Skip to content

Radio_test_reports

Cedric Beauduffe edited this page Oct 17, 2023 · 4 revisions

The official regulatory holtek test reports are available in REF2 and REF3, and Emitech radio test report in REF9 and REF10.

6.1. Unabiz conducted test report

For informations here you will found some conducted pre-tests made by Unabiz for RC1, RC3 and RC4.

Warning

A shielding footprint has been added on the designs files in order to be able to shield, if needeed during certifications testings phases

The partner implementing the Holtek BC68F2150 on his device design have to match with regulation requirements and shall make all the tests, qualification and reports requested by the local regulation.

This report presented here is partial and cannot be used to prove that the partners device is compliant. It's the responsability of the partner to achieve these measurements.

6.1.1 Below some figures in RC1 conducted mode

  • Operating Channel - CW

RC1 Operating Channel - CW

  • Operating frequency Band - Sweep

RC1 Operating frequency Band - Sweep

  • Spurious Narrow - CW

RC1 Spurious Narrow - CW

  • Spurious Full Band - CW

RC1 Spurious Full Band - CW

  • Spurious XTAL - CW

RC1 Spurious XTAL - CW

6.1.2 Below some figures in RC3 conducted mode

  • Output power

RC3 Output power

  • Spurious narrow

RC3 Spurious narrow

  • Spurious wide band

RC3 Spurious wide band

6.1.3 Below some figures in RC4 conducted mode

  • Spurious Narrow band

RC4 Spurious Narrow band

  • Spurious wide band

RC4 Spurious wide band