1.3.1

What's Changed

• UNO R4 WiFi: SATSE add serialNumber(byte sn[]) API by @pennam in #386
• Portenta C33 WiFi: get STA MAC address as default by @pennam in #385
• WiFiS3: add WL_MAC_ADDR_LENGTH definition by @pennam in #384
• SE050 add api to read serial number bytes by @pennam in #383
• Add SERIAL_PORT_HARDWARE by @marqdevx in #392
• WiFiC3: replace old build script by @facchinm in #187
• Add support for scrolling text asynchronously by @misaz in #312
• uno-r4-usb-bridge: include commands of 0.5.0 pre-release by @pennam in #397
• WiFiS3: add WiFi.getTime() by @pennam in #394
• Add WiFi.ping() by @andreagilardoni in #395
• WifiS3 added method to get uint32 version by @andreagilardoni in #326
• WiFiS3 At improvements by @andreagilardoni in #349
• Preferences fixes by @andreagilardoni in #393
• Arduino_FreeRTOS: automatically start loop by @facchinm in #369
• Non blocking ota download by @andreagilardoni in #325
• Initialize local variable for AP config by @alrvid in #400
• TextWithArduinoGraphics: add note about ArduinoGraphics dependency by @pennam in #401
• WiFiS3 ping add missing parameter by @pennam in #403
• examples: uno r4 wifi fix print about required firmware version by @pennam in #402
• Reduce WiFiS3 warnings by @pennam in #404
• Fix for Serial flush() returning before transmission has completed by @pennam in #405
• Preferences: adding missing return statement by @andreagilardoni in #410

New Contributors

• @marqdevx made their first contribution in #392
• @misaz made their first contribution in #312

Full Changelog: 1.2.2...1.3.1

1.3.0

What's Changed

• UNO R4 WiFi: SATSE add serialNumber(byte sn[]) API by @pennam in #386
• Portenta C33 WiFi: get STA MAC address as default by @pennam in #385
• WiFiS3: add WL_MAC_ADDR_LENGTH definition by @pennam in #384
• SE050 add api to read serial number bytes by @pennam in #383
• Add SERIAL_PORT_HARDWARE by @marqdevx in #392
• WiFiC3: replace old build script by @facchinm in #187
• Add support for scrolling text asynchronously by @misaz in #312
• uno-r4-usb-bridge: include commands of 0.5.0 pre-release by @pennam in #397
• WiFiS3: add WiFi.getTime() by @pennam in #394
• Add WiFi.ping() by @andreagilardoni in #395
• WifiS3 added method to get uint32 version by @andreagilardoni in #326
• WiFiS3 At improvements by @andreagilardoni in #349
• Preferences fixes by @andreagilardoni in #393
• Arduino_FreeRTOS: automatically start loop by @facchinm in #369
• Non blocking ota download by @andreagilardoni in #325
• Initialize local variable for AP config by @alrvid in #400
• TextWithArduinoGraphics: add note about ArduinoGraphics dependency by @pennam in #401
• WiFiS3 ping add missing parameter by @pennam in #403
• examples: uno r4 wifi fix print about required firmware version by @pennam in #402
• Reduce WiFiS3 warnings by @pennam in #404
• Fix for Serial flush() returning before transmission has completed by @pennam in #405

New Contributors

• @marqdevx made their first contribution in #392
• @misaz made their first contribution in #312

Full Changelog: 1.2.2...1.3.0

1.2.2

What's Changed

• Add missing return statement in SyncCanMsgRingbuffer::isFull() by @Wetmelon in #368
• Core Renesas / PWM / fixing wrong pulse setting by @maidnl in #372
• Exclude OPTA_* from unor4 package by @pennam in #365
• Fix stop bit time. by @iabdalkader in #374
• Core renesas / Storage library, Fix for #366 (Name conflict in library Storage) by @maidnl in #370
• package: remove opta variants from boards.txt before packaging by @pennam in #378

New Contributors

• @Wetmelon made their first contribution in #368

Full Changelog: 1.2.1...1.2.2

Release 1.2.1

What's Changed

• Clearing canvas buffer in ArduinoLEDMatrix::clear() in addition to frame buffer by @stefanmarks in #335
• Display useful message when Linux post-install script has insufficient permissions by @per1234 in #334
• Publish Opta expansions variants by @facchinm in #342
• Remove old and unused portenta_h33 e2studio project by @pennam in #340
• WiFiS3: implement setTimeout functionality by @pennam in #339
• Fix in formula for creating frequency from MIDI note by @x-1xps in #348
• Fix RTC resetting after reboot by @andreagilardoni in #347
• WiFiS3: Skip unaligned responses from WiFi chip by @pennam in #353
• Portenta C33 UNO R4 minima UNO R4 WiFi allow usage of TRNG by @pennam in #338

New Contributors

• @stefanmarks made their first contribution in #335
• @x-1xps made their first contribution in #348

Full Changelog: 1.2.0...1.2.1

Release 1.2.0

What's Changed

• Add hourglass animation to the LED matrix gallery by @alranel in #279
• backtrace: remove spurious file from compiling by @facchinm in #258
• UNOR4: rebuild libfsp with I2C patch by @facchinm in #257
• CNetIf - added config method to apply new static IP settings for WiFi and Ethernet by @JAndrassy in #209
• WiFiC3 - config(ip) didn't set default value for DNS IP by @JAndrassy in #199
• Revert "Wire: unlock the bus on begin()" by @facchinm in #286
• Fix return type of ArduinoLEDMatrix::begin() by @mast-eu in #282
• Use correct datatype for return value of FspTimer::get_available_timer() by @mast-eu in #288
• Correct name of library in file header by @alrvid in #289
• Fix for flexible CAN baud rate by @fastbike in #296
• [Arduino_CAN] fix regression introduced in #296. by @aentinger in #300
• Update "Port mn Pin Function Select Register" in SVD file. by @embedded-kiddie in #305
• Add a clear() method to the LED matrix library by @alranel in #280
• Arduino_LED_Matrix: add to CI and fix ArduinoGraphics begin() by @facchinm in #313
• libraries/SoftwareSerial: Fix ring buffer data type. by @iabdalkader in #314
• Fix buffer-overflow assigning global Wire instances. by @aentinger in #317
• Adding Generic Interrupt function to IRQManager by @delta-G in #316
• libraries: Fix possible buffer/stack overflows in multiple libraries. by @iabdalkader in #318
• Fix for I2C bus not always working correctly after a slave device call end() by @maidnl in #319
• Add compiler.xxx.extra_flags to receipes in platform.txt by @isidromv in #323
• Fix Inconsistent Sleep Current by relocating the Ethernet Clock AGT Timer by @cristidragomir97 in #322
• WiFiS3 Modem: change write and write_nowait format argument to const char * by @pennam in #285
• WiFiS3: WiFiWebClientSSL fix information about CA Root certificate by @pennam in #278
• WiFiS3 Udp, Client: avoid RX_BUFFER_DIM redefinition by @pennam in #284
• bounds check for last_interrupt_index by @delta-G in #320
• Add RTC alarm setter without callback by @sebromero in #324
• Clear Unused Parameter Warnings in EEPROM examples by @delta-G in #311
• Add I2S support. by @iabdalkader in #306
• define digitalPinHasPWM for UNOWIFIR4 & MINIMA by @isidromv in #287
• WifiS3 Wificlient issues by @andreagilardoni in #309
• Publish 1.2.0 by @facchinm in #332

New Contributors

• @mast-eu made their first contribution in #282
• @fastbike made their first contribution in #296
• @embedded-kiddie made their first contribution in #305
• @iabdalkader made their first contribution in #314
• @isidromv made their first contribution in #323
• @cristidragomir97 made their first contribution in #322

Full Changelog: 1.1.0...1.2.0

1.1.0

What's Changed

• CAN Filter and Mask by @Woodwarth in #170
• WiFiC3 - don't start DHCP in begin, if static IP is configured by @JAndrassy in #179
• WiFiS3 - static IP config, fix automatic DNS IP by @JAndrassy in #173
• RTC - Replace Serial.print()s from ISR functions in example Sketches by @jacobhylen in #178
• unor4: fix incorrect BSP_CLOCK_CFG_SUBCLOCK_POPULATED defines by @facchinm in #169
• Fix: provide include path to where the API folder is stored. by @aentinger in #188
• Allow Wire to switch from master to slave and vice versa by @maidnl in #191
• analogReference: add getter for AR_INTERNAL if defined at variant level by @facchinm in #190
• fixing millis rollover bug x2 by @delta-G in #196
• WiFiC3 - dnsIP(n) getter added by @JAndrassy in #176
• Add gallery of icons and animations by @alranel in #198
• Fix: Increase accuracy of "delay()" routine. by @aentinger in #203
• Provide frequency/duty_cycle API for PwmOut::begin(...). by @aentinger in #204
• WiFiS3 WiFiServer operator bool by @JAndrassy in #140
• WiFiS3 example WiFiPagerServer by @JAndrassy in #133
• WiFiC3 - STA BSSID getter fix by @JAndrassy in #177
• WiFiC3 example WiFiPagerServer by @JAndrassy in #185
• WiFiS3/C3 - add legacy wl_enc_type constants aliases by @JAndrassy in #175
• Fix: compilation of "ESP32_Test.ino" fails due to non-existent function "begin". by @aentinger in #205
• WiFiC3 - macAddress() return normal bytes ordering by @JAndrassy in #184
• WiFiS3 - macAddress() return normal bytes ordering by @JAndrassy in #183
• LwipClient - operator bool fix by @JAndrassy in #208
• ESPHost library - protobuf-c.c as source and not as precompiled by @JAndrassy in #213
• Ethernet - standard MACAddress getter with a parameter by @JAndrassy in #214
• ESPHost library - make the example work by @JAndrassy in #227
• Prevent multiple inclusion by adding include guards. by @aentinger in #231
• Fix: prevent artefacts from appearing on the screen during a SCROLL_LEFT. by @aentinger in #232
• Ethernet.begin - fix parameters ordering by @JAndrassy in #222
• EthernetC33 debugging by @JAndrassy in #223
• Fixed hash algo to be selected based on input and not hardcoded by @pennam in #229
• WiFiS3 fix Modem timeout at ERROR response by @JAndrassy in #147
• Fixed encoding of KeySlot ID. by @lagosantol in #217
• Define the compiler.optimization_flags allows for specifying the desired optimization level during compilation. by @aentinger in #238
• Fix typo by @y-tsubuku in #245
• Debugger support by @facchinm in #237
• fix for #244, byte-order wrong for LSBFIRST buffer transfers by @RudolphRiedel in #246
• WiFiSSLClient: remove unused function declaration by @pennam in #255
• Docs: UNO R4 WiFi fix command to flash bootloader by @pennam in #252
• unor4wifi: update firmware submodule by @pennam in #261
• Add WiFi Preferences support by @pennam in #239
• Add software AT secure element support by @pennam in #253
• WiFiS3 WiFiServer::accept() by @JAndrassy in #144
• WiFiS3 client connect timeout by @JAndrassy in #148
• OTAUpdate: do not use Error enum to return error codes by @pennam in #197
• Add AES encrypt/decrypt and HMAC support for SE05X by @pennam in #242
• Fix: do not randomly clear the first line of the LED matrix. by @aentinger in #260
• WiFiSSLClient: add setEccSlot method to configure client private key and certificate by @pennam in #254
• ESPHost - fix softAP password check by @JAndrassy in #248
• WiFiS3 let WiFi.h include WiFiClient, WiFiUDP, WiFiServer by @JAndrassy in #224
• WiFiS3 WiFiSSLClient: avoid duplicated AT messages by @pennam in #266
• Update WIFI_FIRMWARE_LATEST_VERSION to 0.4.1 by @pennam in #267
• OTAUpdate: change root certificate to download binary from download.arduino.cc by @pennam in #269
• Publish 1.1.0 by @pennam in #275

New Contributors

• @Woodwarth made their first contribution in #170
• @delta-G made their first contribution in #196
• @alranel made their first contribution in #198
• @lagosantol made their first contribution in #217
• @y-tsubuku made their first contribution in #245

Full Changelog: 1.0.5...1.1.0

Release 1.0.5

What's Changed

• C33 SSLClient: fix certificate loading from filesystem by @pennam in #124
• Add method to allow the GPT Timer period not to be buffered. by @KurtE in #131
• Add OPAMP library for Uno R4 (WiFi, Minima) by @maxgerhardt in #97
• WiFiS3 WiFiClient connect by IP bug fix by @JAndrassy in #129
• C33: fix RTC functionality by @facchinm in #125
• platform.txt - core platform path for tinyusb by @JAndrassy in #122
• Fix the incorrect comments in the examples of the WIFI S3 library. by @eMUQI in #136
• Fix for RTC not allowing matching more than one field on Alarm by @maidnl in #156
• Portenta C33: Msd QSPI examples, mount both partition by @pennam in #137
• Add a USB mass storage disconnected callback by @alrvid in #142
• Avoid shadowing Stream.setTimeout by @pennam in #141
• Fix WiFiStation buffer management by @pennam in #134
• Usb post initialization function and tinyusb fixes by @maidnl in #128
• SFU add download function and OTA example by @pennam in #157
• mbedtls: enable server name indication extension by @pennam in #159
• Fix memory corruption bug by @alrvid in #164
• UNO WiFi R4 OTA examples: fix download return value print by @pennam in #165
• Ethernet driver and LWIP wrapper fixes by @andreagilardoni in #151
• Publish 1.0.5 by @facchinm in #167

New Contributors

• @eMUQI made their first contribution in #136
• @andreagilardoni made their first contribution in #151

Full Changelog: 1.0.4...1.0.5