Skip to content

GuiRpcProtocol

Vitalii Koshura edited this page Jul 15, 2024 · 4 revisions

GUI RPC Protocol

The GUI RPC protocol lets GUIs like the BOINC Manager communicate with the core client.

Note that the RPC server is the core client, and the RPC client is a GUI or add-on communicating with it (such as BOINC Manager). This may seem confusing but this terminology will be used on the rest of the page.

Basic Structure

The protocol is based on XML, and it's strictly request-reply. The client sends requests to the server, and waits for a reply; the server never sends anything without getting a request from the client first. Both requests and replies are terminated with the control character 0x03.

Self-closing tags must not have a space before the slash, or current client and server will not parse it correctly. For example, send <authorized/>, not <authorized />.

Requests are inside <boinc_gui_rpc_request> elements, and replies from the RPC server are inside <boinc_gui_rpc_reply> elements (in both cases there is a 0x03 byte after the closing tag). The current RPC server implementation doesn't require the <boinc_gui_rpc_request> tag, which is handy for debugging (you can connect via netcat and just type <auth1/>); however, clients must not rely on this, and must always send the <boinc_gui_rpc_request> root tag.

The current RPC server doesn't support pipelining of requests (pipelining means sending a batch of multiple requests without waiting for a reply, then getting all the replies together; this improves latency). For compatibility, pipelining must not be used.

To terminate the RPC session, just close the connection on the client side. Warning: some protocols have a specific "quit" command for this. The GUI RPC protocol has a <quit/> command, but it has a completely different purpose: telling the core client to quit!

Every request has the following structure:

<boinc_gui_rpc_request>
  <request>
  </request>
</boinc_gui_rpc_request>\003

where <request> is a placeholder for one of the actual requests that are listed later.

Self-closing tags could also be used for requests that do not require data to be passed to the client. Their structure is the following:

<boinc_gui_rpc_request>
  <request/>
</boinc_gui_rpc_request>\003

Common replies

If a command requires authentication but the client hasn't authenticated yet, the RPC server will reply

<boinc_gui_rpc_reply>
  <unauthorized/>
</boinc_gui_rpc_reply>\003

The client should be prepared to receive this in reply to any command.

Successful commands usually get the reply:

<boinc_gui_rpc_reply>
    <success/>
</boinc_gui_rpc_reply>\003

although individual commands, especially those that retrieve data, may return the requested information instead of <success/>.

If a command isn't successful, the reply is:

<boinc_gui_rpc_reply>
    <error>human-readable error message</error>
</boinc_gui_rpc_reply>\003

Clients should not try to parse the error message. The current gui_rpc_client.cpp library sometimes tries to parse errors, but this is very unreliable, since the message wording can change (and has changed) between RPC server versions. (Commit 63b49cd2 even changed "unrecognized op".)

Authentication

The RPC protocol allows the RPC client to authenticate itself using a password. Most RPC operations can only be done by an authenticated client. Some can be done without authentication, but only by a client running on the same machine.

Authentication on the RPC protocol is password-based, and negotiated with a challenge-response system. To initiate the authentication process, send an <auth1/> command:

<boinc_gui_rpc_request>
    <auth1/>
</boinc_gui_rpc_request>\003

The response will be the authentication challenge:

<boinc_gui_rpc_reply>
    <nonce>1198959933.057125</nonce>
</boinc_gui_rpc_reply>\003

The value of nonce is to be used as a salt with the password. It is randomly generated for each request. To calculate the response, concatenate the nonce and the password (nonce first), then calculate the MD5 hash of the result, i.e: md5(nonce+password). Finally, send an <auth2> request with the calculated hash, in lowercase hexadecimal format.

<boinc_gui_rpc_request>
    <auth2>
        <nonce_hash>d41d8cd98f00b204e9800998ecf8427e</nonce_hash>
    </auth2>
</boinc_gui_rpc_request>\003

The reply will be either <authorized/> or <unauthorized/>.

If the client hasn't authenticated yet, and it is connecting remotely (ie. not via localhost), <auth1/> is the only command that can be sent, and all other commands will return <unauthorized/>.

