Skip to content

Latest commit

 

History

History
536 lines (412 loc) · 21.5 KB

CHANGELOG.md

File metadata and controls

536 lines (412 loc) · 21.5 KB
Raw

Change Log

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

Unreleased

  • #423 Add better defaults for log format when timestamp is available

v0.3.10 - 2023-08-01

  • #417 Release probe-run v0.3.10
  • #416 Add support for log_format option for defmt decoder
  • #410 Simplify canary
  • #405 Also enable merge queue for changelog enforcer
  • #404 Switch from bors to merge queue
  • #402 Do not panic if locations do not contain the frame

v0.3.9 - 2023-05-05

  • #403 Release probe-run v0.3.9
  • #399 Update link shown in error message
  • #398 Handle reset vector not pointing to ELF symbol

v0.3.8 - 2023-04-12

  • #395 Bump defmt-decoder to 0.3.6 due to yanked version 0.3.5
  • #389 Clean fn run_target_program up

v0.3.7 - 2023-03-29

  • #390 Release probe-run v0.3.7
  • #385 Update snapshot tests and test stack canary
  • #384 Satisfy clippy
  • #383 Fix unwinding
  • #381 Add feature ftdi to enable ftdi debuggers
  • #380 Add --erase-all flag
  • #379 Update to probe-rs v0.17
  • #378 Update to probe-rs v0.16

v0.3.6 - 2023-01-23

  • #375 Release probe-run v0.3.6
  • #373 Update to probe-rs v0.14
  • #371 Add "missing drivers" to troubleshooting section
  • #366 Update CI

v0.3.5 - 2022-10-07

  • #357 Update to clap 4.0
  • #349 Add PROBE_RUN_SPEED env variable
  • #345 Update dev-dependency serial_test
  • #344 Replace pub(crate) with pub
  • #343 Mark v0.3.4 as released in CHANGELOG.md
  • #353 Add --verify option to verify written flash

v0.3.4 - 2022-08-10

  • #342 Release probe-run 0.3.4
  • #339 Simplify fn round_up
  • #337 Clean snapshot tests
  • #335 Add unit tests for fn round_up
  • #334 Simplify snapshot tests
  • #333 Clean up enum Outcome
  • #331 Refactor stack painting
  • #330 Fix fn round_up
  • #329 Update probe-rs to 0.13.0 (does not yet implement 64-bit support)
  • #328 Simplify, by capturing identifiers in logging macros
  • #327 Optimize stack usage measuring
  • #326 Make use of i/o locking being static since rust 1.61.
  • #321 CI: Add changelog-enforcer
  • #320 Disable terminal colorization if TERM=dumb is set
  • #319 Warn on target chip mismatch
  • #317 Clarify "can't determine stack overflow" error message
  • #314 Clarify documentation in README
  • #305 Add option to disable double buffering while loading firmware
  • #293 Update snapshot tests to new TRACE output

v0.3.3 - 2022-03-14

Fixed

  • #311 fixed "probe-run does not work with some programs that have less than 10 KiB of stack space unless --measure-stack is available"

v0.3.2 - 2022-03-10 - YANKED

  • #303 Don't bail, but only warn if using --no-flash with defmt
  • #302 Make stack painting fast again! 🇪🇺
  • #301 Add way to pass chip description file
  • #300 Simplify verbose matching
  • #299 Fix and refactor fn extract_stack_info
  • #296 turn some println! into writeln!
  • #295 probe-run json output
  • #294 Update Cargo.lock

v0.3.1 - 2021-11-26

  • #287: unwind: skip FDEs with initial address of 0
  • #286: Update dependencies
  • #285: Update probe-rs and probe-rs-rtt to 0.12
  • #282: Include program counter value in backtrace when -v is passed
  • #281: Report flashing size using probe-rs's FlashProgress system
  • #280: Turn symbol demangling back on

v0.3.0 - 2021-11-09

  • #273: Update to Rust 2021 🎉
  • #267: Minimize dependencies by disabling default-features
  • #266: Recover from decoding-errors
  • #247: Print troubleshooting information on "probe not found" error
  • #264: Use new stream decoder API
  • #263: Set blocking mode to 0b10 (BLOCK_IF_FULL)
  • #257: Split "set rtt to blocking-mode" into function
  • #259: Update snapshot tests
  • #260: Fix CI on nightly
  • #254: Add support for measuring the program's stack usage
  • #248: Print dedicated message on control + c
  • #250: Backtrace options
  • #253: feat: add help message for JtagNoDeviceConnected
  • #251: Removes call to fill in user survey from readme.
  • #246: Enable deactivated tests for Windows

v0.2.5 - 2021-08-02

  • #244 Fix clippy warnings
  • #240 Link Knurling User Survey in README
  • #235 Update to probe-rs 0.11
  • #234 Feature-gate windows tests
  • #233 Some clarifications and corrections

v0.2.4 - 2021-06-17

  • #212 make unwind::target() infallible
  • #216 Fix EXC_RETURN detection on thumbv8
  • #218 add first, user-triggered snapshot tests
  • #219 add more explicit hint if elf path doesn't lead to an existing file
  • #221 Obtain git-version from macro, instead of custom build-script
  • #222 refactor the huge "main" function into smaller functions + modules
  • #224 target_info: print ram region again
  • #225 cli::tests: rstest-ify tests for fn extract_git_hash
  • #226 CI: Run tests and clippy
  • #228 Remove unused file utils.rs

v0.2.3 - 2021-05-21

Improvements

  • #193 Check PROBE_RUN_IGNORE_VERSION on runtime
  • #199 Add column info to backtrace
  • #200 Highlight frames that point to local code in backtrace
  • #203 + #209 + #210 Add --shorten-paths
  • #204 Make 'stopped due to signal' force a backtrace
  • #207 Read as little stacked registers as possible during unwinding

Docs

  • #190 README: Replace ${PROBE_RUN_CHIP} in code example
  • #192 + #194 README: Add installation instructions for Fedora and Ubuntu

Fixes

  • #206 Fix unwinding exceptions that push FPU registers onto the stack

Internal improvements

  • #197 Refactor "print backtrace" code
  • #211 mv backtrace.rs backtrace/mod.rs

v0.2.2 - 2021-05-06

Improvements

  • #163 Report exit reason, make backtrace optional
  • #171 Introduce even more verbose log level
  • #174 Let developers skip defmt version check
  • #179 Limit backtrace length, make limit configurable
  • #184 Add some bounds checking to unwinding

Docs

  • #161 Remind the user that the bench profile should be also overridden
  • #181 README: add copypasteable example how to run from repo
  • #183 README: Add troubleshooting for use with RTIC

Fixes

  • #162 Remove panic-probe

Internal Improvements

  • #165 Various simplifications
  • #175 Run cargo fmt -- --check in CI

v0.2.1 - 2021-02-23

  • #158 Fix Ctrl+C handling

v0.2.0 - 2021-02-22

New Features

  • #153 Update to defmt 0.2.0
  • #152 Allow selecting a probe by serial number
  • #149 Update and deduplicate dependencies

Fixes

  • #141 Address Clippy lints

v0.1.9 - 2021-01-21

Added

  • #126 print a list of probes when multiple probes are found and none was selected
  • #133 removes supported defmt version: c4461eb1484... from -h / --help output

Fixed

  • #129 reject use of defmt logs and the --no-flash flag.
  • #132 Make use of the new defmt-logger crate
  • #134 updates probe-run's defmt dependencies in order to make new features accessible

v0.1.8 - 2020-12-11

Added

  • #119 probe-run has gained a --connect-under-reset command line flag. When used, the probe drives the NRST pin of the microcontroller to put it in reset state before establishing a SWD / JTAG connection with the device.

Fixed

  • #117 wait for breakpoint before switching RTT from non-blocking mode to blocking mode.

v0.1.7 - 2020-11-26

Fixed

  • #114 pin hidapi dependency to 1.2.3 to enable macOS builds
  • #112 defmt decode errors are now reported to the user
  • #110 colorize assert_eq! output

v0.1.6 - 2020-11-23

Fixed

  • #109 <exception entry> is not printed twice in the backtrace when the firmware aborts.

Changed

  • #108 probe-rs has been bumped to version 0.10. This should fix some ST-LINK bugs and expand device support.

v0.1.5 - 2020-11-20

  • #106 probe-run now reports the program size
  • #105 probe-run's --defmt flag is now optional. probe-run will auto-detect the use of the defmt crate so the flag is no longer needed.
  • #259 building the crates.io version of probe-run no longer depends on the git command line tool (fixed [#256])
  • #264 probe-run doesn't panic if log message is not UTF-8

v0.1.4 - 2020-11-11

Added

  • #30 added a --no-flash flag to run a program without re-flashing it
  • #40 added (--help) documentation to the many CLI flags
  • #33 added canary-based stack overflow detection
  • #38 added file location information to log messages
  • #41 the PROBE_RUN_CHIP env variable can be used as an alternative to the --chip flag
  • #49 --list-probes and --probe flags to list all probes and select a particular probe, respectively
  • #55 added more precise stack overflow detection for apps linked with flip-link
  • #57 added module location information to log messages
  • #63 added file location information to the stack backtrace
  • #83 added git info to the --version output
  • #88 added --speed flag to set the frequency of the probe
  • #98 the output of --version now includes the supported defmt version

Fixed

  • #28 notify the user ASAP that RTT logs were not found in the image
  • #50 fixed a bug that was causing an infinite stack backtrace to be printed
  • #51 fixed the handling of Ctrl-C
  • #77 flush stdout after each write; fixes a bug where output was not printed until a newline was sent from the device using non-defmt-ed RTT

Changed

  • #25 increased RTT attach retries, which is sometimes needed for inter-operation with rtt-target
  • #44 improve diagnostics when linker script is missing
  • #53, #60 the output format of logs
  • #55, #64 all hard faults make probe-run exit with non-zero exit code regardless of whether panic-probe was used or not
  • #69 probe-run now changes the RTT mode to blocking at runtime, right after RAM initialization

v0.1.3 - 2020-08-19

Changed

  • Fixed outdated comment in readme

v0.1.2 - 2020-08-19

Added

  • Support for the thumbv7em-none-eabihf target.

Changed

  • Bumped the probe-rs dependency to 0.8.0
  • Cleaned up CLI documentation

v0.1.1 - 2020-08-17

Added

  • Added setup instructions to check that there's enough debug info to make the unwinder worker

Changed

  • Improved the error message produced when the unwinder fails

v0.1.0 - 2020-08-14

Initial release