drm : allow framebuffer and videomodes not to have same size #1

LongChair · 2017-04-24T07:49:33Z

DRM legacy doesn't allow that, will be only available with drm atomic.
Although, when running 4K modes, it's preferable to get a 1080p frambuffer that can be handlded properly by GPU and then use VOP to upscale that to 4K.

DRM legacy doesn't allow that, will be only available with drm atomic. Although, when running 4K modes, it's preferable to get a 1080p frambuffer that can be handlded properly by GPU and then use VOP to upscale that to 4K.

When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same time another core try to attach new UDC, which will cause deadlock as below scenario. Thus we should release ffs lock before issuing unregister_gadget_item(). [ 52.642225] c1 ====================================================== [ 52.642228] c1 [ INFO: possible circular locking dependency detected ] [ 52.642236] c1 4.4.6+ #1 Tainted: G W O [ 52.642241] c1 ------------------------------------------------------- [ 52.642245] c1 usb ffs open/2808 is trying to acquire lock: [ 52.642270] c0 (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642272] c1 but task is already holding lock: [ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642285] c1 which lock already depends on the new lock. [ 52.642287] c1 the existing dependency chain (in reverse order) is: [ 52.642295] c0 -> #1 (ffs_lock){+.+.+.}: [ 52.642307] c0 [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238 [ 52.642314] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642322] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642328] c0 [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8 [ 52.642334] c0 [<ffffffc000654004>] usb_add_function+0x84/0x184 [ 52.642340] c0 [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c [ 52.642346] c0 [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c [ 52.642352] c0 [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8 [ 52.642358] c0 [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128 [ 52.642369] c0 [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c [ 52.642376] c0 [<ffffffc00023c054>] vfs_write+0xb8/0x214 [ 52.642381] c0 [<ffffffc00023cad4>] SyS_write+0x54/0xb0 [ 52.642388] c0 [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28 [ 52.642395] c0 -> #0 (udc_lock){+.+.+.}: [ 52.642401] c0 [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4 [ 52.642407] c0 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642412] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642420] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642427] c0 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642432] c0 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642439] c0 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642444] c0 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642450] c0 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642454] c0 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642460] c0 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642466] c0 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642473] c0 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642482] c0 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642487] c0 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642494] c0 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642501] c0 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642507] c0 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642512] c0 [<ffffffc000085ee8>] work_pending+0x1c/0x20 [ 52.642514] c1 other info that might help us debug this: [ 52.642517] c1 Possible unsafe locking scenario: [ 52.642518] c1 CPU0 CPU1 [ 52.642520] c1 ---- ---- [ 52.642525] c0 lock(ffs_lock); [ 52.642529] c0 lock(udc_lock); [ 52.642533] c0 lock(ffs_lock); [ 52.642537] c0 lock(udc_lock); [ 52.642539] c1 *** DEADLOCK *** [ 52.642543] c1 1 lock held by usb ffs open/2808: [ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642557] c1 stack backtrace: [ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G [ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT) [ 52.642568] c1 Call trace: [ 52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170 [ 52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28 [ 52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0 [ 52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4 [ 52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20 Change-Id: I4ff1d8dbcaedb7df05ff26c2d8a61b153a025e88 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: William Wu <william.wu@rock-chips.com> (cherry picked from commit b3ce3ce)

We WRONGLY supposed both REGULATOR_EVENT_PRE_VOLTAGE_CHANGE and REGULATOR_EVENT_VOLTAGE_CHANGE were used in pairs. If volts are not changed in volts setting process, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE is NOT sent,but REGULATOR_EVENT_VOLTAGE_CHANGE is sent. So we check the lock status before we release the lock. [ 3.535657] ===================================== [ 3.535703] [ BUG: bad unlock balance detected! ] [ 3.535757] 4.4.55 #2 Not tainted [ 3.535800] ------------------------------------- [ 3.535847] cfinteractive/65 is trying to release lock (thermal_reg_mutex) at: [ 3.535969] [<ffffff8008c23ca4>] mutex_unlock+0xc/0x14 [ 3.536015] but there are no more locks to release! [ 3.536058] wifi_platform_bus_enumerate device present 1 [ 3.536076] [ 3.536076] other info that might help us debug this: [ 3.536088] ======== Card detection to detect SDIO card! ======== [ 3.536104] 4 locks held by cfinteractive/65: [ 3.536115] mmc2:mmc host rescan start! [ 3.536123] #0: (&policy->rwsem){+.+.+.}, at: [<ffffff8008829734>] cpufreq_interactive_speedchange_task+0x138/0x48c [ 3.536323] #1: (&pcpu->enable_sem){++++..}, at: [<ffffff8008829740>] cpufreq_interactive_speedchange_task+0x144/0x48c [ 3.536510] #2: (&rdev->mutex){+.+.+.}, at: [<ffffff8008472948>] regulator_set_voltage+0x34/0x90 [ 3.536700] #3: (&(&rdev->notifier)->rwsem){.+.+..}, at: [<ffffff80080c0558>] __blocking_notifier_call_chain+0x30/0x64 [ 3.536892] [ 3.536892] stack backtrace: [ 3.536962] CPU: 2 PID: 65 Comm: cfinteractive Not tainted 4.4.55 #2 [ 3.537011] Hardware name: Rockchip rk3368 p9 board (DT) [ 3.537056] Call trace: [ 3.537118] [<ffffff8008088a4c>] dump_backtrace+0x0/0x1c4 [ 3.537182] [<ffffff8008088c24>] show_stack+0x14/0x1c [ 3.537249] [<ffffff80083ada90>] dump_stack+0xa8/0xe0 [ 3.537317] [<ffffff8008186c04>] print_unlock_imbalance_bug.part.25+0xbc/0xcc [ 3.537386] [<ffffff80080f8210>] lock_release+0x218/0x464 [ 3.537448] [<ffffff8008c23c1c>] __mutex_unlock_slowpath+0xf4/0x170 [ 3.537507] [<ffffff8008c23ca4>] mutex_unlock+0xc/0x14 [ 3.537573] [<ffffff800880510c>] rk3368_thermal_notify+0x5c/0x68 [ 3.537637] [<ffffff80080c0248>] notifier_call_chain+0x54/0x88 [ 3.537702] [<ffffff80080c0570>] __blocking_notifier_call_chain+0x48/0x64 [ 3.537768] [<ffffff80080c05a0>] blocking_notifier_call_chain+0x14/0x1c [ 3.537837] [<ffffff80084701d0>] _regulator_do_set_voltage+0x3dc/0x61c [ 3.537904] [<ffffff80084705b8>] regulator_set_voltage_unlocked+0x1a8/0x208 [ 3.537971] [<ffffff8008472970>] regulator_set_voltage+0x5c/0x90 [ 3.538039] [<ffffff800850708c>] _set_opp_voltage+0x44/0xa4 [ 3.538104] [<ffffff8008508400>] dev_pm_opp_set_rate+0x47c/0x540 [ 3.538168] [<ffffff800882be30>] set_target+0x30/0x38 [ 3.538234] [<ffffff80088222e0>] __cpufreq_driver_target+0x1d8/0x298 [ 3.538298] [<ffffff800882986c>] cpufreq_interactive_speedchange_task+0x270/0x48c [ 3.538360] [<ffffff80080bee1c>] kthread+0xf4/0xfc [ 3.538419] [<ffffff80080826d0>] ret_from_fork+0x10/0x40 Change-Id: I8a89bde9ff6ec83255b8a4c017e6ff792535ebb8 Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>

phys_to_virt not support highmem. [ 38.247986] Unable to handle kernel paging request at virtual address 20857000 [ 38.306701] pgd = ed418000 [ 38.309505] [20857000] *pgd=00000000 [ 38.313118] Internal error: Oops: 2805 [#1] PREEMPT SMP ARM [ 38.318682] Modules linked in: [ 38.321746] CPU: 2 PID: 1410 Comm: DisplayThread Not tainted 4.4.55 rockchip-linux#156 [ 38.328435] Hardware name: Rockchip (Device Tree) [ 38.333131] task: dd2ad480 ti: dcc08000 task.ti: dcc08000 [ 38.338527] PC is at v7_dma_flush_range+0x1c/0x34 [ 38.343225] LR is at rga_dma_flush_range+0x30/0x68 [ 39.215229] [<c0117440>] (v7_dma_flush_range) from [<c03f969c>] (rga_dma_flush_range+0x30/0x68) [ 39.223918] [<c03f969c>] (rga_dma_flush_range) from [<c03f98f4>] (rga2_MapUserMemory+0x220/0x2b0) [ 39.232777] [<c03f98f4>] (rga2_MapUserMemory) from [<c03f9bd4>] (rga2_set_mmu_info+0x1bc/0x928) [ 39.241461] [<c03f9bd4>] (rga2_set_mmu_info) from [<c03f8930>] (rga2_blit+0x2f4/0x448) [ 39.249366] [<c03f8930>] (rga2_blit) from [<c03f8ae8>] (rga2_blit_sync+0x64/0x1b0) [ 39.256923] [<c03f8ae8>] (rga2_blit_sync) from [<c03f91dc>] (rga_ioctl+0x4d0/0x6d8) [ 39.264570] [<c03f91dc>] (rga_ioctl) from [<c023ea58>] (do_vfs_ioctl+0x564/0x6a0) [ 39.272042] [<c023ea58>] (do_vfs_ioctl) from [<c023ebe0>] (SyS_ioctl+0x4c/0x74) [ 39.279342] [<c023ebe0>] (SyS_ioctl) from [<c0107180>] (ret_fast_syscall+0x0/0x3c) Change-Id: I81fe2d108932a96414a2822c1329c4335753d1d9 Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

mipsxx_pmu_handle_shared_irq() calls irq_work_run() while holding the pmuint_rwlock for read. irq_work_run() can, via perf_pending_event(), call try_to_wake_up() which can try to take rq->lock. However, perf can also call perf_pmu_enable() (and thus take the pmuint_rwlock for write) while holding the rq->lock, from finish_task_switch() via perf_event_context_sched_in(). This leads to an ABBA deadlock: PID: 3855 TASK: 8f7ce288 CPU: 2 COMMAND: "process" #0 [89c39ac8] __delay at 803b5be4 #1 [89c39ac8] do_raw_spin_lock at 8008fdcc #2 [89c39af8] try_to_wake_up at 8006e47c #3 [89c39b38] pollwake at 8018eab0 #4 [89c39b68] __wake_up_common at 800879f4 #5 [89c39b98] __wake_up at 800880e4 #6 [89c39bc8] perf_event_wakeup at 8012109c #7 [89c39be8] perf_pending_event at 80121184 #8 [89c39c08] irq_work_run_list at 801151f0 #9 [89c39c38] irq_work_run at 80115274 #10 [89c39c50] mipsxx_pmu_handle_shared_irq at 8002cc7c PID: 1481 TASK: 8eaac6a8 CPU: 3 COMMAND: "process" #0 [8de7f900] do_raw_write_lock at 800900e0 #1 [8de7f918] perf_event_context_sched_in at 80122310 #2 [8de7f938] __perf_event_task_sched_in at 80122608 #3 [8de7f958] finish_task_switch at 8006b8a4 #4 [8de7f998] __schedule at 805e4dc4 #5 [8de7f9f8] schedule at 805e5558 #6 [8de7fa10] schedule_hrtimeout_range_clock at 805e9984 #7 [8de7fa70] poll_schedule_timeout at 8018e8f8 #8 [8de7fa88] do_select at 8018f338 #9 [8de7fd88] core_sys_select at 8018f5cc #10 [8de7fee0] sys_select at 8018f854 #11 [8de7ff28] syscall_common at 80028fc8 The lock seems to be there to protect the hardware counters so there is no need to hold it across irq_work_run(). Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

