Collection of AVR Programmers and Accessories

This library enables you to use Interrupt from Hardware Timers on supported Arduino boards such as AVR, ESP8266, ESP32, SAMD, SAM DUE, nRF52, Teensy, etc. These Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other softw…

Collection of AVR Development Boards

Atmel megaAVR: development platform for PlatformIO

A simple library that implements an automatic DDNS Update Client for SAM DUE, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, RP2040-based RASPBERRY_PI_PICO, Portenta_H7, etc. besides ESP8266/ESP32, using ESP8266-AT/ESP32-AT WiFi, WiFiNINA, Ethernet W5x00, ENC28J60 or LAN8742A. It is designed to be light-weight and currently supports DuckDNS, No-ip, …

Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43…

MCUprog UPDI is a windows program with CLI and GUI for programming various Microchip MCU devices using Microchip CMSIS-DAP based debuggers and standard TTL serial port.

This library enables you to use Hardware-based PWM channels on Generic boards to use PWM to control continuous Stepper Motor. The most important feature is they're purely hardware-based PWM channels, supporting very high PWM frequencies. Therefore, their executions are not blocked by bad-behaving functions or tasks

This library enables you to use Interrupt from Hardware Timers on an ATmega4809-based board, such as Arduino UNO WiFi Rev2, AVR_NANO_EVERY, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their exec…

This library enables you to use Interrupt from Hardware Timers on Arduino AVR ATtiny-based boards (ATtiny3217, etc.) using megaTinyCore. These ATtiny Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers …

あまり有益でもない Arduino 向けユーティリティツールボックス

This library enables you to use Hardware-based PWM channels on megaAVR-based boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.

UPDI (Unified Program and Debug Interface) host firmware over serial

Product of Open-Source-Software and Open-Source-Hardware Development for modernAVR

UPDI High-Voltage Programmer

This library enables you to use ISR-based PWM channels on Arduino megaAVR boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is …

My AVR Microcontroller Projects using AVR Microcontrollers MikroC Compiler and Atmel Studio

Macro/MicroAPI common submodule

AVR-GCC, AVR-LIBC and avrdude toolkit for Arduino IDE