fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle #4507
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com>
bektaskemal
force-pushed
the
fix/make_obstacle_layer_not_current
branch
from
c796fad
to
fded988
Compare
Codecov ReportAttention: Patch coverage is
|
SteveMacenski
requested changes
Jul 2, 2024
SteveMacenski
approved these changes
Jul 2, 2024
Yes, it works as we discussed. |
|
Thanks for the discussion / contribution! |
Marc-Morcos
pushed a commit
to Marc-Morcos/navigation2
that referenced
this pull request
Jul 4, 2024
…le (ros-navigation#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com>
SteveMacenski
pushed a commit
that referenced
this pull request
Aug 23, 2024
…le (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com>
SteveMacenski
pushed a commit
that referenced
this pull request
Aug 23, 2024
…le (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com>
SteveMacenski
pushed a commit
that referenced
this pull request
Aug 24, 2024
…le (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com>
SteveMacenski
added a commit
that referenced
this pull request
Aug 24, 2024
* Add configure and cleanup transitions to lifecycle manager and client (#4371) Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> * [RotationShimController] Rotate to goal heading (#4332) When arriving in the goal xy tolerance, the rotation shim controller takes back the control to command the robot to rotate in the goal heading orientation. The initial goal of the rotationShimController was to rotate the robot at the beginning of a navigation towards the paths orientation because some controllers are not good at performing in place rotations. For the same reason, the rotationShimController should be able to rotate the robot towards the goal heading. Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> * [RotationShimController] Fix test for rotate to goal heading (#4289) (#4391) * Fix rotate to goal heading tests Signed-off-by: Antoine Gennart <gennartan@disroot.org> * reset laser_scan_filter before reinit (#4397) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Warn if inflation_radius_ < inscribed_radius_ (#4423) * Warn if inflation_radius_ < inscribed_radius_ Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * convert to error Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> --------- Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * chore: cleanup ros1 leftovers (#4446) Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> * precomputeDistanceHeuristic is now computed once (#4451) Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> * shutdown services in destructor of `ClearCostmapService` (#4495) Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> * min_turning_r_ getting param fix (#4510) * min_turning_r_ getting param fix Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> * Update nav2_mppi_controller/include/nav2_mppi_controller/motion_models.hpp Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> --------- Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Return out of map update if frames mismatch. Signed-off-by Joey Yang (#4517) Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> * check nullptr in smoothPlan() (#4544) * check nullptr in smoothPlan() Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * simple change Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <goesm@buaa.edu.cn> * bump to 1.1.15 Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Revert "Add configure and cleanup transitions to lifecycle manager and client (#4371)" This reverts commit 06ec958. * fix merge conflict with humble sync * fix merge conflict with humble sync --------- Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> Signed-off-by: Antoine Gennart <gennartan@disroot.org> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: Joni Pöllänen <jonipol@users.noreply.github.com> Co-authored-by: Saitama <gennartan@users.noreply.github.com> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: goes <GoesM@buaa.edu.cn> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: Rein Appeldoorn <reinzor@gmail.com> Co-authored-by: Vincent <46542431+VincidaB@users.noreply.github.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com>
SteveMacenski
added a commit
that referenced
this pull request
Aug 24, 2024
* earlier `executor_thread_.reset()` in nav2_costmap_ros (#4385) * reorder cleanup_queue Signed-off-by: goes <GoesM@buaa.edu.cn> * codestyle Signed-off-by: goes <GoesM@buaa.edu.cn> * codestyle Signed-off-by: goes <GoesM@buaa.edu.cn> --------- Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * [RotationShimController] Fix test for rotate to goal heading (#4289) (#4391) * Fix rotate to goal heading tests Signed-off-by: Antoine Gennart <gennartan@disroot.org> * Update bt_service_node.hpp debug msg (#4398) Provide service_name instead of service_node_name for debugging bt_service_node Signed-off-by: João Britto <cbn.joao@gmail.com> * reset laser_scan_filter before reinit (#4397) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Fix error messages (#4411) Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * Warn if inflation_radius_ < inscribed_radius_ (#4423) * Warn if inflation_radius_ < inscribed_radius_ Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * convert to error Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> --------- Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * chore: cleanup ros1 leftovers (#4446) Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> * precomputeDistanceHeuristic is now computed once (#4451) Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> * shutdown services in destructor of `ClearCostmapService` (#4495) Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * Fix world to map coordinate conversion (#4506) Signed-off-by: HovorunBh <fipogh@gmail.com> * fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> * min_turning_r_ getting param fix (#4510) * min_turning_r_ getting