / UPS / Power Relay

A simple but hacky workaround for raising Klipper service priorities on lower end SBCs like BTT-CB1, to avoid timeouts and failed prints.

Firmware for Wanhao Duplicator i3 with BIGTREETECH SKR 2 board & TMC2209 Drivers

SKR V1.4 Stepper Driver Jumper Configuration Manual

OO C++ RepRap Firmware — Modification for BIGTREETECH-OCTOPUS-V1.1 on STM32F446ZET6 (512 KB)

3D Printer Klipper, Moonraker, KlipperScreen & Fluidd configs

BIGTREETECH - Pinouts, Diagrams and Notes

A Home Assistant Integration for Panda PWR

forked from bigtreetech/E3 RRF. how to enable wifi ESP07S with marlin 2.0.7.2 on BTT E3 RRF