Common XML elements

There are some XML elements (like <project>, <result>, <workunit>, and <app>) that are common to many command replies. Such elements will be documented in this section.

The XML responses are relatively flat, and are parsed in one pass. The relationship between XML elements is determined by what was parsed before it, instead of based on the tree hierarchy like other XML formats do. For example, <result> elements that come after a particular <project> element are results that belong to that project. They won't be inside the <project> element.

Requests and Replies

These are the requests that can be issued to the client and the replies that are expected. The requests are placed between the opening and closing <boinc_gui_rpc_request> tags. The replies are described without the enclosing <boinc_gui_rpc_reply> tags.


The following requests do not require local authorisation.


exchange_versions

Used to get the version of the running core client and send the version of the request's source.

Request:

<exchange_versions>
    <major></major>
    <minor></minor>
    <release></release>
</exchange_versions>

The sending of the source's version is optional and a simple:

</exchange_versions>

would suffice to get the version of the running core client.

Reply:

<server_version>
    <major></major>
    <minor></minor>
    <release></release>
 </server_version>

get_all_projects_list

Used to get a list of all the projects as found in the all_projects_list.xml file.

Request:

<get_all_projects_list/>

Reply:

<?xml version="1.0" encoding="ISO-8859-1" ?>
<projects>
    <project>
        <name></name>
        <url></url>
        <general_area></general_area>
        <specific_area></specific_area>
        <description><![CDATA[]]></description>
        <home></home>
    <platforms>
        <name></name>
        <name></name>
        <name></name>
        .
        .
        .
    </platforms>
      <summary></summary>
    </project>
    .
    .
    .
</projects>

get_cc_status

Show CPU/GPU/network run modes and network connection status (version 6.12+)

Request:

<get_cc_status/>

Reply:

<cc_status>
    <network_status></network_status>
    <ams_password_error></ams_password_error>
    <task_suspend_reason></task_suspend_reason>
    <task_mode></task_mode>
    <task_mode_perm></task_mode_perm>
    <task_mode_delay></task_mode_delay>
    <gpu_suspend_reason></gpu_suspend_reason>
    <gpu_mode></gpu_mode>
    <gpu_mode_perm></gpu_mode_perm>
    <gpu_mode_delay></gpu_mode_delay>
    <network_suspend_reason></network_suspend_reason>
    <network_mode></network_mode>
    <network_mode_perm></network_mode_perm>
    <network_mode_delay></network_mode_delay>
    <disallow_attach></disallow_attach>
    <simple_gui_only></simple_gui_only>
    <max_event_log_lines></max_event_log_lines>
</cc_status>

get_disk_usage

Show disk usage by project

Request:

<get_disk_usage/>

Reply:

<disk_usage_summary>
    <project>
        <master_url></master_url>
        <disk_usage></disk_usage>
    </project>
    <d_total></d_total>
    <d_free></d_free>
    <d_boinc></d_boinc>
    <d_allowed></d_allowed>
</disk_usage_summary>

get_daily_xfer_history

Show network traffic history of the BOINC client. Read from daily_xfer_history.xml

Request:

<get_daily_xfer_history/>

Reply:

<daily_xfers>
    <dx>
        <when></when>
        <up></up>
        <down></down>
    </dx>
    .
    .
    .
</daily_xfers>

get_file_transfers

Show all current file transfers

Request:

<get_file_transfers/>

Reply:

<file_transfers>
    <file_transfer>
        <project_url></project_url>
        <project_name></project_name>
        <name></name>
        <nbytes></nbytes>
        <max_nbytes></max_nbytes>
        <status></status>
        <persistent_file_xfer>
            <num_retries></num_retries>
            <first_request_time></first_request_time>
            <next_request_time></next_request_time>
            <time_so_far></time_so_far>
            <last_bytes_xferred></last_bytes_xferred>
            <is_upload></is_upload>
        </persistent_file_xfer>
        <file_xfer>
            <bytes_xferred></bytes_xferred>
            <file_offset></file_offset>
            <xfer_speed></xfer_speed>
            <url></url>
        </file_xfer>
    </file_transfer>
    .
    .
    .
</file_transfers>

get_host_info

Get information about host hardware and usage

Request:

