Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Improvement on Exynos4x12 DVFS Hotplug driver #20

Merged
merged 1 commit into from
Apr 23, 2013

Conversation

ggezer
Copy link

@ggezer ggezer commented Apr 22, 2013

This commit finishes the TODOs I mentioned in initial commit.

  • anticipation behavior is improved. Instead of increasing target limit for closing cpu, check interval is increased and target limit for booting cpu is decreased. Thus less timer tick -> better overall system performance
  • hotplug ticks used in ondemand and conservative governors are now disabled when not needed(system is idle, system is under heavy load). Thus significantly improved overall system power consumption.
  • tunables are exported to sysfs under /sys/devices/system/cpu/dvfs-hotplug
    -> min_cpu_count
    -> max_cpu_count
    -> freq_load_tolerance (percentage of maximum supported frequency)
    -> tick_interval (in milisecond)
    -> tick_anticipation( to favor rising system load, 0 or 1)

* anticipation behavior is improved. Instead of increasing target limit for closing cpu, check interval is increased and target limit for booting cpu is decreased. Thus less timer tick -> better overall system performance
* hotplug ticks used in ondemand and conservative governors are now disabled when not needed(system is idle, system is under heavy load). Thus significantly improved overall system power consumption.
* tunables are exported to sysfs under /sys/devices/system/cpu/dvfs-hotplug
  -> min_cpu_count
  -> max_cpu_count
  -> freq_load_tolerance (percentage of maximum supported frequency)
  -> tick_interval (in milisecond)
  -> tick_anticipation( to favor rising system load, 0 or 1)
mdrjr added a commit that referenced this pull request Apr 23, 2013
Improvement on Exynos4x12 DVFS Hotplug driver
@mdrjr mdrjr merged commit e1aec5b into hardkernel:odroid-3.8.y Apr 23, 2013
hardkernel pushed a commit that referenced this pull request Apr 29, 2013
Currently IOP3XX_PERIPHERAL_VIRT_BASE conflicts with PCI_IO_VIRT_BASE:

					address         size
	PCI_IO_VIRT_BASE                0xfee00000      0x200000
	IOP3XX_PERIPHERAL_VIRT_BASE     0xfeffe000      0x2000

Fix by moving IOP3XX_PERIPHERAL_VIRT_BASE below PCI_IO_VIRT_BASE.

The patch fixes the following kernel panic with 3.9-rc1 on iop3xx boards:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-rc1-iop32x (aaro@blackmetal) (gcc version 4.7.2 (GCC) ) #20 PREEMPT Tue Mar 5 16:44:36 EET 2013
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at mm/vmalloc.c:1145!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0    Not tainted  (3.9.0-rc1-iop32x #20)
[    0.000000] PC is at vm_area_add_early+0x4c/0x88
[    0.000000] LR is at add_static_vm_early+0x14/0x68
[    0.000000] pc : [<c03e74a8>]    lr : [<c03e1c40>]    psr: 800000d3
[    0.000000] sp : c03ffee4  ip : dfffdf88  fp : c03ffef4
[    0.000000] r10: 00000002  r9 : 000000cf  r8 : 00000653
[    0.000000] r7 : c040eca8  r6 : c03e2408  r5 : dfffdf60  r4 : 00200000
[    0.000000] r3 : dfffdfd8  r2 : feffe000  r1 : ff000000  r0 : dfffdf60
[    0.000000] Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 0000397f  Table: a0004000  DAC: 00000017
[    0.000000] Process swapper (pid: 0, stack limit = 0xc03fe1b8)
[    0.000000] Stack: (0xc03ffee4 to 0xc0400000)
[    0.000000] fee0:          00200000 c03fff0c c03ffef8 c03e1c40 c03e7468 00200000 fee00000
[    0.000000] ff00: c03fff2c c03fff10 c03e23e4 c03e1c38 feffe000 c0408ee4 ff000000 c0408f04
[    0.000000] ff20: c03fff3c c03fff30 c03e2434 c03e23b4 c03fff84 c03fff40 c03e2c94 c03e2414
[    0.000000] ff40: c03f8878 c03f6410 ffff0000 000bffff 00001000 00000008 c03fff84 c03f6410
[    0.000000] ff60: c04227e8 c03fffd4 a0008000 c03f8878 69052e30 c02f96eb c03fffbc c03fff88
[    0.000000] ff80: c03e044c c03e268c 00000000 0000397f c0385130 00000001 ffffffff c03f8874
[    0.000000] ffa0: dfffffff a0004000 69052e30 a03f61a0 c03ffff4 c03fffc0 c03dd5cc c03e0184
[    0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c03f8878 0000397d c040601c
[    0.000000] ffe0: c03f8874 c0408674 00000000 c03ffff8 a0008040 c03dd558 00000000 00000000
[    0.000000] Backtrace:
[    0.000000] [<c03e745c>] (vm_area_add_early+0x0/0x88) from [<c03e1c40>] (add_static_vm_early+0x14/0x68)

Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
mdrjr pushed a commit that referenced this pull request May 12, 2013
commit f5d6a14 upstream.

Currently IOP3XX_PERIPHERAL_VIRT_BASE conflicts with PCI_IO_VIRT_BASE:

					address         size
	PCI_IO_VIRT_BASE                0xfee00000      0x200000
	IOP3XX_PERIPHERAL_VIRT_BASE     0xfeffe000      0x2000

Fix by moving IOP3XX_PERIPHERAL_VIRT_BASE below PCI_IO_VIRT_BASE.

The patch fixes the following kernel panic with 3.9-rc1 on iop3xx boards:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-rc1-iop32x (aaro@blackmetal) (gcc version 4.7.2 (GCC) ) #20 PREEMPT Tue Mar 5 16:44:36 EET 2013
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at mm/vmalloc.c:1145!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0    Not tainted  (3.9.0-rc1-iop32x #20)
[    0.000000] PC is at vm_area_add_early+0x4c/0x88
[    0.000000] LR is at add_static_vm_early+0x14/0x68
[    0.000000] pc : [<c03e74a8>]    lr : [<c03e1c40>]    psr: 800000d3
[    0.000000] sp : c03ffee4  ip : dfffdf88  fp : c03ffef4
[    0.000000] r10: 00000002  r9 : 000000cf  r8 : 00000653
[    0.000000] r7 : c040eca8  r6 : c03e2408  r5 : dfffdf60  r4 : 00200000
[    0.000000] r3 : dfffdfd8  r2 : feffe000  r1 : ff000000  r0 : dfffdf60
[    0.000000] Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 0000397f  Table: a0004000  DAC: 00000017
[    0.000000] Process swapper (pid: 0, stack limit = 0xc03fe1b8)
[    0.000000] Stack: (0xc03ffee4 to 0xc0400000)
[    0.000000] fee0:          00200000 c03fff0c c03ffef8 c03e1c40 c03e7468 00200000 fee00000
[    0.000000] ff00: c03fff2c c03fff10 c03e23e4 c03e1c38 feffe000 c0408ee4 ff000000 c0408f04
[    0.000000] ff20: c03fff3c c03fff30 c03e2434 c03e23b4 c03fff84 c03fff40 c03e2c94 c03e2414
[    0.000000] ff40: c03f8878 c03f6410 ffff0000 000bffff 00001000 00000008 c03fff84 c03f6410
[    0.000000] ff60: c04227e8 c03fffd4 a0008000 c03f8878 69052e30 c02f96eb c03fffbc c03fff88
[    0.000000] ff80: c03e044c c03e268c 00000000 0000397f c0385130 00000001 ffffffff c03f8874
[    0.000000] ffa0: dfffffff a0004000 69052e30 a03f61a0 c03ffff4 c03fffc0 c03dd5cc c03e0184
[    0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c03f8878 0000397d c040601c
[    0.000000] ffe0: c03f8874 c0408674 00000000 c03ffff8 a0008040 c03dd558 00000000 00000000
[    0.000000] Backtrace:
[    0.000000] [<c03e745c>] (vm_area_add_early+0x0/0x88) from [<c03e1c40>] (add_static_vm_early+0x14/0x68)

Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Jun 22, 2013
BugLink: http://bugs.launchpad.net/bugs/1175391

commit f5d6a14 upstream.

Currently IOP3XX_PERIPHERAL_VIRT_BASE conflicts with PCI_IO_VIRT_BASE:

					address         size
	PCI_IO_VIRT_BASE                0xfee00000      0x200000
	IOP3XX_PERIPHERAL_VIRT_BASE     0xfeffe000      0x2000

Fix by moving IOP3XX_PERIPHERAL_VIRT_BASE below PCI_IO_VIRT_BASE.

The patch fixes the following kernel panic with 3.9-rc1 on iop3xx boards:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-rc1-iop32x (aaro@blackmetal) (gcc version 4.7.2 (GCC) ) #20 PREEMPT Tue Mar 5 16:44:36 EET 2013
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at mm/vmalloc.c:1145!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0    Not tainted  (3.9.0-rc1-iop32x #20)
[    0.000000] PC is at vm_area_add_early+0x4c/0x88
[    0.000000] LR is at add_static_vm_early+0x14/0x68
[    0.000000] pc : [<c03e74a8>]    lr : [<c03e1c40>]    psr: 800000d3
[    0.000000] sp : c03ffee4  ip : dfffdf88  fp : c03ffef4
[    0.000000] r10: 00000002  r9 : 000000cf  r8 : 00000653
[    0.000000] r7 : c040eca8  r6 : c03e2408  r5 : dfffdf60  r4 : 00200000
[    0.000000] r3 : dfffdfd8  r2 : feffe000  r1 : ff000000  r0 : dfffdf60
[    0.000000] Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 0000397f  Table: a0004000  DAC: 00000017
[    0.000000] Process swapper (pid: 0, stack limit = 0xc03fe1b8)
[    0.000000] Stack: (0xc03ffee4 to 0xc0400000)
[    0.000000] fee0:          00200000 c03fff0c c03ffef8 c03e1c40 c03e7468 00200000 fee00000
[    0.000000] ff00: c03fff2c c03fff10 c03e23e4 c03e1c38 feffe000 c0408ee4 ff000000 c0408f04
[    0.000000] ff20: c03fff3c c03fff30 c03e2434 c03e23b4 c03fff84 c03fff40 c03e2c94 c03e2414
[    0.000000] ff40: c03f8878 c03f6410 ffff0000 000bffff 00001000 00000008 c03fff84 c03f6410
[    0.000000] ff60: c04227e8 c03fffd4 a0008000 c03f8878 69052e30 c02f96eb c03fffbc c03fff88
[    0.000000] ff80: c03e044c c03e268c 00000000 0000397f c0385130 00000001 ffffffff c03f8874
[    0.000000] ffa0: dfffffff a0004000 69052e30 a03f61a0 c03ffff4 c03fffc0 c03dd5cc c03e0184
[    0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c03f8878 0000397d c040601c
[    0.000000] ffe0: c03f8874 c0408674 00000000 c03ffff8 a0008040 c03dd558 00000000 00000000
[    0.000000] Backtrace:
[    0.000000] [<c03e745c>] (vm_area_add_early+0x0/0x88) from [<c03e1c40>] (add_static_vm_early+0x14/0x68)

Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
hardkernel pushed a commit that referenced this pull request Jun 29, 2013
…d reasons

commit 5cf02d0 upstream.

We've had some reports of a deadlock where rpciod ends up with a stack
trace like this:

    PID: 2507   TASK: ffff88103691ab40  CPU: 14  COMMAND: "rpciod/14"
     #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9
     #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs]
     #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f
     #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8
     #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs]
     #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs]
     #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670
     #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271
     #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638
     #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f
    #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e
    #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f
    #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad
    #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942
    #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a
    #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9
    #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b
    #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808
    #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c
    #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6
    #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7
    #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc]
    #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc]
    #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0
    #24 [ffff8810343bfee8] kthread at ffffffff8108dd96
    #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca

rpciod is trying to allocate memory for a new socket to talk to the
server. The VM ends up calling ->releasepage to get more memory, and it
tries to do a blocking commit. That commit can't succeed however without
a connected socket, so we deadlock.

Fix this by setting PF_FSTRANS on the workqueue task prior to doing the
socket allocation, and having nfs_release_page check for that flag when
deciding whether to do a commit call. Also, set PF_FSTRANS
unconditionally in rpc_async_schedule since that function can also do
allocations sometimes.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel pushed a commit that referenced this pull request Jun 29, 2013
commit 9b469a6 upstream.

Add 6 new devices and one modified device, based on
information from laptop vendor Windows drivers.

Sony provides a driver with two new devices using
a Gobi 2k+ layout (1199:68a5 and 1199:68a9).  The
Sony driver also adds a non-standard QMI/net
interface to the already supported 1199:9011
Gobi device. We do not know whether this is an
alternate interface number or an additional
interface which might be present, but that doesn't
really matter.

Lenovo provides a driver supporting 4 new devices:
 - MC7770 (1199:901b) with standard Gobi 2k+ layout
 - MC7700 (0f3d:68a2) with layout similar to MC7710
 - MC7750 (114f:68a2) with layout similar to MC7710
 - EM7700 (1199:901c) with layout similar to MC7710

Note regaring the three devices similar to MC7710:

The Windows drivers only support interface #8 on these
devices.  The MC7710 can support QMI/net functions on
interface #19 and #20 as well, and this driver is
verified to work on interface #19 (a firmware bug is
suspected to prevent #20 from working).

We do not enable these additional interfaces until they
either show up in a Windows driver or are verified to
work in some other way.  Therefore limiting the new
devices to interface #8 for now.

[bmork: backported to 3.4: use driver whitelisting]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ruppi pushed a commit that referenced this pull request Jul 16, 2013
Several people reported the warning: "kernel BUG at kernel/timer.c:729!"
and the stack trace is:

	#7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905
	#8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge]
	#9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge]
	#10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge]
	#11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge]
	#12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc
	#13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6
	#14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad
	#15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17
	#16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68
	#17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101
	#18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8
	#19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun]
	#20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun]
	#21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1
	#22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe
	#23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f
	#24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1
	#25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292

this is due to I forgot to check if mp->timer is armed in
br_multicast_del_pg(). This bug is introduced by
commit 9f00b2e (bridge: only expire the mdb entry
when query is received).

Same for __br_mdb_del().

Tested-by: poma <pomidorabelisima@gmail.com>
Reported-by: LiYonghua <809674045@qq.com>
Reported-by: Robert Hancock <hancockrwd@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hardkernel pushed a commit that referenced this pull request Jul 30, 2013
…s struct file

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
 #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
 #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
 #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
 #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
 #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
 #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
 #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
 #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
 #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
 #19 [ffff88062e365ee8] kthread at ffffffff81090886
 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------

Cc: stable@vger.kernel.org
Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
mdrjr pushed a commit that referenced this pull request Aug 26, 2013
…s struct file

commit e4daf1f upstream.

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
 #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
 #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
 #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
 #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
 #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
 #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
 #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
 #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
 #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
 #19 [ffff88062e365ee8] kthread at ffffffff81090886
 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------

Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Gu1 pushed a commit to Gu1/linux that referenced this pull request Aug 30, 2013
…s struct file

commit e4daf1f upstream.