calculate_min_delta() may incorrectly access a 4th element of buf2[] which only has 3 elements. This may trigger undefined behaviour and has been reported to cause strange crashes in start_kernel() sometime after timer initialization when built with GCC 5.3, possibly due to register/stack corruption: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns CPU 0 Unable to handle kernel paging request at virtual address ffffb0aa, epc == 8067daa8, ra == 8067da84 Oops[#1]: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 rockchip-linux#51 task: 8065e3e0 task.stack: 80644000 $ 0 : 00000000 00000001 00000000 00000000 $ 4 : 8065b4d0 00000000 805d0000 00000010 $ 8 : 00000010 80321400 fffff000 812de408 $12 : 00000000 00000000 00000000 ffffffff $16 : 00000002 ffffffff 80660000 806a666c $20 : 806c0000 00000000 00000000 00000000 $24 : 00000000 00000010 $28 : 80644000 80645ed0 00000000 8067da84 Hi : 00000000 Lo : 00000000 epc : 8067daa8 start_kernel+0x33c/0x500 ra : 8067da84 start_kernel+0x318/0x500 Status: 11000402 KERNEL EXL Cause : 4080040c (ExcCode 03) BadVA : ffffb0aa PrId : 0501992c (MIPS 1004Kc) Modules linked in: Process swapper/0 (pid: 0, threadinfo=80644000, task=8065e3e0, tls=00000000) Call Trace: [<8067daa8>] start_kernel+0x33c/0x500 Code: 24050240 0c0131f9 24849c64 <a200b0a8> 41606020 000000c0 0c1a45e6 00000000 0c1a5f44 UBSAN also detects the same issue: ================================================================ UBSAN: Undefined behaviour in arch/mips/kernel/cevt-r4k.c:85:41 load of address 80647e4c with insufficient space for an object of type 'unsigned int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 rockchip-linux#47 Call Trace: [<80028f70>] show_stack+0x88/0xa4 [<80312654>] dump_stack+0x84/0xc0 [<8034163c>] ubsan_epilogue+0x14/0x50 [<803417d8>] __ubsan_handle_type_mismatch+0x160/0x168 [<8002dab0>] r4k_clockevent_init+0x544/0x764 [<80684d34>] time_init+0x18/0x90 [<8067fa5c>] start_kernel+0x2f0/0x500 ================================================================= buf2[] is intentionally only 3 elements so that the last element is the median once 5 samples have been inserted, so explicitly prevent the possibility of comparing against the 4th element rather than extending the array. Fixes: 1fa4055 ("MIPS: cevt-r4k: Dynamically calculate min_delta_ns") Reported-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.7.x- Patchwork: https://patchwork.linux-mips.org/patch/15892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Sean Wang says: ==================== mediatek: Fix crash caused by reporting inconsistent skb->len to BQL Changes since v1: - fix inconsistent enumeration which easily causes the potential bug The series fixes kernel BUG caused by inconsistent SKB length reported into BQL. The reason for inconsistent length comes from hardware BUG which results in different port number carried on the TXD within the lifecycle of SKB. So patch 2) is proposed for use a software way to track which port the SKB involving instead of hardware way. And patch 1) is given for another issue I found which causes TXD and SKB inconsistency that is not expected in the initial logic, so it is also being corrected it in the series. The log for the kernel BUG caused by the issue is posted as below. [ 120.825955] kernel BUG at ... lib/dynamic_queue_limits.c:26! [ 120.837684] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 120.842778] Modules linked in: [ 120.845811] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-191576-gdbcef47 #35 [ 120.853488] Hardware name: Mediatek Cortex-A7 (Device Tree) [ 120.859012] task: c1007480 task.stack: c1000000 [ 120.863510] PC is at dql_completed+0x108/0x17c [ 120.867915] LR is at 0x46 [ 120.870512] pc : [<c03c19c8>] lr : [<00000046>] psr: 80000113 [ 120.870512] sp : c1001d58 ip : c1001d80 fp : c1001d7c [ 120.881895] r10: 0000003e r9 : df6b3400 r8 : 0ed86506 [ 120.887075] r7 : 00000001 r6 : 00000001 r5 : 0ed8654c r4 : df0135d8 [ 120.893546] r3 : 00000001 r2 : df016800 r1 : 0000fece r0 : df6b3480 [ 120.900018] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 120.907093] Control: 10c5387d Table: 9e27806a DAC: 00000051 [ 120.912789] Process swapper/0 (pid: 0, stack limit = 0xc1000218) [ 120.918744] Stack: (0xc1001d58 to 0xc1002000) .... 121.085331] 1fc0: 00000000 c0a52a28 00000000 c10855d4 c1003c58 c0a52a24 c100885c 8000406a [ 121.093444] 1fe0: 410fc073 00000000 00000000 c1001ff8 8000807c c0a009cc 00000000 00000000 [ 121.101575] [<c03c19c8>] (dql_completed) from [<c04cb010>] (mtk_napi_tx+0x1d0/0x37c) [ 121.109263] [<c04cb010>] (mtk_napi_tx) from [<c05e28cc>] (net_rx_action+0x24c/0x3b8) [ 121.116951] [<c05e28cc>] (net_rx_action) from [<c010152c>] (__do_softirq+0xe4/0x35c) [ 121.124638] [<c010152c>] (__do_softirq) from [<c012a624>] (irq_exit+0xe8/0x150) [ 121.131895] [<c012a624>] (irq_exit) from [<c017750c>] (__handle_domain_irq+0x70/0xc4) [ 121.139666] [<c017750c>] (__handle_domain_irq) from [<c0101404>] (gic_handle_irq+0x58/0x9c) [ 121.147953] [<c0101404>] (gic_handle_irq) from [<c010e18c>] (__irq_svc+0x6c/0x90) [ 121.155373] Exception stack(0xc1001ef8 to 0xc1001f40) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel OOPS: Bad kernel stack pointer cd93c840 at c000000000009868 Oops: Bad kernel stack pointer, sig: 6 [#1] ... GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840 ... NIP [c000000000009868] resume_kernel+0x2c/0x58 LR [c000000000006208] program_check_common+0x108/0x180 On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does not emulate actual store in emulate_step() because it may corrupt the exception frame. So the kernel does the actual store operation in exception return code i.e. resume_kernel(). resume_kernel() loads the saved stack pointer from memory using lwz, which only loads the low 32-bits of the address, causing the kernel crash. Fix this by loading the 64-bit value instead. Fixes: be96f63 ("powerpc: Split out instruction analysis part of emulate_step()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> [mpe: Change log massage, add stable tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ rockchip-linux#250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d399 ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ rockchip-linux#251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>