<get_host_info/>

Reply:

<host_info>
    <timezone></timezone>
    <domain_name></domain_name>
    <ip_addr></ip_addr>
    <host_cpid></host_cpid>
    <p_ncpus></p_ncpus>
    <p_vendor></p_vendor>
    <p_model></p_model>
    <p_features></p_features>
    <p_fpops></p_fpops>
    <p_iops></p_iops>
    <p_membw></p_membw>
    <p_calculated></p_calculated>
    <p_vm_extensions_disabled></p_vm_extensions_disabled>
    <m_nbytes></m_nbytes>
    <m_cache></m_cache>
    <m_swap></m_swap>
    <d_total></d_total>
    <d_free></d_free>
    <os_name></os_name>
    <os_version></os_version>
    <product_name></product_name>
    <virtualbox_version></virtualbox_version>
    <coprocs>
        <coproc_intel_gpu>
            <count></count>
            <name></name>
            <available_ram></available_ram>
            <have_opencl></have_opencl>
            <peak_flops></peak_flops>
            <version></version>
            <coproc_opencl>
                <name></name>
                <vendor></vendor>
                <vendor_id></vendor_id>
                <available></available>
                <half_fp_config></half_fp_config>
                <single_fp_config></single_fp_config>
                <double_fp_config></double_fp_config>
                <endian_little></endian_little>
                <execution_capabilities></execution_capabilities>
                <extensions></extensions>
                <global_mem_size></global_mem_size>
                <local_mem_size></local_mem_size>
                <max_clock_frequency></max_clock_frequency>
                <max_compute_units></max_compute_units>
                <nv_compute_capability_major></nv_compute_capability_major>
                <nv_compute_capability_minor></nv_compute_capability_minor>
                <amd_simd_per_compute_unit></amd_simd_per_compute_unit>
                <amd_simd_width></amd_simd_width>
                <amd_simd_instruction_width></amd_simd_instruction_width>
                <opencl_platform_version></opencl_platform_version>
                <opencl_device_version></opencl_device_version>
                <opencl_driver_version></opencl_driver_version>
            </coproc_opencl>
        </coproc_intel_gpu>
    </coprocs>
    <opencl_cpu_prop>
        <platform_vendor></platform_vendor>
        <opencl_cpu_info>
            <name></name>
            <vendor></vendor>
            <vendor_id></vendor_id>
            <available></available>
            <half_fp_config></half_fp_config>
            <single_fp_config></single_fp_config>
            <double_fp_config></double_fp_config>
            <endian_little></endian_little>
            <execution_capabilities></execution_capabilities>
            <extensions></extensions>
            <global_mem_size></global_mem_size>
            <local_mem_size></local_mem_size>
            <max_clock_frequency></max_clock_frequency>
            <max_compute_units></max_compute_units>
            <nv_compute_capability_major></nv_compute_capability_major>
            <nv_compute_capability_minor></nv_compute_capability_minor>
            <amd_simd_per_compute_unit></amd_simd_per_compute_unit>
            <amd_simd_width></amd_simd_width>
            <amd_simd_instruction_width></amd_simd_instruction_width>
            <opencl_platform_version></opencl_platform_version>
            <opencl_device_version></opencl_device_version>
            <opencl_driver_version></opencl_driver_version>
        </opencl_cpu_info>
    </opencl_cpu_prop>
</host_info>

get_messages

Show messages with sequence numbers beyond the given seqno

Request:

<get_messages>
    <seqno></seqno>
    <translatable/>
</get_messages>

The <translatable/> tag is optional.