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  hardkernel#9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
 hardkernel#10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
 hardkernel#11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
 hardkernel#12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
 hardkernel#13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
 hardkernel#14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
 hardkernel#15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
 hardkernel#16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
 hardkernel#17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
 hardkernel#18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
 hardkernel#19 [ffff88062e365ee8] kthread at ffffffff81090886
 hardkernel#20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------

Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel pushed a commit that referenced this pull request Nov 8, 2013
When booting secondary CPUs, announce_cpu() is called to show which cpu has
been brought up. For example:

[    0.402751] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 OK
[    0.525667] smpboot: Booting Node   1, Processors  #6 #7 #8 #9 #10 #11 OK
[    0.755592] smpboot: Booting Node   0, Processors  #12 #13 #14 #15 #16 #17 OK
[    0.890495] smpboot: Booting Node   1, Processors  #18 #19 #20 #21 #22 #23

But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum
possible cpu id. It should use the maximum present cpu id in case not all
CPUs booted up.

Signed-off-by: Libin <huawei.libin@huawei.com>
Cc: <guohanjun@huawei.com>
Cc: <wangyijing@huawei.com>
Cc: <fenghua.yu@intel.com>
Cc: <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com
[ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ruppi pushed a commit that referenced this pull request Nov 17, 2013
As the new x86 CPU bootup printout format code maintainer, I am
taking immediate action to improve and clean (and thus indulge
my OCD) the reporting of the cores when coming up online.

Fix padding to a right-hand alignment, cleanup code and bind
reporting width to the max number of supported CPUs on the
system, like this:

 [    0.074509] smpboot: Booting Node   0, Processors:      #1  #2  #3  #4  #5  #6  #7 OK
 [    0.644008] smpboot: Booting Node   1, Processors:  #8  #9 #10 #11 #12 #13 #14 #15 OK
 [    1.245006] smpboot: Booting Node   2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK
 [    1.864005] smpboot: Booting Node   3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK
 [    2.489005] smpboot: Booting Node   4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK
 [    3.093005] smpboot: Booting Node   5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK
 [    3.698005] smpboot: Booting Node   6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK
 [    4.304005] smpboot: Booting Node   7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK
 [    4.961413] Brought up 64 CPUs

and this:

 [    0.072367] smpboot: Booting Node   0, Processors:    #1 #2 #3 #4 #5 #6 #7 OK
 [    0.686329] Brought up 8 CPUs

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Libin <huawei.libin@huawei.com>
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ruppi pushed a commit that referenced this pull request Nov 17, 2013
Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hardkernel pushed a commit that referenced this pull request Jan 16, 2014
`comedi_free_board_dev()` is called (via `comedi_auto_unconfig()` -->
`comedi_release_hardware_device()`) when an auto-configured comedi
device is removed.  This destroys the main sysfs class device and then
calls `comedi_device_cleanup()` to clean up the comedi device.  For
comedi devices that have comedi subdevices that asynchronous commands,
the clean up involves destroying the sysfs class devices associated with
those subdevices.

There is a bug in the above sequence because the sysfs class devices
associated with the comedi subdevices are children of the sysfs class
device associated with the main comedi device.  Therefore they will have
been automatically destroyed when the main sysfs class device is
destroyed.  When they are destroyed again as part of the clean-up, they
will not be found, leading to a warning and a stack trace similar to
this:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 1213 at fs/sysfs/group.c:214
sysfs_remove_group+0x4e/0xa7()
sysfs group ffffffff817504c0 not found for kobject 'comedi4_subd0'
Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd
bridge stp llc sunrpc fuse binfmt_misc cpufreq_userspace sr_mod
snd_hda_codec_analog cdrom powernow_k8 kvm_amd kvm amplc_pci230(C)
8255(C) comedi(C) pcmcia xhci_hcd ehci_pci pcmcia_core ohci_pci ohci_hcd
ehci_hcd usbcore snd_hda_intel snd_hda_codec snd_pcm k8temp
snd_page_alloc 8139too snd_timer snd soundcore mii usb_common forcedeth
pata_amd
CPU: 1 PID: 1213 Comm: kworker/u4:6 Tainted: G         C
3.13.0-rc5-ija1+ #20
Hardware name: System manufacturer System Product Name/M2N-E, BIOS ASUS
M2N-E ACPI BIOS Revision 5001 03/23/2010
Workqueue: sysfsd sysfs_schedule_callback_work
 0000000000000000 ffff8800bf17fb38 ffffffff814672ce ffff8800bf17fb80
 ffff8800bf17fb70 ffffffff8103470b ffffffff8114f780 0000000000000000
 ffffffff817504c0 ffff8800bf39f410 ffff880139b68670 ffff8800bf17fbd0
Call Trace:
 [<ffffffff814672ce>] dump_stack+0x45/0x56
 [<ffffffff8103470b>] warn_slowpath_common+0x7a/0x93
 [<ffffffff8114f780>] ? sysfs_remove_group+0x4e/0xa7
 [<ffffffff8103476b>] warn_slowpath_fmt+0x47/0x49
 [<ffffffff8114e92d>] ? sysfs_get_dirent_ns+0x5e/0x66
 [<ffffffff8114f780>] sysfs_remove_group+0x4e/0xa7
 [<ffffffff8132aac0>] dpm_sysfs_remove+0x37/0x3b
 [<ffffffff81323781>] device_del+0x3e/0x173
 [<ffffffff813238c3>] device_unregister+0xd/0x18
 [<ffffffff8132392e>] device_destroy+0x33/0x37
 [<ffffffffa0212086>] comedi_free_subdevice_minor+0x80/0x92 [comedi]
 [<ffffffffa02128bb>] comedi_device_detach+0x79/0x152 [comedi]
 [<ffffffffa020f223>] comedi_device_cleanup+0x36/0x57 [comedi]
 [<ffffffffa020f275>] comedi_free_board_dev+0x31/0x3c [comedi]
 [<ffffffffa0211f2a>] comedi_release_hardware_device+0x5a/0x73 [comedi]
 [<ffffffffa0212547>] comedi_auto_unconfig+0xe/0x10 [comedi]
 [<ffffffffa021357c>] comedi_pci_auto_unconfig+0x10/0x12 [comedi]
 [<ffffffff811d2335>] pci_device_remove+0x40/0x8a
 [<ffffffff813261d0>] __device_release_driver+0x84/0xda
 [<ffffffff81326244>] device_release_driver+0x1e/0x2b
 [<ffffffff811cdcb5>] pci_stop_bus_device+0x44/0x87
 [<ffffffff811cdde2>] pci_stop_and_remove_bus_device+0xd/0x18
 [<ffffffff811d3f3d>] remove_callback+0x20/0x2f
 [<ffffffff8114d1f7>] sysfs_schedule_callback_work+0xf/0x70
 [<ffffffff81049498>] process_one_work+0x1d6/0x34c
 [<ffffffff81049a5f>] worker_thread+0x1cf/0x2b5
 [<ffffffff81049890>] ? rescuer_thread+0x258/0x258
 [<ffffffff8104e0e6>] kthread+0xd6/0xde
 [<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
 [<ffffffff81472cbc>] ret_from_fork+0x7c/0xb0
 [<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
---[ end trace 94722aa2936a7adf ]---

To correct the bug, rearrange `comedi_free_board_dev()` to destroy the
main sysfs class device *after* the clean-up operation.

Thanks to Bernd Porr for finding the bug and his initial attempt to fix
it.

Reported-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel pushed a commit that referenced this pull request Jan 16, 2014
…ssion()

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mdrjr pushed a commit that referenced this pull request Feb 1, 2014
…ssion()

commit 3dc91d4 upstream.

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
mdrjr pushed a commit that referenced this pull request Feb 17, 2014
…rupt handler

commit 19d4b72 upstream.

Mutexes should not be acquired in interrupt context. While the trylock
fastpath is arguably safe on all implementations, the slowpath
unlock path definitely isn't. This fixes the following lockdep splat:

[   13.044313] ------------[ cut here ]------------
[   13.044367] WARNING: at /c/kernel-tests/src/tip/kernel/mutex.c:858 mutex_trylock+0x87/0x220()
[   13.044378] DEBUG_LOCKS_WARN_ON(in_interrupt())
[   13.044378] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-rc4-00296-ga2963dd #20
[   13.044379] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   13.044390]  0000000000000009 ffff88000de039f8 ffffffff81fc86d5 ffff88000de03a38
[   13.044395]  ffffffff810d511b ffff880000000018 ffff88000f33c690 0000000000000001
[   13.044398]  00000000000003f0 ffff88000f4677c8 0000000000000000 ffff88000de03a98
[   13.044400] Call Trace:
[   13.044412]  <IRQ>  [<ffffffff81fc86d5>] dump_stack+0x19/0x1b
[   13.044441]  [<ffffffff810d511b>] warn_slowpath_common+0x6b/0x90
[   13.044445]  [<ffffffff810d51a6>] warn_slowpath_fmt+0x46/0x50
[   13.044448]  [<ffffffff81fd34d7>] mutex_trylock+0x87/0x220
[   13.044482]  [<ffffffff8186484d>] cirrus_dirty_update+0x1cd/0x330
[   13.044486]  [<ffffffff818649e8>] cirrus_imageblit+0x38/0x50
[   13.044506]  [<ffffffff8165782e>] soft_cursor+0x22e/0x240
[   13.044510]  [<ffffffff81656c31>] bit_cursor+0x581/0x5b0
[   13.044525]  [<ffffffff815de9f4>] ? vsnprintf+0x124/0x670
[   13.044529]  [<ffffffff81651333>] ? get_color.isra.16+0x43/0x130
[   13.044532]  [<ffffffff81653fca>] fbcon_cursor+0x18a/0x1d0
[   13.044535]  [<ffffffff816566b0>] ? update_attr.isra.2+0xa0/0xa0
[   13.044556]  [<ffffffff81754b82>] hide_cursor+0x32/0xa0
[   13.044565]  [<ffffffff81755bd3>] vt_console_print+0x103/0x3b0
[   13.044569]  [<ffffffff810d58ac>] ? print_time+0x9c/0xb0
[   13.044576]  [<ffffffff810d5960>] ? print_prefix+0xa0/0xc0
[   13.044580]  [<ffffffff810d63f6>] call_console_drivers.constprop.6+0x146/0x1f0
[   13.044593]  [<ffffffff815f9b38>] ? do_raw_spin_unlock+0xc8/0x100
[   13.044597]  [<ffffffff810d6f27>] console_unlock+0x2f7/0x460
[   13.044600]  [<ffffffff810d787a>] vprintk_emit+0x59a/0x5e0
[   13.044615]  [<ffffffff81fb676c>] printk+0x4d/0x4f
[   13.044650]  [<ffffffff82ba5511>] print_local_APIC+0x28/0x41c
[   13.044672]  [<ffffffff8114db55>] generic_smp_call_function_single_interrupt+0x145/0x2b0
[   13.044688]  [<ffffffff8106f9e7>] smp_call_function_single_interrupt+0x27/0x40
[   13.044697]  [<ffffffff81fd8f72>] call_function_single_interrupt+0x72/0x80
[   13.044707]  <EOI>  [<ffffffff81078166>] ? native_safe_halt+0x6/0x10
[   13.044717]  [<ffffffff811425cd>] ? trace_hardirqs_on+0xd/0x10
[   13.044738]  [<ffffffff8104f669>] default_idle+0x59/0x120
[   13.044742]  [<ffffffff810501e8>] arch_cpu_idle+0x18/0x40
[   13.044754]  [<ffffffff811320c5>] cpu_startup_entry+0x235/0x410
[   13.044763]  [<ffffffff81f9e781>] rest_init+0xd1/0xe0
[   13.044766]  [<ffffffff81f9e6b5>] ? rest_init+0x5/0xe0
[   13.044778]  [<ffffffff82b93ec2>] start_kernel+0x425/0x493
[   13.044781]  [<ffffffff82b93810>] ? repair_env_string+0x5e/0x5e
[   13.044786]  [<ffffffff82b93595>] x86_64_start_reservations+0x2a/0x2c
[   13.044789]  [<ffffffff82b93688>] x86_64_start_kernel+0xf1/0x100
[   13.044799] ---[ end trace 113ad28772af4058 ]---

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
mdrjr pushed a commit that referenced this pull request Mar 26, 2014
…ssion()

commit 3dc91d4 upstream.

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit to ruppi/linux that referenced this pull request Jun 16, 2014
…ssion()

commit 3dc91d4 upstream.

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [hardkernel#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty hardkernel#20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dsd pushed a commit to dsd/linux that referenced this pull request Jul 7, 2014
This patch tries to fix this crash:

 hardkernel#5 [ffff88003c1cd690] do_invalid_op at ffffffff810166d5
 hardkernel#6 [ffff88003c1cd730] invalid_op at ffffffff8159b2de
    [exception RIP: ocfs2_direct_IO_get_blocks+359]
    RIP: ffffffffa05dfa27  RSP: ffff88003c1cd7e8  RFLAGS: 00010202
    RAX: 0000000000000000  RBX: ffff88003c1cdaa8  RCX: 0000000000000000
    RDX: 000000000000000c  RSI: ffff880027a95000  RDI: ffff88003c79b540
    RBP: ffff88003c1cd858   R8: 0000000000000000   R9: ffffffff815f6ba0
    R10: 00000000000001c9  R11: 00000000000001c9  R12: ffff88002d271500
    R13: 0000000000000001  R14: 0000000000000000  R15: 0000000000001000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 hardkernel#7 [ffff88003c1cd860] do_direct_IO at ffffffff811cd31b
 hardkernel#8 [ffff88003c1cd950] direct_IO_iovec at ffffffff811cde9c
 hardkernel#9 [ffff88003c1cd9b0] do_blockdev_direct_IO at ffffffff811ce764
hardkernel#10 [ffff88003c1cdb80] __blockdev_direct_IO at ffffffff811ce7cc
hardkernel#11 [ffff88003c1cdbb0] ocfs2_direct_IO at ffffffffa05df756 [ocfs2]
hardkernel#12 [ffff88003c1cdbe0] generic_file_direct_write_iter at ffffffff8112f935
hardkernel#13 [ffff88003c1cdc40] ocfs2_file_write_iter at ffffffffa0600ccc [ocfs2]
hardkernel#14 [ffff88003c1cdd50] do_aio_write at ffffffff8119126c
hardkernel#15 [ffff88003c1cddc0] aio_rw_vect_retry at ffffffff811d9bb4
hardkernel#16 [ffff88003c1cddf0] aio_run_iocb at ffffffff811db880
hardkernel#17 [ffff88003c1cde30] io_submit_one at ffffffff811dc238
hardkernel#18 [ffff88003c1cde80] do_io_submit at ffffffff811dc437
hardkernel#19 [ffff88003c1cdf70] sys_io_submit at ffffffff811dc530
hardkernel#20 [ffff88003c1cdf80] system_call_fastpath at ffffffff8159a159

It crashes at
        BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED));
in ocfs2_direct_IO_get_blocks.

ocfs2_direct_IO_get_blocks is expecting the OCFS2_EXT_REFCOUNTED be removed in
ocfs2_prepare_inode_for_write() if it was there. But no cluster lock is taken
during the time before (or inside) ocfs2_prepare_inode_for_write() and after
ocfs2_direct_IO_get_blocks().

It can happen in this case:

Node A(which crashes)				Node B
------------------------                 ---------------------------
ocfs2_file_aio_write
  ocfs2_prepare_inode_for_write
    ocfs2_inode_lock
    ...
    ocfs2_inode_unlock
  #no refcount found
....					ocfs2_reflink
                                          ocfs2_inode_lock
                                          ...
                                          ocfs2_inode_unlock
                                          #now, refcount flag set on extent

                                        ...
                                        flush change to disk

ocfs2_direct_IO_get_blocks
  ocfs2_get_clusters
    #extent map miss
    #buffer_head miss
    read extents from disk
  found refcount flag on extent
  crash..