keep tty driver until usb driver is unregistered rmmod hso produces traces like this without that: [40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap [40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800 [40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem [40261.880279] usb 2-2: Manufacturer: Option N.V. [40262.021270] hso 2-2:1.5: Not our interface [40265.556945] hso: unloaded [40265.559875] usbcore: deregistering interface driver hso [40265.595947] Unable to handle kernel NULL pointer dereference at virtual address 00000033 [40265.604522] pgd = ecb14000 [40265.611877] [00000033] *pgd=00000000 [40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect [40265.698211] sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso] [40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6 [40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree) [40265.736938] task: ecb81100 task.stack: ecb82000 [40265.741729] PC is at cdev_del+0xc/0x2c [40265.745666] LR is at tty_unregister_device+0x40/0x50 [40265.750915] pc : [<c027472c>] lr : [<c04b3ecc>] psr: 600b0113 sp : ecb83ea8 ip : eca4f898 fp : 00000000 [40265.763000] r10: 00000000 r9 : 00000000 r8 : 00000001 [40265.768493] r7 : eca4f800 r6 : 00000003 r5 : 00000000 r4 : ffffffff [40265.775360] r3 : c1458d54 r2 : 00000000 r1 : 00000004 r0 : ffffffff [40265.782257] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [40265.789764] Control: 10c5387d Table: acb14019 DAC: 00000051 [40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218) [40265.802062] Stack: (0xecb83ea8 to 0xecb84000) [40265.806640] 3ea0: ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec [40265.815277] 3ec0: eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04 [40265.823883] 3ee0: eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4 [40265.832519] 3f00: ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081 [40265.841125] 3f20: c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88 [40265.849731] 3f40: bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368 [40265.858367] 3f60: ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4 [40265.866973] 3f80: ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220 [40265.875579] 3fa0: bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800 [40265.884216] 3fc0: 7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000 [40265.892822] 3fe0: b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff [40265.901458] [<c027472c>] (cdev_del) from [<c04b3ecc>] (tty_unregister_device+0x40/0x50) [40265.909942] [<c04b3ecc>] (tty_unregister_device) from [<bf7327ec>] (hso_free_interface+0x80/0x144 [hso]) [40265.919982] [<bf7327ec>] (hso_free_interface [hso]) from [<bf7328bc>] (hso_disconnect+0xc/0x18 [hso]) [40265.929718] [<bf7328bc>] (hso_disconnect [hso]) from [<c05a9a04>] (usb_unbind_interface+0x84/0x200) [40265.939239] [<c05a9a04>] (usb_unbind_interface) from [<c04e6960>] (device_release_driver_internal+0x138/0x1cc) [40265.949798] [<c04e6960>] (device_release_driver_internal) from [<c04e6a60>] (driver_detach+0x60/0x6c) [40265.959503] [<c04e6a60>] (driver_detach) from [<c04e5d94>] (bus_remove_driver+0x64/0x8c) [40265.968017] [<c04e5d94>] (bus_remove_driver) from [<c05a8f88>] (usb_deregister+0x5c/0xb8) [40265.976654] [<c05a8f88>] (usb_deregister) from [<c01c4afc>] (SyS_delete_module+0x160/0x1dc) [40265.985443] [<c01c4afc>] (SyS_delete_module) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [40265.994171] Code: c1458d54 e59f3020 e92d4010 e1a04000 (e5941034) [40266.016693] ---[ end trace 9d5ac43c7e41075c ]--- Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit d5afb6f ] The code where sk_clone() came from created a new socket and locked it, but then, on the error path didn't unlock it. This problem stayed there for a long while, till b0691c8 ("net: Unlock sock before calling sk_free()") fixed it, but unfortunately the callers of sk_clone() (now sk_clone_locked()) were not audited and the one in dccp_create_openreq_child() remained. Now in the age of the syskaller fuzzer, this was finally uncovered, as reported by Dmitry: ---- 8< ---- I've got the following report while running syzkaller fuzzer on 86292b3 ("Merge branch 'akpm' (patches from Andrew)") [ BUG: held lock freed! ] 4.10.0+ rockchip-linux#234 Not tainted ------------------------- syz-executor6/6898 is freeing memory ffff88006286cac0-ffff88006286d3b7, with a lock still held there! (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 5 locks held by syz-executor6/6898: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock include/net/sock.h:1460 [inline] #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681 #1: (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>] inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126 #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink include/linux/skbuff.h:1767 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue include/linux/skbuff.h:1783 [inline] #2: (rcu_read_lock){......}, at: [<ffffffff8369b424>] process_backlog+0x264/0x730 net/core/dev.c:4835 #3: (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>] ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59 #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock include/linux/spinlock.h:299 [inline] #4: (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504 Fix it just like was done by b0691c8 ("net: Unlock sock before calling sk_free()"). Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With ARM64_64K_PAGES and RANDOMIZE_TEXT_OFFSET enabled, we hit the following issue on the boot: kernel BUG at arch/arm64/mm/mmu.c:480! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0 rockchip-linux#310 Hardware name: ARM Juno development board (r2) (DT) task: ffff000008d58a80 ti: ffff000008d30000 task.ti: ffff000008d30000 PC is at map_kernel_segment+0x44/0xb0 LR is at paging_init+0x84/0x5b0 pc : [<ffff000008c450b4>] lr : [<ffff000008c451a4>] pstate: 600002c5 Call trace: [<ffff000008c450b4>] map_kernel_segment+0x44/0xb0 [<ffff000008c451a4>] paging_init+0x84/0x5b0 [<ffff000008c42728>] setup_arch+0x198/0x534 [<ffff000008c40848>] start_kernel+0x70/0x388 [<ffff000008c401bc>] __primary_switched+0x30/0x74 Commit 7eb90f2 ("arm64: cover the .head.text section in the .text segment mapping") removed the alignment between the .head.text and .text sections, and used the _text rather than the _stext interval for mapping the .text segment. Prior to this commit _stext was always section aligned and didn't cause any issue even when RANDOMIZE_TEXT_OFFSET was enabled. Since that alignment has been removed and _text is used to map the .text segment, we need ensure _text is always page aligned when RANDOMIZE_TEXT_OFFSET is enabled. This patch adds logic to TEXT_OFFSET fuzzing to ensure that the offset is always aligned to the kernel page size. To ensure this, we rely on the PAGE_SHIFT being available via Kconfig. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 7eb90f2 ("arm64: cover the .head.text section in the .text segment mapping") Signed-off-by: Will Deacon <will.deacon@arm.com> (cherry picked from commit aed7eb8) Signed-off-by: Alex Shi <alex.shi@linaro.org>