param fix Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> * Update nav2_mppi_controller/include/nav2_mppi_controller/motion_models.hpp Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> --------- Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Return out of map update if frames mismatch. Signed-off-by Joey Yang (#4517) Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> * check nullptr in smoothPlan() (#4544) * check nullptr in smoothPlan() Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * simple change Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <goesm@buaa.edu.cn> * check nullPtr in `computeControl()` (#4548) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * bumping to 1.2.10 for release * fixing merge conflict iron --------- Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Antoine Gennart <gennartan@disroot.org> Signed-off-by: João Britto <cbn.joao@gmail.com> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: HovorunBh <fipogh@gmail.com> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: goes <GoesM@buaa.edu.cn> Co-authored-by: Saitama <gennartan@users.noreply.github.com> Co-authored-by: João Britto <cbn.joao@gmail.com> Co-authored-by: Christoph Fröhlich <christophfroehlich@users.noreply.github.com> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: Rein Appeldoorn <reinzor@gmail.com> Co-authored-by: Vincent <46542431+VincidaB@users.noreply.github.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> Co-authored-by: Bohdan <72872431+HovorunBh@users.noreply.github.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com>
SteveMacenski
added a commit
that referenced
this pull request
Aug 24, 2024
* Updated README Table once Jazzy jobs turn over (#4482) * add new Jazzy matrix * missing header * test toolg * retry * done! * trim * trim * fix OS[0] * shutdown services in destructor of `ClearCostmapService` (#4495) Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * adjusting backup speed to be more reasonable (#4501) * Adding Costmap filters to system tests and cleaning up old gazebo classic files (#4502) * removing old files * removing old refs to gazebo classic * porting test body * including in root * Dock panel (#4458) * Initial docking panel Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Only one goal status Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Added dock pose Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Fix size of text Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Update rviz Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Update rviz config Signed-off-by: Alberto Tudela <ajtudela@gmail.com> --------- Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Fix default view (#4504) * Fix logo in nav2 panel (#4505) * Fix logo in nav2 panel Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Move icon Signed-off-by: Alberto Tudela <ajtudela@gmail.com> --------- Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Fix world to map coordinate conversion (#4506) Signed-off-by: HovorunBh <fipogh@gmail.com> * Update README.md Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Add dock id (#4511) * Implement dock id Signed-off-by: redvinaa <redvinaa@gmail.com> * Update tests Signed-off-by: redvinaa <redvinaa@gmail.com> * Update docs Signed-off-by: redvinaa <redvinaa@gmail.com> * Fix virtual override error Signed-off-by: redvinaa <redvinaa@gmail.com> --------- Signed-off-by: redvinaa <redvinaa@gmail.com> * fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle (#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> * min_turning_r_ getting param fix (#4510) * min_turning_r_ getting param fix Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> * Update nav2_mppi_controller/include/nav2_mppi_controller/motion_models.hpp Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> --------- Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * fixing gz sim launch file by using gz directly (#4514) * port wait behavior to new gazebo (#4471) Signed-off-by: stevedan <stevedan.o.omodolor@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Completely rewritten spin, backup, and drive on heading tests to remove flakiness (#4515) * port backup behavior to new gazebo Signed-off-by: stevedan <stevedan.o.omodolor@gmail.com> * port drive on heading behavior to new gazebo Signed-off-by: stevedan <stevedan.o.omodolor@gmail.com> * completely rewritten spin test * lint * complete flaky test rewrite --------- Signed-off-by: stevedan <stevedan.o.omodolor@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: stevedan <stevedan.o.omodolor@gmail.com> * Return out of map update if frames mismatch. Signed-off-by Joey Yang (#4517) Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> * Fix error_code_id (#4522) Signed-off-by: redvinaa <redvinaa@gmail.com> * completely shutdown dyn_params_handler_ (s) (#4521) * completely shutdown dny_params_handler_ in nav2_amcl Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> * completely shutdown dyn_param_handler_ in controller_server Signed-off-by: goes <GoesM@buaa.edu.cn> * compeletly shutdown dyn_params_handler in nav2_costmap_2d Signed-off-by: goes <GoesM@buaa.edu.cn> * compeletly shutdown dyn_param_handler in nav2_docking Signed-off-by: goes <GoesM@buaa.edu.cn> * completely shutdown dyn_params_handler in nav2_velocity_smoother Signed-off-by: goes <GoesM@buaa.edu.cn> * compeletly shutdown dyn_param_handler in waypoint_follower Signed-off-by: goes <GoesM@buaa.edu.cn> * typo fixed Signed-off-by: goes <GoesM@buaa.edu.cn> * graceful-controller & dwb_controller Signed-off-by: goes <GoesM@buaa.edu.cn> * mppi-controller Signed-off-by: goes <GoesM@buaa.edu.cn> * navfn_planner & regulated_..controller Signed-off-by: goes <GoesM@buaa.edu.cn> * rotation_..controller & samc_planners Signed-off-by: goes <GoesM@buaa.edu.cn> * A*planner Signed-off-by: goes <GoesM@buaa.edu.cn> * code style Signed-off-by: goes <GoesM@buaa.edu.cn> * 1 Signed-off-by: goes <GoesM@buaa.edu.cn> * fixed Signed-off-by: goes <GoesM@buaa.edu.cn> * fix the usage of weak_ptr Signed-off-by: goes <GoesM@buaa.edu.cn> * code-style Signed-off-by: goes <GoesM@buaa.edu.cn> * weak_ptr released Signed-off-by: goes <GoesM@buaa.edu.cn> * code style Signed-off-by: goes <GoesM@buaa.edu.cn> * code style Signed-off-by: goes <GoesM@buaa.edu.cn> * code style Signed-off-by: goes <GoesM@buaa.edu.cn> * code style update Signed-off-by: goes <GoesM@buaa.edu.cn> * back Signed-off-by: goes <GoesM@buaa.edu.cn> * rebase conflict resovled Signed-off-by: goes <GoesM@buaa.edu.cn> * rebase error fixed Signed-off-by: goes <GoesM@buaa.edu.cn> * fixed2 Signed-off-by: goes <GoesM@buaa.edu.cn> * rebase fixed 3 Signed-off-by: goes <GoesM@buaa.edu.cn> * 33 Signed-off-by: goes <GoesM@buaa.edu.cn> * shared_ptr into weak_ptr Signed-off-by: GoesM <goesm@buaa.edu.cn> * remove adundant node.resest() Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * check nullptr in smoothPlan() (#4544) * check nullptr in smoothPlan() Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * simple change Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <goesm@buaa.edu.cn> * check nullPtr in `computeControl()` (#4548) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Straight analytic expansions (#4549) * Add test to verify analytic expansions are straight Signed-off-by: James Ward <j.ward@sydney.edu.au> * Use continuous scaling of angle when performing analytic expansion Only applies to Hybrid A* - behaviour in lattice planner is unchanged Signed-off-by: James Ward <j.ward@sydney.edu.au> --------- Signed-off-by: James Ward <j.ward@sydney.edu.au> * Rviz tool to get cost of costmap cell (#4546) * Added GetCost srv Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added Service in costmap_2d Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added Rviz tool Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed Styling Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed Styles and Linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed Linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added Bool use_footprint to srv Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added unit test for costmap costcell cost service Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed unit test script Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added theta, Updated unit test, Updated rviz tool service call logic Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Updated requested changes Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> --------- Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Switch to new-style static_transform_publisher arguments. (#4563) These arguments have been the preferred way to use things since at least Humble. This avoids warnings when running it for the tests. Signed-off-by: Chris Lalancette <clalancette@gmail.com> * Updated slack link (#4565) Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Update README.md (#4589) Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * fix flickering visualization (#4561) * Fix Flickering visualization Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Refactoring Costmap2DPublisher and Costmap2DROS Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Refactoring costmap_2d_ros.cpp Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Refactoring Costmap2DPublisher and Costmap2DROS Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Update costmap_2d_publisher.cpp Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Change map_vis_z from float to double Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Add comment to map_vis_z_ parameter Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> --------- Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Copy fix-terminate diff from opennav_docking repo (#4598) * Copy fix-terminate diff from opennav_docking repo Signed-off-by: redvinaa <redvinaa@gmail.com> * Lint Signed-off-by: redvinaa <redvinaa@gmail.com> --------- Signed-off-by: redvinaa <redvinaa@gmail.com> * Fix race condition in AMCL for #4537 (#4605) * Fixed timed_behavior.hpp (#4602) Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> * Adding new Nav2 loopback simulator (#4614) * adding Nav2 loopback sim Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * drop performance by half * lintin * Add multirobot usecase comment * fixing copy paste error * fixing review comments --------- Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Added laser data from map in nav2_loopback_sim (#4617) * Added laser data from map Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed Linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed Linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed few requested changes Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fixed linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Requested changes Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added parameters and fixed requested changes Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * linting Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Added scan using LineIterator Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * LineIterator max_distance or range_max Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * min of max_distance or range_max Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * final updates working correctly Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Fix lint Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * requested changes Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> * Update nav2_loopback_sim/nav2_loopback_sim/loopback_simulator.py Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Update nav2_loopback_sim/nav2_loopback_sim/loopback_simulator.py Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> --------- Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Making base frame ID for map to base link transform based on base frame ID parameter (#4632) Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Update Smac Planner for rounding to closest bin rather than flooring (#4636) * adding stamped option for loopbacks im (#4637) Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> --------- Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: Alberto Tudela <ajtudela@gmail.com> Signed-off-by: HovorunBh <fipogh@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: redvinaa <redvinaa@gmail.com> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: stevedan <stevedan.o.omodolor@gmail.