arm/mach-aspeed: Remove UART prints & early_init printks #21

jk-ozlabs · 2015-11-24T04:26:41Z

These were useful for bringup, but we don't need them currently. This
allows us to remove most of the udbg code, and rename it to something
non-powerpc-specific.

Signed-off-by: Jeremy Kerr jk@ozlabs.org

These were useful for bringup, but we don't need them currently. This allows us to remove most of the udbg code, and rename it to something non-powerpc-specific. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

shenki · 2015-11-24T10:27:48Z

Thanks, merged in bdae018

We must not attempt to send WMI packets while holding the data-lock, as it may deadlock: BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath10k/wmi.c:1824 in_atomic(): 1, irqs_disabled(): 0, pid: 2878, name: wpa_supplicant ============================================= [ INFO: possible recursive locking detected ] 4.4.6+ openbmc#21 Tainted: G W O --------------------------------------------- wpa_supplicant/2878 is trying to acquire lock: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa0721511>] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] but task is already holding lock: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa070251b>] ath10k_peer_create+0x122/0x1ae [ath10k_core] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ar->data_lock)->rlock); lock(&(&ar->data_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by wpa_supplicant/2878: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816493ca>] rtnl_lock+0x12/0x14 openbmc#1: (&ar->conf_mutex){+.+.+.}, at: [<ffffffffa0706932>] ath10k_add_interface+0x3b/0xbda [ath10k_core] openbmc#2: (&(&ar->data_lock)->rlock){+.-...}, at: [<ffffffffa070251b>] ath10k_peer_create+0x122/0x1ae [ath10k_core] openbmc#3: (rcu_read_lock){......}, at: [<ffffffffa062f304>] rcu_read_lock+0x0/0x66 [mac80211] stack backtrace: CPU: 3 PID: 2878 Comm: wpa_supplicant Tainted: G W O 4.4.6+ openbmc#21 Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013 0000000000000000 ffff8801fcadf8f0 ffffffff8137086d ffffffff82681720 ffffffff82681720 ffff8801fcadf9b0 ffffffff8112e3be ffff8801fcadf920 0000000100000000 ffffffff82681720 ffffffffa0721500 ffff8801fcb8d348 Call Trace: [<ffffffff8137086d>] dump_stack+0x81/0xb6 [<ffffffff8112e3be>] __lock_acquire+0xc5b/0xde7 [<ffffffffa0721500>] ? ath10k_wmi_tx_beacons_iter+0x15/0x11a [ath10k_core] [<ffffffff8112d0d0>] ? mark_lock+0x24/0x201 [<ffffffff8112e908>] lock_acquire+0x132/0x1cb [<ffffffff8112e908>] ? lock_acquire+0x132/0x1cb [<ffffffffa0721511>] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffff816f9e2b>] _raw_spin_lock_bh+0x31/0x40 [<ffffffffa0721511>] ? ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa0721511>] ath10k_wmi_tx_beacons_iter+0x26/0x11a [ath10k_core] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffffa062eb18>] __iterate_interfaces+0x9d/0x13d [mac80211] [<ffffffffa062f609>] ieee80211_iterate_active_interfaces_atomic+0x32/0x3e [mac80211] [<ffffffffa07214eb>] ? ath10k_wmi_cmd_send_nowait+0x1ce/0x1ce [ath10k_core] [<ffffffffa071fa9f>] ath10k_wmi_tx_beacons_nowait.isra.13+0x14/0x16 [ath10k_core] [<ffffffffa0721676>] ath10k_wmi_cmd_send+0x71/0x242 [ath10k_core] [<ffffffffa07023f6>] ath10k_wmi_peer_delete+0x3f/0x42 [ath10k_core] [<ffffffffa0702557>] ath10k_peer_create+0x15e/0x1ae [ath10k_core] [<ffffffffa0707004>] ath10k_add_interface+0x70d/0xbda [ath10k_core] [<ffffffffa05fffcc>] drv_add_interface+0x123/0x1a5 [mac80211] [<ffffffffa061554b>] ieee80211_do_open+0x351/0x667 [mac80211] [<ffffffffa06158aa>] ieee80211_open+0x49/0x4c [mac80211] [<ffffffff8163ecf9>] __dev_open+0x88/0xde [<ffffffff8163ef6e>] __dev_change_flags+0xa4/0x13a [<ffffffff8163f023>] dev_change_flags+0x1f/0x54 [<ffffffff816a5532>] devinet_ioctl+0x2b9/0x5c9 [<ffffffff816514dd>] ? copy_to_user+0x32/0x38 [<ffffffff816a6115>] inet_ioctl+0x81/0x9d [<ffffffff816a6115>] ? inet_ioctl+0x81/0x9d [<ffffffff81621cf8>] sock_do_ioctl+0x20/0x3d [<ffffffff816223c4>] sock_ioctl+0x222/0x22e [<ffffffff8121cf95>] do_vfs_ioctl+0x453/0x4d7 [<ffffffff81625603>] ? __sys_recvmsg+0x4c/0x5b [<ffffffff81225af1>] ? __fget_light+0x48/0x6c [<ffffffff8121d06b>] SyS_ioctl+0x52/0x74 [<ffffffff816fa736>] entry_SYSCALL_64_fastpath+0x16/0x7a Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

commit bb143f8 upstream. ARConnect/MCIP Inter-Core-Interrupt module can't send interrupt to local core. So use core intc capability to trigger software interrupt to self, using an unsued IRQ openbmc#21. This showed up as csd deadlock with LTP trace_sched on a dual core system. This test acts as scheduler fuzzer, triggering all sorts of schedulting activity. Trouble starts with IPI to self, which doesn't get delivered (effectively lost due to H/w capability), but the msg intended to be sent remain enqueued in per-cpu @ipi_data. All subsequent IPIs to this core from other cores get elided due to the IPI coalescing optimization in ipi_send_msg_one() where a pending msg implies an IPI already sent and assumes other core is yet to ack it. After the elided IPI, other core simply goes into csd_lock_wait() but never comes out as this core never sees the interrupt. Fixes STAR 9001008624 Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit afc3f83 ("scsi: ipr: Add asynchronous error notification") introduced the warn on shown below. To fix this, rather than attempting to send the KOBJ_CHANGE uevent from interrupt context, which is what is causing the WARN_ON, just wake the ipr worker thread which will send a KOBJ_CHANGE uevent. [ 142.278120] WARNING: CPU: 15 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x7c/0xd0 [ 142.278124] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ses enclosure scsi_transport_sas sg pseries_rng nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod sd_mod cdrom ipr libata ibmvscsi scsi_transport_srp ibmveth dm_mirror dm_region_hash dm_log dm_mod [ 142.278208] CPU: 15 PID: 0 Comm: swapper/15 Not tainted 4.8.0.ipr+ openbmc#21 [ 142.278213] task: c00000010cf24480 task.stack: c00000010cfec000 [ 142.278217] NIP: c0000000000c0c7c LR: c000000000881778 CTR: c0000000003c5bf0 [ 142.278221] REGS: c00000010cfef080 TRAP: 0700 Not tainted (4.8.0.ipr+) [ 142.278224] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28008022 XER: 2000000f [ 142.278236] CFAR: c0000000000c0c20 SOFTE: 0 GPR00: c000000000706c78 c00000010cfef300 c000000000f91d00 c000000000706c78 GPR04: 0000000000000200 c000000000f7bc80 0000000000000000 00000000024000c0 GPR08: 0000000000000000 0000000000000001 c000000000ee1d00 c000000000a9bdd0 GPR12: c0000000003c5bf0 c00000000eb22d00 c000000100ca3880 c00000020ed38400 GPR16: 0000000000000000 0000000000000000 c000000100940508 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 00000000024000c0 GPR24: c0000000004588e0 c00000010863bd00 c00000010863bd00 c0000000013773f8 GPR28: c000000000f7bc80 0000000000000000 ffffffffffffffff c000000000f7bcd8 [ 142.278290] NIP [c0000000000c0c7c] __local_bh_enable_ip+0x7c/0xd0 [ 142.278296] LR [c000000000881778] _raw_spin_unlock_bh+0x38/0x60 [ 142.278299] Call Trace: [ 142.278303] [c00000010cfef300] [c000000000f7bc80] init_net+0x0/0x1900 (unreliable) [ 142.278310] [c00000010cfef320] [c000000000706c78] peernet2id+0x58/0x80 [ 142.278316] [c00000010cfef370] [c00000000075caec] netlink_broadcast_filtered+0x30c/0x550 [ 142.278323] [c00000010cfef430] [c000000000459078] kobject_uevent_env+0x588/0x780 [ 142.278331] [c00000010cfef510] [d000000003163a6c] ipr_process_error+0x11c/0x240 [ipr] [ 142.278337] [c00000010cfef5c0] [d000000003152298] ipr_fail_all_ops+0x108/0x220 [ipr] [ 142.278343] [c00000010cfef670] [d0000000031643f8] ipr_reset_restore_cfg_space+0xa8/0x240 [ipr] [ 142.278350] [c00000010cfef6f0] [d000000003158a00] ipr_reset_ioa_job+0x80/0xe0 [ipr] [ 142.278356] [c00000010cfef720] [d000000003153f78] ipr_reset_timer_done+0xa8/0xe0 [ipr] [ 142.278363] [c00000010cfef770] [c000000000149c88] call_timer_fn+0x58/0x1c0 [ 142.278368] [c00000010cfef800] [c000000000149f60] expire_timers+0x140/0x200 [ 142.278373] [c00000010cfef870] [c00000000014a0e8] run_timer_softirq+0xc8/0x230 [ 142.278379] [c00000010cfef900] [c0000000000c0844] __do_softirq+0x164/0x3c0 [ 142.278384] [c00000010cfef9f0] [c0000000000c0f18] irq_exit+0x1a8/0x1c0 [ 142.278389] [c00000010cfefa20] [c000000000020b54] timer_interrupt+0xa4/0xe0 [ 142.278394] [c00000010cfefa50] [c000000000002414] decrementer_common+0x114/0x180 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When streaming a lot of data and the RZ/A1 can't keep up, some status bits will get set that are not being checked or cleared which cause the following messages and the Ethernet driver to stop working. This patch fixes that issue. irq 21: nobody cared (try booting with the "irqpoll" option) handlers: [<c036b71c>] sh_eth_interrupt Disabling IRQ openbmc#21 Fixes: db89347 ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: openbmc#8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . openbmc#9 [] tcp_rcv_established at ffffffff81580b64 openbmc#10 [] tcp_v4_do_rcv at ffffffff8158b54a openbmc#11 [] tcp_v4_rcv at ffffffff8158cd02 openbmc#12 [] ip_local_deliver_finish at ffffffff815668f4 openbmc#13 [] ip_local_deliver at ffffffff81566bd9 openbmc#14 [] ip_rcv_finish at ffffffff8156656d openbmc#15 [] ip_rcv at ffffffff81566f06 openbmc#16 [] __netif_receive_skb_core at ffffffff8152b3a2 openbmc#17 [] __netif_receive_skb at ffffffff8152b608 openbmc#18 [] netif_receive_skb at ffffffff8152b690 openbmc#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] openbmc#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] openbmc#21 [] net_rx_action at ffffffff8152bac2 openbmc#22 [] __do_softirq at ffffffff81084b4f openbmc#23 [] call_softirq at ffffffff8164845c openbmc#24 [] do_softirq at ffffffff81016fc5 openbmc#25 [] irq_exit at ffffffff81084ee5 openbmc#26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3998e6b upstream. When the final cifsFileInfo_put() is called from cifsiod and an oplock break work is queued, lockdep complains loudly: ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #21 Not tainted --------------------------------------------- kworker/0:2/78 is trying to acquire lock: ("cifsiod"){++++.+}, at: flush_work+0x215/0x350 but task is already holding lock: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock("cifsiod"); lock("cifsiod"); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by kworker/0:2/78: #0: ("cifsiod"){++++.+}, at: process_one_work+0x255/0x8e0 #1: ((&wdata->work)){+.+...}, at: process_one_work+0x255/0x8e0 stack backtrace: CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 4.11.0+ #21 Workqueue: cifsiod cifs_writev_complete Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? match_held_lock+0x20/0x2b0 ? trace_hardirqs_off_caller+0x86/0x130 ? mark_lock+0xa6/0x920 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? flush_work+0x215/0x350 flush_work+0x236/0x350 ? flush_work+0x215/0x350 ? destroy_worker+0x170/0x170 __cancel_work_timer+0x17d/0x210 ? ___preempt_schedule+0x16/0x18 cancel_work_sync+0x10/0x20 cifsFileInfo_put+0x338/0x7f0 cifs_writedata_release+0x2a/0x40 ? cifs_writedata_release+0x2a/0x40 cifs_writev_complete+0x29d/0x850 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 This is a real warning. Since the oplock is queued on the same workqueue this can deadlock if there is only one worker thread active for the workqueue (which will be the case during memory pressure when the rescuer thread is handling it). Furthermore, there is at least one other kind of hang possible due to the oplock break handling if there is only worker. (This can be reproduced without introducing memory pressure by having passing 1 for the max_active parameter of cifsiod.) cifs_oplock_break() can wait indefintely in the filemap_fdatawait() while the cifs_writev_complete() work is blocked: sysrq: SysRq : Show Blocked State task PC stack pid father kworker/0:1 D 0 16 2 0x00000000 Workqueue: cifsiod cifs_oplock_break Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x4a/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 cifs_oplock_break+0x651/0x710 ? preempt_count_sub+0x18/0xd0 process_one_work+0x304/0x8e0 worker_thread+0x9b/0x6a0 kthread+0x1b2/0x200 ? process_one_work+0x8e0/0x8e0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x31/0x40 dd D 0 683 171 0x00000000 Call Trace: __schedule+0x562/0xf40 ? mark_held_locks+0x29/0xb0 schedule+0x57/0xe0 io_schedule+0x21/0x50 wait_on_page_bit+0x143/0x190 ? add_to_page_cache_lru+0x150/0x150 __filemap_fdatawait_range+0x134/0x190 ? do_writepages+0x51/0x70 filemap_fdatawait_range+0x14/0x30 filemap_fdatawait+0x3b/0x40 filemap_write_and_wait+0x4e/0x70 cifs_flush+0x6a/0xb0 filp_close+0x52/0xa0 __close_fd+0xdc/0x150 SyS_close+0x33/0x60 entry_SYSCALL_64_fastpath+0x1f/0xbe Showing all locks held in the system: 2 locks held by kworker/0:1/16: #0: ("cifsiod"){.+.+.+}, at: process_one_work+0x255/0x8e0 #1: ((&cfile->oplock_break)){+.+.+.}, at: process_one_work+0x255/0x8e0 Showing busy workqueues and worker pools: workqueue cifsiod: flags=0xc pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1 in-flight: 16:cifs_oplock_break delayed: cifs_writev_complete, cifs_echo_request pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=0s workers=3 idle: 750 3 Fix these problems by creating a a new workqueue (with a rescuer) for the oplock break work. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36eb8ff upstream. Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8425843 ] pid_task() dereferences rcu protected tasks array. But there is no rcu_read_lock() in shutdown_umh() routine so that rcu_read_lock() is needed. get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock() then calls pid_task(). if task isn't NULL, it increases reference count of task. test commands: %modprobe bpfilter %modprobe -rv bpfilter splat looks like: [15102.030932] ============================= [15102.030957] WARNING: suspicious RCU usage [15102.030985] 4.19.0-rc7+ #21 Not tainted [15102.031010] ----------------------------- [15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage! [15102.031063] other info that might help us debug this: [15102.031332] rcu_scheduler_active = 2, debug_locks = 1 [15102.031363] 1 lock held by modprobe/1570: [15102.031389] #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter] [15102.031552] stack backtrace: [15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21 [15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [15102.031628] Call Trace: [15102.031676] dump_stack+0xc9/0x16b [15102.031723] ? show_regs_print_info+0x5/0x5 [15102.031801] ? lockdep_rcu_suspicious+0x117/0x160 [15102.031855] pid_task+0x134/0x160 [15102.031900] ? find_vpid+0xf0/0xf0 [15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter] [15102.032055] stop_umh+0x46/0x52 [bpfilter] [15102.032092] __x64_sys_delete_module+0x47e/0x570 [ ... ] Fixes: d2ba09c ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0fbcc5b ] xt_rateest_net_exit() was added to check whether rules are flushed successfully. but ->net_exit() callback is called earlier than ->destroy() callback. So that ->net_exit() callback can't check that. test commands: %ip netns add vm1 %ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \ --dport 1111 -j RATEEST --rateest-name ap \ --rateest-interval 250ms --rateest-ewma 0.5s %ip netns del vm1 splat looks like: [ 668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables [ 668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21 [ 668.813518] Workqueue: netns cleanup_net [ 668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49 [ 668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282 [ 668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000 [ 668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74 [ 668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be [ 668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08 [ 668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000 [ 668.813518] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 668.813518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0 [ 668.813518] Call Trace: [ 668.813518] ? unregister_netdevice_many+0xe0/0xe0 [ 668.813518] ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST] [ 668.813518] ? default_device_exit+0x1ca/0x270 [ 668.813518] ? remove_proc_entry+0x1cd/0x390 [ 668.813518] ? dev_change_net_namespace+0xd00/0xd00 [ 668.813518] ? __init_waitqueue_head+0x130/0x130 [ 668.813518] ops_exit_list.isra.10+0x94/0x140 [ 668.813518] cleanup_net+0x45b/0x900 [ 668.813518] ? net_drop_ns+0x110/0x110 [ 668.813518] ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80 [ 668.813518] ? save_trace+0x300/0x300 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? process_one_work+0xb60/0x1de0 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? __lock_acquire+0x4500/0x4500 [ 668.813518] ? __lock_is_held+0xb4/0x140 [ 668.813518] process_one_work+0xc13/0x1de0 [ 668.813518] ? pwq_dec_nr_in_flight+0x3c0/0x3c0 [ 668.813518] ? set_load_weight+0x270/0x270 [ ... ] Fixes: 3427b2a ("netfilter: make xt_rateest hash table per net") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b058809 ] A bug is present in GDB which causes early string termination when parsing variables. This has been reported [0], but we should ensure that we can support at least basic printing of the core kernel strings. For current gdb version (has been tested with 7.3 and 8.1), 'lx-version' only prints one character. (gdb) lx-version L(gdb) This can be fixed by casting 'linux_banner' as (char *). (gdb) lx-version Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018 [0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077 [kbingham@kernel.org: add detail to commit message] Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com Fixes: 2d061d9 ("scripts/gdb: add version command") Signed-off-by: Du Changbin <changbin.du@gmail.com> Signed-off-by: Kieran Bingham <kbingham@kernel.org> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cdb8faa ] Eric has reported on OpenWrt's bug tracking system[1], that he's not able to use USB devices on his WNDR3400v2 device after the boot, until he turns on GPIO #21 manually through sysfs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2170 Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Eric Bohlman <ericbohlman@gmail.com> Tested-by: Eric Bohlman <ericbohlman@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2542604 ] When a matchall classifier is added, there is a small time interval in which tp->root is NULL. If we receive a packet in this small time slice a NULL pointer dereference will happen, leading to a kernel panic: # tc qdisc replace dev eth0 ingress # tc filter add dev eth0 parent ffff: matchall action gact drop Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000a623d530 [0000000000000034] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP Modules linked in: cls_matchall sch_ingress nls_iso8859_1 nls_cp437 vfat fat m25p80 spi_nor mtd xhci_plat_hcd xhci_hcd phy_generic sfp mdio_i2c usbcore i2c_mv64xxx marvell10g mvpp2 usb_common spi_orion mvmdio i2c_core sbsa_gwdt phylink ip_tables x_tables autofs4 Process ksoftirqd/0 (pid: 9, stack limit = 0x0000000009de7d62) CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.1.0-rc6 #21 Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : mall_classify+0x28/0x78 [cls_matchall] lr : tcf_classify+0x78/0x138 sp : ffffff80109db9d0 x29: ffffff80109db9d0 x28: ffffffc426058800 x27: 0000000000000000 x26: ffffffc425b0dd00 x25: 0000000020000000 x24: 0000000000000000 x23: ffffff80109dbac0 x22: 0000000000000001 x21: ffffffc428ab5100 x20: ffffffc425b0dd00 x19: ffffff80109dbac0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: ffffffbf108ad288 x12: dead000000000200 x11: 00000000f0000000 x10: 0000000000000001 x9 : ffffffbf1089a220 x8 : 0000000000000001 x7 : ffffffbebffaa950 x6 : 0000000000000000 x5 : 000000442d6ba000 x4 : 0000000000000000 x3 : ffffff8008735ad8 x2 : ffffff80109dbac0 x1 : ffffffc425b0dd00 x0 : ffffff8010592078 Call trace: mall_classify+0x28/0x78 [cls_matchall] tcf_classify+0x78/0x138 __netif_receive_skb_core+0x29c/0xa20 __netif_receive_skb_one_core+0x34/0x60 __netif_receive_skb+0x28/0x78 netif_receive_skb_internal+0x2c/0xc0 napi_gro_receive+0x1a0/0x1d8 mvpp2_poll+0x928/0xb18 [mvpp2] net_rx_action+0x108/0x378 __do_softirq+0x128/0x320 run_ksoftirqd+0x44/0x60 smpboot_thread_fn+0x168/0x1b0 kthread+0x12c/0x130 ret_from_fork+0x10/0x1c Code: aa0203f3 aa1e03e0 d503201f f9400684 (b9403480) ---[ end trace fc71e2ef7b8ab5a5 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x002,00002000 Memory Limit: none Rebooting in 1 seconds.. Fix this by adding a NULL check in mall_classify(). Fixes: ed76f5e ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0a255e upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 33df2f1 ] Some QPs (e.g. XRC QP) are not tracked in kernel, in this case they have an invalid res and should not be bound to any dynamically-allocated counter in auto mode. This fixes below call trace: BUG: kernel NULL pointer dereference, address: 0000000000000390 PGD 80000001a7233067 P4D 80000001a7233067 PUD 1a7215067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 24822 Comm: ibv_xsrq_pingpo Not tainted 5.4.0-rc5+ #21 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:rdma_counter_bind_qp_auto+0x142/0x270 [ib_core] Code: e1 48 85 c0 48 89 c2 0f 84 bc 00 00 00 49 8b 06 48 39 42 48 75 d6 40 3a aa 90 00 00 00 75 cd 49 8b 86 00 01 00 00 48 8b 4a 28 <8b> 80 90 03 00 00 39 81 90 03 00 00 75 b4 85 c0 74 b0 48 8b 04 24 RSP: 0018:ffffc900003f39c0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88820020ec00 RSI: 0000000000000004 RDI: ffffffffffffffc0 RBP: 0000000000000001 R08: ffff888224149ff0 R09: ffffc900003f3968 R10: ffffffffffffffff R11: ffff8882249c5848 R12: ffffffffffffffff R13: ffff88821d5aca50 R14: ffff8881f7690800 R15: ffff8881ff890000 FS: 00007fe53a3e1740(0000) GS:ffff888237b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000390 CR3: 00000001a7292006 CR4: 00000000003606a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _ib_modify_qp+0x3a4/0x3f0 [ib_core] ? lookup_get_idr_uobject.part.8+0x23/0x40 [ib_uverbs] modify_qp+0x322/0x3e0 [ib_uverbs] ib_uverbs_modify_qp+0x43/0x70 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_run_method+0x6be/0x760 [ib_uverbs] ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ib_uverbs_cmd_verbs+0x18d/0x3a0 [ib_uverbs] ? get_acl+0x1a/0x120 ? __alloc_pages_nodemask+0x15d/0x2c0 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] do_vfs_ioctl+0xa5/0x610 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 99fa331 ("RDMA/counter: Add "auto" configuration mode support") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0dee282 ] Coresight_claim_device() is called in cti_starting_cpu() only when CTI is enabled while coresight_disclaim_device() is called uncontionally in cti_dying_cpu(). This triggered below WARNING. Only call disclaim device when CTI device is enabled to fix it. [ 75.989643] WARNING: CPU: 1 PID: 14 at kernel/drivers/hwtracing/coresight/coresight.c:209 coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.9.0-rc1-gff1304be0a05-dirty #21 [ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT) [ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--) [ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989775] lr : coresight_disclaim_device+0x24/0x38 [ 75.989783] sp : ffff800011cd3c90 . [ 75.990018] Call trace: [ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24 [ 75.990066] cti_dying_cpu+0x34/0x4c [ 75.990101] cpuhp_invoke_callback+0x84/0x1e0 [ 75.990121] take_cpu_down+0x90/0xe0 [ 75.990154] multi_cpu_stop+0x134/0x160 [ 75.990171] cpu_stopper_thread+0xb0/0x13c [ 75.990196] smpboot_thread_fn+0x1c4/0x270 [ 75.990222] kthread+0x128/0x154 [ 75.990251] ret_from_fork+0x10/0x18 Fixes: e9b8805 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6e8836c ] Below BUG is triggered by call pm_runtime_get_sync() in cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt disabled. Pm_runtime_get_sync() calls clock driver to enable clock which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw() since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put() is called in cti_disabled. No need to increase pm count when CPU gets online since it's not decreased when CPU is offline. [ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002 [ 105.800290] Modules linked in: [ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.9.0-rc1-gff1304be0a05-dirty #21 [ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT) [ 105.800353] Call trace: [ 105.800414] dump_backtrace+0x0/0x1d4 [ 105.800439] show_stack+0x14/0x1c [ 105.800462] dump_stack+0xc0/0x100 [ 105.800490] __schedule_bug+0x58/0x74 [ 105.800523] __schedule+0x590/0x65c [ 105.800538] schedule+0x78/0x10c [ 105.800553] schedule_timeout+0x188/0x250 [ 105.800585] qmp_send.constprop.10+0x12c/0x1b0 [ 105.800599] qmp_qdss_clk_prepare+0x18/0x20 [ 105.800622] clk_core_prepare+0x48/0xd4 [ 105.800639] clk_prepare+0x20/0x34 [ 105.800663] amba_pm_runtime_resume+0x54/0x90 [ 105.800695] __rpm_callback+0xdc/0x138 [ 105.800709] rpm_callback+0x24/0x78 [ 105.800724] rpm_resume+0x328/0x47c [ 105.800739] __pm_runtime_resume+0x50/0x74 [ 105.800768] cti_starting_cpu+0x40/0xa4 [ 105.800795] cpuhp_invoke_callback+0x84/0x1e0 [ 105.800814] notify_cpu_starting+0x9c/0xb8 [ 105.800834] secondary_start_kernel+0xd8/0x164 [ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c] Fixes: e9b8805 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0dee282 ] Coresight_claim_device() is called in cti_starting_cpu() only when CTI is enabled while coresight_disclaim_device() is called uncontionally in cti_dying_cpu(). This triggered below WARNING. Only call disclaim device when CTI device is enabled to fix it. [ 75.989643] WARNING: CPU: 1 PID: 14 at kernel/drivers/hwtracing/coresight/coresight.c:209 coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989697] CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.9.0-rc1-gff1304be0a05-dirty openbmc#21 [ 75.989709] Hardware name: Thundercomm Dragonboard 845c (DT) [ 75.989737] pstate: 80c00085 (Nzcv daIf +PAN +UAO BTYPE=--) [ 75.989758] pc : coresight_disclaim_device_unlocked+0x10/0x24 [ 75.989775] lr : coresight_disclaim_device+0x24/0x38 [ 75.989783] sp : ffff800011cd3c90 . [ 75.990018] Call trace: [ 75.990041] coresight_disclaim_device_unlocked+0x10/0x24 [ 75.990066] cti_dying_cpu+0x34/0x4c [ 75.990101] cpuhp_invoke_callback+0x84/0x1e0 [ 75.990121] take_cpu_down+0x90/0xe0 [ 75.990154] multi_cpu_stop+0x134/0x160 [ 75.990171] cpu_stopper_thread+0xb0/0x13c [ 75.990196] smpboot_thread_fn+0x1c4/0x270 [ 75.990222] kthread+0x128/0x154 [ 75.990251] ret_from_fork+0x10/0x18 Fixes: e9b8805 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6e8836c ] Below BUG is triggered by call pm_runtime_get_sync() in cti_cpuhp_enable_hw(). It's in CPU hotplug callback with interrupt disabled. Pm_runtime_get_sync() calls clock driver to enable clock which could sleep. Remove pm_runtime_get_sync() in cti_cpuhp_enable_hw() since pm_runtime_get_sync() is called in cti_enabld and pm_runtime_put() is called in cti_disabled. No need to increase pm count when CPU gets online since it's not decreased when CPU is offline. [ 105.800279] BUG: scheduling while atomic: swapper/1/0/0x00000002 [ 105.800290] Modules linked in: [ 105.800327] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.9.0-rc1-gff1304be0a05-dirty openbmc#21 [ 105.800337] Hardware name: Thundercomm Dragonboard 845c (DT) [ 105.800353] Call trace: [ 105.800414] dump_backtrace+0x0/0x1d4 [ 105.800439] show_stack+0x14/0x1c [ 105.800462] dump_stack+0xc0/0x100 [ 105.800490] __schedule_bug+0x58/0x74 [ 105.800523] __schedule+0x590/0x65c [ 105.800538] schedule+0x78/0x10c [ 105.800553] schedule_timeout+0x188/0x250 [ 105.800585] qmp_send.constprop.10+0x12c/0x1b0 [ 105.800599] qmp_qdss_clk_prepare+0x18/0x20 [ 105.800622] clk_core_prepare+0x48/0xd4 [ 105.800639] clk_prepare+0x20/0x34 [ 105.800663] amba_pm_runtime_resume+0x54/0x90 [ 105.800695] __rpm_callback+0xdc/0x138 [ 105.800709] rpm_callback+0x24/0x78 [ 105.800724] rpm_resume+0x328/0x47c [ 105.800739] __pm_runtime_resume+0x50/0x74 [ 105.800768] cti_starting_cpu+0x40/0xa4 [ 105.800795] cpuhp_invoke_callback+0x84/0x1e0 [ 105.800814] notify_cpu_starting+0x9c/0xb8 [ 105.800834] secondary_start_kernel+0xd8/0x164 [ 105.800933] CPU1: Booted secondary processor 0x0000000100 [0x517f803c] Fixes: e9b8805 ("coresight: cti: Add CPU Hotplug handling to CTI driver") Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-7-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 43e8f76 ] When using kprobe on powerpc booke series processor, Oops happens as show bellow: / # echo "p:myprobe do_nanosleep" > /sys/kernel/debug/tracing/kprobe_events / # echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable / # sleep 1 [ 50.076730] Oops: Exception in kernel mode, sig: 5 [#1] [ 50.077017] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 [ 50.077221] Modules linked in: [ 50.077462] CPU: 0 PID: 77 Comm: sleep Not tainted 5.14.0-rc4-00022-g251a1524293d #21 [ 50.077887] NIP: c0b9c4e0 LR: c00ebecc CTR: 00000000 [ 50.078067] REGS: c3883de0 TRAP: 0700 Not tainted (5.14.0-rc4-00022-g251a1524293d) [ 50.078349] MSR: 00029000 <CE,EE,ME> CR: 24000228 XER: 20000000 [ 50.078675] [ 50.078675] GPR00: c00ebdf0 c3883e90 c313e300 c3883ea0 00000001 00000000 c3883ecc 00000001 [ 50.078675] GPR08: c100598c c00ea250 00000004 00000000 24000222 102490c2 bff4180c 101e60d4 [ 50.078675] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f 10240000 00500000 [ 50.078675] GPR24: 00000002 00000000 c3883ea0 00000001 00000000 0000c350 3b9b8d50 00000000 [ 50.080151] NIP [c0b9c4e0] do_nanosleep+0x0/0x190 [ 50.080352] LR [c00ebecc] hrtimer_nanosleep+0x14c/0x1e0 [ 50.080638] Call Trace: [ 50.080801] [c3883e90] [c00ebdf0] hrtimer_nanosleep+0x70/0x1e0 (unreliable) [ 50.081110] [c3883f00] [c00ec004] sys_nanosleep_time32+0xa4/0x110 [ 50.081336] [c3883f40] [c001509c] ret_from_syscall+0x0/0x28 [ 50.081541] --- interrupt: c00 at 0x100a4d08 [ 50.081749] NIP: 100a4d08 LR: 101b5234 CTR: 00000003 [ 50.081931] REGS: c3883f50 TRAP: 0c00 Not tainted (5.14.0-rc4-00022-g251a1524293d) [ 50.082183] MSR: 0002f902 <CE,EE,PR,FP,ME> CR: 24000222 XER: 00000000 [ 50.082457] [ 50.082457] GPR00: 000000a2 bf980040 1024b4d0 bf980084 bf980084 64000000 00555345 fefefeff [ 50.082457] GPR08: 7f7f7f7f 101e0000 00000069 00000003 28000422 102490c2 bff4180c 101e60d4 [ 50.082457] GPR16: 00000000 102454ac 00000040 10240000 10241100 102410f 10240000 00500000 [ 50.082457] GPR24: 00000002 bf9803f4 10240000 00000000 00000000 100039e0 00000000 102444e8 [ 50.083789] NIP [100a4d08] 0x100a4d08 [ 50.083917] LR [101b5234] 0x101b5234 [ 50.084042] --- interrupt: c00 [ 50.084238] Instruction dump: [ 50.084483] 4bfffc40 60000000 60000000 60000000 9421fff0 39400402 914200c0 38210010 [ 50.084841] 4bfffc20 00000000 00000000 00000000 <7fe00008> 7c0802a6 7c892378 93c10048 [ 50.085487] ---[ end trace f6fffe98e2fa8f3e ]--- [ 50.085678] Trace/breakpoint trap There is no real mode for booke arch and the MMU translation is always on. The corresponding MSR_IS/MSR_DS bit in booke is used to switch the address space, but not for real mode judgment. Fixes: 21f8b2f ("powerpc/kprobes: Ignore traps that happened in real mode") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210809023658.218915-1-pulehui@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a06c2e5 ] The id of slv_cnoc_mnoc_cfg node is mistakenly coded as id of slv_blsp_1. It causes the following warning on slv_blsp_1 node adding. Correct the id of slv_cnoc_mnoc_cfg node. [ 1.948180] ------------[ cut here ]------------ [ 1.954122] WARNING: CPU: 2 PID: 7 at drivers/interconnect/core.c:962 icc_node_add+0xe4/0xf8 [ 1.958994] Modules linked in: [ 1.967399] CPU: 2 PID: 7 Comm: kworker/u16:0 Not tainted 5.14.0-rc6-next-20210818 #21 [ 1.970275] Hardware name: Xiaomi Redmi Note 7 (DT) [ 1.978169] Workqueue: events_unbound deferred_probe_work_func [ 1.982945] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.988849] pc : icc_node_add+0xe4/0xf8 [ 1.995699] lr : qnoc_probe+0x350/0x438 [ 1.999519] sp : ffff80001008bb10 [ 2.003337] x29: ffff80001008bb10 x28: 000000000000001a x27: ffffb83ddc61ee28 [ 2.006818] x26: ffff2fe341d44080 x25: ffff2fe340f3aa80 x24: ffffb83ddc98f0e8 [ 2.013938] x23: 0000000000000024 x22: ffff2fe3408b7400 x21: 0000000000000000 [ 2.021054] x20: ffff2fe3408b7410 x19: ffff2fe341d44080 x18: 0000000000000010 [ 2.028173] x17: ffff2fe3bdd0aac0 x16: 0000000000000281 x15: ffff2fe3400f5528 [ 2.035290] x14: 000000000000013f x13: ffff2fe3400f5528 x12: 00000000ffffffea [ 2.042410] x11: ffffb83ddc9109d0 x10: ffffb83ddc8f8990 x9 : ffffb83ddc8f89e8 [ 2.049527] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 2.056645] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : ffffb83ddc9903b0 [ 2.063764] x2 : 1a1f6fde34d45500 x1 : ffff2fe340f3a880 x0 : ffff2fe340f3a880 [ 2.070882] Call trace: [ 2.077989] icc_node_add+0xe4/0xf8 [ 2.080247] qnoc_probe+0x350/0x438 [ 2.083718] platform_probe+0x68/0xd8 [ 2.087191] really_probe+0xb8/0x300 [ 2.091011] __driver_probe_device+0x78/0xe0 [ 2.094659] driver_probe_device+0x80/0x110 [ 2.098911] __device_attach_driver+0x90/0xe0 [ 2.102818] bus_for_each_drv+0x78/0xc8 [ 2.107331] __device_attach+0xf0/0x150 [ 2.110977] device_initial_probe+0x14/0x20 [ 2.114796] bus_probe_device+0x9c/0xa8 [ 2.118963] deferred_probe_work_func+0x88/0xc0 [ 2.122784] process_one_work+0x1a4/0x338 [ 2.127296] worker_thread+0x1f8/0x420 [ 2.131464] kthread+0x150/0x160 [ 2.135107] ret_from_fork+0x10/0x20 [ 2.138495] ---[ end trace 5eea8768cb620e87 ]--- Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: f80a1d4 ("interconnect: qcom: Add SDM660 interconnect provider driver") Link: https://lore.kernel.org/r/20210823014003.31391-1-shawn.guo@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Some QPs (e.g. XRC QP) are not tracked in kernel, in this case they have an invalid res and should not be bound to any dynamically-allocated counter in auto mode. This fixes below call trace: BUG: kernel NULL pointer dereference, address: 0000000000000390 PGD 80000001a7233067 P4D 80000001a7233067 PUD 1a7215067 PMD 0 Oops: 0000 [openbmc#1] SMP PTI CPU: 2 PID: 24822 Comm: ibv_xsrq_pingpo Not tainted 5.4.0-rc5+ openbmc#21 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:rdma_counter_bind_qp_auto+0x142/0x270 [ib_core] Code: e1 48 85 c0 48 89 c2 0f 84 bc 00 00 00 49 8b 06 48 39 42 48 75 d6 40 3a aa 90 00 00 00 75 cd 49 8b 86 00 01 00 00 48 8b 4a 28 <8b> 80 90 03 00 00 39 81 90 03 00 00 75 b4 85 c0 74 b0 48 8b 04 24 RSP: 0018:ffffc900003f39c0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88820020ec00 RSI: 0000000000000004 RDI: ffffffffffffffc0 RBP: 0000000000000001 R08: ffff888224149ff0 R09: ffffc900003f3968 R10: ffffffffffffffff R11: ffff8882249c5848 R12: ffffffffffffffff R13: ffff88821d5aca50 R14: ffff8881f7690800 R15: ffff8881ff890000 FS: 00007fe53a3e1740(0000) GS:ffff888237b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000390 CR3: 00000001a7292006 CR4: 00000000003606a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _ib_modify_qp+0x3a4/0x3f0 [ib_core] ? lookup_get_idr_uobject.part.8+0x23/0x40 [ib_uverbs] modify_qp+0x322/0x3e0 [ib_uverbs] ib_uverbs_modify_qp+0x43/0x70 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb1/0xf0 [ib_uverbs] ib_uverbs_run_method+0x6be/0x760 [ib_uverbs] ? uverbs_disassociate_api+0xd0/0xd0 [ib_uverbs] ib_uverbs_cmd_verbs+0x18d/0x3a0 [ib_uverbs] ? get_acl+0x1a/0x120 ? __alloc_pages_nodemask+0x15d/0x2c0 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] do_vfs_ioctl+0xa5/0x610 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x48/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 99fa331 ("RDMA/counter: Add "auto" configuration mode support") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20191212091214.315005-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm/mach-aspeed: Remove UART prints & early_init printks

300988b

These were useful for bringup, but we don't need them currently. This allows us to remove most of the udbg code, and rename it to something non-powerpc-specific. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

shenki closed this Nov 24, 2015

jk-ozlabs deleted the openbmc/early-init-cleanup branch November 25, 2015 02:55

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

arm/mach-aspeed: Remove UART prints & early_init printks #21

arm/mach-aspeed: Remove UART prints & early_init printks #21

jk-ozlabs commented Nov 24, 2015

shenki commented Nov 24, 2015

arm/mach-aspeed: Remove UART prints & early_init printks #21

arm/mach-aspeed: Remove UART prints & early_init printks #21

Conversation

jk-ozlabs commented Nov 24, 2015

shenki commented Nov 24, 2015