commit ab2a4bf upstream. The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 707e59b upstream. The following commit: 1fb3a8b ("xen/spinlock: Fix locking path engaging too soon under PVHVM.") ... moved the initalization of the kicker interrupt until after native_cpu_up() is called. However, when using qspinlocks, a CPU may try to kick another CPU that is spinning (because it has not yet initialized its kicker interrupt), resulting in the following crash during boot: kernel BUG at /build/linux-Ay7j_C/linux-4.4.0/drivers/xen/events/events_base.c:1210! invalid opcode: 0000 [#1] SMP ... RIP: 0010:[<ffffffff814c97c9>] [<ffffffff814c97c9>] xen_send_IPI_one+0x59/0x60 ... Call Trace: [<ffffffff8102be9e>] xen_qlock_kick+0xe/0x10 [<ffffffff810cabc2>] __pv_queued_spin_unlock+0xb2/0xf0 [<ffffffff810ca6d1>] ? __raw_callee_save___pv_queued_spin_unlock+0x11/0x20 [<ffffffff81052936>] ? check_tsc_warp+0x76/0x150 [<ffffffff81052aa6>] check_tsc_sync_source+0x96/0x160 [<ffffffff81051e28>] native_cpu_up+0x3d8/0x9f0 [<ffffffff8102b315>] xen_hvm_cpu_up+0x35/0x80 [<ffffffff8108198c>] _cpu_up+0x13c/0x180 [<ffffffff81081a4a>] cpu_up+0x7a/0xa0 [<ffffffff81f80dfc>] smp_init+0x7f/0x81 [<ffffffff81f5a121>] kernel_init_freeable+0xef/0x212 [<ffffffff81817f30>] ? rest_init+0x80/0x80 [<ffffffff81817f3e>] kernel_init+0xe/0xe0 [<ffffffff8182488f>] ret_from_fork+0x3f/0x70 [<ffffffff81817f30>] ? rest_init+0x80/0x80 To fix this, only send the kick if the target CPU's interrupt has been initialized. This check isn't racy, because the target is waiting for the spinlock, so it won't have initialized the interrupt in the meantime. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xenproject.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7b2db29 upstream. If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae8 ("xhci: Enable LPM support only for hardwired ...") Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6207119 upstream. With this reproducer: struct sockaddr_alg alg = { .salg_family = 0x26, .salg_type = "hash", .salg_feat = 0xf, .salg_mask = 0x5, .salg_name = "digest_null", }; int sock, sock2; sock = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(sock, (struct sockaddr *)&alg, sizeof(alg)); sock2 = accept(sock, NULL, NULL); setsockopt(sock, SOL_ALG, ALG_SET_KEY, "\x9b\xca", 2); accept(sock2, NULL, NULL); ==== 8< ======== 8< ======== 8< ======== 8< ==== one can immediatelly see an UBSAN warning: UBSAN: Undefined behaviour in crypto/algif_hash.c:187:7 variable length array bound value 0 <= 0 CPU: 0 PID: 15949 Comm: syz-executor Tainted: G E 4.4.30-0-default #1 ... Call Trace: ... [<ffffffff81d598fd>] ? __ubsan_handle_vla_bound_not_positive+0x13d/0x188 [<ffffffff81d597c0>] ? __ubsan_handle_out_of_bounds+0x1bc/0x1bc [<ffffffffa0e2204d>] ? hash_accept+0x5bd/0x7d0 [algif_hash] [<ffffffffa0e2293f>] ? hash_accept_nokey+0x3f/0x51 [algif_hash] [<ffffffffa0e206b0>] ? hash_accept_parent_nokey+0x4a0/0x4a0 [algif_hash] [<ffffffff8235c42b>] ? SyS_accept+0x2b/0x40 It is a correct warning, as hash state is propagated to accept as zero, but creating a zero-length variable array is not allowed in C. Fix this as proposed by Herbert -- do "?: 1" on that site. No sizeof or similar happens in the code there, so we just allocate one byte even though we do not use the array. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> (maintainer:CRYPTO API) Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c282222 upstream. Dmitry reports following splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 13059 Comm: syz-executor1 Not tainted 4.10.0-rc7-next-20170207 #1 [..] spin_lock_bh include/linux/spinlock.h:304 [inline] xfrm_policy_flush+0x32/0x470 net/xfrm/xfrm_policy.c:963 xfrm_policy_fini+0xbf/0x560 net/xfrm/xfrm_policy.c:3041 xfrm_net_init+0x79f/0x9e0 net/xfrm/xfrm_policy.c:3091 ops_init+0x10a/0x530 net/core/net_namespace.c:115 setup_net+0x2ed/0x690 net/core/net_namespace.c:291 copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396 create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] Problem is that when we get error during xfrm_net_init we will call xfrm_policy_fini which will acquire xfrm_policy_lock before it was initialized. Just move it around so locks get set up first. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 283bc9f ("xfrm: Namespacify xfrm state/policy locks") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…e_pmd() commit c9d398f upstream. I found the race condition which triggers the following bug when move_pages() and soft offline are called on a single hugetlb page concurrently. Soft offlining page 0x119400 at 0x700000000000 BUG: unable to handle kernel paging request at ffffea0011943820 IP: follow_huge_pmd+0x143/0x190 PGD 7ffd2067 PUD 7ffd1067 PMD 0 [61163.582052] Oops: 0000 [#1] SMP Modules linked in: binfmt_misc ppdev virtio_balloon parport_pc pcspkr i2c_piix4 parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi virtio_blk 8139too crc32c_intel ata_piix serio_raw libata virtio_pci 8139cp virtio_ring virtio mii floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: cap_check] CPU: 0 PID: 22573 Comm: iterate_numa_mo Tainted: P OE 4.11.0-rc2-mm1+ #2 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:follow_huge_pmd+0x143/0x190 RSP: 0018:ffffc90004bdbcd0 EFLAGS: 00010202 RAX: 0000000465003e80 RBX: ffffea0004e34d30 RCX: 00003ffffffff000 RDX: 0000000011943800 RSI: 0000000000080001 RDI: 0000000465003e80 RBP: ffffc90004bdbd18 R08: 0000000000000000 R09: ffff880138d34000 R10: ffffea0004650000 R11: 0000000000c363b0 R12: ffffea0011943800 R13: ffff8801b8d34000 R14: ffffea0000000000 R15: 000077ff80000000 FS: 00007fc977710740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0011943820 CR3: 000000007a746000 CR4: 00000000001406f0 Call Trace: follow_page_mask+0x270/0x550 SYSC_move_pages+0x4ea/0x8f0 SyS_move_pages+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fc976e03949 RSP: 002b:00007ffe72221d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000117 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc976e03949 RDX: 0000000000c22390 RSI: 0000000000001400 RDI: 0000000000005827 RBP: 00007ffe72221e00 R08: 0000000000c2c3a0 R09: 0000000000000004 R10: 0000000000c363b0 R11: 0000000000000246 R12: 0000000000400650 R13: 00007ffe72221ee0 R14: 0000000000000000 R15: 0000000000000000 Code: 81 e4 ff ff 1f 00 48 21 c2 49 c1 ec 0c 48 c1 ea 0c 4c 01 e2 49 bc 00 00 00 00 00 ea ff ff 48 c1 e2 06 49 01 d4 f6 45 bc 04 74 90 <49> 8b 7c 24 20 40 f6 c7 01 75 2b 4c 89 e7 8b 47 1c 85 c0 7e 2a RIP: follow_huge_pmd+0x143/0x190 RSP: ffffc90004bdbcd0 CR2: ffffea0011943820 ---[ end trace e4f81353a2d23232 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled This bug is triggered when pmd_present() returns true for non-present hugetlb, so fixing the present check in follow_huge_pmd() prevents it. Using pmd_present() to determine present/non-present for hugetlb is not correct, because pmd_present() checks multiple bits (not only _PAGE_PRESENT) for historical reason and it can misjudge hugetlb state. Fixes: e66f17f ("mm/hugetlb: take page table lock in follow_huge_pmd()") Link: http://lkml.kernel.org/r/1490149898-20231-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0beb201 upstream. Holding the reconfig_mutex over a potential userspace fault sets up a lockdep dependency chain between filesystem-DAX and the libnvdimm ioctl path. Move the user access outside of the lock. [ INFO: possible circular locking dependency detected ] 4.11.0-rc3+ #13 Tainted: G W O ------------------------------------------------------- fallocate/16656 is trying to acquire lock: (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffa00080b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm] but task is already holding lock: (jbd2_handle){++++..}, at: [<ffffffff813b4944>] start_this_handle+0x104/0x460 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (jbd2_handle){++++..}: lock_acquire+0xbd/0x200 start_this_handle+0x16a/0x460 jbd2__journal_start+0xe9/0x2d0 __ext4_journal_start_sb+0x89/0x1c0 ext4_dirty_inode+0x32/0x70 __mark_inode_dirty+0x235/0x670 generic_update_time+0x87/0xd0 touch_atime+0xa9/0xd0 ext4_file_mmap+0x90/0xb0 mmap_region+0x370/0x5b0 do_mmap+0x415/0x4f0 vm_mmap_pgoff+0xd7/0x120 SyS_mmap_pgoff+0x1c5/0x290 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xc2 -> #1 (&mm->mmap_sem){++++++}: lock_acquire+0xbd/0x200 __might_fault+0x70/0xa0 __nd_ioctl+0x683/0x720 [libnvdimm] nvdimm_ioctl+0x8b/0xe0 [libnvdimm] do_vfs_ioctl+0xa8/0x740 SyS_ioctl+0x79/0x90 do_syscall_64+0x6c/0x200 return_from_SYSCALL_64+0x0/0x7a -> #0 (&nvdimm_bus->reconfig_mutex){+.+.+.}: __lock_acquire+0x16b6/0x1730 lock_acquire+0xbd/0x200 __mutex_lock+0x88/0x9b0 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_forget_poison+0x25/0x50 [libnvdimm] nvdimm_clear_poison+0x106/0x140 [libnvdimm] pmem_do_bvec+0x1c2/0x2b0 [nd_pmem] pmem_make_request+0xf9/0x270 [nd_pmem] generic_make_request+0x118/0x3b0 submit_bio+0x75/0x150 Fixes: 62232e4 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 40bea97 upstream. relay_open() may return NULL, check the return value to avoid the crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] PGD 41cf28067 PUD 41be92067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35 Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15 07/04/2011 task: ffffffff81e0c4c0 task.stack: ffffffff81e00000 RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common] RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98 RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0 Stack: 0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9 000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0 0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60 Call Trace: <IRQ> [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k] [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0 [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0 Reported-by: Devin Tuchsen <devin.tuchsen@gmail.com> Tested-by: Devin Tuchsen <devin.tuchsen@gmail.com> Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 43fab97 upstream. As reported by Marc Duponcheel <marc@offline.be>, firmware load on dvb-usb is using the stack, with is not allowed anymore on default Kernel configurations: [ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware [ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 1025.958855] dvb-usb: could not stop the USB controller CPU. [ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3) [ 1025.958856] dvb-usb: firmware download failed at 8 with -22 [ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u [ 2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 2.789905] ------------[ cut here ]------------ [ 2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789912] transfer buffer not dma capable [ 2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod [ 2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1 [ 2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013 [ 2.789938] ffffc9000339b690 ffffffff812bd397 ffffc9000339b6e0 0000000000000000 [ 2.789939] ffffc9000339b6d0 ffffffff81055c86 000006300339b6a0 ffff880116c0c000 [ 2.789941] 0000000000000000 0000000000000000 0000000000000001 ffff880116c08000 [ 2.789942] Call Trace: [ 2.789945] [<ffffffff812bd397>] dump_stack+0x4d/0x66 [ 2.789947] [<ffffffff81055c86>] __warn+0xc6/0xe0 [ 2.789948] [<ffffffff81055cea>] warn_slowpath_fmt+0x4a/0x50 [ 2.789952] [<ffffffffa006d460>] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [ 2.789954] [<ffffffff814ed5a8>] ? io_schedule_timeout+0xd8/0x110 [ 2.789956] [<ffffffffa006e09c>] usb_hcd_submit_urb+0x9c/0x980 [usbcore] [ 2.789958] [<ffffffff812d0ebf>] ? copy_page_to_iter+0x14f/0x2b0 [ 2.789960] [<ffffffff81126818>] ? pagecache_get_page+0x28/0x240 [ 2.789962] [<ffffffff8118c2a0>] ? touch_atime+0x20/0xa0 [ 2.789964] [<ffffffffa006f7c4>] usb_submit_urb+0x2c4/0x520 [usbcore] [ 2.789967] [<ffffffffa006feca>] usb_start_wait_urb+0x5a/0xe0 [usbcore] [ 2.789969] [<ffffffffa007000c>] usb_control_msg+0xbc/0xf0 [usbcore] [ 2.789970] [<ffffffffa067903d>] usb_cypress_writemem+0x3d/0x40 [dvb_usb] [ 2.789972] [<ffffffffa06791cf>] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb] [ 2.789973] [<ffffffff8109dbbe>] ? console_unlock+0x2fe/0x5d0 [ 2.789974] [<ffffffff8109e10c>] ? vprintk_emit+0x27c/0x410 [ 2.789975] [<ffffffff8109e40a>] ? vprintk_default+0x1a/0x20 [ 2.789976] [<ffffffff81124d76>] ? printk+0x43/0x4b [ 2.789977] [<ffffffffa0679310>] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb] [ 2.789979] [<ffffffffa0679898>] dvb_usb_device_init+0x3d8/0x610 [dvb_usb] [ 2.789981] [<ffffffffa069e302>] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u] [ 2.789984] [<ffffffffa007420c>] usb_probe_interface+0xfc/0x270 [usbcore] [ 2.789985] [<ffffffff8138bf95>] driver_probe_device+0x215/0x2d0 [ 2.789986] [<ffffffff8138c0e6>] __driver_attach+0x96/0xa0 [ 2.789987] [<ffffffff8138c050>] ? driver_probe_device+0x2d0/0x2d0 [ 2.789988] [<ffffffff81389ffb>] bus_for_each_dev+0x5b/0x90 [ 2.789989] [<ffffffff8138b7b9>] driver_attach+0x19/0x20 [ 2.789990] [<ffffffff8138b33c>] bus_add_driver+0x11c/0x220 [ 2.789991] [<ffffffff8138c91b>] driver_register+0x5b/0xd0 [ 2.789994] [<ffffffffa0072f6c>] usb_register_driver+0x7c/0x130 [usbcore] [ 2.789994] [<ffffffffa06a5000>] ? 0xffffffffa06a5000 [ 2.789996] [<ffffffffa06a501e>] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dtt200u] [ 2.789997] [<ffffffff81000408>] do_one_initcall+0x38/0x140 [ 2.789998] [<ffffffff8116001c>] ? __vunmap+0x7c/0xc0 [ 2.789999] [<ffffffff81124fb0>] ? do_init_module+0x22/0x1d2 [ 2.790000] [<ffffffff81124fe8>] do_init_module+0x5a/0x1d2 [ 2.790002] [<ffffffff810c96b1>] load_module+0x1e11/0x2580 [ 2.790003] [<ffffffff810c68b0>] ? show_taint+0x30/0x30 [ 2.790004] [<ffffffff81177250>] ? kernel_read_file+0x100/0x190 [ 2.790005] [<ffffffff810c9ffa>] SyS_finit_module+0xba/0xc0 [ 2.790007] [<ffffffff814f13e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [ 2.790008] ---[ end trace c78a74e78baec6fc ]--- So, allocate the structure dynamically. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e1ba4f upstream. If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel OOPS: Bad kernel stack pointer cd93c840 at c000000000009868 Oops: Bad kernel stack pointer, sig: 6 [#1] ... GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840 ... NIP [c000000000009868] resume_kernel+0x2c/0x58 LR [c000000000006208] program_check_common+0x108/0x180 On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does not emulate actual store in emulate_step() because it may corrupt the exception frame. So the kernel does the actual store operation in exception return code i.e. resume_kernel(). resume_kernel() loads the saved stack pointer from memory using lwz, which only loads the low 32-bits of the address, causing the kernel crash. Fix this by loading the 64-bit value instead. Fixes: be96f63 ("powerpc: Split out instruction analysis part of emulate_step()") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> [mpe: Change log massage, add stable tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…te() [ Upstream commit 9ae34db ] This commit moves sparc64's prototype of pmd_write() outside of the CONFIG_TRANSPARENT_HUGEPAGE ifdef. In 2013, commit a7b9403 ("sparc64: Encode huge PMDs using PTE encoding.") exposed a path where pmd_write() could be called without CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below. The diff is awkward to read, but the changes are straightforward. pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE. Also, __HAVE_ARCH_PMD_WRITE was defined. kernel BUG at include/asm-generic/pgtable.h:576! \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1] CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted 4.1.12-61.7.1.el6uek.rc1.sparc64 #1 task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000 TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y: 00000005 Not tainted TPC: <gup_huge_pmd+0x198/0x1e0> g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001 g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720 o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00 o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0 RPC: <gup_huge_pmd+0x190/0x1e0> l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000 l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000 i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000 i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0 I7: <gup_pud_range+0x170/0x1a0> Call Trace: [0000000000460dd0] gup_pud_range+0x170/0x1a0 [0000000000460e84] get_user_pages_fast+0x84/0x120 [00000000006f5a18] iov_iter_get_pages+0x98/0x240 [00000000005fa744] do_direct_IO+0xf64/0x1e00 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4] [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4] [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4] [0000000000553bd4] generic_file_read_iter+0x114/0x140 [00000000005bdc2c] __vfs_read+0xac/0x100 [00000000005bf254] vfs_read+0x54/0x100 [00000000005bf368] SyS_pread64+0x68/0x80 Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 557c44b ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ rockchip-linux#250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d399 ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c70b17b ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 723b929 ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ rockchip-linux#251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP: b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01 ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. Fixes: 6f76a01 ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") Cc: stable@vger.kernel.org # v5.12+ Reported-by: Eddie James <eajames@linux.ibm.com> Tested-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/linuxppc-dev/fdaadc46-7476-9237-e104-1d2168526e72@linux.ibm.com/ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://msgid.link/20231010114750.847794-1-mpe@ellerman.id.au