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: GoesM <goesm@buaa.edu.cn> Signed-off-by: James Ward <j.ward@sydney.edu.au> Signed-off-by: Jatin Patil <jatinpatil2003@gmail.com> Signed-off-by: Chris Lalancette <clalancette@gmail.com> Signed-off-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: Alberto Tudela <ajtudela@gmail.com> Co-authored-by: Bohdan <72872431+HovorunBh@users.noreply.github.com> Co-authored-by: Vince Reda <60265874+redvinaa@users.noreply.github.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Stevedan Ogochukwu Omodolor <61468301+stevedanomodolor@users.noreply.github.com> Co-authored-by: stevedan <stevedan.o.omodolor@gmail.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com> Co-authored-by: James Ward <j.ward@sydney.edu.au> Co-authored-by: Jatin Patil <89979346+JatinPatil2003@users.noreply.github.com> Co-authored-by: Chris Lalancette <clalancette@gmail.com> Co-authored-by: Vladyslav Hrynchak <vladyslav.hrynchak@logivations.com>
RBT22
pushed a commit
to EnjoyRobotics/navigation2
that referenced
this pull request
Sep 26, 2024
* Add configure and cleanup transitions to lifecycle manager and client (ros-navigation#4371) Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> * [RotationShimController] Rotate to goal heading (ros-navigation#4332) When arriving in the goal xy tolerance, the rotation shim controller takes back the control to command the robot to rotate in the goal heading orientation. The initial goal of the rotationShimController was to rotate the robot at the beginning of a navigation towards the paths orientation because some controllers are not good at performing in place rotations. For the same reason, the rotationShimController should be able to rotate the robot towards the goal heading. Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> * [RotationShimController] Fix test for rotate to goal heading (ros-navigation#4289) (ros-navigation#4391) * Fix rotate to goal heading tests Signed-off-by: Antoine Gennart <gennartan@disroot.org> * reset laser_scan_filter before reinit (ros-navigation#4397) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Warn if inflation_radius_ < inscribed_radius_ (ros-navigation#4423) * Warn if inflation_radius_ < inscribed_radius_ Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * convert to error Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> --------- Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * chore: cleanup ros1 leftovers (ros-navigation#4446) Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> * precomputeDistanceHeuristic is now computed once (ros-navigation#4451) Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> * shutdown services in destructor of `ClearCostmapService` (ros-navigation#4495) Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle (ros-navigation#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> * min_turning_r_ getting param fix (ros-navigation#4510) * min_turning_r_ getting param fix Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> * Update nav2_mppi_controller/include/nav2_mppi_controller/motion_models.hpp Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> --------- Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Return out of map update if frames mismatch. Signed-off-by Joey Yang (ros-navigation#4517) Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> * check nullptr in smoothPlan() (ros-navigation#4544) * check nullptr in smoothPlan() Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * simple change Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <goesm@buaa.edu.cn> * bump to 1.1.15 Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Revert "Add configure and cleanup transitions to lifecycle manager and client (ros-navigation#4371)" This reverts commit 06ec958. * fix merge conflict with humble sync * fix merge conflict with humble sync --------- Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> Signed-off-by: Antoine Gennart <gennartan@disroot.org> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: Joni Pöllänen <jonipol@users.noreply.github.com> Co-authored-by: Saitama <gennartan@users.noreply.github.com> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: goes <GoesM@buaa.edu.cn> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: Rein Appeldoorn <reinzor@gmail.com> Co-authored-by: Vincent <46542431+VincidaB@users.noreply.github.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com>
emilnovak
pushed a commit
to EnjoyRobotics/navigation2
that referenced
this pull request
Sep 27, 2024
* replace throw-error with error-log to avoid UAF mentioned in ros-navigation#4175 (ros-navigation#4180) (ros-navigation#4305) * replace throw-error with error-log to avoid UAF * fix typo --------- Signed-off-by: GoesM <GoesM@buaa.edu.cn> Co-authored-by: GoesM <GoesM@buaa.edu.cn> * Cherry-pick from 15c9be0 (ros-navigation#4317) Convert all wall timers and wall rates to ROS clock respecting rates and timers (ros-navigation#4000) * Convert all wall timers and wall rates to ROS clock respecting rates and timers * linty mclint face * WPF wait plugin respect time * move duration metrics to use local clocks * bumping version for cache to break it * complete timing refactor * remove old variable * Add dynamic parameter (ros-navigation#4319) To fix ros-navigation#4315 Signed-off-by: Huy Nguyen Van <34271857+Huyhust13@users.noreply.github.com> * Humble release 11: May 23, 2024 (ros-navigation#4365) * Scale cost critic's weight when dynamically updated (ros-navigation#4246) * Scale cost critic's weight when dynamically updated Signed-off-by: pepisg <pedro.gonzalez@eia.edu.co> * sign off Signed-off-by: pepisg <pedro.gonzalez@eia.edu.co> --------- Signed-off-by: pepisg <pedro.gonzalez@eia.edu.co> * Add expanding the ~/ to the full home dir of user in the path to the map yaml. (ros-navigation#4258) * Add user home expander of home sequence Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Add passing home dir as string instead of const char* Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Add docs Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Fix function declaration Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Fix linter issues Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Uncrustify linter Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Uncrustify linter Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Uncrustify linter: remove remove whitespace Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> --------- Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> * Implement Critic for Velocity Deadband Hardware Constraints (ros-navigation#4256) * Adding new velocity deadband critic. - add some tests - cast double to float - add new features from "main" branch - fix formating - add cost test - fix linting issue - add README Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> * Remove velocity deadband critic from defaults Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> * remove old weight Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> * fix velocity deadband critic tests Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> --------- Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> * removing clearable layer param (unused) (ros-navigation#4280) * provide message validation check API (ros-navigation#4276) * provide validation_message.hpp Signed-off-by: goes <GoesM@buaa.edu.cn> * fix typo Signed-off-by: goes <GoesM@buaa.edu.cn> * add test_validation_messages.cpp Signed-off-by: goes <GoesM@buaa.edu.cn> * change include-order Signed-off-by: goes <GoesM@buaa.edu.cn> * reformat Signed-off-by: goes <GoesM@buaa.edu.cn> * update test Signed-off-by: goes <GoesM@buaa.edu.cn> --------- Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Add footprint clearing for static layer (ros-navigation#4282) * Add footprint clearing for static layer Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * fix flckering --------- Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * Fix ros-navigation#4268 (ros-navigation#4296) Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Update README.md of nav2_bt_navigator (ros-navigation#4309) Update link to docs Signed-off-by: João Britto <cbn.joao@gmail.com> * Fix undefined symbols in `libpf_lib.so` (ros-navigation#4312) When I build `nav2_amcl` with `-Wl,--no-undefined` I noticed `libpf_lib.so` has undefined symbols. This PR correctly links `libpf_lib.so` to `libm` so all symbols can be found. You can verify this by executing the following command: ``` ldd -r ./build/nav2_amcl/src/pf/libpf_lib.so linux-vdso.so.1 (0x00007ffd1f8c0000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x000074e909a00000) /lib64/ld-linux-x86-64.so.2 (0x000074e909e60000) undefined symbol: ceil (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: atan2 (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: sin (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: hypot (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: cos (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: log (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: sqrt (./build/nav2_amcl/src/pf/libpf_lib.so) undefined symbol: floor (./build/nav2_amcl/src/pf/libpf_lib.so) ``` Signed-off-by: Ramon Wijnands <ramon.wijnands@nobleo.nl> * msg validation check for `/initialpose` in `nav2_amcl` (ros-navigation#4301) * add validation check for PoseWithCovarianceStamped Signed-off-by: goes <GoesM@buaa.edu.cn> * remove rebundant check before Signed-off-by: goes <GoesM@buaa.edu.cn> * reformat Signed-off-by: goes <GoesM@buaa.edu.cn> * typo fixed Signed-off-by: goes <GoesM@buaa.edu.cn> * change the type-name Signed-off-by: goes <GoesM@buaa.edu.cn> * update test Signed-off-by: goes <GoesM@buaa.edu.cn> * reformat Signed-off-by: goes <GoesM@buaa.edu.cn> * . Signed-off-by: goes <GoesM@buaa.edu.cn> * add comment Signed-off-by: goes <GoesM@buaa.edu.cn> * update comment Signed-off-by: goes <GoesM@buaa.edu.cn> * change header Signed-off-by: goes <GoesM@buaa.edu.cn> * update test Signed-off-by: goes <GoesM@buaa.edu.cn> * typo fixed Signed-off-by: goes <GoesM@buaa.edu.cn> --------- Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * 4320: Changed precision of calculations of the HybridNode MotionTable::getClosestAngularBin. (ros-navigation#4324) Signed-off-by: Krzysztof Pawełczyk <k.t.pawelczyk@gmail.com> Co-authored-by: Krzysztof Pawełczyk <kpawelczyk@autonomous-systems.pl> * [LifecycleNode] add bond_heartbeat_period (ros-navigation#4342) * add bond_heartbeat_period Signed-off-by: Guillaume Doisy <guillaume@dexory.com> * lint Signed-off-by: Guillaume Doisy <guillaume@dexory.com> --------- Signed-off-by: Guillaume Doisy <guillaume@dexory.com> Co-authored-by: Guillaume Doisy <guillaume@dexory.com> * Update path_longer_on_approach.cpp (ros-navigation#4344) Fix the bug that isPathUpdated function will return false for the reason that it compare the timestaped between new path and old path's last pose Signed-off-by: StetroF <120172218+StetroF@users.noreply.github.com> * [LifecycleManagerClient] clean set_initial_pose and navigate_to_pose (ros-navigation#4346) Signed-off-by: Guillaume Doisy <guillaume@dexory.com> Co-authored-by: Guillaume Doisy <guillaume@dexory.com> * Move projectState after getPointsInside (ros-navigation#4356) * Modify test to check fix Signed-off-by: Brice <brice.renaudeau@gmail.com> * Add static polygon check before simulation Signed-off-by: Brice <brice.renaudeau@gmail.com> --------- Signed-off-by: Brice <brice.renaudeau@gmail.com> * adding final pose in analytic expansion to check (ros-navigation#4353) * fix sync merge conflicts * bump humble to 1.1.15 for release * Revert "[LifecycleNode] add bond_heartbeat_period (ros-navigation#4342)" This reverts commit 6e44178. --------- Signed-off-by: pepisg <pedro.gonzalez@eia.edu.co> Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: João Britto <cbn.joao@gmail.com> Signed-off-by: Ramon Wijnands <ramon.wijnands@nobleo.nl> Signed-off-by: Krzysztof Pawełczyk <k.t.pawelczyk@gmail.com> Signed-off-by: Guillaume Doisy <guillaume@dexory.com> Signed-off-by: StetroF <120172218+StetroF@users.noreply.github.com> Signed-off-by: Brice <brice.renaudeau@gmail.com> Co-authored-by: Pedro Alejandro González <71234974+pepisg@users.noreply.github.com> Co-authored-by: Wiktor Bajor <69388767+Wiktor-99@users.noreply.github.com> Co-authored-by: Sokolov Denis <52282102+perchess@users.noreply.github.com> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: goes <GoesM@buaa.edu.cn> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: João Britto <cbn.joao@gmail.com> Co-authored-by: Ramon Wijnands <ramon.wijnands@nobleo.nl> Co-authored-by: AzaelCicero <k.t.pawelczyk@gmail.com> Co-authored-by: Krzysztof Pawełczyk <kpawelczyk@autonomous-systems.pl> Co-authored-by: Guillaume Doisy <doisyg@users.noreply.github.com> Co-authored-by: Guillaume Doisy <guillaume@dexory.com> Co-authored-by: StetroF <120172218+StetroF@users.noreply.github.com> Co-authored-by: BriceRenaudeau <48433002+BriceRenaudeau@users.noreply.github.com> * adding mutex lock around map resizing due to dynamic parameter changes and associated processes (ros-navigation#4373) (ros-navigation#4378) (cherry picked from commit b0abc78) Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Make BT nodes have configurable wait times (Backport ros-navigation#3960 ros-navigation#4178 ros-navigation#4203) (ros-navigation#4409) * WIP: Make BT nodes have configurable wait times. (ros-navigation#3960) * Make BT nodes have configurable wait times. Previous solution provided hardcoded 1s value. Right now the value can be configured for BT Action, Cancel and Service nodes. [ros-navigation#3920] Signed-off-by: Adam Galecki <embeddedadam@gmail.com> * Make BT nodes have configurable wait times. Previous solution provided hardcoded 1s value. Right now the value can be configured for BT Action, Cancel and Service nodes. [ros-navigation#3920] Signed-off-by: Adam Galecki <embeddedadam@gmail.com> * Fix typos, linting errors and value type from float to int * Fix extra underscores * Fix extra underscore * Update unit tests with blackboard parameter Signed-off-by: Adam Galecki <embeddedadam@gmail.com> * Fix formatting errors Signed-off-by: Adam Galecki <embeddedadam@gmail.com> * Update system tests to match new parameter Signed-off-by: Adam Galecki <embeddedadam@gmail.com> --------- Signed-off-by: Adam Galecki <embeddedadam@gmail.com> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * chore(nav2_behavior_tree): log actual wait period in bt_action_node (ros-navigation#4178) Signed-off-by: Felix <felix@fzeltner.de> Co-authored-by: Felix <felix@fzeltner.de> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * fix missing param declare (ros-navigation#4203) Signed-off-by: nelson <kaichie.lee@gmail.com> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * Fix error messages (ros-navigation#4411) Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> --------- Signed-off-by: Adam Galecki <embeddedadam@gmail.com> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> Signed-off-by: Felix <felix@fzeltner.de> Signed-off-by: nelson <kaichie.lee@gmail.com> Co-authored-by: Adam Gałecki <73710544+embeddedadam@users.noreply.github.com> Co-authored-by: bi0ha2ard <bi0ha2ard@users.noreply.github.com> Co-authored-by: Felix <felix@fzeltner.de> Co-authored-by: nelson <kaichie.lee@gmail.com> * Enable reloading BT xml file with same name (ros-navigation#4209) (ros-navigation#4422) * Let BtActionServer overwrite xml * Make a ROS parameter for it * Rename flag to always reload BT xml file --------- Signed-off-by: Johannes Huemer <johannes.huemer@ait.ac.at> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> Co-authored-by: Johannes Huemer <johannes.huemer@ait.ac.at> * fix bug mentioned in ros-navigation#3958 (ros-navigation#3972) (ros-navigation#4463) * bug fixed * add space * Update planner_server.cpp * add space for code style * add childLifecycleNode mode to costmap_2d_ros * add childLifecycleNode mode to costmap_2d_ros * add childLifecycleNode mode to costmap_2d_ros * add childLifecycleNode mode in costmap_2d_ros * add childLifecycleNode mode in costmap_2d_ros * add childLifecycleNode mode in costmap_2d_ros * add ChildLifecycleNode mode in costmap_2d_ros * NodeOption: is_lifecycle_follower_ * NodeOption: is_lifecycle_follower_ * fit to NodeOption: is_lifecycle_follower_ * NodeOption: is_lifecycle_follower_ * fit to NodeOption: is_lifecycle_follower * fit to NodeOption: is_lifecycle_follower * fit reorder Werror * fix wrong use of is_lifecycle_follower * remove blank line * NodeOption: is_lifecycle_follower_ * NodeOption: is_lifecycle_follower_ * Add files via upload * NodeOption: is_lifecycle_follower_ * NodeOption:is_lifecycle_follower_ * NodeOption:is_lifecycle_follower * NodeOption:is_lifecycle_follower * NodeOption:is_lifecycle_follower * change default * add NodeOption for costmap_2d_ros * add node options for costmap2dros as an independent node * code style reformat * fit to NodeOption of Costmap2DROS * fit to NodeOption of Costmap2DROS * fit to NodeOption of Costmap2DROS * Update nav2_costmap_2d/include/nav2_costmap_2d/costmap_2d_ros.hpp * Update nav2_costmap_2d/include/nav2_costmap_2d/costmap_2d_ros.hpp * Update nav2_costmap_2d/include/nav2_costmap_2d/costmap_2d_ros.hpp * changes * comment changes * change get_parameter into =false * comment modification * missing line * Update nav2_costmap_2d/include/nav2_costmap_2d/costmap_2d_ros.hpp * Update nav2_costmap_2d/include/nav2_costmap_2d/costmap_2d_ros.hpp * delete last line * change lifecycle_test fit to NodeOption --------- Co-authored-by: GoesM <GoesM@buaa.edu.cn> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * bt_service_node and bt_action_node: Don't block BT loop (backport ros-navigation#4214) (ros-navigation#4408) (ros-navigation#4475) * bt_service_node and bt_action_node: Don't block BT loop (ros-navigation#4214) * Set smaller timeout for service node * Fix timeout calculation for service node * Add a feasible timeout also for action node --------- * Increasing test count from timeout handling changes (ros-navigation#4234) --------- Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Behavior tree node for extracting pose from path (ros-navigation#4518) (ros-navigation#4525) * add get pose from path action Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * cleanup from PR suggestions Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * Updates for main compatibility Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * Lint and build fix Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * More Lint and warnings Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * More Lint and build Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * remove code left over from older file Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * fix test blackboard var name Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * only populate pose frame if empty Signed-off-by: MarcM0 <marc.morcos9@gmail.com> * lint Signed-off-by: MarcM0 <marc.morcos9@gmail.com> --------- Signed-off-by: MarcM0 <marc.morcos9@gmail.com> (cherry picked from commit 12a9c1d) Co-authored-by: Marc Morcos <30278842+MarcM0@users.noreply.github.com> * Make ros-navigation#4525 compile on humble (ros-navigation#4526) * Make it compile on humble Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * Remove formatting Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> --------- Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> * Fix backward motion for graceful controller (ros-navigation#4527) (ros-navigation#4566) * Fix backward motion for graceful controller Signed-off-by: Alberto Tudela <ajtudela@gmail.com> * Update smooth_control_law.cpp Signed-off-by: Alberto Tudela <ajtudela@gmail.com> --------- Signed-off-by: Alberto Tudela <ajtudela@gmail.com> (cherry picked from commit d1ad640) Co-authored-by: Alberto Tudela <ajtudela@gmail.com> * nav2_collision_monitor dynamic parameters polygon and source enabled for Humble (ros-navigation#4615) * Copy modification from c2d84df into humble collision_monitor for dynamic parameter enabled in polygon * Add the enabled dynamic parameter for source. Signed-off-by: Enzo Ghisoni <enzo.ghisoni@hotmail.fr> * Start backport action_state_ declaration in collision_monitor_node_test.cpp Signed-off-by: EnzoGhisoni <enzo.ghisoni@botronics.be> --------- Signed-off-by: EnzoGhisoni <enzo.ghisoni@botronics.be> Co-authored-by: EnzoGhisoni <enzo.ghisoni@botronics.be> * Humble release 12: August 23 (ros-navigation#4644) * Add configure and cleanup transitions to lifecycle manager and client (ros-navigation#4371) Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> * [RotationShimController] Rotate to goal heading (ros-navigation#4332) When arriving in the goal xy tolerance, the rotation shim controller takes back the control to command the robot to rotate in the goal heading orientation. The initial goal of the rotationShimController was to rotate the robot at the beginning of a navigation towards the paths orientation because some controllers are not good at performing in place rotations. For the same reason, the rotationShimController should be able to rotate the robot towards the goal heading. Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> * [RotationShimController] Fix test for rotate to goal heading (ros-navigation#4289) (ros-navigation#4391) * Fix rotate to goal heading tests Signed-off-by: Antoine Gennart <gennartan@disroot.org> * reset laser_scan_filter before reinit (ros-navigation#4397) Signed-off-by: goes <GoesM@buaa.edu.cn> Co-authored-by: goes <GoesM@buaa.edu.cn> * Warn if inflation_radius_ < inscribed_radius_ (ros-navigation#4423) * Warn if inflation_radius_ < inscribed_radius_ Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * convert to error Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> --------- Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> * chore: cleanup ros1 leftovers (ros-navigation#4446) Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> * precomputeDistanceHeuristic is now computed once (ros-navigation#4451) Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> * shutdown services in destructor of `ClearCostmapService` (ros-navigation#4495) Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Co-authored-by: GoesM_server <GoesM@buaa.edu.cn> * fix(nav2_costmap_2d): make obstacle layer not current on enabled toggle (ros-navigation#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> * min_turning_r_ getting param fix (ros-navigation#4510) * min_turning_r_ getting param fix Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> * Update nav2_mppi_controller/include/nav2_mppi_controller/motion_models.hpp Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> --------- Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> * Return out of map update if frames mismatch. Signed-off-by Joey Yang (ros-navigation#4517) Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> * check nullptr in smoothPlan() (ros-navigation#4544) * check nullptr in smoothPlan() Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * code-style Signed-off-by: GoesM <goesm@buaa.edu.cn> * simple change Signed-off-by: GoesM <goesm@buaa.edu.cn> --------- Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <goesm@buaa.edu.cn> * bump to 1.1.15 Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * Revert "Add configure and cleanup transitions to lifecycle manager and client (ros-navigation#4371)" This reverts commit 06ec958. * fix merge conflict with humble sync * fix merge conflict with humble sync --------- Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> Signed-off-by: Antoine Gennart <gennartan@disroot.org> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: Joni Pöllänen <jonipol@users.noreply.github.com> Co-authored-by: Saitama <gennartan@users.noreply.github.com> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: goes <GoesM@buaa.edu.cn> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: Rein Appeldoorn <reinzor@gmail.com> Co-authored-by: Vincent <46542431+VincidaB@users.noreply.github.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com> * Fixing ros-navigation#4661: MPPI ackermann reversing taking incorrect sign sometimes (ros-navigation#4664) (ros-navigation#4668) * Fixing ros-navigation#4661: MPPI ackermann reversing taking incorrect sign sometimes Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> * fixing unit test for type implicit cast Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> --------- Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> (cherry picked from commit 7eb47d8) Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> --------- Signed-off-by: GoesM <GoesM@buaa.edu.cn> Signed-off-by: Huy Nguyen Van <34271857+Huyhust13@users.noreply.github.com> Signed-off-by: pepisg <pedro.gonzalez@eia.edu.co> Signed-off-by: Wiktor Bajor <wiktorbajor1@gmail.com> Signed-off-by: Denis Sokolov <denis.sokolov48@gmail.com> Signed-off-by: goes <GoesM@buaa.edu.cn> Signed-off-by: Tony Najjar <tony.najjar.1997@gmail.com> Signed-off-by: Steve Macenski <stevenmacenski@gmail.com> Signed-off-by: João Britto <cbn.joao@gmail.com> Signed-off-by: Ramon Wijnands <ramon.wijnands@nobleo.nl> Signed-off-by: Krzysztof Pawełczyk <k.t.pawelczyk@gmail.com> Signed-off-by: Guillaume Doisy <guillaume@dexory.com> Signed-off-by: StetroF <120172218+StetroF@users.noreply.github.com> Signed-off-by: Brice <brice.renaudeau@gmail.com> Signed-off-by: Adam Galecki <embeddedadam@gmail.com> Signed-off-by: Christoph Froehlich <christoph.froehlich@ait.ac.at> Signed-off-by: Felix <felix@fzeltner.de> Signed-off-by: nelson <kaichie.lee@gmail.com> Signed-off-by: Johannes Huemer <johannes.huemer@ait.ac.at> Signed-off-by: EnzoGhisoni <enzo.ghisoni@botronics.be> Signed-off-by: Joni Pöllänen <joni.pollanen@karelics.fi> Signed-off-by: Antoine Gennart <gennart.antoine@gmail.com> Signed-off-by: Antoine Gennart <gennartan@disroot.org> Signed-off-by: Rein Appeldoorn <rein.appeldoorn@nobleo.nl> Signed-off-by: Vincent Belpois <vincent.belpois@gmail.com> Signed-off-by: GoesM_server <GoesM@buaa.edu.cn> Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Signed-off-by: Ivan Radionov <i.a.radionov@gmail.com.com> Signed-off-by: Joey Yang <joeyyang.ai@gmail.com> Signed-off-by: GoesM <goesm@buaa.edu.cn> Co-authored-by: GoesM <130988564+GoesM@users.noreply.github.com> Co-authored-by: GoesM <GoesM@buaa.edu.cn> Co-authored-by: Benjamin-Tan <tan.benjaminkx@gmail.com> Co-authored-by: Huy Nguyen Van <34271857+Huyhust13@users.noreply.github.com> Co-authored-by: Steve Macenski <stevenmacenski@gmail.com> Co-authored-by: Pedro Alejandro González <71234974+pepisg@users.noreply.github.com> Co-authored-by: Wiktor Bajor <69388767+Wiktor-99@users.noreply.github.com> Co-authored-by: Sokolov Denis <52282102+perchess@users.noreply.github.com> Co-authored-by: Tony Najjar <tony.najjar.1997@gmail.com> Co-authored-by: João Britto <cbn.joao@gmail.com> Co-authored-by: Ramon Wijnands <ramon.wijnands@nobleo.nl> Co-authored-by: AzaelCicero <k.t.pawelczyk@gmail.com> Co-authored-by: Krzysztof Pawełczyk <kpawelczyk@autonomous-systems.pl> Co-authored-by: Guillaume Doisy <doisyg@users.noreply.github.com> Co-authored-by: Guillaume Doisy <guillaume@dexory.com> Co-authored-by: StetroF <120172218+StetroF@users.noreply.github.com> Co-authored-by: BriceRenaudeau <48433002+BriceRenaudeau@users.noreply.github.com> Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com> Co-authored-by: Christoph Fröhlich <christophfroehlich@users.noreply.github.com> Co-authored-by: Adam Gałecki <73710544+embeddedadam@users.noreply.github.com> Co-authored-by: bi0ha2ard <bi0ha2ard@users.noreply.github.com> Co-authored-by: Felix <felix@fzeltner.de> Co-authored-by: nelson <kaichie.lee@gmail.com> Co-authored-by: Johannes Huemer <johannes.huemer@ait.ac.at> Co-authored-by: Marc Morcos <30278842+MarcM0@users.noreply.github.com> Co-authored-by: Alberto Tudela <ajtudela@gmail.com> Co-authored-by: Enzo Ghisoni <33607172+EnzoGhisoni@users.noreply.github.com> Co-authored-by: EnzoGhisoni <enzo.ghisoni@botronics.be> Co-authored-by: Joni Pöllänen <jonipol@users.noreply.github.com> Co-authored-by: Saitama <gennartan@users.noreply.github.com> Co-authored-by: Rein Appeldoorn <reinzor@gmail.com> Co-authored-by: Vincent <46542431+VincidaB@users.noreply.github.com> Co-authored-by: SiddharthaUpase <s1dupase34@gmail.com> Co-authored-by: Kemal Bektas <34746077+bektaskemal@users.noreply.github.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Ivan Radionov <45877502+JJRedmond@users.noreply.github.com> Co-authored-by: Ivan Radionov <i.a.radionov@gmail.com.com> Co-authored-by: Joey Yang <joeyyang.ai@gmail.com>
masf7g
pushed a commit
to quasi-robotics/navigation2
that referenced
this pull request
Oct 23, 2024
…le (ros-navigation#4507) Signed-off-by: Kemal Bektas <kemal.bektas@node-robotics.com> Co-authored-by: Kemal Bektas <kemal.bektas@node-robotics.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Basic Info
Description of contribution in a few bullet points
Description of documentation updates required from your changes
Future work that may be required in bullet points
For Maintainers: