Skip to content
This repository has been archived by the owner on May 17, 2021. It is now read-only.

Resol VBUS Binding

Michael Heckmann edited this page Aug 30, 2015 · 7 revisions

ResolVBUS Binding WIKI

Introduction

This binding is for users who want to read their RESOL Controller (mostly used for solar heat) values.

For installation of the binding, please see Wiki page Bindings.

Binding configuration

First of all you need to introduce your Resol Controller in the openhab.cfg file (in the folder '${openhab_home}/configurations'). Both versions (LAN and serial/USB) are supported.

############################### Resol VBUS Binding ###################################`
#Either use serialport or host and port, depending on configuration`
#if the device is attached to a Resol VBUS LAN Interface provide IP and Port`
resolvbus:host=192.168.1.1`
resolvbus:port=7053`
#(optional) Password, if changed.`
#resolvbus:password=`
#if the device is attached to the serialport use this line`
#resolvbus:serialport=/dev/ttyUSB0`
# Updateinterval (optional, in seconds, defaults 1): How often should the values be updated`
resolvbus:updateinterval=10`
#(optional) the device id, if the binding doesn't detect the id itself`
#resolvbus:updateinterval=`

Item Binding Configuration

In order to bind an item to the device, you need to provide configuration settings. The easiest way to do so is to add some binding information in your item file (in the folder configurations/items`). The syntax of the binding configuration strings accepted is the following:

resolvbus="name of the value"

The name of the value depends on the device you're using and the values it supports. Please refer to this page to find the right values.

A sample configuration could look like:

This item will show the value of the temperature sensor 1 of your device:

Number TempSensor1 "Temperatur Sensor 1 [%.1f °C]" {resolvbus="Temperatur sensor 1"}

This item will show the pump speed of your pump

Number PumpSpeed "PumpSpeed [%.0f %%]" {resolvbus="Drehzahl Relais 1"}

This item will show the system time if supported by your device.

DateTime time "Zeit [%1$tA, %1$td.%1$tm.%1$tY]" {resolvbus="Systemzeit"}

Tested devices

The following devices have been testes by various users and it can be confirmed that they are working

DEVICE DEVICE ID
Viessmann Vitosolic 200 7321
Resol DeltaSol BX 7421
Resol DeltaSol BS/DrainBack 4278

Installation


User Interfaces


Community

(link to openHAB forum)

Development



Misc


Samples

A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.

Please update the wiki if you do come across any out of date information.

Use case examples

Collections of Rules on a single page

Single Rules

Scripts


Release Notes

Clone this wiki locally