The cited patch change mlx5 driver so that during probe DMA operations were performed before pci_enable_device(), and during teardown DMA operations were performed after pci_disable_device(). DMA operations require PCI to be enabled. Hence, The above leads to the following oops in PPC systems[1]. On s390x systems, as reported by Niklas Schnelle, this is a problem because mlx5_pci_init() is where the DMA and coherent mask is set but mlx5_cmd_init() already does a dma_alloc_coherent(). Thus a DMA allocation is done during probe before the correct mask is set. This causes probe to fail initialization of the cmdif SW structs on s390x after that is converted to the common dma-iommu code. This is because on s390x DMA addresses below 4 GiB are reserved on current machines and unlike the old s390x specific DMA API implementation common code enforces DMA masks. Fix it by performing the DMA operations during probe after pci_enable_device() and after the dma mask is set, and during teardown before pci_disable_device(). [1] Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 netconsole rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib iw_cm libiscsi scsi_transport_iscsi ib_cm ib_uverbs ib_core mlx5_core(-) ptp pps_core fuse vmx_crypto crc32c_vpmsum [last unloaded: mlx5_ib] CPU: 1 PID: 8937 Comm: modprobe Not tainted 6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02 #1 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c000000000423388 LR: c0000000001e733c CTR: c0000000001e4720 REGS: c0000000055636d0 TRAP: 0380 Not tainted (6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02) MSR: 8000000000009033 CR: 24008884 XER: 20040000 CFAR: c0000000001e7338 IRQMASK: 0 NIP [c000000000423388] __free_pages+0x28/0x160 LR [c0000000001e733c] dma_direct_free+0xac/0x190 Call Trace: [c000000005563970] [5deadbeef0000100] 0x5deadbeef0000100 (unreliable) [c0000000055639b0] [c0000000003d46cc] kfree+0x7c/0x150 [c000000005563a40] [c0000000001e47c8] dma_free_attrs+0xa8/0x1a0 [c000000005563aa0] [c008000000d0064c] mlx5_cmd_cleanup+0xa4/0x100 [mlx5_core] [c000000005563ad0] [c008000000cf629c] mlx5_mdev_uninit+0xf4/0x140 [mlx5_core] [c000000005563b00] [c008000000cf6448] remove_one+0x160/0x1d0 [mlx5_core] [c000000005563b40] [c000000000958540] pci_device_remove+0x60/0x110 [c000000005563b80] [c000000000a35e80] device_remove+0x70/0xd0 [c000000005563bb0] [c000000000a37a38] device_release_driver_internal+0x2a8/0x330 [c000000005563c00] [c000000000a37b8c] driver_detach+0x8c/0x160 [c000000005563c40] [c000000000a35350] bus_remove_driver+0x90/0x110 [c000000005563c80] [c000000000a38948] driver_unregister+0x48/0x90 [c000000005563cf0] [c000000000957e38] pci_unregister_driver+0x38/0x150 [c000000005563d40] [c008000000eb6140] mlx5_cleanup+0x38/0x90 [mlx5_core] Fixes: 06cd555 ("net/mlx5: split mlx5_cmd_init() to probe and reload routines") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from nic profile to uplink representor for example. Similar logic which fixed a similar scenario was previously introduced in the following commit: commit 72cc654 net/mlx5e: Take RTNL lock when needed before calling xdp_set_features(). This fixes the following assertion and warning call trace: RTNL: assertion failed at net/core/dev.c (1961) WARNING: CPU: 13 PID: 2529 at net/core/dev.c:1961 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse CPU: 13 PID: 2529 Comm: devlink Not tainted 6.5.0_for_upstream_min_debug_2023_09_07_20_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 8f ff 80 3d 77 0d 16 01 00 75 c5 ba a9 07 00 00 48 c7 c6 c4 bb 0d 82 48 c7 c7 18 c8 06 82 c6 05 5b 0d 16 01 01 e8 44 f6 8c ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff88819930f7f0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8309f740 RCX: 0000000000000027 RDX: ffff88885fb5b5c8 RSI: 0000000000000001 RDI: ffff88885fb5b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff88819930f810 R13: ffff88810b7fea40 R14: ffff8881154e8fd8 R15: ffff888107e881a0 FS: 00007f3ad248f800(0000) GS:ffff88885fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563b85f164e0 CR3: 0000000113b5c006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_build_rep_params+0x97/0x130 [mlx5_core] mlx5e_init_ul_rep+0x9f/0x100 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_vport_rep_load+0x329/0x4a0 [mlx5_core] mlx5_esw_offloads_rep_load+0x9e/0xf0 [mlx5_core] esw_offloads_enable+0x4bc/0xe90 [mlx5_core] mlx5_eswitch_enable_locked+0x3c8/0x570 [mlx5_core] ? kmalloc_trace+0x25/0x80 mlx5_devlink_eswitch_mode_set+0x224/0x680 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x276/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3ad231340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffd70aad4b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000c36b00 RCX:00007f3ad231340a RDX: 0000000000000038 RSI: 0000000000c36b00 RDI: 0000000000000003 RBP: 0000000000c36910 R08: 00007f3ad2625200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ Fixes: 4d5ab0a ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When testing on risc-v QEMU environment with "crashkernel=" parameter enabled, a problem occurred with the following message: [ 0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB) [ 0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __insert_resource+0x8e/0xd0 [ 0.000000] ra : insert_resource+0x28/0x4e [ 0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0 [ 0.000000] gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00 [ 0.000000] t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0 [ 0.000000] s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380 [ 0.000000] a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000 [ 0.000000] a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078 [ 0.000000] s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880 [ 0.000000] s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f [ 0.000000] s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00 [ 0.000000] t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Failed to add a Crash kernel resource at 177e00000 The crashkernel memory has been allocated successfully, whereas it failed to insert into iomem_resource. This is due to the unique reserving logic in risc-v arch specific code, i.e. crashk_res/crashk_low_res will be added into iomem_resource later in init_resources(), which is not aligned with current unified reserving logic in reserve_crashkernel_{generic,low}() and therefore leads to the failure of crashkernel reservation. Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE in init_resources() to fix above problem. Fixes: 31549153088e ("riscv: kdump: use generic interface to simplify crashkernel reservation") Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com> Link: https://lore.kernel.org/r/20230925024333.730964-1-chenjiahao16@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

On driver load, scsi_add_host() can fail. This triggers the free path to call qla2x00_mem_free() multiple times. This causes NULL pointer access of ha->base_qpair. Add check before access. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] PGD 8000001fcfe4a067 PUD 1fc8f0a067 PMD 0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffffc118f73c>] [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] RSP: 0018:ffff8ace97a93a30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8ace8efd0000 RCX: 000000000000488f RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8ace97a93a60 R08: 000000000001f040 R09: ffffffff8678209b R10: ffff8acf7d6df040 R11: ffffc591c0fcc980 R12: ffffffff87034800 R13: ffff8acf0e3cc740 R14: ffff8ace8efd0000 R15: 00000000fffffff4 FS: 00007f4cf5449740(0000) GS:ffff8acf7d6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000001fc2f6c000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff86781f18>] ? kobject_put+0x28/0x60 [<ffffffffc119a59c>] qla2x00_probe_one+0x19fc/0x3040 [qla2xxx] Fixes: efeda3b ("scsi: qla2xxx: Move resource to allow code reuse") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20231016101749.5059-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

…ress If we specify a valid CQ ring address but an invalid SQ ring address, we'll correctly spot this and free the allocated pages and clear them to NULL. However, we don't clear the ring page count, and hence will attempt to free the pages again. We've already cleared the address of the page array when freeing them, but we don't check for that. This causes the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Oops [#1] Modules linked in: CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty rockchip-linux#56 Hardware name: ucbbar,riscvemu-bare (DT) Workqueue: events_unbound io_ring_exit_work epc : io_pages_free+0x2a/0x58 ra : io_rings_free+0x3a/0x50 epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0 status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d [<ffffffff808811a2>] io_pages_free+0x2a/0x58 [<ffffffff80881406>] io_rings_free+0x3a/0x50 [<ffffffff80882176>] io_ring_exit_work+0x37e/0x424 [<ffffffff80027234>] process_one_work+0x10c/0x1f4 [<ffffffff8002756e>] worker_thread+0x252/0x31c [<ffffffff8002f5e4>] kthread+0xc4/0xe0 [<ffffffff8000332a>] ret_from_fork+0xa/0x1c Check for a NULL array in io_pages_free(), but also clear the page counts when we free them to be on the safer side. Reported-by: rtm@csail.mit.edu Fixes: 03d89a2 ("io_uring: support for user allocated memory for rings/sqes") Cc: stable@vger.kernel.org Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

As &dev->condlock is acquired under irq context along the following call chain from s5p_mfc_irq(), other acquisition of the same lock inside process context or softirq context should disable irq avoid double lock. enc_post_frame_start() seems to be one such function that execute under process context or softirq context. <deadlock #1> enc_post_frame_start() --> clear_work_bit() --> spin_loc(&dev->condlock) <interrupt> --> s5p_mfc_irq() --> s5p_mfc_handle_frame() --> clear_work_bit() --> spin_lock(&dev->condlock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch change clear_work_bit() inside enc_post_frame_start() to clear_work_bit_irqsave(). Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f4f8a78 ] The opt_num field is controlled by user mode and is not currently validated inside the kernel. An attacker can take advantage of this to trigger an OOB read and potentially leak information. BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 Read of size 2 at addr ffff88804bc64272 by task poc/6431 CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1 Call Trace: nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281 nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47 expr_call_ops_eval net/netfilter/nf_tables_core.c:214 nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264 nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23 [..] Also add validation to genre, subtype and version fields. Bug: 304913642 Fixes: 11eeef4 ("netfilter: passive OS fingerprint xtables match") Reported-by: Lucas Leong <wmliang@infosec.exchange> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 7bb8d52) Signed-off-by: Lee Jones <joneslee@google.com> Change-Id: If79c79e3f55de8c81b70c19661cb0084b02c3da2

…erride commit 6c2f421 upstream. Several core drivers and buses expect that driver_override is a dynamically allocated memory thus later they can kfree() it. However such assumption is not documented, there were in the past and there are already users setting it to a string literal. This leads to kfree() of static memory during device release (e.g. in error paths or during unbind): kernel BUG at ../mm/slub.c:3960! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kfree) from [<c058da50>] (platform_device_release+0x88/0xb4) (platform_device_release) from [<c0585be0>] (device_release+0x2c/0x90) (device_release) from [<c0a69050>] (kobject_put+0xec/0x20c) (kobject_put) from [<c0f2f120>] (exynos5_clk_probe+0x154/0x18c) (exynos5_clk_probe) from [<c058de70>] (platform_drv_probe+0x6c/0xa4) (platform_drv_probe) from [<c058b7ac>] (really_probe+0x280/0x414) (really_probe) from [<c058baf4>] (driver_probe_device+0x78/0x1c4) (driver_probe_device) from [<c0589854>] (bus_for_each_drv+0x74/0xb8) (bus_for_each_drv) from [<c058b48c>] (__device_attach+0xd4/0x16c) (__device_attach) from [<c058a638>] (bus_probe_device+0x88/0x90) (bus_probe_device) from [<c05871fc>] (device_add+0x3dc/0x62c) (device_add) from [<c075ff10>] (of_platform_device_create_pdata+0x94/0xbc) (of_platform_device_create_pdata) from [<c07600ec>] (of_platform_bus_create+0x1a8/0x4fc) (of_platform_bus_create) from [<c0760150>] (of_platform_bus_create+0x20c/0x4fc) (of_platform_bus_create) from [<c07605f0>] (of_platform_populate+0x84/0x118) (of_platform_populate) from [<c0f3c964>] (of_platform_default_populate_init+0xa0/0xb8) (of_platform_default_populate_init) from [<c01031f8>] (do_one_initcall+0x8c/0x404) Provide a helper which clearly documents the usage of driver_override. This will allow later to reuse the helper and reduce the amount of duplicated code. Convert the platform driver to use a new helper and make the driver_override field const char (it is not modified by the core). Bug: 95334746 Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220419113435.246203-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 389190b) Signed-off-by: Lee Jones <joneslee@google.com> Change-Id: I1ef85ee1f3828e947adec4a45363d8434876aade

…del video info list_del corruption, ffffffc028662d18->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: 8822es(O) sprdbt_tty Process CtrlThread (pid: 3697, stack limit = 0x0000000060d302a5) CPU: 1 PID: 3697 Comm: CtrlThread Tainted: G O 4.19.232 rockchip-linux#96 Hardware name: Rockchip RK3528 DEMO4 DDR4 V10 Board (DT) pstate: 40400005 (nZcv daif +PAN -UAO) pc : __list_del_entry_valid+0x64/0xb0 lr : __list_del_entry_valid+0x64/0xb0 sp : ffffff800fd1bc70 x29: ffffff800fd1bc70 x28: ffffffc05c468000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000046000000 x24: 0000000000000011 x23: ffffff800fd1be60 x22: ffffff80098188a0 x21: ffffff8009818000 x20: ffffffc0462af700 x19: ffffffc028662d00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff800934a980 x14: 4f53494f505f5453 x13: 494c207369207478 x12: 656e3e2d38316432 x11: 3636383230636666 x10: 66666666202c6e6f x9 : 6974707572726f63 x8 : 3030303030303030 x7 : 0000000000000058 x6 : ffffffc07f74aa18 x5 : ffffffc07f74aa18 x4 : 0000000000000000 x3 : ffffffc07f753908 x2 : ac674fb1e4701200 x1 : 0000000000000000 x0 : 000000000000004e Call trace: __list_del_entry_valid+0x64/0xb0 rockchip_update_system_status+0x168/0x250 status_store+0x1c/0x38 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x58 kernfs_fop_write+0xf4/0x220 __vfs_write+0x34/0x158 vfs_write+0xb0/0x1d0 ksys_write+0x64/0xe0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.0+0x64/0x178 el0_svc_compat_handler+0x18/0x20 el0_svc_compat+0x8/0x34 Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Change-Id: I42e9c42d7e65c742226f82b9367466b2ed86550d

There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff889edc155c [ 9436.262227][ C4] x1 : ffffff8001005200 x0 : ffffff80444f0428 [ 9436.262232][ C4] Call trace: [ 9436.262236][ C4] expire_timers+0x9c/0x438 [ 9436.262240][ C4] __run_timers+0x1f0/0x330 [ 9436.262245][ C4] run_timer_softirq+0x28/0x58 [ 9436.262255][ C4] efi_header_end+0x168/0x5ec [ 9436.262265][ C4] __irq_exit_rcu+0x108/0x124 [ 9436.262274][ C4] __handle_domain_irq+0x118/0x1e4 [ 9436.262282][ C4] gic_handle_irq.30369+0x6c/0x2bc [ 9436.262286][ C4] el0_irq_naked+0x60/0x6c Bug: 317188938 Change-Id: I9a22325f6abbf28217c8f37b093cf77509b0139a Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/ Reported-by: Joyyoung Huang <huangzaiyang@oppo.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> (cherry picked from commit aed5ed5 https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git devfreq-next) Signed-off-by: Srinivasarao Pathipati <quic_c_spathi@quicinc.com>

fix kcontrol mute case crash, tested by `dumpsys car_service inject-vhal-event 289475072 1,0`. [ 136.260357][ T632] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 136.262328][ T632] Mem abort info: [ 136.264924][ T632] ESR = 0x96000005 [ 136.265362][ T632] EC = 0x25: DABT (current EL), IL = 32 bits [ 136.266072][ T632] SET = 0, FnV = 0 [ 136.266406][ T632] EA = 0, S1PTW = 0 [ 136.266772][ T632] Data abort info: [ 136.267094][ T632] ISV = 0, ISS = 0x00000005 [ 136.267518][ T632] CM = 0, WnR = 0 [ 136.267853][ T632] user pgtable: 4k pages, 39-bit VAs, pgdp=000000012871b000 [ 136.268492][ T632] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 136.269342][ T632] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 136.269899][ T632] Modules linked in: ahci_platform libahci_platform himax_mmi ohci_platform ili210x ohci_hcd [ 136.270788][ T632] CPU: 2 PID: 632 Comm: android.hardwar Not tainted 5.10.198 rockchip-linux#46 [ 136.271453][ T632] Hardware name: Rockchip RK3588 VEHICLE EVB V22 Board (DT) [ 136.272077][ T632] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 136.272673][ T632] pc : spi_codec_ext_ch_mute_put+0x14/0x40 [ 136.273178][ T632] lr : snd_ctl_elem_write+0x128/0x16c [ 136.273636][ T632] sp : ffffffc00e44bc10 [ 136.273987][ T632] x29: ffffffc00e44bc10 x28: ffffff811e293900 [ 136.274514][ T632] x27: 0000000000000000 x26: 0000000000000000 [ 136.275040][ T632] x25: 0000000000000000 x24: ffffff81006024a0 [ 136.275566][ T632] x23: ffffff8100602000 x22: 00000000c4c85513 [ 136.276092][ T632] x21: ffffff8110838b00 x20: ffffff811cf0f000 [ 136.276618][ T632] x19: ffffff8100602000 x18: ffffffc00dc45040 [ 136.277144][ T632] x17: 0000000020000000 x16: 0000000000000001 [ 136.277669][ T632] x15: 0000000000000000 x14: 000000020000001a [ 136.278195][ T632] x13: 754d206b63616279 x12: 0000000000000000 [ 136.278722][ T632] x11: 0000000000006574 x10: 0000000000000000 [ 136.279249][ T632] x9 : 0000000000000004 x8 : ffffff81038eb000 [ 136.279781][ T632] x7 : 0000000000000000 x6 : ffffff811cf0f4c8 [ 136.280311][ T632] x5 : ffffff811cf0f4c8 x4 : 0000000000000000 [ 136.280840][ T632] x3 : 0000000000000000 x2 : ffffff811cf0f000 [ 136.281367][ T632] x1 : ffffff811cf0f000 x0 : ffffff8107260c00 [ 136.281894][ T632] Call trace: [ 136.282184][ T632] spi_codec_ext_ch_mute_put+0x14/0x40 [ 136.282655][ T632] snd_ctl_elem_write+0x128/0x16c [ 136.283083][ T632] snd_ctl_ioctl+0x7dc/0xb48 [ 136.283479][ T632] __arm64_sys_ioctl+0x90/0xc8 [ 136.283888][ T632] el0_svc_common+0xac/0x1ac [ 136.284283][ T632] do_el0_svc+0x1c/0x28 [ 136.284637][ T632] el0_svc+0x10/0x1c [ 136.284968][ T632] el0_sync_handler+0x68/0xac [ 136.285374][ T632] el0_sync+0x164/0x180 Change-Id: I35ec1fb0974b8dd9b58bd6d8b2b362a414cb4cd7 Signed-off-by: Zheng Zhiqi <looper.zheng@rock-chips.com>

[ Upstream commit d5dba32 ] As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f99cd56 ] syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty rockchip-linux#135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> <SEQ=100><CTL=SYN> ... 3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT 4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED 5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack // TCP A: <SND.UNA=101> 8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2dcf5fd upstream. For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: <stable@kernel.org> # 6.4 Fixes: 93cdf49 ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3a42709 ] Validate @ioctl_rsp->OutputOffset and @ioctl_rsp->OutputCount so that their sum does not wrap to a number that is smaller than @reparse_buf and we end up with a wild pointer as follows: BUG: unable to handle page fault for address: ffff88809c5cd45f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 1260 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_query_reparse_point+0x3e0/0x4c0 [cifs] Code: ff ff e8 f3 51 fe ff 41 89 c6 58 5a 45 85 f6 0f 85 14 fe ff ff 49 8b 57 48 8b 42 60 44 8b 42 64 42 8d 0c 00 49 39 4f 50 72 40 <8b> 04 02 48 8b 9d f0 fe ff ff 49 8b 57 50 89 03 48 8b 9d e8 fe ff RSP: 0018:ffffc90000347a90 EFLAGS: 00010212 RAX: 000000008000001f RBX: ffff88800ae11000 RCX: 00000000000000ec RDX: ffff88801c5cd440 RSI: 0000000000000000 RDI: ffffffff82004aa4 RBP: ffffc90000347bb0 R08: 00000000800000cd R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000024 R12: ffff8880114d4100 R13: ffff8880114d4198 R14: 0000000000000000 R15: ffff8880114d4000 FS: 00007f02c07babc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88809c5cd45f CR3: 0000000011750000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? smb2_query_reparse_point+0x3e0/0x4c0 [cifs] cifs_get_fattr+0x16e/0xa50 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 cifs_root_iget+0x163/0x5f0 [cifs] cifs_smb3_do_mount+0x5bd/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f02c08d5b1e Fixes: 2e4564b ("smb3: add support for stat of WSL reparse points for special file types") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1469417 ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