Fix:
Take rw_lock in ocfs2_reflink path

Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mdrjr pushed a commit that referenced this pull request Jul 14, 2014
…s struct file

commit e4daf1f upstream.

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
 #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
 #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
 #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
 #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
 #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
 #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
 #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
 #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
 #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
 #19 [ffff88062e365ee8] kthread at ffffffff81090886
 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------


Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[xr: Backported to 3.4: adjust context]
Signed-off-by: Rui Xiang <rui.xiang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel pushed a commit that referenced this pull request Jul 16, 2014
…ssion()

commit 3dc91d4 upstream.

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

	isec = inode->i_security;

	rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jepler pushed a commit to jepler/odroid-linux that referenced this pull request Aug 7, 2014
Mike Galbraith captered the following:
| >hardkernel#11 [ffff88017b243e90] _raw_spin_lock at ffffffff815d2596
| >hardkernel#12 [ffff88017b243e90] rt_mutex_trylock at ffffffff815d15be
| >hardkernel#13 [ffff88017b243eb0] get_next_timer_interrupt at ffffffff81063b42
| >hardkernel#14 [ffff88017b243f00] tick_nohz_stop_sched_tick at ffffffff810bd1fd
| >hardkernel#15 [ffff88017b243f70] tick_nohz_irq_exit at ffffffff810bd7d2
| >hardkernel#16 [ffff88017b243f90] irq_exit at ffffffff8105b02d
| >hardkernel#17 [ffff88017b243fb0] reschedule_interrupt at ffffffff815db3dd
| >--- <IRQ stack> ---
| >hardkernel#18 [ffff88017a2a9bc8] reschedule_interrupt at ffffffff815db3dd
| >    [exception RIP: task_blocks_on_rt_mutex+51]
| >hardkernel#19 [ffff88017a2a9ce0] rt_spin_lock_slowlock at ffffffff815d183c
| >hardkernel#20 [ffff88017a2a9da0] lock_timer_base.isra.35 at ffffffff81061cbf
| >hardkernel#21 [ffff88017a2a9dd0] schedule_timeout at ffffffff815cf1ce
| >hardkernel#22 [ffff88017a2a9e50] rcu_gp_kthread at ffffffff810f9bbb
| >hardkernel#23 [ffff88017a2a9ed0] kthread at ffffffff810796d5
| >hardkernel#24 [ffff88017a2a9f50] ret_from_fork at ffffffff815da04c

lock_timer_base() does a try_lock() which deadlocks on the waiter lock
not the lock itself.
This patch takes the waiter_lock with trylock so it should work from interrupt
context as well. If the fastpath doesn't work and the waiter_lock itself is
taken then it seems that the lock itself taken.
This patch also adds a "rt_spin_try_unlock" to keep lockdep happy. If we
managed to take the wait_lock in the first place we should also be able
to take it in the unlock path.

Cc: stable-rt@vger.kernel.org
Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
paralin pushed a commit to paralin/linux that referenced this pull request Aug 14, 2015
Nikolay has reported a hang when a memcg reclaim got stuck with the
following backtrace:

PID: 18308  TASK: ffff883d7c9b0a30  CPU: 1   COMMAND: "rsync"
  #0 __schedule at ffffffff815ab152
  hardkernel#1 schedule at ffffffff815ab76e
  hardkernel#2 schedule_timeout at ffffffff815ae5e5
  hardkernel#3 io_schedule_timeout at ffffffff815aad6a
  hardkernel#4 bit_wait_io at ffffffff815abfc6
  hardkernel#5 __wait_on_bit at ffffffff815abda5
  hardkernel#6 wait_on_page_bit at ffffffff8111fd4f
  hardkernel#7 shrink_page_list at ffffffff81135445
  hardkernel#8 shrink_inactive_list at ffffffff81135845
  hardkernel#9 shrink_lruvec at ffffffff81135ead
 hardkernel#10 shrink_zone at ffffffff811360c3
 hardkernel#11 shrink_zones at ffffffff81136eff
 hardkernel#12 do_try_to_free_pages at ffffffff8113712f
 hardkernel#13 try_to_free_mem_cgroup_pages at ffffffff811372be
 hardkernel#14 try_charge at ffffffff81189423
 hardkernel#15 mem_cgroup_try_charge at ffffffff8118c6f5
 hardkernel#16 __add_to_page_cache_locked at ffffffff8112137d
 hardkernel#17 add_to_page_cache_lru at ffffffff81121618
 hardkernel#18 pagecache_get_page at ffffffff8112170b
 hardkernel#19 grow_dev_page at ffffffff811c8297
 hardkernel#20 __getblk_slow at ffffffff811c91d6
 hardkernel#21 __getblk_gfp at ffffffff811c92c1
 hardkernel#22 ext4_ext_grow_indepth at ffffffff8124565c
 hardkernel#23 ext4_ext_create_new_leaf at ffffffff81246ca8
 hardkernel#24 ext4_ext_insert_extent at ffffffff81246f09
 hardkernel#25 ext4_ext_map_blocks at ffffffff8124a848
 hardkernel#26 ext4_map_blocks at ffffffff8121a5b7
 hardkernel#27 mpage_map_one_extent at ffffffff8121b1fa
 hardkernel#28 mpage_map_and_submit_extent at ffffffff8121f07b
 hardkernel#29 ext4_writepages at ffffffff8121f6d5
 hardkernel#30 do_writepages at ffffffff8112c490
 hardkernel#31 __filemap_fdatawrite_range at ffffffff81120199
 hardkernel#32 filemap_flush at ffffffff8112041c
 hardkernel#33 ext4_alloc_da_blocks at ffffffff81219da1
 hardkernel#34 ext4_rename at ffffffff81229b91
 hardkernel#35 ext4_rename2 at ffffffff81229e32
 hardkernel#36 vfs_rename at ffffffff811a08a5
 hardkernel#37 SYSC_renameat2 at ffffffff811a3ffc
 hardkernel#38 sys_renameat2 at ffffffff811a408e
 hardkernel#39 sys_rename at ffffffff8119e51e
 hardkernel#40 system_call_fastpath at ffffffff815afa89

Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.

The heuristic was introduced by commit e62e384 ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified.  The code has been changed by c3b94f4 ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code.  But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.

ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio.  Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.

Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback.  The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.

As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem.  Moreover he notes:

: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.

Cc: stable@vger.kernel.org # 3.9+
[tytso@mit.edu: corrected the control flow]
Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages")
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Oct 29, 2016
commit b6bc1c7 upstream.

Function ib_create_qp() was failing to return an error when
rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp()
when trying to dereferece the qp pointer which was actually a negative
errno.

The crash:

crash> log|grep BUG
[  136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
crash> bt
PID: 3736   TASK: ffff8808543215c0  CPU: 2   COMMAND: "kworker/u64:2"
 #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0
 hardkernel#1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758
 hardkernel#2 [ffff88084d323480] crash_kexec at ffffffff8111682d
 hardkernel#3 [ffff88084d3234b0] oops_end at ffffffff81032bd6
 hardkernel#4 [ffff88084d3234e0] no_context at ffffffff8106e431
 hardkernel#5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610
 hardkernel#6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4
 hardkernel#7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc
 hardkernel#8 [ffff88084d323620] do_page_fault at ffffffff8106f057
 hardkernel#9 [ffff88084d323660] page_fault at ffffffff816e3148
    [exception RIP: ib_create_qp+427]
    RIP: ffffffffa02554fb  RSP: ffff88084d323718  RFLAGS: 00010246
    RAX: 0000000000000004  RBX: fffffffffffffff4  RCX: 000000018020001f
    RDX: ffff880830997fc0  RSI: 0000000000000001  RDI: ffff88085f407200
    RBP: ffff88084d323778   R8: 0000000000000001   R9: ffffea0020bae210
    R10: ffffea0020bae218  R11: 0000000000000001  R12: ffff88084d3237c8
    R13: 00000000fffffff4  R14: ffff880859fa5000  R15: ffff88082eb89800
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
hardkernel#10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm]
hardkernel#11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma]
hardkernel#12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma]
hardkernel#13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma]
hardkernel#14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma]
hardkernel#15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm]
hardkernel#16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm]
hardkernel#17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm]
hardkernel#18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm]
hardkernel#19 [ffff88084d323cb0] process_one_work at ffffffff810a1483
hardkernel#20 [ffff88084d323d90] worker_thread at ffffffff810a211d
hardkernel#21 [ffff88084d323ec0] kthread at ffffffff810a6c5c
hardkernel#22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf

Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Nov 1, 2016
commit 776b2e1 upstream.

X722 hardware requires using the admin queue to configure RSS. This
function was previously re-written in commit e69ff81 ("i40e: rework
the functions to configure RSS with similar parameters").
However, the previous refactor did not work correctly for a few reasons

(a) it does not check whether seed is NULL before using it, resulting in
a NULL pointer dereference

[  402.954721] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  402.955568] IP: [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  402.956402] PGD ad610067 PUD accc0067 PMD 0
[  402.957235] Oops: 0000 [hardkernel#1] SMP
[  402.958064] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_filter ebtable_
broute bridge stp llc ebtable_nat ebtables ip6table_mangle ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv
6 ip6table_security ip6table_filter ip6_tables iptable_mangle iptable_raw iptable_nat nf_conntrack_ipv4_ nf_defrag_ipv4_ nf_nat_ip
v4_ nf_nat nf_conntrack iptable_security intel_rapl i86_kg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_clMl crc32_
pclMl ghash_clMlni_intel iTCO_wdt iTCO_vendor_support shpchp sb_edac dcdbas pcspkr joydev ipmi_devintf wmi edac_core ipmi_ssif
 acpi_ad acpi_ower_meter ipmi_si ipmi_msghandler mei_me nfsd lpc_ich mei ioatdma tpm_tis auth_rpcgss tpm nfs_acl lockd grace s
unrpc ifs nngag200 i2c_algo_bit drm_kms_helper ttm drm iigbe bnx2x i40e dca mdio ptp pps_core libcrc32c fjes crc32c_intel
[  402.965563] CPU: 22 PID: 2461 Conm: ethtool Not tainted 4.6.0-rc7_1.2-ABNidQ+ hardkernel#20
[  402.966719] Hardware name: Dell Inc. PowerEdge R720/0C4Y3R, BIOS 2.5.2 01/28/2015
[  402.967862] task: ffff880219b51dc0 ti: ffff8800b3408000 task.ti: ffff8800b3408000
[  402.969046] RIP: 0010:[<ffffffffa0090ccf>]  [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  402.970339] RSP: 0018:ffff8800b340ba90  EFLAGS: 00010246
[  402.971616] RAX: 0000000000000000 RBX: ffff88042ec14000 RCX: 0000000000000200
[  402.972961] RDX: ffff880428eb9200 RSI: 0000000000000000 RDI: ffff88042ec14000
[  402.974312] RBP: ffff8800b340baf8 R08: ffff880237ada8f0 R09: ffff880428eb9200
[  402.975709] R10: ffff880428eb9200 R11: 0000000000000000 R12: ffff88042ec2e000
[  402.977104] R13: ffff88042ec2e000 R14: ffff88042ec14000 R15: ffff88022ea00800
[  402.978541] FS:  00007f84fd054700(0000) GS:ffff880237ac0000(0000) knlGS:0000000000000000
[  402.980003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  402.981508] CR2: 0000000000000000 CR3: 000000003289e000 CR4: 00000000000406e0
[  402.983028] Stack:
[  402.984578]  0000000002000200 0000000000000000 ffff88023ffeda68 ffff88023ffef000
[  402.986187]  0000000000000268 ffff8800b340bbf8 ffff88023ffedd80 0000000088ce4f1d
[  402.987844]  ffff88042ec14000 ffff88022ea00800 ffff88042ec2e000 ffff88042ec14000
[  402.989509] Call Trace:
[  402.991200]  [<ffffffffa009636f>] i40e_config_rss+0x11f/0x1c0 [i40e]
[  402.992924]  [<ffffffffa00a1ae0>] i40e_set_rifh+0ic0/0x130 [i40e]
[  402.994684]  [<ffffffff816d54b7>] ethtool_set_rifh+0x1f7/0x300
[  402.996446]  [<ffffffff8136d02b>] ? cred_has_capability+0io6b/0x100
[  402.998203]  [<ffffffff8136d102>] ? selinux_capable+0x12/0x20
[  402.999968]  [<ffffffff8136277b>] ? security_capable+0x4b/0x70
[  403.001707]  [<ffffffff816d6da3>] dev_ethtool+0x1423/0x2290
[  403.003461]  [<ffffffff816eab41>] dev_ioctl+0x191/0io630
[  403.005186]  [<ffffffff811cf80a>] ? lru_cache_add+0x3a/0i80
[  403.006942]  [<ffffffff817f2a8e>] ? _raw_spin_unlock+0ie/0x20
[  403.008691]  [<ffffffff816adb95>] sock_do_ioctl+0x45/0i50
[  403.010421]  [<ffffffff816ae229>] sock_ioctl+0x209/0x2d0
[  403.012173]  [<ffffffff81262194>] do_vfs_ioctl+0u4/0io6c0
[  403.013911]  [<ffffffff81262829>] SyS_ioctl+0x79/0x90
[  403.015710]  [<ffffffff817f2e72>] entry_SYSCALL_64_fastpath+0x1a/0u4
[  403.017500] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 89 fb 48 83 ec 40 4c 8b a7 e0 05 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 <48> 8b 06 41 0f b7 bc 24 f2 0f 00 00 48 89 45 9c 48 8b 46 08 48
[  403.021454] RIP  [<ffffffffa0090ccf>] i40e_config_rss_aq.constprop.65+0x2f/0x1c0 [i40e]
[  403.023395]  RSP <ffff8800b340ba90>
[  403.025271] CR2: 0000000000000000
[  403.027169] ---[ end trace 64561b528cf61cf0 ]---

(b) it does not even bother to use the passed in *lut parameter which
defines the requested lookup table. Instead it uses its own round robin
table.

Fix these issues by re-writing it to be similar to i40e_config_rss_reg
and i40e_get_rss_aq.

Fixes: e69ff81 ("i40e: rework the functions to configure RSS with similar parameters", 2015-10-21)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Jan 9, 2017
commit 4dfce57 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 hardkernel#9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
hardkernel#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
hardkernel#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
hardkernel#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
hardkernel#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
hardkernel#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
hardkernel#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
hardkernel#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
hardkernel#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
hardkernel#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
hardkernel#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
hardkernel#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
hardkernel#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
hardkernel#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmole pushed a commit to Dmole/linux that referenced this pull request Mar 22, 2017
[ Upstream commit 45caeaa ]

As Eric Dumazet pointed out this also needs to be fixed in IPv6.
v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.