Reply:

<msgs>
    <msg>
        <project></project>
        <pri></pri>
        <seqno></seqno>
        <body><![CDATA[]]></body>
        <time></time>
    </msg>
    .
    .
    .
</msgs>

get_message_count

Show largest message seqno

Request:

<get_message_count/>

Reply:

<seqno></seqno>

get_newer_version

Get newer version number, if any, and download url

Request:

<get_newer_version/>

Reply:

<newer_version></newer_version>
<download_url></download_url>

get_notices_public

Returns only non-private notices, doesn't require authentication

Request:

<get_notices_public>
    <seqno></seqno>
</get_notices_public>

Reply:

<notices>
    <notice>
        <title></title>
        <description><![CDATA[]]></description>
        <create_time></create_time>
        <arrival_time></arrival_time>
        <is_private></is_private>
        <project_name></project_name>
        <category></category>
        <link></link>
        <seqno></seqno>
    </notice>
    .
    .
    .
</notices>

get_old_results

Show old tasks

Request:

<get_old_results/>

Reply:

<old_results>
    <old_result>
        <project_url></project_url>
        <result_name></result_name>
        <app_name></app_name>
        <exit_status></exit_status>
        <elapsed_time></elapsed_time>
        <cpu_time></cpu_time>
        <completed_time></completed_time>
        <create_time></create_time>
    </old_result>
    .
    .
    .
</old_results>

get_project_status

Show status of all attached projects

Request:

<get_project_status/>

Reply:

<projects>
    <project>
        <master_url></master_url>
        <project_name></project_name>
        <symstore></symstore>
        <user_name></user_name>
        <team_name></team_name>
        <host_venue></host_venue>
        <email_hash></email_hash>
        <cross_project_id></cross_project_id>
        <external_cpid></external_cpid>
        <cpid_time></cpid_time>
        <user_total_credit></user_total_credit>
        <user_expavg_credit></user_expavg_credit>
        <user_create_time></user_create_time>
        <rpc_seqno></rpc_seqno>
        <userid></userid>
        <teamid></teamid>
        <hostid></hostid>
        <host_total_credit></host_total_credit>
        <host_expavg_credit></host_expavg_credit>
        <host_create_time></host_create_time>
        <nrpc_failures></nrpc_failures>
        <master_fetch_failures></master_fetch_failures>
        <min_rpc_time></min_rpc_time>
        <next_rpc_time></next_rpc_time>
        <rec></rec>
        <rec_time></rec_time>
        <resource_share></resource_share>
        <desired_disk_usage></desired_disk_usage>
        <duration_correction_factor></duration_correction_factor>
        <sched_rpc_pending></sched_rpc_pending>
        <send_time_stats_log></send_time_stats_log>
        <send_job_log></send_job_log>
        <njobs_success></njobs_success>
        <njobs_error></njobs_error>
        <elapsed_time></elapsed_time>
        <last_rpc_time></last_rpc_time>

        (<anonymous_platform/>)
        (<master_url_fetch_pending/>)
        (<trickle_up_pending/>)
        (<send_full_workload/>)
        (<dont_use_dcf/>)
        (<non_cpu_intensive/>)
        (<verify_files_on_app_start/>)
        (<suspended_via_gui/>)
        (<dont_request_more_work/>)
        (<detach_when_done/>)
        (<ended/>)
        (<attached_via_acct_mgr/>)
        (<scheduler_rpc_in_progress/>)
        (<use_symlinks/>)

        <rsc_backoff_time>
            <name>intel_gpu</name>
            <value></value>
        </rsc_backoff_time>
        <rsc_backoff_interval>
            <name></name>
            <value></value>
        </rsc_backoff_interval>
        .
        .
        .
        <no_rsc_ams></no_rsc_ams>
        <no_rsc_apps></no_rsc_apps>
        <no_rsc_pref></no_rsc_pref>
        <no_rsc_config></no_rsc_config>
        <ams_resource_share_new></ams_resource_share_new>
        <gui_urls>
            <gui_url>
                <name></name>
                <description></description>
                <url></url>
            </gui_url>
            .
            .
            .
        </gui_urls>
        <sched_priority></sched_priority>
        <project_files_downloaded_time></project_files_downloaded_time>
        <download_backoff></download_backoff>
        <upload_backoff></upload_backoff>
        <venue></venue>
        <project_dir></project_dir>
        <scheduler_url></scheduler_url>
        <code_sign_key></code_sign_key>
        <trickle_up_url></trickle_up_url>
        <cpu_ec></cpu_ec>
        <cpu_time></cpu_time>
        <gpu_ec></gpu_ec>
        <gpu_time></gpu_time>
    </project>
    .
    .
    .
</projects>

get_results

Show tasks

Request:

<get_results>
    <active_only></active_only>
</get_results>

Reply:

<results>
    <result>
        <name></name>
        <wu_name></wu_name>
        <platform></platform>
        <version_num></version_num>
        <plan_class></plan_class>
        <project_url></project_url>
        <final_cpu_time></final_cpu_time>
        <final_elapsed_time></final_elapsed_time>
        <exit_status></exit_status>
        <state></state>
        <report_deadline></report_deadline>
        <received_time></received_time>
        <estimated_cpu_time_remaining></estimated_cpu_time_remaining>
        <project_suspended_via_gui/>
        <report_immediately/>
        <active_task>
            <active_task_state></active_task_state>
            <app_version_num></app_version_num>
            <slot></slot>
            <pid></pid>
            <scheduler_state></scheduler_state>
            <checkpoint_cpu_time></checkpoint_cpu_time>
            <fraction_done></fraction_done>
            <current_cpu_time></current_cpu_time>
            <elapsed_time></elapsed_time>
            <swap_size></swap_size>
            <working_set_size></working_set_size>
            <working_set_size_smoothed></working_set_size_smoothed>
            <page_fault_rate></page_fault_rate>
            <bytes_sent></bytes_sent>
            <bytes_received></bytes_received>
            <progress_rate></progress_rate>
        </active_task>
        .
        .
        .
        <resources></resources>
    </result>
    .
    .
    .
</results>

get_screensaver_tasks

Show suspend reason and active tasks

Request:

<get_screensaver_tasks/>

Reply:

<handle_get_screensaver_tasks>
    <suspend_reason></suspend_reason>
    <active_task>
            <active_task_state></active_task_state>
            <app_version_num></app_version_num>
            <slot></slot>
            <pid></pid>
            <scheduler_state></scheduler_state>
            <checkpoint_cpu_time></checkpoint_cpu_time>
            <fraction_done></fraction_done>
            <current_cpu_time></current_cpu_time>
            <elapsed_time></elapsed_time>
            <swap_size></swap_size>
            <working_set_size></working_set_size>
            <working_set_size_smoothed></working_set_size_smoothed>
            <page_fault_rate></page_fault_rate>
            <bytes_sent></bytes_sent>
            <bytes_received></bytes_received>
            <progress_rate></progress_rate>
        </active_task>
        .
        .
        .
</handle_get_screensaver_tasks>

get_simple_gui_info

Show status of projects and active tasks

Request:

<get_simple_gui_info/>

Reply:

<simple_gui_info>
    <project>
        .
        .
        .
    </project>
    <result>
        .
        .
        .
    </result>
</simple_gui_info>

get_state

Get the entire state

Request:

<get_state/>

Reply:

<client_state>
    <host_info>
    </host_info>
    <net_stats>
    </net_stats>
    <time_stats>
    </time_stats>
    <project>
    </project>
    .
    .
    .
    <app>
    </app>
    .
    .
    .
    <app_version>
    </app_version>
    .
    .
    .
    <workunit>
    </workunit>
    .
    .
    .
    <result>
        <active_task>
        </active_task>
    </result>
    .
    .
    .
    platform_name></platform_name>
    <core_client_major_version></core_client_major_version>
    <core_client_minor_version></core_client_minor_version>
    <core_client_release></core_client_release>
    <executing_as_daemon></executing_as_daemon>
    <platform></platform>
    <global_preferences>
        .
        .
        .
    </global_preferences>
</client_state>

get_statistics

Get statistics for the projects the client is attached to

Request:

<get_statistics/>

Reply:

<statistics>
<project_statistics>
        <master_url></master_url>
        <daily_statistics>
            <day></day>
            <user_total_credit></user_total_credit>
            <user_expavg_credit></user_expavg_credit>
            <host_total_credit></host_total_credit>
            <host_expavg_credit></host_expavg_credit>
        </daily_statistics>
        .
        .
        .
    </project_statistics>
    .
    .
    .
</statistics>

The following requests require local authentication

In this section the replies fall in one of three categories. For requests that retrieve data the replies depend on the kind of data that is retrieved. For control of the client operations they are either:

<success/>

upon a successful request, or:

<error>human-readable error message</error>

upon an unsuccessful request.

If the request retrieves data the reply will be documented. Otherwise only requests will be documented.

See also ( Common Replies )

File transfer operations


abort_file_transfer

Abort a pending file transfer

Request:

<abort_file_transfer>
    <project_url></project_url>
    <filename></filename>
</abort_file_transfer>

retry_file_transfer

Retry a file transfer (Client will need temporary network access)

Request:

<retry_file_transfer>
    <project_url></project_url>
    <filename></filename>
</retry_file_transfer>

Task operations


abort_result

Abort a task

Request:

<abort_result>
    <project_url></project_url>
    <name></name>
</abort_result>

suspend_result

Suspend a running task (Note: Even if a task is already suspended the request will return success)

Request:

<suspend_result>
    <project_url></project_url>
    <name></name>
</suspend_result>

resume_result

Resume a suspended task (Note: Even if a task is already running the request will return success)

Request:

<resume_result>
    <project_url></project_url>
    <name></name>
</resume_result>

Project operations


project_reset

Reset a project (Client will need temporary network access)

Request:

<project_reset>
    <project_url></project_url>
</project_reset>

project_detach

Detach from a project

Request:

<project_detach>
    <project_url></project_url>
</project_detach>

project_update

Update a project (Client will need temporary network access)

Request:

<project_update>
    <project_url></project_url>
</project_update>

project_suspend

Suspend a project

Request:

<project_suspend>
    <project_url></project_url>
</project_suspend>

project_resume

Resume a project

Request:

<project_resume>
    <project_url></project_url>
</project_resume>

project_nomorework

Stop getting new tasks for a project

Request:

<project_nomorework>
    <project_url></project_url>
</project_nomorework>

project_allowmorework

Receive new tasks for a project. Reverse project_nomorework.

Request:

<project_allowmorework>
    <project_url></project_url>
</project_allowmorework>

project_detach_when_done

Detach from a project after all it's tasks are finished.

Request:

<project_detach_when_done>
    <project_url></project_url>
</project_detach_ahen_done>

project_dont_detach_when_done

Don't detach from a project after all it's tasks are finished. Reverse project_detach_when_done

Request:

<project_dont_detach_when_done>
    <project_url></project_url>
</project_dont_detach_ahen_done>

project_attach

Attach the client to a project. There are two kinds of requests. One using a project_init.xml file with all the necessary data and one not. (Client will need temporary network access)

Request using file:

<project_attach>
    <use_config_file/>
</project_attach>

Request not using file:

<project_attach>
    <project_url></project_url>
    <authenticator></authenticator>
    <project_name></project_name>
</project_attach>

This request is asynchronous. This means that it will reply immediately with either <success/> or an error concerning missing or malformated input. Another kind of possible error is: <error>Already attached to project</error>.

Note: <success/> does not mean that the attachment was successful but that the request was made successfuly.

To see if the attachment was successful the request <project_attach_poll/> has to be made.

project_attach_poll

The aforementioned request. (Client will need temporary network access)

Request:

<project_attach_poll/>

Reply:

<project_attach_reply>
    [<message></message>]
    [         .         ]
    [         .         ]
    [         .         ]
    <error_num></error_num>
</project_attach_reply>

Note: A source of confusion could be the fact that the <project_attach_poll>request will only return errors associated with the attachment process. If a user attaches to a non existing project or uses an invalid authenticator but the attachment per se has no errors the request will return with 0 exit code. In that case the client's messages will have to be checked.

get_project_init_status

Get the contents of the project_init.xml file if present

Request:

<get_project_init_status/>

Reply:

<get_project_init_status>
    <url></url>
    <name></name>
    <team_name></team_name>
    <setup_cookie></setup_cookie>
</get_project_init_status>

get_project_config

Fetch the project configuration file from the specified url. Asynchronous request. (Client will need temporary network access)

Request:

<get_project_config>
    <url></url>
</get_project_config>

get_project_config_poll

The polling call for the previous request. Not a check for the successful fetching of the file but of the successful request. (Client will need temporary network access)

Request:

<get_project_config_poll/>

Reply:

Successful request:

[<project_config>]
[        .       ]
[        .       ]
[        .       ]
</project_config>

Unsuccessful request:

<project_config>
    <error_num></error_num>
</project_config>

Account operations (all require network access)


create_account

Create an account for a given project. Asynchronous call

Request:

<create_account>
    <url></url>
    <email_addr></email_addr>
    <passwd_hash></passwd_hash>
    <user_name></user_name>
    <team_name></team_name>
</create_account>

create_account_poll

The polling call for the previous request

Request:

<create_account_poll/>

lookup_account

Look for an account in a given project. Asynchronous call.

Request:

<lookup_account>
    <url></url>
    <email_addr></email_addr>
    <passwd_hash></passwd_hash>
    <ldap_auth></ldap_auth>
    <server_assigned_cookie></server_assigned_cookie>
    <server_cookie></server_cookie>
</lookup_account>

lookup_account_poll

The polling call for the previous request. This request is designed to be used within the context of a function (e.g. inside boinccmd's --lookup_account) and the results to be printed by an appropriate function (e.g. ACCOUNT_OUT::print()) so it will not be very useful as a standalone RPC call. To get the same functionality as the above command within the context of an RPC the lookup_account.php script can be used.

Request:

<lookup_account_poll/>

Account manager operations


acct_mgr_info

Retrieve account manager information

Request:

<acct_mgr_info/>

Reply:

<acct_mgr_info>
   <acct_mgr_url></acct_mgr_url>
   <acct_mgr_name></acct_mgr_name>
   (<have_credentials/>)
   (<cookie_required/>)
   (<cookie_failure_url></cookie_failure_url>)
</acct_mgr_info>

acct_mgr_rpc

Make an rpc to an account manager. (Client will need temporary network access). It has three uses. Used by the --join_acct_mgr command of the boinccmd) tool to join an account manager. Used by the same tool's --quit_acct_mgrcommand with null arguments to quit an account manager. And lastly used to trigger an RPC to the current account manager.

There are two requests depending on whether there is a file with the necessary data or not.

Using said file:

<acct_mgr_rpc>
    <use_config_file/>
</acct_mgr_rpc>

Not using it:

<acct_mgr_rpc>
    <url></url>
    <name></name>
    <password></password>
</acct_mgr_rpc>

This request is asynchronous. It returns immediately with either <success/>or one of the following errors: <error>bad arg</error> or <error>unrecognized op: act_mgr_rpc</error>. To get the results of the request a call to <acct_mgr_rpc_poll/> has to be made.

acct_mgr_rpc_poll

The previously mentioned call. (Client will need temporary network access)

Request:

<acct_mgr_rpc_poll/>

Reply:

<acct_mgr_rpc_reply>
    [<message></message>]
    <error_num></error_num>
</acct_mgr_rpc_reply>

Global preferences operations


get_global_prefs_file

Get the contents of the global_prefs.xml file if present

Request:

<get_global_prefs_file/>

Reply:

<global_preferences>
         .
         .
         .
</global_preferences>

get_global_prefs_override

Get the contents of the global_prefs_override.xml file if present

Request:

<get_global_prefs_override/>

Reply:

<global_preferences>
         .
         .
         .
</global_preferences>

set_global_prefs_override

Write the global_prefs_override.xml file

Request:

<set_global_prefs_override>
    <global_preferences>
             .
             .
             .
    </global_preferences>
</set_global_prefs_override>

read_global_prefs_override

Read the global_prefs_override.xml file and set the preferences accordingly

Request:

<read_global_prefs_override/>

get_global_prefs_working

Get the currently used global_prefs

Request:

<get_global_prefs_working/>

Reply:

<global_preferences>
         .
         .
         .
</global_preferences>

Other operations


get_notices

Returns both private and non-private notices

Request:

<get_notices>
    <seqno></seqno>
</get_notices>

Reply:

<notices>
    <notice>
        <title></title>
        <description><![CDATA[]]></description>
        <create_time></create_time>
        <arrival_time></arrival_time>
        <is_private></is_private>
        <project_name></project_name>
        <category></category>
        <link></link>
        <seqno></seqno>
    </notice>
    .
    .
    .
</notices>

set_host_info

Set the product_name field of host_info

Request:

<set_host_info>
    <host_info>
        <product_name></product_name>
    </host_info>
</set_host_info>

run_benchmarks

Run benchmarks

Request:

<run_benchmarks/>

get_proxy_settings

Get the proxy settings

Request:

<get_proxy_settings/>

Reply:

<proxy_info>
    [<use_http_proxy/>]
    [<use_socks_proxy/>]
    [<use_http_auth/>]
    <socks_server_name></socks_server_name>
    <socks_server_port></socks_server_port>
    <http_server_name></http_server_name>
    <http_server_port></http_server_port>
    <socks5_user_name></socks5_user_name>
    <socks5_user_passwd></socks5_user_passwd>
    <socks5_remote_dns></socks5_remote_dns>
    <http_user_name></http_user_name>
    <http_user_passwd></http_user_passwd>
    <no_autodetect></no_autodetect>
    <no_proxy></no_proxy>
    [<autodetect_protocol></autodetect_protocol>]
    [<autodetect_server_name></autodetect_server_name>]
    [<autodetect_port></autodetect_port>]
</proxy_info>

network_available

Retry deferred network communication

Request:

<network_available/>

quit

Tell client to exit

Request:

<quit/>

set_language

Set the language field in the client_state.xml file to append it in any subsequent GET calls to the original URL and translate notices

Request:

<set_language>
    <language></language>
</set_language>

set_network_mode

Set the network mode for given duration (in seconds)

Request:

<set_network_mode>
    [<always/>]
    [<never/>]
    [<auto/>]
    [<restore/>]
    <duration></duration>
</set_network_mode>

set_gpu_mode

Set GPU run mode for given duration (in seconds)

Request:

<set_gpu_mode>
    [<always/>]
    [<never/>]
    [<auto/>]
    [<restore/>]
    <duration></duration>
</set_gpu_mode>

set_run_mode

Set run mode for given duration (in seconds)

Request:

<set_run_mode>
    [<always/>]
    [<never/>]
    [<auto/>]
    [<restore/>]
    <duration></duration>
</set_run_mode>

set_proxy_settings

Set the proxy settings

Request:

<set_proxy_settings>
    <proxy_info>
        [<use_http_proxy/>]
        [<use_socks_proxy/>]
        [<use_http_auth/>]
        <http_server_name></http_server_name>
        <http_server_port></http_server_port>
        <http_user_name></http_user_name>
        <http_user_passwd></http_user_passwd>
        <socks_server_name></socks_server_name>
        <socks_server_port></socks_server_port>
        <socks5_user_name></socks5_user_name>
        <socks5_user_passwd></socks5_user_passwd>
        <socks5_remote_dns></socks5_remote_dns>
        <no_proxy></no_proxy>
    </proxy_info>
</set_proxy_settings>

get_cc_config

Get the contents of the cc_config.xml file if present

Request:

<get_cc_config/>

Reply: The contents of the file.

read_cc_config

Read the cc_config.xml file and set the configuration accordingly. If no such file is present or it's contents are not formatted correctly the defaults are used.

Request:

<read_cc_config/>

set_cc_config

Write a new cc_config.xml file

Request:

<set_cc_config>
      .
      .
      .
</set_cc_config>

get_app_config

Get the contents of the app_config.xml file if present

Request:

<get_app_config>
    <url></url>
</get_app_config>

Reply: The contents of the file.

set_app_config

Write a new app_config.xml file

Request:

<set_app_config>
    <url></url>
      .
      .
      .
</set_app_config>

report_device_status

Used to report the status of an android device to the client. This is used to more easily access the status of the device. It essentially extracts the information using the, written in JAVA, Android GUI and using the RPC passes them to the client (a kind of bridge between Android's JAVA interface and the client's C++ one). It is therefore not of any use to be documented here.

Clone this wiki locally