@len

[ Upstream commit 90d025c ] If server replied SMB2_NEGOTIATE with a zero SecurityBufferOffset, smb2_get_data_area() sets @len to non-zero but return NULL, so decode_negTokeninit() ends up being called with a NULL @security_blob: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 871 Comm: mount.cifs Not tainted 6.7.0-rc4 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:asn1_ber_decoder+0x173/0xc80 Code: 01 4c 39 2c 24 75 09 45 84 c9 0f 85 2f 03 00 00 48 8b 14 24 4c 29 ea 48 83 fa 01 0f 86 1e 07 00 00 48 8b 74 24 28 4d 8d 5d 01 <42> 0f b6 3c 2e 89 fa 40 88 7c 24 5c f7 d2 83 e2 1f 0f 84 3d 07 00 RSP: 0018:ffffc9000063f950 EFLAGS: 00010202 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 000000000000004a RDX: 000000000000004a RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000004d R15: 0000000000000000 FS: 00007fce52b0fbc0(0000) GS:ffff88806ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001ae64000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? __stack_depot_save+0x1e6/0x480 ? exc_page_fault+0x6f/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? asn1_ber_decoder+0x173/0xc80 ? check_object+0x40/0x340 decode_negTokenInit+0x1e/0x30 [cifs] SMB2_negotiate+0xc99/0x17c0 [cifs] ? smb2_negotiate+0x46/0x60 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 smb2_negotiate+0x46/0x60 [cifs] cifs_negotiate_protocol+0xae/0x130 [cifs] cifs_get_smb_ses+0x517/0x1040 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_delayed_work_on+0x5d/0x90 cifs_mount_get_session+0x78/0x200 [cifs] dfs_mount_share+0x13a/0x9f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0xbf/0x2b0 ? find_nls+0x16/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fce52c2ab1e Fix this by setting @len to zero when @off == 0 so callers won't attempt to dereference non-existing data areas. Reported-by: Robert Morris <rtm@csail.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…te_call_indirect commit f5d03da upstream. kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate indirect calls. However, int3_emulate_call always assumes the size of the call to be 5 bytes when calculating the return address. This is incorrect for register-based indirect calls in x86, which can be either 2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime, the incorrect return address causes control flow to land onto the wrong place after return -- possibly not a valid instruction boundary. This can lead to a panic like the following: [ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8 [ 7.308883][ C1] #PF: supervisor read access in kernel mode [ 7.309168][ C1] #PF: error_code(0x0000) - not-present page [ 7.309461][ C1] PGD 0 P4D 0 [ 7.309652][ C1] Oops: 0000 [#1] SMP [ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6 [ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.316948][ C1] Call Trace: [ 7.317123][ C1] <IRQ> [ 7.317279][ C1] ? __die_body+0x64/0xb0 [ 7.317482][ C1] ? page_fault_oops+0x248/0x370 [ 7.317712][ C1] ? __wake_up+0x96/0xb0 [ 7.317964][ C1] ? exc_page_fault+0x62/0x130 [ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30 [ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10 [ 7.318860][ C1] ? default_idle+0xb/0x10 [ 7.319063][ C1] ? __common_interrupt+0x52/0xc0 [ 7.319330][ C1] common_interrupt+0x78/0x90 [ 7.319546][ C1] </IRQ> [ 7.319679][ C1] <TASK> [ 7.319854][ C1] asm_common_interrupt+0x22/0x40 [ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10 [ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9 [ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256 [ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c [ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c [ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2 [ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000 [ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000 [ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10 [ 7.324239][ C1] default_idle_call+0x31/0x50 [ 7.324464][ C1] do_idle+0xd3/0x240 [ 7.324690][ C1] cpu_startup_entry+0x25/0x30 [ 7.324983][ C1] start_secondary+0xb4/0xc0 [ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b [ 7.325498][ C1] </TASK> [ 7.325641][ C1] Modules linked in: [ 7.325906][ C1] CR2: 000000000002b4d8 [ 7.326104][ C1] ---[ end trace 0000000000000000 ]--- [ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0 [ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3 [ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046 [ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001 [ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4 [ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482 [ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023 [ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000 [ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 [ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0 [ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt [ 7.332730][ C1] Kernel Offset: disabled [ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- The relevant assembly code is (from objdump, faulting address highlighted): ffffffff8102ed9d: 41 ff d3 call *%r11 ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax The emulation incorrectly sets the return address to be ffffffff8102ed9d + 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next mov. This in turn causes incorrect subsequent instruction decoding and eventually triggers the page fault above. Instead of invoking int3_emulate_call, perform push and jmp emulation directly in kprobe_emulate_call_indirect. At this point we can obtain the instruction size from p->ainsn.size so that we can calculate the correct return address. Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/ Fixes: 6256e66 ("x86/kprobes: Use int3 instead of debug trap for single-step") Cc: stable@vger.kernel.org Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b684c09 upstream. ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com Cc: stable@vger.kernel.org Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0e8d244 ] If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. Fixes: f88814c ("efi/efivars: Expose RT service availability via efivars abstraction") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 55a8210 ] When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org). Fixes: 04dc715 ("apparmor: audit policy ns specified in policy load") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6d6eeab ] Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: <TASK> __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261 ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Currently, there are various global init exit issues encountered on Andriod/linux system. It's hard to debug these issues on product environment without a usable coredump. For example, it's hard to get the root cause why global init task exited from the below kmsg: [ 4.696032][T400001] e2fsck: /dev/block/by-name/metadata: clean, 35/8192 files, 2083/8192 blocks [ 4.696783][T500326] [bq27z561] fg_debug_dump_regs: slave_dump:Reg[0x0073] = 0x05C5 [ 4.700583][T400001] EXT4-fs (sdc17): mounted filesystem with ordered data mode. Opts: discard [ 4.706445][T400001] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f0000 [ 4.706459][T400001] CPU: 4 PID: 1 Comm: init Tainted: G S W 5.10.136-android12-9-00005-gf9a66cbe7091-ab9177899 #1 [ 4.706464][T400001] Hardware name: MT6983Z/TCZA (DT) [ 4.706469][T400001] Call trace: [ 4.706482][T400001] dump_backtrace.cfi_jt+0x0/0x8 [ 4.706493][T400001] dump_stack_lvl+0xc4/0x140 [ 4.706504][T400001] panic+0x178/0x464 [ 4.706511][T400001] do_exit+0xb30/0xf9c [ 4.706517][T400001] do_group_exit+0x130/0x1c8 [ 4.706523][T400001] do_group_exit+0x0/0x1c8 [ 4.706529][T400001] __do_sys_exit_group+0x0/0x18 [ 4.706535][T400001] __se_sys_exit_group+0x0/0x14 [ 4.706543][T400001] el0_svc_common+0xd4/0x270 [ 4.706551][T400001] el0_svc+0x28/0x88 [ 4.706559][T400001] el0_sync_handler+0x8c/0xf0 [ 4.706567][T400001] el0_sync+0x1b4/0x1c0 Add hook for task exiting routine, while will be helpful for OEMs to get the reason of any exiting task to be noticed such as dump last exit thread executable sections and registers info. Bug: 324013972 Link: https://lore.kernel.org/lkml/20231110032043.34516-1-qiwu.chen@transsion.com/T/ Change-Id: Ibb7c9012af18b99a1bb458d236f166e6450241c3 Signed-off-by: qiwu.chen <qiwu.chen@transsion.com>

… error rockchip_canfd_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but rockchip_canfd_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 82.432581][ T2211] CPU: 3 PID: 2211 Comm: cansend Tainted: G E 6.1.57-android14-11-gfc4b04d84027-ab11318753 #1 [ 82.433595][ T2211] Hardware name: Rockchip RK3568 EVB1 DDR4 V10 Board (DT) [ 82.434206][ T2211] pstate: 30400005 (nzCV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 82.434887][ T2211] pc : dev_hard_start_xmit+0xd0/0x260 [ 82.435367][ T2211] lr : sch_direct_xmit+0xf0/0x3d0 [ 82.435815][ T2211] sp : ffffffc0110f3a70 [ 82.436175][ T2211] x29: ffffffc0110f3a80 x28: ffffffc009f47000 x27: ffffff800d078080 [ 82.436873][ T2211] x26: ffffffc009f2ed80 x25: ffffffc009f50550 x24: 0000000000000010 [ 82.437567][ T2211] x23: ffffff807bfefc00 x22: ffffff800d078000 x21: ffffff81f41b7200 [ 82.438261][ T2211] x20: 0000000000000000 x19: ffffffc0110f3ae4 x18: ffffffc01075d070 [ 82.438954][ T2211] x17: 0000000044e57e43 x16: 00000000ab1f26f7 x15: 0000007fec6a51b0 [ 82.439646][ T2211] x14: 0000000000000001 x13: 0000000008000000 x12: fffffffdeff6a120 [ 82.440340][ T2211] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffff81f9bf5d80 [ 82.441033][ T2211] x8 : ffffffc00262b620 x7 : 7f7f7f7f7f7f7f7f x6 : fefefefefefefeff [ 82.441726][ T2211] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffffffc0110f3ae4 [ 82.442418][ T2211] x2 : ffffff81f41b7200 x1 : ffffff800d078000 x0 : ffffff807bfefc00 [ 82.443111][ T2211] Call trace: [ 82.443393][ T2211] dev_hard_start_xmit+0xd0/0x260 [ 82.443839][ T2211] sch_direct_xmit+0xf0/0x3d0 [ 82.444247][ T2211] __dev_queue_xmit+0x5f0/0xd40 [ 82.444667][ T2211] can_send+0x22c/0x2b0 [can] [ 82.445098][ T2211] raw_sendmsg+0x1b4/0x3ac [can_raw] [ 82.445585][ T2211] sock_write_iter+0xdc/0x13c [ 82.445997][ T2211] vfs_write+0x1e0/0x2c8 [ 82.446375][ T2211] ksys_write+0x78/0xe8 [ 82.446737][ T2211] __arm64_sys_write+0x1c/0x2c [ 82.447157][ T2211] invoke_syscall+0x58/0x11c [ 82.447557][ T2211] el0_svc_common+0xb4/0xf4 [ 82.447954][ T2211] do_el0_svc+0x2c/0xb0 [ 82.448316][ T2211] el0_svc+0x2c/0xa4 [ 82.448661][ T2211] el0t_64_sync_handler+0x68/0xb4 [ 82.449102][ T2211] el0t_64_sync+0x1a4/0x1a8 [ 82.449504][ T2211] Code: 728fc871 72a89cb1 6b11021f 54000040 (d4304500) [ 82.450106][ T2211] ---[ end trace 0000000000000000 ]--- [ 82.468041][ T2211] Kernel panic - not syncing: Oops - CFI: Fatal exception in interrupt [ 82.468776][ T2211] SMP: stopping secondary CPUs [ 82.469267][ T2211] Kernel Offset: disabled [ 82.469643][ T2211] CPU features: 0x00,00040000,00040184,6600721b [ 82.470190][ T2211] Memory Limit: none [ 82.470530][ T2211] PMU CRU: Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Change-Id: I62fa546e07984c7fd6acbd0bdf1278414b479829

…plug <3>[ 2169.596144][ T63] INFO: task irq/132-maxim4c:200 blocked for more than 720 seconds. <3>[ 2169.596172][ T63] Not tainted 5.10.160-abibuild_20240531.213136 #1 <3>[ 2169.596183][ T63] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 2169.596225][ T63] task:irq/132-maxim4c state:D stack: 0 pid: 200 ppid: 2 flags:0x00000008 <6>[ 2169.596243][ T63] Call trace: <6>[ 2169.596254][ T63] __switch_to+0x118/0x148 <6>[ 2169.596266][ T63] __schedule+0x4ac/0x6f0 <6>[ 2169.596277][ T63] schedule+0xa4/0xe8 <6>[ 2169.596287][ T63] schedule_preempt_disabled+0x2c/0x48 <6>[ 2169.596297][ T63] __mutex_lock+0x364/0x584 <6>[ 2169.596306][ T63] __mutex_lock_slowpath+0x1c/0x28 <6>[ 2169.596316][ T63] mutex_lock+0x44/0x68 <6>[ 2169.596327][ T63] maxim4c_hot_plug_detect_irq_handler+0x30/0xa4 <6>[ 2169.596337][ T63] irq_thread_fn+0x38/0x84 <6>[ 2169.596346][ T63] irq_thread+0x1c4/0x264 <6>[ 2169.596356][ T63] kthread+0x140/0x36c <6>[ 2169.596366][ T63] ret_from_fork+0x10/0x18 <3>[ 2169.596566][ T63] INFO: task kworker/u16:8:842 blocked for more than 720 seconds. <3>[ 2169.596577][ T63] Not tainted 5.10.160-abibuild_20240531.213136 #1 <3>[ 2169.596586][ T63] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. <6>[ 2169.596619][ T63] task:kworker/u16:8 state:D stack: 0 pid: 842 ppid: 2 flags:0x00000028 <6>[ 2169.596638][ T63] Workqueue: maxim4c work queue maxim4c_hot_plug_state_check_work <6>[ 2169.596651][ T63] Call trace: <6>[ 2169.596661][ T63] __switch_to+0x118/0x148 <6>[ 2169.596671][ T63] __schedule+0x4ac/0x6f0 <6>[ 2169.596681][ T63] schedule+0xa4/0xe8 <6>[ 2169.596691][ T63] synchronize_irq+0x7c/0xb8 <6>[ 2169.596701][ T63] disable_irq+0x78/0xa4 <6>[ 2169.596711][ T63] maxim4c_hot_plug_state_check_work+0x324/0x394 <6>[ 2169.596722][ T63] process_one_work+0x1f8/0x480 <6>[ 2169.596731][ T63] worker_thread+0x278/0x4d4 <6>[ 2169.596741][ T63] kthread+0x140/0x36c <6>[ 2169.596759][ T63] ret_from_fork+0x10/0x18 Signed-off-by: Cai Wenzhong <cwz@rock-chips.com> Change-Id: I9ca122e3c09a55b8a024e50da9ea2e3d176e72e0

Example: RK3588 Use I2S2_2CH as Clk-Gen to serve TDM_MULTI_LANES I2S2_2CH ----> BCLK,I2S_LRCK --------> I2S0_8CH_TX (Slave TRCM-TXONLY) | |--------> BCLK,TDM_SYNC --------> TDM Device (Slave) Note: I2S2_2CH_MCLK: BCLK I2S2_2CH_SCLK: I2S_LRCK (GPIO2_B7) I2S2_2CH_LRCK: TDM_SYNC (GPIO2_C0) DT: &i2s0_8ch { status = "okay"; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S0_8CH_TX>; i2s-lrck-gpio = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; tdm-fsync-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; rockchip,tdm-multi-lanes; rockchip,tdm-tx-lanes = <2>; //e.g. TDM16 x 2 rockchip,tdm-rx-lanes = <2>; //e.g. TDM16 x 2 rockchip,clk-src = <&i2s2_2ch>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_lrck &i2s0_sclk &i2s0_sdi0 &i2s0_sdi1 &i2s0_sdo0 &i2s0_sdo1>; }; &i2s2_2ch { status = "okay"; assigned-clocks = <&cru I2S2_2CH_MCLKOUT>; assigned-clock-parents = <&cru MCLK_I2S2_2CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s2m0_mclk &i2s2m0_lrck &i2s2m0_sclk>; }; Usage: TDM16 x 2 Playback amixer contents numid=3,iface=MIXER,name='Receive SDIx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item #1 'SDIx1' ; Item #2 'SDIx2' ; Item #3 'SDIx3' ; Item #4 'SDIx4' : values=0 numid=2,iface=MIXER,name='Transmit SDOx Select' ; type=ENUMERATED,access=rw------,values=1,items=5 ; Item #0 'Auto' ; Item #1 'SDOx1' ; Item #2 'SDOx2' ; Item #3 'SDOx3' ; Item #4 'SDOx4' : values=0 /# amixer sset "Transmit SDOx Select" "SDOx2" Simple mixer control 'Transmit SDOx Select',0 Capabilities: enum Items: 'Auto' 'SDOx1' 'SDOx2' 'SDOx3' 'SDOx4' Item0: 'SDOx2' /# aplay -D hw:0,0 --period-size=1024 --buffer-size=4096 -r 48000 \ -c 32 -f s32_le /dev/zero Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Change-Id: I6996e05c73a9d68bbeb9562eb6e68e4c99b52d85

This patch add support for DMA-based digital loopback. BACKGROUND Audio Products with AEC require loopback for echo cancellation. the hardware LP is not always available on some products, maybe the HW limitation(such as internal acodec) or HW Cost-down. This patch add support software DLP for such products. Enable: CONFIG_SND_SOC_ROCKCHIP_DLP &i2s { rockchip,digital-loopback; }; Mode List: amixer contents numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=0 Testenv: wired SDO0 --> SDI0 directly to get external digital loopback as reference. Testcase: dlp.sh /#!/bin/sh item=0 id=`amixer contents | grep "Software Digital Loopback" | \ awk -F ',' '{print $1}'` items=`amixer contents | grep -A 1 "Software Digital Loopback" | \ grep items | awk -F 'items=' '{print $2}'` echo "Software Digital Loopback: $id, items: $items" mode_chs() { case $1 in [0-4]) echo "2" ;; [5-6]) echo "4" ;; *) echo "2" ;; esac } while true do ch=`mode_chs $item` amixer -c 0 cset $id $item arecord -D hw:0,0 --period-size=1024 --buffer-size=4096 -r 48000 -c $ch -f s16_le \ -d 15 sine/dlp_$item.wav & sleep 2 for i in $(seq 1 10) do aplay -D hw:0,0 --period-size=1024 --buffer-size=8192 $((ch))ch.wav -d 1 done pid=$(ps | egrep "aplay|arecord" | grep -v grep | awk '{print $1}' | sort -r) for p in $pid do wait $p 2>/dev/null done item=$((item+1)) if [ $item -ge $items ]; then sleep 1 break fi done echo "Done" Result: do shell test and verify dlp_x.wav: * Alignment: ~1 samples shift (loopback <-> mics). * Integrity: no giltch, no data lost. * AEC: align loopback and mics sample and do simple AEC, get clean waveform. Logs: ... numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=2 Recording WAVE 'sine/dlp_2.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Playing WAVE '2ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo ... numid=2,iface=MIXER,name='Software Digital Loopback Mode' ; type=ENUMERATED,access=rw------,values=1,items=7 ; Item #0 'Disabled' ; Item #1 '2CH: 1 Loopback + 1 Mic' ; Item #2 '2CH: 1 Mic + 1 Loopback' ; Item #3 '2CH: 1 Mic + 1 Loopback-mixed' ; Item #4 '2CH: 2 Loopbacks' ; Item #5 '4CH: 2 Mics + 2 Loopbacks' ; Item #6 '4CH: 2 Mics + 1 Loopback-mixed' : values=6 Recording WAVE 'sine/dlp_6.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Playing WAVE '4ch.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Channels 4 Done Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Change-Id: I5772f0694f7a14a0f0bd1f0777b6c4cdbd781a64

…del video info list_del corruption, ffffffc028662d18->next is LIST_POISON1 (dead000000000100) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:47! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: 8822es(O) sprdbt_tty Process CtrlThread (pid: 3697, stack limit = 0x0000000060d302a5) CPU: 1 PID: 3697 Comm: CtrlThread Tainted: G O 4.19.232 rockchip-linux#96 Hardware name: Rockchip RK3528 DEMO4 DDR4 V10 Board (DT) pstate: 40400005 (nZcv daif +PAN -UAO) pc : __list_del_entry_valid+0x64/0xb0 lr : __list_del_entry_valid+0x64/0xb0 sp : ffffff800fd1bc70 x29: ffffff800fd1bc70 x28: ffffffc05c468000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000046000000 x24: 0000000000000011 x23: ffffff800fd1be60 x22: ffffff80098188a0 x21: ffffff8009818000 x20: ffffffc0462af700 x19: ffffffc028662d00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffffff800934a980 x14: 4f53494f505f5453 x13: 494c207369207478 x12: 656e3e2d38316432 x11: 3636383230636666 x10: 66666666202c6e6f x9 : 6974707572726f63 x8 : 3030303030303030 x7 : 0000000000000058 x6 : ffffffc07f74aa18 x5 : ffffffc07f74aa18 x4 : 0000000000000000 x3 : ffffffc07f753908 x2 : ac674fb1e4701200 x1 : 0000000000000000 x0 : 000000000000004e Call trace: __list_del_entry_valid+0x64/0xb0 rockchip_update_system_status+0x168/0x250 status_store+0x1c/0x38 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x58 kernfs_fop_write+0xf4/0x220 __vfs_write+0x34/0x158 vfs_write+0xb0/0x1d0 ksys_write+0x64/0xe0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.0+0x64/0x178 el0_svc_compat_handler+0x18/0x20 el0_svc_compat+0x8/0x34 Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Change-Id: I42e9c42d7e65c742226f82b9367466b2ed86550d

drm : allow framebuffer and videomodes not to have same size

c243e9a

DRM legacy doesn't allow that, will be only available with drm atomic. Although, when running 4K modes, it's preferable to get a 1080p frambuffer that can be handlded properly by GPU and then use VOP to upscale that to 4K.

Kwiboo merged commit ee359b4 into Kwiboo:tinkerboard-4.4 Apr 25, 2017

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

drm : allow framebuffer and videomodes not to have same size #1

drm : allow framebuffer and videomodes not to have same size #1

LongChair commented Apr 24, 2017

drm : allow framebuffer and videomodes not to have same size #1

drm : allow framebuffer and videomodes not to have same size #1

Conversation

LongChair commented Apr 24, 2017