We have seen a few incidents lately where a dst_enty has been freed
with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
dst_entry. If the conditions/timings are right a crash then ensues when the
freed dst_entry is referenced later on. A Common crashing back trace is:

 hardkernel#8 [] page_fault at ffffffff8163e648
    [exception RIP: __tcp_ack_snd_check+74]
.
.
 hardkernel#9 [] tcp_rcv_established at ffffffff81580b64
hardkernel#10 [] tcp_v4_do_rcv at ffffffff8158b54a
hardkernel#11 [] tcp_v4_rcv at ffffffff8158cd02
hardkernel#12 [] ip_local_deliver_finish at ffffffff815668f4
hardkernel#13 [] ip_local_deliver at ffffffff81566bd9
hardkernel#14 [] ip_rcv_finish at ffffffff8156656d
hardkernel#15 [] ip_rcv at ffffffff81566f06
hardkernel#16 [] __netif_receive_skb_core at ffffffff8152b3a2
hardkernel#17 [] __netif_receive_skb at ffffffff8152b608
hardkernel#18 [] netif_receive_skb at ffffffff8152b690
hardkernel#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3]
hardkernel#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3]
hardkernel#21 [] net_rx_action at ffffffff8152bac2
hardkernel#22 [] __do_softirq at ffffffff81084b4f
hardkernel#23 [] call_softirq at ffffffff8164845c
hardkernel#24 [] do_softirq at ffffffff81016fc5
hardkernel#25 [] irq_exit at ffffffff81084ee5
hardkernel#26 [] do_IRQ at ffffffff81648ff8

Of course it may happen with other NIC drivers as well.

It's found the freed dst_entry here:

 224 static bool tcp_in_quickack_mode(struct sock *sk)↩
 225 {↩
 226 ▹       const struct inet_connection_sock *icsk = inet_csk(sk);↩
 227 ▹       const struct dst_entry *dst = __sk_dst_get(sk);↩
 228 ↩
 229 ▹       return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩
 230 ▹       ▹       (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩
 231 }↩

But there are other backtraces attributed to the same freed dst_entry in
netfilter code as well.

All the vmcores showed 2 significant clues:

- Remote hosts behind the default gateway had always been redirected to a
different gateway. A rtable/dst_entry will be added for that host. Making
more dst_entrys with lower reference counts. Making this more probable.

- All vmcores showed a postitive LockDroppedIcmps value, e.g:

LockDroppedIcmps                  267

A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
regardless of whether user space has the socket locked. This can result in a
race condition where the same dst_entry cached in sk->sk_dst_entry can be
decremented twice for the same socket via:

do_redirect()->__sk_dst_check()-> dst_release().

Which leads to the dst_entry being prematurely freed with another socket
pointing to it via sk->sk_dst_cache and a subsequent crash.

To fix this skip do_redirect() if usespace has the socket locked. Instead let
the redirect take place later when user space does not have the socket
locked.

The dccp/IPv6 code is very similar in this respect, so fixing it there too.

As Eric Garver pointed out the following commit now invalidates routes. Which
can set the dst->obsolete flag so that ipv4_dst_check() returns null and
triggers the dst_release().

Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.")
Cc: Eric Garver <egarver@redhat.com>
Cc: Hannes Sowa <hsowa@redhat.com>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Aug 5, 2019
commit 46cc0b4 upstream.

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com

Cc: stable@vger.kernel.org
Fixes: ad909e2 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Owersun pushed a commit to Owersun/linux-hardkernel that referenced this pull request Aug 20, 2019
Make debug exceptions visible from RCU so that synchronize_rcu()
correctly track the debug exception handler.

This also introduces sanity checks for user-mode exceptions as same
as x86's ist_enter()/ist_exit().

The debug exception can interrupt in idle task. For example, it warns
if we put a kprobe on a function called from idle task as below.
The warning message showed that the rcu_read_lock() caused this
problem. But actually, this means the RCU is lost the context which
is already in NMI/IRQ.

  /sys/kernel/debug/tracing # echo p default_idle_call >> kprobe_events
  /sys/kernel/debug/tracing # echo 1 > events/kprobes/enable
  /sys/kernel/debug/tracing # [  135.122237]
  [  135.125035] =============================
  [  135.125310] WARNING: suspicious RCU usage
  [  135.125581] 5.2.0-08445-g9187c508bdc7 hardkernel#20 Not tainted
  [  135.125904] -----------------------------
  [  135.126205] include/linux/rcupdate.h:594 rcu_read_lock() used illegally while idle!
  [  135.126839]
  [  135.126839] other info that might help us debug this:
  [  135.126839]
  [  135.127410]
  [  135.127410] RCU used illegally from idle CPU!
  [  135.127410] rcu_scheduler_active = 2, debug_locks = 1
  [  135.128114] RCU used illegally from extended quiescent state!
  [  135.128555] 1 lock held by swapper/0/0:
  [  135.128944]  #0: (____ptrval____) (rcu_read_lock){....}, at: call_break_hook+0x0/0x178
  [  135.130499]
  [  135.130499] stack backtrace:
  [  135.131192] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-08445-g9187c508bdc7 hardkernel#20
  [  135.131841] Hardware name: linux,dummy-virt (DT)
  [  135.132224] Call trace:
  [  135.132491]  dump_backtrace+0x0/0x140
  [  135.132806]  show_stack+0x24/0x30
  [  135.133133]  dump_stack+0xc4/0x10c
  [  135.133726]  lockdep_rcu_suspicious+0xf8/0x108
  [  135.134171]  call_break_hook+0x170/0x178
  [  135.134486]  brk_handler+0x28/0x68
  [  135.134792]  do_debug_exception+0x90/0x150
  [  135.135051]  el1_dbg+0x18/0x8c
  [  135.135260]  default_idle_call+0x0/0x44
  [  135.135516]  cpu_startup_entry+0x2c/0x30
  [  135.135815]  rest_init+0x1b0/0x280
  [  135.136044]  arch_call_rest_init+0x14/0x1c
  [  135.136305]  start_kernel+0x4d4/0x500
  [  135.136597]

So make debug exception visible to RCU can fix this warning.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Owersun pushed a commit to Owersun/linux-hardkernel that referenced this pull request Aug 20, 2019
A deadlock with this stacktrace was observed.

The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.

In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   hardkernel#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   hardkernel#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   hardkernel#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   hardkernel#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   hardkernel#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   hardkernel#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   hardkernel#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  hardkernel#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  hardkernel#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  hardkernel#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  hardkernel#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  hardkernel#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

  PID: 14127  TASK: ffff881455749c00  CPU: 11  COMMAND: "loop1"
   #0 [ffff88272f5af228] __schedule at ffffffff8173f405
   #1 [ffff88272f5af280] schedule at ffffffff8173fa27
   #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
   hardkernel#3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
   hardkernel#4 [ffff88272f5af330] mutex_lock at ffffffff81742133
   hardkernel#5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
   hardkernel#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
   hardkernel#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
   hardkernel#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
   hardkernel#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
  hardkernel#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
  hardkernel#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
  hardkernel#12 [ffff88272f5af760] new_slab at ffffffff811f4523
  hardkernel#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
  hardkernel#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
  hardkernel#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
  hardkernel#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
  hardkernel#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
  hardkernel#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
  hardkernel#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
  hardkernel#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
  hardkernel#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
  hardkernel#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
  hardkernel#23 [ffff88272f5afec0] kthread at ffffffff810a8428
  hardkernel#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mdrjr pushed a commit that referenced this pull request Aug 29, 2019
commit d0a255e upstream.

A deadlock with this stacktrace was observed.

The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.

In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  #13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

  PID: 14127  TASK: ffff881455749c00  CPU: 11  COMMAND: "loop1"
   #0 [ffff88272f5af228] __schedule at ffffffff8173f405
   #1 [ffff88272f5af280] schedule at ffffffff8173fa27
   #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e
   #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5
   #4 [ffff88272f5af330] mutex_lock at ffffffff81742133
   #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio]
   #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd
   #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778
   #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34
   #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8
  #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3
  #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71
  #12 [ffff88272f5af760] new_slab at ffffffff811f4523
  #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5
  #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b
  #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3
  #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3
  #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs]
  #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994
  #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs]
  #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop]
  #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop]
  #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c
  #23 [ffff88272f5afec0] kthread at ffffffff810a8428
  #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Oct 19, 2019
commit 46cc0b4 upstream.

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com

Fixes: ad909e2 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mdrjr pushed a commit that referenced this pull request Oct 22, 2019
commit f9c6456 upstream.

Masoud Sharbiani noticed that commit 29ef680 ("memcg, oom: move
out_of_memory back to the charge path") broke memcg OOM called from
__xfs_filemap_fault() path.  It turned out that try_charge() is retrying
forever without making forward progress because mem_cgroup_oom(GFP_NOFS)
cannot invoke the OOM killer due to commit 3da88fb ("mm, oom:
move GFP_NOFS check to out_of_memory").

Allowing forced charge due to being unable to invoke memcg OOM killer will
lead to global OOM situation.  Also, just returning -ENOMEM will be risky
because OOM path is lost and some paths (e.g.  get_user_pages()) will leak
-ENOMEM.  Therefore, invoking memcg OOM killer (despite GFP_NOFS) will be
the only choice we can choose for now.

Until 29ef680, we were able to invoke memcg OOM killer when
GFP_KERNEL reclaim failed [1].  But since 29ef680, we need to
invoke memcg OOM killer when GFP_NOFS reclaim failed [2].  Although in the
past we did invoke memcg OOM killer for GFP_NOFS [3], we might get
pre-mature memcg OOM reports due to this patch.

[1]

 leaker invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), nodemask=(null), order=0, oom_score_adj=0
 CPU: 0 PID: 2746 Comm: leaker Not tainted 4.18.0+ #19
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
 Call Trace:
  dump_stack+0x63/0x88
  dump_header+0x67/0x27a
  ? mem_cgroup_scan_tasks+0x91/0xf0
  oom_kill_process+0x210/0x410
  out_of_memory+0x10a/0x2c0
  mem_cgroup_out_of_memory+0x46/0x80
  mem_cgroup_oom_synchronize+0x2e4/0x310
  ? high_work_func+0x20/0x20
  pagefault_out_of_memory+0x31/0x76
  mm_fault_error+0x55/0x115
  ? handle_mm_fault+0xfd/0x220
  __do_page_fault+0x433/0x4e0
  do_page_fault+0x22/0x30
  ? page_fault+0x8/0x30
  page_fault+0x1e/0x30
 RIP: 0033:0x4009f0
 Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83
 RSP: 002b:00007ffe29ae96f0 EFLAGS: 00010206
 RAX: 000000000000001b RBX: 0000000000000000 RCX: 0000000001ce1000
 RDX: 0000000000000000 RSI: 000000007fffffe5 RDI: 0000000000000000
 RBP: 000000000000000c R08: 0000000000000000 R09: 00007f94be09220d
 R10: 0000000000000002 R11: 0000000000000246 R12: 00000000000186a0
 R13: 0000000000000003 R14: 00007f949d845000 R15: 0000000002800000
 Task in /leaker killed as a result of limit of /leaker
 memory: usage 524288kB, limit 524288kB, failcnt 158965
 memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0
 kmem: usage 2016kB, limit 9007199254740988kB, failcnt 0
 Memory cgroup stats for /leaker: cache:844KB rss:521136KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:132KB writeback:0KB inactive_anon:0KB active_anon:521224KB inactive_file:1012KB active_file:8KB unevictable:0KB
 Memory cgroup out of memory: Kill process 2746 (leaker) score 998 or sacrifice child
 Killed process 2746 (leaker) total-vm:536704kB, anon-rss:521176kB, file-rss:1208kB, shmem-rss:0kB
 oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

[2]

 leaker invoked oom-killer: gfp_mask=0x600040(GFP_NOFS), nodemask=(null), order=0, oom_score_adj=0
 CPU: 1 PID: 2746 Comm: leaker Not tainted 4.18.0+ #20
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
 Call Trace:
  dump_stack+0x63/0x88
  dump_header+0x67/0x27a
  ? mem_cgroup_scan_tasks+0x91/0xf0
  oom_kill_process+0x210/0x410
  out_of_memory+0x109/0x2d0
  mem_cgroup_out_of_memory+0x46/0x80
  try_charge+0x58d/0x650
  ? __radix_tree_replace+0x81/0x100
  mem_cgroup_try_charge+0x7a/0x100
  __add_to_page_cache_locked+0x92/0x180
  add_to_page_cache_lru+0x4d/0xf0
  iomap_readpages_actor+0xde/0x1b0
  ? iomap_zero_range_actor+0x1d0/0x1d0
  iomap_apply+0xaf/0x130
  iomap_readpages+0x9f/0x150
  ? iomap_zero_range_actor+0x1d0/0x1d0
  xfs_vm_readpages+0x18/0x20 [xfs]
  read_pages+0x60/0x140
  __do_page_cache_readahead+0x193/0x1b0
  ondemand_readahead+0x16d/0x2c0
  page_cache_async_readahead+0x9a/0xd0
  filemap_fault+0x403/0x620
  ? alloc_set_pte+0x12c/0x540
  ? _cond_resched+0x14/0x30
  __xfs_filemap_fault+0x66/0x180 [xfs]
  xfs_filemap_fault+0x27/0x30 [xfs]
  __do_fault+0x19/0x40
  __handle_mm_fault+0x8e8/0xb60
  handle_mm_fault+0xfd/0x220
  __do_page_fault+0x238/0x4e0
  do_page_fault+0x22/0x30
  ? page_fault+0x8/0x30
  page_fault+0x1e/0x30
 RIP: 0033:0x4009f0
 Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83
 RSP: 002b:00007ffda45c9290 EFLAGS: 00010206
 RAX: 000000000000001b RBX: 0000000000000000 RCX: 0000000001a1e000
 RDX: 0000000000000000 RSI: 000000007fffffe5 RDI: 0000000000000000
 RBP: 000000000000000c R08: 0000000000000000 R09: 00007f6d061ff20d
 R10: 0000000000000002 R11: 0000000000000246 R12: 00000000000186a0
 R13: 0000000000000003 R14: 00007f6ce59b2000 R15: 0000000002800000
 Task in /leaker killed as a result of limit of /leaker
 memory: usage 524288kB, limit 524288kB, failcnt 7221
 memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0
 kmem: usage 1944kB, limit 9007199254740988kB, failcnt 0
 Memory cgroup stats for /leaker: cache:3632KB rss:518232KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB inactive_anon:0KB active_anon:518408KB inactive_file:3908KB active_file:12KB unevictable:0KB
 Memory cgroup out of memory: Kill process 2746 (leaker) score 992 or sacrifice child
 Killed process 2746 (leaker) total-vm:536704kB, anon-rss:518264kB, file-rss:1188kB, shmem-rss:0kB
 oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

[3]

 leaker invoked oom-killer: gfp_mask=0x50, order=0, oom_score_adj=0
 leaker cpuset=/ mems_allowed=0
 CPU: 1 PID: 3206 Comm: leaker Not tainted 3.10.0-957.27.2.el7.x86_64 #1
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
 Call Trace:
  [<ffffffffaf364147>] dump_stack+0x19/0x1b
  [<ffffffffaf35eb6a>] dump_header+0x90/0x229
  [<ffffffffaedbb456>] ? find_lock_task_mm+0x56/0xc0
  [<ffffffffaee32a38>] ? try_get_mem_cgroup_from_mm+0x28/0x60
  [<ffffffffaedbb904>] oom_kill_process+0x254/0x3d0
  [<ffffffffaee36c36>] mem_cgroup_oom_synchronize+0x546/0x570
  [<ffffffffaee360b0>] ? mem_cgroup_charge_common+0xc0/0xc0
  [<ffffffffaedbc194>] pagefault_out_of_memory+0x14/0x90
  [<ffffffffaf35d072>] mm_fault_error+0x6a/0x157
  [<ffffffffaf3717c8>] __do_page_fault+0x3c8/0x4f0
  [<ffffffffaf371925>] do_page_fault+0x35/0x90
  [<ffffffffaf36d768>] page_fault+0x28/0x30
 Task in /leaker killed as a result of limit of /leaker
 memory: usage 524288kB, limit 524288kB, failcnt 20628
 memory+swap: usage 524288kB, limit 9007199254740988kB, failcnt 0
 kmem: usage 0kB, limit 9007199254740988kB, failcnt 0
 Memory cgroup stats for /leaker: cache:840KB rss:523448KB rss_huge:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:523448KB inactive_file:464KB active_file:376KB unevictable:0KB
 Memory cgroup out of memory: Kill process 3206 (leaker) score 970 or sacrifice child
 Killed process 3206 (leaker) total-vm:536692kB, anon-rss:523304kB, file-rss:412kB, shmem-rss:0kB

Bisected by Masoud Sharbiani.

