AMBER B1‐‐V1 version hardware quickstart

##ASSEMBLY INSTRUCTIONS

***Master system default username is amber, the password is a or amber.

① Install AMBER-B1 on a fixed stand, as shown in Figure 1.

Figure 1

② Connect cable 1-1 to port 1 of the robotic arm,and connect cable 3-1 to port 2, as shown in Figure 2.

Figure 2

③Connect cable 1-2 to any ports of power supplies 1, 2, 3, and connect cable 1-3 to any ports of power supplies 4, 5, 6, as shown in Figure 3.

④Connect cable 2-1 to port 7 of power supply, connect cable 2-2 to port 8 of power supply, and connect cable 2-3 to port 9 of power supply, as shown in Figure 3.

Figure 3

⑤Connect cable 3-2 to the 6-PIN port on the rear of the X-hub，connect cable 6-2 to the 2-PIN port on the rear of the X-hub, as shown in Figure 4.

Figure 4

⑥Connect cable 7-2 to the LAN port on the X-hub，MUST this LAN port as shown in Figure 5.

––––

Figure 5

⑦Connect cable 4-1 to the port of HDMI on the rear of X-hub, connect cable 7-1 to LAN2 port on the rear of X-hub, connect cable 8 to the POWER port on the rear of the X-hub, as shown in Figure 6.

Figure 6

⑧Connect cable 5-1 & 6-1 to USB port of the Master, as shown in Figure 7.

Figure 7

⑨Install the screen bracket into the groove on the rear side of the screen, as shown in Figure 8.

Figure 8

⑩Connect cable 4-2 to the HD jack on the right side of the screen, and connect cable 5-2 to the POWER jack on the right side of the screen, as shown in Figure 9.

Figure 9

⑪Power on and enjoy your Amber B1!