Initial Configuration

You've successfully uploaded the Sonoff-Tasmota firmware to your module.

1. Connect to (AC) power (Serial NOT connected)
2. If your WiFi was not set prior compile as described in Upload section, configure Wifi by using one of the provided configuration modes: Button Usage or use WPS if your router supports it.
3. Connect to the device webpage (http://[sonoff-ip]/cn) NOTE: Replace [sonoff-ip] with actual IP address of your Sonoff device.
4. Select the correct Sonoff module type from the configuration frontend
5. Configure the MQTT broker connection, choose a unique topic, e.g. "sonoff-kitchenlight"
6. Test communication with the MQTT client of your choice
7. Integrate with the Control interface or home automation solution of your choice