Link: http://lkml.kernel.org/r/cbe54ed1-b6ba-a056-8899-2dc42526371d@i-love.sakura.ne.jp
Fixes: 3da88fb ("mm, oom: move GFP_NOFS check to out_of_memory") [necessary after 29ef680]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Masoud Sharbiani <msharbiani@apple.com>
Tested-by: Masoud Sharbiani <msharbiani@apple.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel pushed a commit that referenced this pull request Apr 20, 2020
[ Upstream commit 1bc7896 ]

When experimenting with bpf_send_signal() helper in our production
environment (5.2 based), we experienced a deadlock in NMI mode:
   #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24
   #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012
   #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd
   #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55
   #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602
  #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a
  #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227
  #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140
  #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf
  #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09
  #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47
  #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d
  #17 [ffffc9002219fc90] schedule at ffffffff81a3e219
  #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9
  #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529
  #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc
  #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c
  #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602
  #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068

The above call stack is actually very similar to an issue
reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with
rq_lock in bpf_get_stack()") by Song Liu. The only difference is
bpf_send_signal() helper instead of bpf_get_stack() helper.

The above deadlock is triggered with a perf_sw_event.
Similar to Commit eac9153, the below almost identical reproducer
used tracepoint point sched/sched_switch so the issue can be easily caught.
  /* stress_test.c */
  #include <stdio.h>
  #include <stdlib.h>
  #include <sys/mman.h>
  #include <pthread.h>
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>

  #define THREAD_COUNT 1000
  char *filename;
  void *worker(void *p)
  {
        void *ptr;
        int fd;
        char *pptr;

        fd = open(filename, O_RDONLY);
        if (fd < 0)
                return NULL;
        while (1) {
                struct timespec ts = {0, 1000 + rand() % 2000};

                ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
                usleep(1);
                if (ptr == MAP_FAILED) {
                        printf("failed to mmap\n");
                        break;
                }
                munmap(ptr, 4096 * 64);
                usleep(1);
                pptr = malloc(1);
                usleep(1);
                pptr[0] = 1;
                usleep(1);
                free(pptr);
                usleep(1);
                nanosleep(&ts, NULL);
        }
        close(fd);
        return NULL;
  }

  int main(int argc, char *argv[])
  {
        void *ptr;
        int i;
        pthread_t threads[THREAD_COUNT];

        if (argc < 2)
                return 0;

        filename = argv[1];

        for (i = 0; i < THREAD_COUNT; i++) {
                if (pthread_create(threads + i, NULL, worker, NULL)) {
                        fprintf(stderr, "Error creating thread\n");
                        return 0;
                }
        }

        for (i = 0; i < THREAD_COUNT; i++)
                pthread_join(threads[i], NULL);
        return 0;
  }
and the following command:
  1. run `stress_test /bin/ls` in one windown
  2. hack bcc trace.py with the following change:
#     --- a/tools/trace.py
#     +++ b/tools/trace.py
     @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s);
              __data.tgid = __tgid;
              __data.pid = __pid;
              bpf_get_current_comm(&__data.comm, sizeof(__data.comm));
     +        bpf_send_signal(10);
      %s
      %s
              %s.perf_submit(%s, &__data, sizeof(__data));
  3. in a different window run
     ./trace.py -p $(pidof stress_test) t:sched:sched_switch

The deadlock can be reproduced in our production system.

Similar to Song's fix, the fix is to delay sending signal if
irqs is disabled to avoid deadlocks involving with rq_lock.
With this change, my above stress-test in our production system
won't cause deadlock any more.

I also implemented a scale-down version of reproducer in the
selftest (a subsequent commit). With latest bpf-next,
it complains for the following potential deadlock.
  [   32.832450] -> #1 (&p->pi_lock){-.-.}:
  [   32.833100]        _raw_spin_lock_irqsave+0x44/0x80
  [   32.833696]        task_rq_lock+0x2c/0xa0
  [   32.834182]        task_sched_runtime+0x59/0xd0
  [   32.834721]        thread_group_cputime+0x250/0x270
  [   32.835304]        thread_group_cputime_adjusted+0x2e/0x70
  [   32.835959]        do_task_stat+0x8a7/0xb80
  [   32.836461]        proc_single_show+0x51/0xb0
  ...
  [   32.839512] -> #0 (&(&sighand->siglock)->rlock){....}:
  [   32.840275]        __lock_acquire+0x1358/0x1a20
  [   32.840826]        lock_acquire+0xc7/0x1d0
  [   32.841309]        _raw_spin_lock_irqsave+0x44/0x80
  [   32.841916]        __lock_task_sighand+0x79/0x160
  [   32.842465]        do_send_sig_info+0x35/0x90
  [   32.842977]        bpf_send_signal+0xa/0x10
  [   32.843464]        bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000
  [   32.844301]        trace_call_bpf+0x115/0x270
  [   32.844809]        perf_trace_run_bpf_submit+0x4a/0xc0
  [   32.845411]        perf_trace_sched_switch+0x10f/0x180
  [   32.846014]        __schedule+0x45d/0x880
  [   32.846483]        schedule+0x5f/0xd0
  ...

  [   32.853148] Chain exists of:
  [   32.853148]   &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock
  [   32.853148]
  [   32.854451]  Possible unsafe locking scenario:
  [   32.854451]
  [   32.855173]        CPU0                    CPU1
  [   32.855745]        ----                    ----
  [   32.856278]   lock(&rq->lock);
  [   32.856671]                                lock(&p->pi_lock);
  [   32.857332]                                lock(&rq->lock);
  [   32.857999]   lock(&(&sighand->siglock)->rlock);

  Deadlock happens on CPU0 when it tries to acquire &sighand->siglock
  but it has been held by CPU1 and CPU1 tries to grab &rq->lock
  and cannot get it.

  This is not exactly the callstack in our production environment,
  but sympotom is similar and both locks are using spin_lock_irqsave()
  to acquire the lock, and both involves rq_lock. The fix to delay
  sending signal when irq is disabled also fixed this issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ardje pushed a commit to ardje/linux that referenced this pull request Apr 24, 2020
[ no upstream commit ]

Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:

  [...]
  17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  17: (67) r8 <<= 32
  18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
  18: (c7) r8 s>>= 32
  19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  19: (6d) if r1 s> r8 goto pc+16
  [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
  [...]

Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.

For the sake of the test_verifier, it is probably not needed here:

  # ./test_verifier 101
  hardkernel#101/p bpf_get_stack return R0 within range OK
  Summary: 1 PASSED, 0 SKIPPED, 0 FAILED

I haven't seen this issue in test_progs* though, they are passing fine:

  # ./test_progs-no_alu32 -t get_stack
  Switching to flavor 'no_alu32' subdirectory...
  hardkernel#20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t get_stack
  hardkernel#20 get_stack_raw_tp:OK
  Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Sep 15, 2020
[ Upstream commit e24c644 ]

I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Sep 15, 2020
[ Upstream commit ab0db04 ]

When running with -o enospc_debug you can get the following splat if one
of the dump_space_info's trip

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc5+ #20 Tainted: G           OE
  ------------------------------------------------------
  dd/563090 is trying to acquire lock:
  ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs]

  but task is already holding lock:
  ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (&cache->lock){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs]
	 find_free_extent+0x7ef/0x13b0 [btrfs]
	 btrfs_reserve_extent+0x9b/0x180 [btrfs]
	 btrfs_alloc_tree_block+0xc1/0x340 [btrfs]
	 alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
	 __btrfs_cow_block+0x122/0x530 [btrfs]
	 btrfs_cow_block+0x106/0x210 [btrfs]
	 commit_cowonly_roots+0x55/0x300 [btrfs]
	 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
	 sync_filesystem+0x74/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0x14/0x30
	 btrfs_kill_super+0x12/0x20 [btrfs]
	 deactivate_locked_super+0x36/0x70
	 cleanup_mnt+0x104/0x160
	 task_work_run+0x5f/0x90
	 __prepare_exit_to_usermode+0x1bd/0x1c0
	 do_syscall_64+0x5e/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (&space_info->lock){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs]
	 btrfs_inode_rsv_release+0x4f/0x170 [btrfs]
	 btrfs_clear_delalloc_extent+0x155/0x480 [btrfs]
	 clear_state_bit+0x81/0x1a0 [btrfs]
	 __clear_extent_bit+0x25c/0x5d0 [btrfs]
	 clear_extent_bit+0x15/0x20 [btrfs]
	 btrfs_invalidatepage+0x2b7/0x3c0 [btrfs]
	 truncate_cleanup_page+0x47/0xe0
	 truncate_inode_pages_range+0x238/0x840
	 truncate_pagecache+0x44/0x60
	 btrfs_setattr+0x202/0x5e0 [btrfs]
	 notify_change+0x33b/0x490
	 do_truncate+0x76/0xd0
	 path_openat+0x687/0xa10
	 do_filp_open+0x91/0x100
	 do_sys_openat2+0x215/0x2d0
	 do_sys_open+0x44/0x80
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&tree->lock#2){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 find_first_extent_bit+0x32/0x150 [btrfs]
	 write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs]
	 __btrfs_write_out_cache+0x172/0x480 [btrfs]
	 btrfs_write_out_cache+0x7a/0xf0 [btrfs]
	 btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs]
	 commit_cowonly_roots+0x245/0x300 [btrfs]
	 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
	 close_ctree+0xf9/0x2f5 [btrfs]
	 generic_shutdown_super+0x6c/0x100
	 kill_anon_super+0x14/0x30
	 btrfs_kill_super+0x12/0x20 [btrfs]
	 deactivate_locked_super+0x36/0x70
	 cleanup_mnt+0x104/0x160
	 task_work_run+0x5f/0x90
	 __prepare_exit_to_usermode+0x1bd/0x1c0
	 do_syscall_64+0x5e/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&ctl->tree_lock){+.+.}-{2:2}:
	 __lock_acquire+0x1240/0x2460
	 lock_acquire+0xab/0x360
	 _raw_spin_lock+0x25/0x30
	 btrfs_dump_free_space+0x2b/0xa0 [btrfs]
	 btrfs_dump_space_info+0xf4/0x120 [btrfs]
	 btrfs_reserve_extent+0x176/0x180 [btrfs]
	 __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
	 cache_save_setup+0x28d/0x3b0 [btrfs]
	 btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
	 btrfs_commit_transaction+0xcc/0xac0 [btrfs]
	 btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
	 btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
	 btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
	 btrfs_file_write_iter+0x3cf/0x610 [btrfs]
	 new_sync_write+0x11e/0x1b0
	 vfs_write+0x1c9/0x200
	 ksys_write+0x68/0xe0
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &ctl->tree_lock --> &space_info->lock --> &cache->lock

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&cache->lock);
				 lock(&space_info->lock);
				 lock(&cache->lock);
    lock(&ctl->tree_lock);

   *** DEADLOCK ***

  6 locks held by dd/563090:
   #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200
   #1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs]
   #2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs]
   #3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs]
   #4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs]
   #5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  stack backtrace:
  CPU: 3 PID: 563090 Comm: dd Tainted: G           OE     5.8.0-rc5+ #20
  Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
  Call Trace:
   dump_stack+0x96/0xd0
   check_noncircular+0x162/0x180
   __lock_acquire+0x1240/0x2460
   ? wake_up_klogd.part.0+0x30/0x40
   lock_acquire+0xab/0x360
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   _raw_spin_lock+0x25/0x30
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_space_info+0xf4/0x120 [btrfs]
   btrfs_reserve_extent+0x176/0x180 [btrfs]
   __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
   ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs]
   cache_save_setup+0x28d/0x3b0 [btrfs]
   btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
   btrfs_commit_transaction+0xcc/0xac0 [btrfs]
   ? start_transaction+0xe0/0x5b0 [btrfs]
   btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
   btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
   btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
   ? ktime_get_coarse_real_ts64+0xa8/0xd0
   ? trace_hardirqs_on+0x1c/0xe0
   btrfs_file_write_iter+0x3cf/0x610 [btrfs]
   new_sync_write+0x11e/0x1b0
   vfs_write+0x1c9/0x200
   ksys_write+0x68/0xe0
   do_syscall_64+0x52/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is because we're holding the block_group->lock while trying to dump
the free space cache.  However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Sep 15, 2020
commit 01d01ca upstream.

We are currently getting this lockdep splat in btrfs/161:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc5+ #20 Tainted: G            E
  ------------------------------------------------------
  mount/678048 is trying to acquire lock:
  ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]

  but task is already holding lock:
  ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x8b/0x8f0
	 btrfs_init_new_device+0x2d2/0x1240 [btrfs]
	 btrfs_ioctl+0x1de/0x2d20 [btrfs]
	 ksys_ioctl+0x87/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __lock_acquire+0x1240/0x2460
	 lock_acquire+0xab/0x360
	 __mutex_lock+0x8b/0x8f0
	 clone_fs_devices+0x4d/0x170 [btrfs]
	 btrfs_read_chunk_tree+0x330/0x800 [btrfs]
	 open_ctree+0xb7c/0x18ce [btrfs]
	 btrfs_mount_root.cold+0x13/0xfa [btrfs]
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 fc_mount+0xe/0x40
	 vfs_kern_mount.part.0+0x71/0x90
	 btrfs_mount+0x13b/0x3e0 [btrfs]
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 do_mount+0x7de/0xb30
	 __x64_sys_mount+0x8e/0xd0
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_info->chunk_mutex);
				 lock(&fs_devs->device_list_mutex);
				 lock(&fs_info->chunk_mutex);
    lock(&fs_devs->device_list_mutex);

   *** DEADLOCK ***

  3 locks held by mount/678048:
   #0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
   #1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
   #2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]

  stack backtrace:
  CPU: 2 PID: 678048 Comm: mount Tainted: G            E     5.8.0-rc5+ #20
  Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
  Call Trace:
   dump_stack+0x96/0xd0
   check_noncircular+0x162/0x180
   __lock_acquire+0x1240/0x2460
   ? asm_sysvec_apic_timer_interrupt+0x12/0x20
   lock_acquire+0xab/0x360
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   __mutex_lock+0x8b/0x8f0
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   ? rcu_read_lock_sched_held+0x52/0x60
   ? cpumask_next+0x16/0x20
   ? module_assert_mutex_or_preempt+0x14/0x40
   ? __module_address+0x28/0xf0
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   ? static_obj+0x4f/0x60
   ? lockdep_init_map_waits+0x43/0x200
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   clone_fs_devices+0x4d/0x170 [btrfs]
   btrfs_read_chunk_tree+0x330/0x800 [btrfs]
   open_ctree+0xb7c/0x18ce [btrfs]
   ? super_setup_bdi_name+0x79/0xd0
   btrfs_mount_root.cold+0x13/0xfa [btrfs]
   ? vfs_parse_fs_string+0x84/0xb0
   ? rcu_read_lock_sched_held+0x52/0x60
   ? kfree+0x2b5/0x310
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   fc_mount+0xe/0x40
   vfs_kern_mount.part.0+0x71/0x90
   btrfs_mount+0x13b/0x3e0 [btrfs]
   ? cred_has_capability+0x7c/0x120
   ? rcu_read_lock_sched_held+0x52/0x60
   ? legacy_get_tree+0x30/0x50
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   do_mount+0x7de/0xb30
   ? memdup_user+0x4e/0x90
   __x64_sys_mount+0x8e/0xd0
   do_syscall_64+0x52/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex.  The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem.  We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.

An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
paralin pushed a commit to paralin/linux that referenced this pull request Sep 22, 2020
[ Upstream commit ab0db04 ]

When running with -o enospc_debug you can get the following splat if one
of the dump_space_info's trip

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc5+ hardkernel#20 Tainted: G           OE
  ------------------------------------------------------
  dd/563090 is trying to acquire lock:
  ffff9e7dbf4f1e18 (&ctl->tree_lock){+.+.}-{2:2}, at: btrfs_dump_free_space+0x2b/0xa0 [btrfs]

  but task is already holding lock:
  ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> hardkernel#3 (&cache->lock){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 btrfs_add_reserved_bytes+0x3c/0x3c0 [btrfs]
	 find_free_extent+0x7ef/0x13b0 [btrfs]
	 btrfs_reserve_extent+0x9b/0x180 [btrfs]
	 btrfs_alloc_tree_block+0xc1/0x340 [btrfs]
	 alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
	 __btrfs_cow_block+0x122/0x530 [btrfs]
	 btrfs_cow_block+0x106/0x210 [btrfs]
	 commit_cowonly_roots+0x55/0x300 [btrfs]
	 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
	 sync_filesystem+0x74/0x90
	 generic_shutdown_super+0x22/0x100
	 kill_anon_super+0x14/0x30
	 btrfs_kill_super+0x12/0x20 [btrfs]
	 deactivate_locked_super+0x36/0x70
	 cleanup_mnt+0x104/0x160
	 task_work_run+0x5f/0x90
	 __prepare_exit_to_usermode+0x1bd/0x1c0
	 do_syscall_64+0x5e/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> hardkernel#2 (&space_info->lock){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 btrfs_block_rsv_release+0x1a6/0x3f0 [btrfs]
	 btrfs_inode_rsv_release+0x4f/0x170 [btrfs]
	 btrfs_clear_delalloc_extent+0x155/0x480 [btrfs]
	 clear_state_bit+0x81/0x1a0 [btrfs]
	 __clear_extent_bit+0x25c/0x5d0 [btrfs]
	 clear_extent_bit+0x15/0x20 [btrfs]
	 btrfs_invalidatepage+0x2b7/0x3c0 [btrfs]
	 truncate_cleanup_page+0x47/0xe0
	 truncate_inode_pages_range+0x238/0x840
	 truncate_pagecache+0x44/0x60
	 btrfs_setattr+0x202/0x5e0 [btrfs]
	 notify_change+0x33b/0x490
	 do_truncate+0x76/0xd0
	 path_openat+0x687/0xa10
	 do_filp_open+0x91/0x100
	 do_sys_openat2+0x215/0x2d0
	 do_sys_open+0x44/0x80
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> hardkernel#1 (&tree->lock#2){+.+.}-{2:2}:
	 _raw_spin_lock+0x25/0x30
	 find_first_extent_bit+0x32/0x150 [btrfs]
	 write_pinned_extent_entries.isra.0+0xc5/0x100 [btrfs]
	 __btrfs_write_out_cache+0x172/0x480 [btrfs]
	 btrfs_write_out_cache+0x7a/0xf0 [btrfs]
	 btrfs_write_dirty_block_groups+0x286/0x3b0 [btrfs]
	 commit_cowonly_roots+0x245/0x300 [btrfs]
	 btrfs_commit_transaction+0x4ed/0xac0 [btrfs]
	 close_ctree+0xf9/0x2f5 [btrfs]
	 generic_shutdown_super+0x6c/0x100
	 kill_anon_super+0x14/0x30
	 btrfs_kill_super+0x12/0x20 [btrfs]
	 deactivate_locked_super+0x36/0x70
	 cleanup_mnt+0x104/0x160
	 task_work_run+0x5f/0x90
	 __prepare_exit_to_usermode+0x1bd/0x1c0
	 do_syscall_64+0x5e/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&ctl->tree_lock){+.+.}-{2:2}:
	 __lock_acquire+0x1240/0x2460
	 lock_acquire+0xab/0x360
	 _raw_spin_lock+0x25/0x30
	 btrfs_dump_free_space+0x2b/0xa0 [btrfs]
	 btrfs_dump_space_info+0xf4/0x120 [btrfs]
	 btrfs_reserve_extent+0x176/0x180 [btrfs]
	 __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
	 cache_save_setup+0x28d/0x3b0 [btrfs]
	 btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
	 btrfs_commit_transaction+0xcc/0xac0 [btrfs]
	 btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
	 btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
	 btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
	 btrfs_file_write_iter+0x3cf/0x610 [btrfs]
	 new_sync_write+0x11e/0x1b0
	 vfs_write+0x1c9/0x200
	 ksys_write+0x68/0xe0
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &ctl->tree_lock --> &space_info->lock --> &cache->lock

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&cache->lock);
				 lock(&space_info->lock);
				 lock(&cache->lock);
    lock(&ctl->tree_lock);

   *** DEADLOCK ***

  6 locks held by dd/563090:
   #0: ffff9e7e21d18448 (sb_writers#14){.+.+}-{0:0}, at: vfs_write+0x195/0x200
   hardkernel#1: ffff9e7dd0410ed8 (&sb->s_type->i_mutex_key#19){++++}-{3:3}, at: btrfs_file_write_iter+0x86/0x610 [btrfs]
   hardkernel#2: ffff9e7e21d18638 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40b/0x5b0 [btrfs]
   hardkernel#3: ffff9e7e1f05d688 (&cur_trans->cache_write_mutex){+.+.}-{3:3}, at: btrfs_start_dirty_block_groups+0x158/0x4f0 [btrfs]
   hardkernel#4: ffff9e7e2284ddb8 (&space_info->groups_sem){++++}-{3:3}, at: btrfs_dump_space_info+0x69/0x120 [btrfs]
   hardkernel#5: ffff9e7e2284d428 (&cache->lock){+.+.}-{2:2}, at: btrfs_dump_space_info+0xaa/0x120 [btrfs]

  stack backtrace:
  CPU: 3 PID: 563090 Comm: dd Tainted: G           OE     5.8.0-rc5+ hardkernel#20
  Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
  Call Trace:
   dump_stack+0x96/0xd0
   check_noncircular+0x162/0x180
   __lock_acquire+0x1240/0x2460
   ? wake_up_klogd.part.0+0x30/0x40
   lock_acquire+0xab/0x360
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   _raw_spin_lock+0x25/0x30
   ? btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_free_space+0x2b/0xa0 [btrfs]
   btrfs_dump_space_info+0xf4/0x120 [btrfs]
   btrfs_reserve_extent+0x176/0x180 [btrfs]
   __btrfs_prealloc_file_range+0x145/0x550 [btrfs]
   ? btrfs_qgroup_reserve_data+0x1d/0x60 [btrfs]
   cache_save_setup+0x28d/0x3b0 [btrfs]
   btrfs_start_dirty_block_groups+0x1fc/0x4f0 [btrfs]
   btrfs_commit_transaction+0xcc/0xac0 [btrfs]
   ? start_transaction+0xe0/0x5b0 [btrfs]
   btrfs_alloc_data_chunk_ondemand+0x162/0x4c0 [btrfs]
   btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
   btrfs_buffered_write.isra.0+0x19b/0x740 [btrfs]
   ? ktime_get_coarse_real_ts64+0xa8/0xd0
   ? trace_hardirqs_on+0x1c/0xe0
   btrfs_file_write_iter+0x3cf/0x610 [btrfs]
   new_sync_write+0x11e/0x1b0
   vfs_write+0x1c9/0x200
   ksys_write+0x68/0xe0
   do_syscall_64+0x52/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is because we're holding the block_group->lock while trying to dump
the free space cache.  However we don't need this lock, we just need it
to read the values for the printk, so move the free space cache dumping
outside of the block group lock.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
paralin pushed a commit to paralin/linux that referenced this pull request Sep 22, 2020
commit 01d01ca upstream.

We are currently getting this lockdep splat in btrfs/161:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc5+ hardkernel#20 Tainted: G            E
  ------------------------------------------------------
  mount/678048 is trying to acquire lock:
  ffff9b769f15b6e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: clone_fs_devices+0x4d/0x170 [btrfs]

  but task is already holding lock:
  ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> hardkernel#1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
	 __mutex_lock+0x8b/0x8f0
	 btrfs_init_new_device+0x2d2/0x1240 [btrfs]
	 btrfs_ioctl+0x1de/0x2d20 [btrfs]
	 ksys_ioctl+0x87/0xc0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
	 __lock_acquire+0x1240/0x2460
	 lock_acquire+0xab/0x360
	 __mutex_lock+0x8b/0x8f0
	 clone_fs_devices+0x4d/0x170 [btrfs]
	 btrfs_read_chunk_tree+0x330/0x800 [btrfs]
	 open_ctree+0xb7c/0x18ce [btrfs]
	 btrfs_mount_root.cold+0x13/0xfa [btrfs]
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 fc_mount+0xe/0x40
	 vfs_kern_mount.part.0+0x71/0x90
	 btrfs_mount+0x13b/0x3e0 [btrfs]
	 legacy_get_tree+0x30/0x50
	 vfs_get_tree+0x28/0xc0
	 do_mount+0x7de/0xb30
	 __x64_sys_mount+0x8e/0xd0
	 do_syscall_64+0x52/0xb0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

   Possible unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(&fs_info->chunk_mutex);
				 lock(&fs_devs->device_list_mutex);
				 lock(&fs_info->chunk_mutex);
    lock(&fs_devs->device_list_mutex);

   *** DEADLOCK ***

  3 locks held by mount/678048:
   #0: ffff9b75ff5fb0e0 (&type->s_umount_key#63/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
   hardkernel#1: ffffffffc0c2fbc8 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x54/0x800 [btrfs]
   hardkernel#2: ffff9b76abdb08d0 (&fs_info->chunk_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x6a/0x800 [btrfs]

  stack backtrace:
  CPU: 2 PID: 678048 Comm: mount Tainted: G            E     5.8.0-rc5+ hardkernel#20
  Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./890FX Deluxe5, BIOS P1.40 05/03/2011
  Call Trace:
   dump_stack+0x96/0xd0
   check_noncircular+0x162/0x180
   __lock_acquire+0x1240/0x2460
   ? asm_sysvec_apic_timer_interrupt+0x12/0x20
   lock_acquire+0xab/0x360
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   __mutex_lock+0x8b/0x8f0
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   ? rcu_read_lock_sched_held+0x52/0x60
   ? cpumask_next+0x16/0x20
   ? module_assert_mutex_or_preempt+0x14/0x40
   ? __module_address+0x28/0xf0
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   ? static_obj+0x4f/0x60
   ? lockdep_init_map_waits+0x43/0x200
   ? clone_fs_devices+0x4d/0x170 [btrfs]
   clone_fs_devices+0x4d/0x170 [btrfs]
   btrfs_read_chunk_tree+0x330/0x800 [btrfs]
   open_ctree+0xb7c/0x18ce [btrfs]
   ? super_setup_bdi_name+0x79/0xd0
   btrfs_mount_root.cold+0x13/0xfa [btrfs]
   ? vfs_parse_fs_string+0x84/0xb0
   ? rcu_read_lock_sched_held+0x52/0x60
   ? kfree+0x2b5/0x310
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   fc_mount+0xe/0x40
   vfs_kern_mount.part.0+0x71/0x90
   btrfs_mount+0x13b/0x3e0 [btrfs]
   ? cred_has_capability+0x7c/0x120
   ? rcu_read_lock_sched_held+0x52/0x60
   ? legacy_get_tree+0x30/0x50
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   do_mount+0x7de/0xb30
   ? memdup_user+0x4e/0x90
   __x64_sys_mount+0x8e/0xd0
   do_syscall_64+0x52/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is because btrfs_read_chunk_tree() can come upon DEV_EXTENT's and
then read the device, which takes the device_list_mutex.  The
device_list_mutex needs to be taken before the chunk_mutex, so this is a
problem.  We only really need the chunk mutex around adding the chunk,
so move the mutex around read_one_chunk.

An argument could be made that we don't even need the chunk_mutex here
as it's during mount, and we are protected by various other locks.
However we already have special rules for ->device_list_mutex, and I'd
rather not have another special case for ->chunk_mutex.

CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Aug 17, 2021
commit 4d14c5c upstream

Calling btrfs_qgroup_reserve_meta_prealloc from
btrfs_delayed_inode_reserve_metadata can result in flushing delalloc
while holding a transaction and delayed node locks. This is deadlock
prone. In the past multiple commits:

 * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're
already holding a transaction")

 * 6f23277 ("btrfs: qgroup: don't commit transaction when we already
 hold the handle")

Tried to solve various aspects of this but this was always a
whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock
scenario involving btrfs_delayed_node::mutex. Namely, one thread
can call btrfs_dirty_inode as a result of reading a file and modifying
its atime:

  PID: 6963   TASK: ffff8c7f3f94c000  CPU: 2   COMMAND: "test"
  #0  __schedule at ffffffffa529e07d
  #1  schedule at ffffffffa529e4ff
  #2  schedule_timeout at ffffffffa52a1bdd
  #3  wait_for_completion at ffffffffa529eeea             <-- sleeps with delayed node mutex held
  #4  start_delalloc_inodes at ffffffffc0380db5
  #5  btrfs_start_delalloc_snapshot at ffffffffc0393836
  #6  try_flush_qgroup at ffffffffc03f04b2
  #7  __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6     <-- tries to reserve space and starts delalloc inodes.
  #8  btrfs_delayed_update_inode at ffffffffc03e31aa      <-- acquires delayed node mutex
  #9  btrfs_update_inode at ffffffffc0385ba8
 #10  btrfs_dirty_inode at ffffffffc038627b               <-- TRANSACTIION OPENED
 #11  touch_atime at ffffffffa4cf0000
 #12  generic_file_read_iter at ffffffffa4c1f123
 #13  new_sync_read at ffffffffa4ccdc8a
 #14  vfs_read at ffffffffa4cd0849
 #15  ksys_read at ffffffffa4cd0bd1
 #16  do_syscall_64 at ffffffffa4a052eb
 #17  entry_SYSCALL_64_after_hwframe at ffffffffa540008c

This will cause an asynchronous work to flush the delalloc inodes to
happen which can try to acquire the same delayed_node mutex:

  PID: 455    TASK: ffff8c8085fa4000  CPU: 5   COMMAND: "kworker/u16:30"
  #0  __schedule at ffffffffa529e07d
  #1  schedule at ffffffffa529e4ff
  #2  schedule_preempt_disabled at ffffffffa529e80a
  #3  __mutex_lock at ffffffffa529fdcb                    <-- goes to sleep, never wakes up.
  #4  btrfs_delayed_update_inode at ffffffffc03e3143      <-- tries to acquire the mutex
  #5  btrfs_update_inode at ffffffffc0385ba8              <-- this is the same inode that pid 6963 is holding
  #6  cow_file_range_inline.constprop.78 at ffffffffc0386be7
  #7  cow_file_range at ffffffffc03879c1
  #8  btrfs_run_delalloc_range at ffffffffc038894c
  #9  writepage_delalloc at ffffffffc03a3c8f
 #10  __extent_writepage at ffffffffc03a4c01
 #11  extent_write_cache_pages at ffffffffc03a500b
 #12  extent_writepages at ffffffffc03a6de2
 #13  do_writepages at ffffffffa4c277eb
 #14  __filemap_fdatawrite_range at ffffffffa4c1e5bb
 #15  btrfs_run_delalloc_work at ffffffffc0380987         <-- starts running delayed nodes
 #16  normal_work_helper at ffffffffc03b706c
 #17  process_one_work at ffffffffa4aba4e4
 #18  worker_thread at ffffffffa4aba6fd
 #19  kthread at ffffffffa4ac0a3d
 #20  ret_from_fork at ffffffffa54001ff

To fully address those cases the complete fix is to never issue any
flushing while holding the transaction or the delayed node lock. This
patch achieves it by calling qgroup_reserve_meta directly which will
either succeed without flushing or will fail and return -EDQUOT. In the
latter case that return value is going to be propagated to
btrfs_dirty_inode which will fallback to start a new transaction. That's
fine as the majority of time we expect the inode will have
BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly
copying the in-memory state.

Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Dec 9, 2021
[ Upstream commit 39fbef4 ]

The following kernel crash can be triggered:

[   89.266592] ------------[ cut here ]------------
[   89.267427] kernel BUG at fs/buffer.c:3020!
[   89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[   89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[   89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[   89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246
[   89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612
[   89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498
[   89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294
[   89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800
[   89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000
[   89.284342] FS:  0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000
[   89.285711] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0
[   89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   89.290368] Call Trace:
[   89.290842]  write_mmp_block+0x2ca/0x510
[   89.292218]  kmmpd+0x433/0x9a0
[   89.294902]  kthread+0x2dd/0x3e0
[   89.296268]  ret_from_fork+0x22/0x30
[   89.296906] Modules linked in:

by running the following commands:

 1. mkfs.ext4 -O mmp  /dev/sda -b 1024
 2. mount /dev/sda /home/test
 3. echo "/dev/sda" > /sys/power/resume

That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:

       Thread1                       Thread2
mount /dev/sda /home/test
get s_mmp_bh  --> has mapped flag
start kmmpd thread
				echo "/dev/sda" > /sys/power/resume
				  resume_store
				    software_resume
				      swsusp_check
				        set_blocksize
					  truncate_inode_pages_range
					    truncate_cleanup_page
					      block_invalidatepage
					        discard_buffer --> clean mapped flag
write_mmp_block
  submit_bh
    submit_bh_wbc
      BUG_ON(!buffer_mapped(bh))

To address this issue, modify swsusp_check() to open the target block
device with exclusive access.

Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
paralin pushed a commit to paralin/linux that referenced this pull request Mar 11, 2022
commit 8b59b0a upstream.

arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be simulated by constructing
assembly functions. therefore, before executing instruction
simulation, it is necessary to construct assembly function
execution environment in C language through binding registers.
after kasan is enabled, the register binding relationship will
be destroyed, resulting in instruction simulation errors and
causing kernel panic.

the kprobe emulate instruction function is distributed in three
files: actions-common.c actions-arm.c actions-thumb.c, so disable
KASAN when compiling these files.

for example, use kprobe insert on cap_capable+20 after kasan
enabled, the cap_capable assembly code is as follows:
<cap_capable>:
e92d47f0	push	{r4, r5, r6, r7, r8, r9, sl, lr}
e1a05000	mov	r5, r0
e280006c	add	r0, r0, hardkernel#108    ; 0x6c
e1a04001	mov	r4, r1
e1a06002	mov	r6, r2
e59fa090	ldr	sl, [pc, hardkernel#144]  ;
ebfc7bf8	bl	c03aa4b4 <__asan_load4>
e595706c	ldr	r7, [r5, hardkernel#108]  ; 0x6c
e2859014	add	r9, r5, hardkernel#20
......
The emulate_ldr assembly code after enabling kasan is as follows:
c06f1384 <emulate_ldr>:
e92d47f0	push	{r4, r5, r6, r7, r8, r9, sl, lr}
e282803c	add	r8, r2, hardkernel#60     ; 0x3c
e1a05000	mov	r5, r0
e7e37855	ubfx	r7, r5, hardkernel#16, hardkernel#4
e1a00008	mov	r0, r8
e1a09001	mov	r9, r1
e1a04002	mov	r4, r2
ebf35462	bl	c03c6530 <__asan_load4>
e357000f	cmp	r7, hardkernel#15
e7e36655	ubfx	r6, r5, hardkernel#12, hardkernel#4
e205a00f	and	sl, r5, hardkernel#15
0a000001	beq	c06f13bc <emulate_ldr+0x38>
e0840107	add	r0, r4, r7, lsl hardkernel#2
ebf3545c	bl	c03c6530 <__asan_load4>
e084010a	add	r0, r4, sl, lsl hardkernel#2
ebf3545a	bl	c03c6530 <__asan_load4>
e2890010	add	r0, r9, hardkernel#16
ebf35458	bl	c03c6530 <__asan_load4>
e5990010	ldr	r0, [r9, hardkernel#16]
e12fff30	blx	r0
e356000f	cm	r6, hardkernel#15
1a000014	bne	c06f1430 <emulate_ldr+0xac>
e1a06000	mov	r6, r0
e2840040	add	r0, r4, hardkernel#64     ; 0x40
......

when running in emulate_ldr to simulate the ldr instruction, panic
occurred, and the log is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
00000090
pgd = ecb46400
[00000090] *pgd=2e0fa003, *pmd=00000000
Internal error: Oops: 206 [hardkernel#1] SMP ARM
PC is at cap_capable+0x14/0xb0
LR is at emulate_ldr+0x50/0xc0
psr: 600d0293 sp : ecd63af8  ip : 00000004  fp : c0a7c30c
r10: 00000000  r9 : c30897f4  r8 : ecd63cd4
r7 : 0000000f  r6 : 0000000a  r5 : e59fa090  r4 : ecd63c98
r3 : c06ae294  r2 : 00000000  r1 : b7611300  r0 : bf4ec008
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 32c5387d  Table: 2d546400  DAC: 55555555
Process bash (pid: 1643, stack limit = 0xecd60190)
(cap_capable) from (kprobe_handler+0x218/0x340)
(kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
(kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
(do_undefinstr) from (__und_svc_finish+0x0/0x30)
(__und_svc_finish) from (cap_capable+0x18/0xb0)
(cap_capable) from (cap_vm_enough_memory+0x38/0x48)
(cap_vm_enough_memory) from
(security_vm_enough_memory_mm+0x48/0x6c)
(security_vm_enough_memory_mm) from
(copy_process.constprop.5+0x16b4/0x25c8)
(copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
(_do_fork) from (SyS_clone+0x1c/0x24)
(SyS_clone) from (__sys_trace_return+0x0/0x10)
Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)

Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support")
Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM")
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Jun 19, 2022
[ Upstream commit 4224cfd ]

When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Jun 21, 2023
…_write()

[ Upstream commit 2d1e952 ]

If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.

This issue is not theoretical.  I managed to author a POC for it:

    BUG: KASAN: double-free in kfree+0x5c/0xac
    Free of addr ffff29280be5de00 by task poc/356
    CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
    Hardware name: linux,dummy-virt (DT)
    Call trace:
     dump_backtrace.part.0+0xe0/0xf0
     show_stack+0x18/0x40
     dump_stack_lvl+0x64/0x80
     print_report+0x188/0x48c
     kasan_report_invalid_free+0xa0/0xc0
     ____kasan_slab_free+0x174/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Allocated by task 356:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_alloc_info+0x24/0x34
     __kasan_kmalloc+0xb8/0xc0
     kmalloc_trace+0x58/0x70
     mbox_test_message_write+0x6c/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Freed by task 357:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_free_info+0x38/0x5c
     ____kasan_slab_free+0x13c/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Sep 29, 2023
commit 0b0747d upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Oct 16, 2023
[ Upstream commit c777b11 ]

Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in
kobject_add_internal() in kobject_init_and_add() in mdev_type_add()
in parent_create_sysfs_files(), it will return 0 and probe successfully.
And when rmmod mdpy.ko, the mdpy_dev_exit() will call
mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized
parent->types[i] in parent_remove_sysfs_files(), and it will cause
below null-ptr-deref.

If mdev_type_add() fails, return the error code and kset_unregister()
to fix the issue.

 general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
 CPU: 2 PID: 10215 Comm: rmmod Tainted: G        W        N 6.6.0-rc2+ #20
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 RIP: 0010:__kobject_del+0x62/0x1c0
 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
 FS:  00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0
 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea
 DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? die_addr+0x3d/0xa0
  ? exc_general_protection+0x144/0x220
  ? asm_exc_general_protection+0x22/0x30
  ? __kobject_del+0x62/0x1c0
  kobject_del+0x32/0x50
  parent_remove_sysfs_files+0xd6/0x170 [mdev]
  mdev_unregister_parent+0xfb/0x190 [mdev]
  ? mdev_register_parent+0x270/0x270 [mdev]
  ? find_module_all+0x9d/0xe0
  mdpy_dev_exit+0x17/0x63 [mdpy]
  __do_sys_delete_module.constprop.0+0x2fa/0x4b0
  ? module_flags+0x300/0x300
  ? __fput+0x4e7/0xa00
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 RIP: 0033:0x7fbc813221b7
 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7
 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58
 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000
 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870
 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0
  </TASK>
 Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy]
 Dumping ftrace buffer:
    (ftrace buffer empty)
 ---[ end trace 0000000000000000 ]---
 RIP: 0010:__kobject_del+0x62/0x1c0
 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8
 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202
 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010
 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1
 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000
 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660
 FS:  00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0
 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea
 DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600
 PKRU: 55555554
 Kernel panic - not syncing: Fatal exception
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Kernel Offset: disabled
 Rebooting in 1 seconds..

Fixes: da44c34 ("vfio/mdev: simplify mdev_type handling")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230918115551.1423193-1-ruanjinjie@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Oct 16, 2023
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Nov 7, 2023
commit 0b0747d upstream.

The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.

  PID: 17360    TASK: ffff95c1090c5c40  CPU: 41  COMMAND: "mrdiagd"
  !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
  !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
  !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
   # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
   # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
   # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
   # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
   # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
   # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
   # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
   #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
   #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
   #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
   #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
   #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
   #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
   #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
   #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
   #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
   #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

  PID: 17355    TASK: ffff95c1090c3d80  CPU: 29  COMMAND: "mrdiagd"
  !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
  !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
   # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
   # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
   # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
   # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
   # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
   # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
   # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
   # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
   #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
   #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
   #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
   #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
   #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
   #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
   #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
   #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0

The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Nov 7, 2023
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Dec 19, 2023
[ Upstream commit e3e82fc ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   #3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   #15 [ffff88aa841efb88] device_del at ffffffff82179d23
   #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   #20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn
Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com>
Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Jun 11, 2024
commit a5b862c upstream.

l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.

Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.

divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G        W          6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS:  0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 <TASK>
 l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
 l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
 l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
 l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
 hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
 process_one_work kernel/workqueue.c:3254 [inline]
 process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
 worker_thread+0x926/0xe70 kernel/workqueue.c:3416
 kthread+0x2e3/0x380 kernel/kthread.c:388
 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fixes: 6ed58ec ("Bluetooth: Use LE buffers for LE traffic")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Jun 24, 2024
[ Upstream commit 769e6a1 ]

ui_browser__show() is capturing the input title that is stack allocated
memory in hist_browser__run().

Avoid a use after return by strdup-ing the string.

Committer notes:

Further explanation from Ian Rogers:

My command line using tui is:
$ sudo bash -c 'rm /tmp/asan.log*; export
ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a
sleep 1; /tmp/perf/perf mem report'
I then go to the perf annotate view and quit. This triggers the asan
error (from the log file):
```
==1254591==ERROR: AddressSanitizer: stack-use-after-return on address
0x7f2813331920 at pc 0x7f28180
65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10
READ of size 80 at 0x7f2813331920 thread T0
    #0 0x7f2818065990 in __interceptor_strlen
../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461
    #1 0x7f2817698251 in SLsmg_write_wrapped_string
(/lib/x86_64-linux-gnu/libslang.so.2+0x98251)
    #2 0x7f28176984b9 in SLsmg_write_nstring
(/lib/x86_64-linux-gnu/libslang.so.2+0x984b9)
    #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60
    #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266
    #5 0x55c94045c776 in ui_browser__show ui/browser.c:288
    #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206
    #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458
    #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412
    #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527
    #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613
    #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661
    #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671
    #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141
    #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805
    #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374
    #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516
    #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350
    #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403
    #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447
    #20 0x55c9400e53ad in main tools/perf/perf.c:561
    #21 0x7f28170456c9 in __libc_start_call_main
../sysdeps/nptl/libc_start_call_main.h:58
    #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360
    #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId:
84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93)

Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame
    #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746

  This frame has 1 object(s):
    [32, 192) 'title' (line 747) <== Memory access at offset 32 is
inside this variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism, swapcontext or vfork
```
hist_browser__run isn't on the stack so the asan error looks legit.
There's no clean init/exit on struct ui_browser so I may be trading a
use-after-return for a memory leak, but that seems look a good trade
anyway.

Fixes: 05e8b08 ("perf ui browser: Stop using 'self'")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Jul 15, 2024
commit be346c1 upstream.

The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  #1 __crash_kexec at ffffffff8c1338fa
  #2 panic at ffffffff8c1d69b9
  #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
#11 dio_complete at ffffffff8c2b9fa7
#12 do_blockdev_direct_IO at ffffffff8c2bc09f
#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
#14 generic_file_direct_write at ffffffff8c1dcf14
#15 __generic_file_write_iter at ffffffff8c1dd07b
#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
#17 aio_write at ffffffff8c2cc72e
#18 kmem_cache_alloc at ffffffff8c248dde
#19 do_io_submit at ffffffff8c2ccada
#20 do_syscall_64 at ffffffff8c004984
#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Jul 15, 2024
commit bab4923 upstream.

In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from

 qdisc->dev_queue->dev <NULL> ->name

This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.

During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.

I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.

 https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740

Yeoreum and I use two fuzzing tool simultaneously.

One process with syz-executor : https://github.com/google/syzkaller

 $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \
    -enable=none -collide=false log1

The other process with perf fuzzer:
 https://github.com/deater/perf_event_tests/tree/master/fuzzer

 $ perf_event_tests/fuzzer/perf_fuzzer

I think this will happen on the kernel version.

 Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10.

This occurred from 51270d5. I think this patch is absolutely
necessary. Previously, It was showing not intended string value of name.

I've reproduced 3 time from my fedora 40 Debug Kernel with any other module
or patched.

 version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug

[ 5287.164555] veth0_vlan: left promiscuous mode
[ 5287.164929] veth1_macvtap: left promiscuous mode
[ 5287.164950] veth0_macvtap: left promiscuous mode
[ 5287.164983] veth1_vlan: left promiscuous mode
[ 5287.165008] veth0_vlan: left promiscuous mode
[ 5287.165450] veth1_macvtap: left promiscuous mode
[ 5287.165472] veth0_macvtap: left promiscuous mode
[ 5287.165502] veth1_vlan: left promiscuous mode
…
[ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state
[ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state
[ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0
[ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state
…
[ 5298.002798] bridge_slave_0: left promiscuous mode
[ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[ 5298.320207] bond0 (unregistering): Released all slaves
[ 5298.354296] hsr_slave_0: left promiscuous mode
[ 5298.360750] hsr_slave_1: left promiscuous mode
[ 5298.374889] veth1_macvtap: left promiscuous mode
[ 5298.374931] veth0_macvtap: left promiscuous mode
[ 5298.374988] veth1_vlan: left promiscuous mode
[ 5298.375024] veth0_vlan: left promiscuous mode
[ 5299.109741] team0 (unregistering): Port device team_slave_1 removed
[ 5299.185870] team0 (unregistering): Port device team_slave_0 removed
…
[ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
….
[ 5301.075531] team0: Port device team_slave_1 added
[ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5301.085588] bridge_slave_0: entered allmulticast mode
[ 5301.085800] bridge_slave_0: entered promiscuous mode
[ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state
…
[ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.193481] hsr_slave_0: entered promiscuous mode
[ 5301.204425] hsr_slave_1: entered promiscuous mode
[ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.210185] Cannot create hsr debugfs directory
[ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.255934] team0: Port device team_slave_0 added
[ 5301.256480] team0: Port device team_slave_1 added
[ 5301.256948] team0: Port device team_slave_0 added
…
[ 5301.435928] hsr_slave_0: entered promiscuous mode
[ 5301.446029] hsr_slave_1: entered promiscuous mode
[ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.455884] Cannot create hsr debugfs directory
[ 5301.502664] hsr_slave_0: entered promiscuous mode
[ 5301.513675] hsr_slave_1: entered promiscuous mode
[ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.526164] Cannot create hsr debugfs directory
[ 5301.563662] hsr_slave_0: entered promiscuous mode
[ 5301.576129] hsr_slave_1: entered promiscuous mode
[ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.580270] Cannot create hsr debugfs directory
[ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0

[ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137]
[ 5301.595877] Mem abort info:
[ 5301.595881]   ESR = 0x0000000096000006
[ 5301.595885]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 5301.595889]   SET = 0, FnV = 0
[ 5301.595893]   EA = 0, S1PTW = 0
[ 5301.595896]   FSC = 0x06: level 2 translation fault
[ 5301.595900] Data abort info:
[ 5301.595903]   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 5301.595907]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 5301.595911]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 5301.595915] [dfff800000000026] address between user and kernel address ranges
[ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP
…
[ 5301.596076] CPU: 2 PID: 102769 Comm:
syz-executor.3 Kdump: loaded Tainted:
 G        W         -------  ---  6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1
[ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA,
 BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023
[ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 5301.596085] pc : strnlen+0x40/0x88
[ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596124] sp : ffff8000beef6b40
[ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001
[ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00
[ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140
[ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8
[ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006
[ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5
[ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec
[ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200
[ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1
[ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130
[ 5301.596166] Call trace:
[ 5301.596175]  strnlen+0x40/0x88
[ 5301.596179]  trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596182]  perf_trace_qdisc_reset+0xb0/0x538
[ 5301.596184]  __traceiter_qdisc_reset+0x68/0xc0
[ 5301.596188]  qdisc_reset+0x43c/0x5e8
[ 5301.596190]  netif_set_real_num_tx_queues+0x288/0x770
[ 5301.596194]  veth_init_queues+0xfc/0x130 [veth]
[ 5301.596198]  veth_newlink+0x45c/0x850 [veth]
[ 5301.596202]  rtnl_newlink_create+0x2c8/0x798
[ 5301.596205]  __rtnl_newlink+0x92c/0xb60
[ 5301.596208]  rtnl_newlink+0xd8/0x130
[ 5301.596211]  rtnetlink_rcv_msg+0x2e0/0x890
[ 5301.596214]  netlink_rcv_skb+0x1c4/0x380
[ 5301.596225]  rtnetlink_rcv+0x20/0x38
[ 5301.596227]  netlink_unicast+0x3c8/0x640
[ 5301.596231]  netlink_sendmsg+0x658/0xa60
[ 5301.596234]  __sock_sendmsg+0xd0/0x180
[ 5301.596243]  __sys_sendto+0x1c0/0x280
[ 5301.596246]  __arm64_sys_sendto+0xc8/0x150
[ 5301.596249]  invoke_syscall+0xdc/0x268
[ 5301.596256]  el0_svc_common.constprop.0+0x16c/0x240
[ 5301.596259]  do_el0_svc+0x48/0x68
[ 5301.596261]  el0_svc+0x50/0x188
[ 5301.596265]  el0t_64_sync_handler+0x120/0x130
[ 5301.596268]  el0t_64_sync+0x194/0x198
[ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842)
[ 5301.596285] SMP: stopping secondary CPUs
[ 5301.597053] Starting crashdump kernel...
[ 5301.597057] Bye!

After applying our patch, I didn't find any kernel panic errors.

We've found a simple reproducer

 # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable

 # ip link add veth0 type veth peer name veth1

 Error: Unknown device type.

However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.

This 2 commands makes always kernel panic.

Linux version: 6.10.0-rc3

[    0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024

Kernel panic message:

[  615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[  615.237250] Dumping ftrace buffer:
[  615.237679]    (ftrace buffer empty)
[  615.238097] Modules linked in: veth crct10dif_ce virtio_gpu
virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can
xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga
uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev
videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can
omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi
lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap
stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br
dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp
llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio
ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6
Jun 22 02:36:5[3   6k152.62-4sm98k4-0k]v  kCePUr:n e1l :P IUDn:a b4le6
8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0
1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08
  615.252376] Hardware name: linux,dummy-virt (DT)
[  615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[  615.254433] pc : strnlen+0x6c/0xe0
[  615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.256088] sp : ffff800080b269a0
[  615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27:
0000000000000001
[  615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24:
ffffc070f619cf60
[  615.259020] x23: 0000000000000128 x22: 0000000000000138 x21:
dfff800000000000
[  615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18:
ffffc070f448b800
[  615.261454] x17: 0000000000000000 x16: 0000000000000001 x15:
ffffc070f4ba2a90
[  615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12:
1ffff00010164d72
[  615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 :
ffffc070e85d6184
[  615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 :
000000001504a6d3
[  615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 :
0000000000000000
[  615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 :
0000000000000000
[  615.268747] Call trace:
[  615.269180]  strnlen+0x6c/0xe0
[  615.269767]  trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[  615.270716]  trace_event_raw_event_qdisc_reset+0xe8/0x4e8
[  615.271667]  __traceiter_qdisc_reset+0xa0/0x140
[  615.272499]  qdisc_reset+0x554/0x848
[  615.273134]  netif_set_real_num_tx_queues+0x360/0x9a8
[  615.274050]  veth_init_queues+0x110/0x220 [veth]
[  615.275110]  veth_newlink+0x538/0xa50 [veth]
[  615.276172]  __rtnl_newlink+0x11e4/0x1bc8
[  615.276944]  rtnl_newlink+0xac/0x120
[  615.277657]  rtnetlink_rcv_msg+0x4e4/0x1370
[  615.278409]  netlink_rcv_skb+0x25c/0x4f0
[  615.279122]  rtnetlink_rcv+0x48/0x70
[  615.279769]  netlink_unicast+0x5a8/0x7b8
[  615.280462]  netlink_sendmsg+0xa70/0x1190

Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.

Fixes: 51270d5 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string")
Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/
Cc: netdev@vger.kernel.org
Tested-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr pushed a commit that referenced this pull request Sep 10, 2024
[ Upstream commit 3b65644 ]

The RISC-V kernel already has checks to ensure that memory which would
lie outside of the linear mapping is not used. However those checks
use memory_limit, which is used to implement the mem= kernel command
line option (to limit the total amount of memory, not its address
range). When memory is made up of two or more non-contiguous memory
banks this check is incorrect.

Two changes are made here:
 - add a call in setup_bootmem() to memblock_cap_memory_range() which
   will cause any memory which falls outside the linear mapping to be
   removed from the memory regions.
 - remove the check in create_linear_mapping_page_table() which was
   intended to remove memory which is outside the liner mapping based
   on memory_limit, as it is no longer needed. Note a check for
   mapping more memory than memory_limit (to implement mem=) is
   unnecessary because of the existing call to
   memblock_enforce_memory_limit().

This issue was seen when booting on a SV39 platform with two memory
banks:
  0x00,80000000 1GiB
  0x20,00000000 32GiB
This memory range is 158GiB from top to bottom, but the linear mapping
is limited to 128GiB, so the lower block of RAM will be mapped at
PAGE_OFFSET, and the upper block straddles the top of the linear
mapping.

This causes the following Oops:
[    0.000000] Linux version 6.10.0-rc2-gd3b8dd5b51dd-dirty (stuart.menefy@codasip.com) (riscv64-codasip-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231213) #20 SMP Sat Jun 22 11:34:22 BST 2024
[    0.000000] memblock_add: [0x0000000080000000-0x00000000bfffffff] early_init_dt_add_memory_arch+0x4a/0x52
[    0.000000] memblock_add: [0x0000002000000000-0x00000027ffffffff] early_init_dt_add_memory_arch+0x4a/0x52
...
[    0.000000] memblock_alloc_try_nid: 23724 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 early_init_dt_alloc_memory_arch+0x1e/0x48
[    0.000000] memblock_reserve: [0x00000027ffff5350-0x00000027ffffaffb] memblock_alloc_range_nid+0xb8/0x132
[    0.000000] Unable to handle kernel paging request at virtual address fffffffe7fff5350
[    0.000000] Oops [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc2-gd3b8dd5b51dd-dirty #20
[    0.000000] Hardware name: codasip,a70x (DT)
[    0.000000] epc : __memset+0x8c/0x104
[    0.000000]  ra : memblock_alloc_try_nid+0x74/0x84
[    0.000000] epc : ffffffff805e88c8 ra : ffffffff806148f6 sp : ffffffff80e03d50
[    0.000000]  gp : ffffffff80ec4158 tp : ffffffff80e0bec0 t0 : fffffffe7fff52f8
[    0.000000]  t1 : 00000027ffffb000 t2 : 5f6b636f6c626d65 s0 : ffffffff80e03d90
[    0.000000]  s1 : 0000000000005cac a0 : fffffffe7fff5350 a1 : 0000000000000000
[    0.000000]  a2 : 0000000000005cac a3 : fffffffe7fffaff8 a4 : 000000000000002c
[    0.000000]  a5 : ffffffff805e88c8 a6 : 0000000000005cac a7 : 0000000000000030
[    0.000000]  s2 : fffffffe7fff5350 s3 : ffffffffffffffff s4 : 0000000000000000
[    0.000000]  s5 : ffffffff8062347e s6 : 0000000000000000 s7 : 0000000000000001
[    0.000000]  s8 : 0000000000002000 s9 : 00000000800226d0 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : ffffffff8080a928 t4 : ffffffff8080a928
[    0.000000]  t5 : ffffffff8080a928 t6 : ffffffff8080a940
[    0.000000] status: 0000000200000100 badaddr: fffffffe7fff5350 cause: 000000000000000f
[    0.000000] [<ffffffff805e88c8>] __memset+0x8c/0x104
[    0.000000] [<ffffffff8062349c>] early_init_dt_alloc_memory_arch+0x1e/0x48
[    0.000000] [<ffffffff8043e892>] __unflatten_device_tree+0x52/0x114
[    0.000000] [<ffffffff8062441e>] unflatten_device_tree+0x9e/0xb8
[    0.000000] [<ffffffff806046fe>] setup_arch+0xd4/0x5bc
[    0.000000] [<ffffffff806007aa>] start_kernel+0x76/0x81a
[    0.000000] Code: b823 02b2 bc23 02b2 b023 04b2 b423 04b2 b823 04b2 (bc23) 04b2
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

The problem is that memblock (unaware that some physical memory cannot
be used) has allocated memory from the top of memory but which is
outside the linear mapping region.

Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com>
Fixes: c99127c ("riscv: Make sure the linear mapping does not use the kernel mapping")
Reviewed-by: David McKay <david.mckay@codasip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240622114217.2158495-1-stuart.menefy@codasip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr pushed a commit that referenced this pull request Sep 10, 2024
[ Upstream commit db19d3a ]

There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.

It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.

Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.

   rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
   rcu:     0-...!: (0 ticks this GP) idle=f5e0/0/0x0 softirq=519/519 fqs=0 (false positive?)
   rcu:     (detected by 1, t=6502 jiffies, g=-595, q=77 ncpus=2)
   Sending NMI from CPU 1 to CPUs 0:
   NMI backtrace for cpu 0
   CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.10.0-rc5-arm64-renesas-00019-g74a6f86eaf1c-dirty #20
   Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
   pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
   pc : tick_check_broadcast_expired+0xc/0x40
   lr : cpu_idle_poll.isra.0+0x8c/0x168
   sp : ffff800081c63d70
   x29: ffff800081c63d70 x28: 00000000580000c8 x27: 00000000bfee5610
   x26: 0000000000000027 x25: 0000000000000000 x24: 0000000000000000
   x23: ffff00007fbb9100 x22: ffff8000818f1008 x21: ffff8000800ef07c
   x20: ffff800081c79ec0 x19: ffff800081c70c28 x18: 0000000000000000
   x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffc2c717d8
   x14: 0000000000000000 x13: ffff000009c18080 x12: ffff8000825f7fc0
   x11: 0000000000000000 x10: ffff8000818f3cd4 x9 : 0000000000000028
   x8 : ffff800081c79ec0 x7 : ffff800081c73000 x6 : 0000000000000000
   x5 : 0000000000000000 x4 : ffff7ffffe286000 x3 : 0000000000000000
   x2 : ffff7ffffe286000 x1 : ffff800082972900 x0 : ffff8000818f1008
   Call trace:
    tick_check_broadcast_expired+0xc/0x40
    do_idle+0x9c/0x280
    cpu_startup_entry+0x34/0x40
    kernel_init+0x0/0x11c
    do_one_initcall+0x0/0x260
    __primary_switched+0x80/0x88
   rcu: rcu_preempt kthread timer wakeup didn't happen for 6501 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
   rcu:     Possible timer handling issue on cpu=0 timer-softirq=262
   rcu: rcu_preempt kthread starved for 6502 jiffies! g-595 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
   rcu:     Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
   rcu: RCU grace-period kthread stack dump:
   task:rcu_preempt     state:I stack:0     pid:15    tgid:15    ppid:2      flags:0x00000008
   Call trace:
    __switch_to+0xbc/0x100
    __schedule+0x358/0xbe0
    schedule+0x48/0x148
    schedule_timeout+0xc4/0x138
    rcu_gp_fqs_loop+0x12c/0x764
    rcu_gp_kthread+0x208/0x298
    kthread+0x10c/0x110
    ret_from_fork+0x10/0x20

The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.

Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240702190230.3825292-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants